Ground & Polished Shafting
Ground & Polished Shafting is a round shaft or rod, ground and polished to a specified diameter. The purpose of the shaft is usually to allow a pulley or sprocket or gear to be locked in place on the shaft (by welding, screwing, etc.) so that mechanical power can be transmitted to another mechanical device. However, a ground shaft may also be used as an axle for a wheel or other rotating device.
540 Turned, Ground & Polished Shafting, showing 200, (click on any line for more information)
Buy Ground & Polished Shafting from one of our FCH Network Members | ||||||||
---|---|---|---|---|---|---|---|---|
Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
GLF | OH | Turned, Ground & Polished Shafting | Steel | Galvanized | 1/4 | 1/4 push nut 1/4 shaftx15/16 od stl hdg () () () | 5000 |
|
Weaver | WA | Turned, Ground & Polished Shafting | #23-01 | #23-01 hair pin 1/16-5/64 spreadx1/8 shaft | 475 |
| ||
Weaver | WA | Turned, Ground & Polished Shafting | #23-02 | #23-02 hair pin 7/64-9/64 spreadx1/4 shaft | 475 |
| ||
Weaver | WA | Turned, Ground & Polished Shafting | #23-03 | #23-03 hair pin 1/8-7/32 spreadx1/4 shaft | 475 |
| ||
Weaver | WA | Turned, Ground & Polished Shafting | #23-04 | #23-04 hair pin 1/8-1/4 spreadx5/16 shaft | 375 |
| ||
Weaver | WA | Turned, Ground & Polished Shafting | #23-05 | #23-05 hair pin 3/16-5/16 spreadx3/8 shaft | 475 |
| ||
NAPPCO | TX | Turned, Ground & Polished Shafting | 3/4 x 17 | tube shaft 3/4 x 17 (660-MFG SPECIAL PARTS) (660-MFG SPECIAL PARTS) (660-MFG SPECIAL PARTS) (660-MFG SPECIAL PARTS) (660-MFG SPECIAL PARTS) (660-MFG SPECIAL PARTS) (660-MFG SPECIAL PARTS) (660-MFG SPECIAL PARTS) (660-MFG SPECIAL PARTS) (660-MFG SPECIAL PARTS) (660-MFG SPECIAL PARTS) (660-MFG SPECIAL PARTS) (660-MFG SPECIAL PARTS) (660-MFG SPECIAL PARTS) (660-MFG SPECIAL PARTS) (660-MFG SPECIAL PARTS) (660-MFG SPECIAL PARTS) (660-MFG SPECIAL PARTS) (660-MFG SPECIAL PARTS) | 400 |
| ||
Hayes | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8 x 12 | 3/8 x 12 precision shafting 18-8ss | 13 |
|
Hayes | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8 x 7 1/4 | 3/8 x 7 1/4 precision shafting 18-8ss | 5 |
|
Cal Fastenrs | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Zinc/Clear | .174 | .174 shaft size #8x.031 washer-18-8 304 steel z4-8 | 930 |
|
Jay-Cee | MI | Turned, Ground & Polished Shafting | #22 | #22 shaft for bp-60 tool | inquire |
| ||
Endries | WI | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 216 1/2in shaft x1-15/16 hair pin cotter trivalent clear zinc | 790 |
| |
Century | FL | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 21250 headed roller shaft stl rohs compl (ZINC CLR PER PRINT .1875 X 1.7X.38X.06) (ZINC CLR PER PRINT .1875 X 1.7X.38X.06) | 3794 |
| |
Olander | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | x 24 | .2184 +0/-.0002 x 24 shaft 303sst () () | 481 |
|
Olander | CA | Turned, Ground & Polished Shafting | 316, 317, A4 Stainless | Plain | x 6 | .2500 +.000/-.0002 x 6 shaft 316 sst () () | 136 |
|
Olander | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | .24975 +0/-.0001 x 1.375 shaft 303sst () () | 299 |
| |
Olander | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 15.974 | 15.974mm +0/-.005 x 900mm shaft 303sst () () | 44 |
|
Olander | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | x 2.500 | .1247 +0/-.0002 x 2.500 shaft 303sst () () | 157 |
|
Olander | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | x 2.250 | .1247 +0/-.0002 x 2.250 shaft 303sst () () | 135 |
|
Olander | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | x 2.000 | .2497 +0/-.0002 x 2.000 shaft 303sst () () | 63 |
|
