2 1/2 inch length Ball Bearings
A ball bearing is a type of rolling-element bearing that uses spherical balls to maintain separation between two concentric rings, called races, allowing for smooth relative motion between machine parts while minimizing friction. The primary function of a ball bearing is to reduce rotational friction and support both radial (perpendicular to the shaft) and axial (along the shaft) loads. It achieves this by using at least two races to contain the balls and transmit the loads through them: typically, one race is fixed while the other rotates with the shaft or hub
5 results, (click on any line for more information)
Buy Ball Bearings from one of our FCH Network Members | ||||||||
---|---|---|---|---|---|---|---|---|
Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
Jackson | MS | Ball Bearings, Balls, Bearing Mounts | Steel | Zinc/Clear | 3/16 x 2 1/2 | pin ball detent with split ring | 3 |
|
Jackson | MS | Ball Bearings, Balls, Bearing Mounts | Steel | Zinc/Clear | 5/8 x 2 1/2 | pin ball detent with split ring | 11 |
|
OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Aluminum | Plain | 10 x 2 1/2 | r&k richmond wheel wheel size 10 x2-1/2 wheel material rubber on aluminum ball bearing bearing bore 5/8 wheel bore less bearing 2 hub length 2-3/4 load capacity 800 lbs. temp rating-30f to +180f. 5-0230 | 1 |
|
OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 10 x 2 1/2 | 10 x 2-1/2 a-1 large ball bearing | 2 |
|
OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Rubber, Buna-N, Neoprene etc. | Plain | 10 x 2 1/2 | wheel size 10 x 2-1/2 mat moldon rubber on cast iron bearing plain bore bearing bore 1 bore less bearing 1-13/16 hub length 2-3/4 load cap 790 lbs temp rt-45 to +160 f | 2 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.