FCH Member Advertisement
FCH News
1 inch length Ball Bearings
A ball bearing is a type of rolling-element bearing that uses spherical balls to maintain separation between two concentric rings, called races, allowing for smooth relative motion between machine parts while minimizing friction. The primary function of a ball bearing is to reduce rotational friction and support both radial (perpendicular to the shaft) and axial (along the shaft) loads. It achieves this by using at least two races to contain the balls and transmit the loads through them: typically, one race is fixed while the other rotates with the shaft or hub
24 results, (click on any line for more information)
| Buy Ball Bearings from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Endries | WI | Ball Bearings, Balls, Bearing Mounts | Silicon Bronze | Plain | 5/8 x 1 x 1/8 | 5/8 idx1 odx1/8 thust bearing brz | 995 |
|
| IndexFast | CA | Ball Bearings, Balls, Bearing Mounts | Brass | Black Oxide | 149 x 1 | 149 1 blk ball type tip 1/black | inquire |
|
| GLF | OH | Ball Bearings, Balls, Bearing Mounts | Silicon Bronze | Plain | 1/2 x 1 x 1/8 | 1/2 x 1 x 1/8 thrust bearing oil embedded bronze | 600 |
|
| Jackson | MS | Ball Bearings, Balls, Bearing Mounts | Steel | Zinc/Clear | 3/16 x 1 | pin ball detent with split ring | 19 |
|
| Jackson | MS | Ball Bearings, Balls, Bearing Mounts | Steel | Zinc/Clear | 1/4 x 1 | pin ball detent with split ring | 4 |
|
| Jackson | MS | Ball Bearings, Balls, Bearing Mounts | Steel | Zinc/Clear | 5/8 x 1 | pin ball detent with split ring | 14 |
|
| Jackson | MS | Ball Bearings, Balls, Bearing Mounts | Steel | Zinc/Clear | 3/8 x 1 | pin ball detent with split ring | 4 |
|
| SWACO | OH | Ball Bearings, Balls, Bearing Mounts | Plain | 3 x 1 | 3l1ff-115 nyliner bearing black | 14998 |
| |
| SWACO | OH | Ball Bearings, Balls, Bearing Mounts | 970601/6 x 1 | 970601/6l1-ff nyliner bearing | 1 |
| ||
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Plastic | Zinc/Clear | 4 x 1 | wheel wheel sz 4 x 1 wheel mat so ft rubber bore id 5/16 bearing delrin hub length 1-1/8 load cap 210lbs. | 75 |
|
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Rubber, Buna-N, Neoprene etc. | Plain | 2 x 1 | wheel sz 2 x 1 mat so ft rubber bearing plain bore bore id 1/4 hub length 1-1/64 load cap 90 lb temp rt-40 to +158 f | 52 |
|
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Rubber, Buna-N, Neoprene etc. | Plain | 2 x 1 | wheel sz 2 x 1 mat so ft rubber bearing plain bore bore id 1/4 hub length 1-1/64 load cap 90 lb temp rt-40 to +158 f | 3 |
|
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Plain | 2 1/2 x 1 | wheel wheel size 2-1/2 x 1 wheel material sintered iron bearing plain bearing bore 5-16 hub length 1-3/8 load capacity 200 lbs. temp rating-40 f to +500 f | 11 |
| |
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Rubber, Buna-N, Neoprene etc. | Plain | 2 x 1 | wheel sz 2 x 1 mat hard rubber bearing plain bore bore id 1/4 hub length 1-1/64 load cap 150 lbs temp rt-40 to +158 f | 46 |
|
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Plain | 1/8 x 1 | 1 x 1 1/8 x 1 du series sleeve bearing | 229 |
| |
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Steel | Zinc/Clear | 3 x 1 | wheel sz 3 x 1 mat flange cast iron bearing plain bore bore id 1-3/16 hub length 2-3/16 load cap 700 lbs temp rt up to +800 f | 1 |
|
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Plain | 1/2 x 1 x .062 | 1/2 id x 1 od x .062 long uhmw thrust bearing | 3010 |
| |
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Plain | 3/8 x 1 | cstr2.25 in metal ball3/8x1 grp stm | 16 |
| |
| OneMonroe | MN | Ball Bearings, Balls, Bearing Mounts | Plain | 1-3/8 x 1 x 2 | 1-3/8 od x 1 id x 2 l roller bearing | 11 |
| |
| OneMonroe | MN | Ball Bearings, Balls, Bearing Mounts | Plain | 1-3/8 x 1 x 2 | 1-3/8 od x 1 id x 2 l roller bearing | 11 |
| |
| MTP | CA | Ball Bearings, Balls, Bearing Mounts | 9/16 x 1 | 9/16x1 needle roller thrust bearing | stock |
| ||
| MTP | CA | Ball Bearings, Balls, Bearing Mounts | 9/16 x 1 x 1/32 | 9/16x1 x 1/32 washer for needle roller thrust bearing | stock |
| ||
| PENCOM | Ont | Ball Bearings, Balls, Bearing Mounts | Steel | Plain | 3/4 x 1 x 1/2 | 3/4idx1odx1/2lg sleeve bearing sae660 brz pln cb-1216-04 | 100 |
|
| All Size | TX | Ball Bearings, Balls, Bearing Mounts | 1/2 x 1 x 3 | 1/2 x 1 x 3 end mill 4 flute carbide altin coated ball nose long domestic | 6 |
| ||
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