Olander | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | x 3.750 | .1247 +0/-.0002 x 3.750 shaft 303sst () () | 61 |
|
Olander | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | x 36 | .7497 +0/-.0004 x 36 shaft 303sst () () | 2 |
|
Olander | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | x 2.000 | .2497 +0/-.0002 x 2.000 shaft 303sst () () | 25 |
|
Olander | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3.993 | 3.993mm +0/-.005 x 40 prec shaft 303sst () () | 28 |
|
Olander | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | x 1.375 | .1247 +0/-.0002 x 1.375 shaft 303sst () () | 33 |
|
Endries | WI | Turned, Ground & Polished Shafting | Steel | Zinc/Yellow | 213 | 213 hair pin cotter yellow zinc (1/4 shaftx1-3/16) | 2158 |
|
Endries | WI | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 221 | 221 (oe) hair pin cotter zinc (1/8 shaftx19/32) | 11000 |
|
Endries | WI | Turned, Ground & Polished Shafting | 5 | cap shaft mcs autoset 5 | 2 |
| ||
Endries | WI | Turned, Ground & Polished Shafting | 45 | drive shaft kj45 | 1 |
| ||
Endries | WI | Turned, Ground & Polished Shafting | shaft | 1 |
| |||
Endries | WI | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 21-09 | 21-09 hair pin cotter zinc (1-1/8-1-1/2 shaftx5) | 400 |
|
Endries | WI | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 236 | 236 hair pin cotter zinc (3/16 shaftx3/4) | 668 |
|
Endries | WI | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | b3-5 (oe) .253x.373 18-8 304 steel shaft spacer | 65 |
| |
Endries | WI | Turned, Ground & Polished Shafting | 5 | e-ring mcs cap shaft autoset 5 | 4 |
| ||
Endries | WI | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 203 | 203 hair pin cotter zinc (1/4 shaftx1-5/8) | 1800 |
|
Endries | WI | Turned, Ground & Polished Shafting | 3 x 1 | 3x1 flap wheel 60 grit 1/4 round shaft mounted | 15 |
| ||
Endries | WI | Turned, Ground & Polished Shafting | drive shaft for spp tool | 2 |
| |||
Endries | WI | Turned, Ground & Polished Shafting | Steel | Plain | six-inch acid brushes tin shaft with natural or nylon bristles | 144 |
| |
Endries | WI | Turned, Ground & Polished Shafting | Plastic | Plain | nut push-on 5/16 shaft black plastic/spring stl | 422 |
| |
Endries | WI | Turned, Ground & Polished Shafting | 3 x 1 | 3x1 flap wheel 120 grit 1/4 round shaft mounted | 5 |
| ||
Endries | WI | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 208 | 208 hair pin cotter zinc (7/8 shaftx3-3/4) | 3475 |
|
Endries | WI | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/32 | 3/32 screw size .093x.203x.01 18-8 s/s steel shaft spacer .093-0.000/+.005x.203 +/-.005x.010 +/-.001 | 25 |
|
Mansco | MI | Turned, Ground & Polished Shafting | Steel | Phosphate | 1/4 | 1/4 shaft external retainig ring blk phos stacked | 8640 |
|
Mansco | MI | Turned, Ground & Polished Shafting | Steel | Black Oxide | 1 x 1 | 1 double split shaft collar blk ox 1/box | 148 |
|
Liberty | IL | Turned, Ground & Polished Shafting | Steel | Phosphate | c rectangular push on nut for 1/2 shaft phos | 26,000 |
| |
Komar | IL | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 5/64 x 1 3/16 | 5/64x1 3/16 oa. hairpin cotter-3/8 shaft zinc | 1100 |
|
Komar | OH | Turned, Ground & Polished Shafting | Zinc/Black | .392 diam x .750 long shaft gear mounting black zinc (per print) | 5796 |
| ||
Komar | AR | Turned, Ground & Polished Shafting | Plain | 5/8 shaft diam (w1/4-28/2 places) 2.14 od x 1.30 thick compres | 10 |
| ||
Komar | AR | Turned, Ground & Polished Shafting | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | .625 x 1 round bar inconel(uns n07718) psq pump shaft qualit | 57 |
| |
Field Fas | IL | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | ring rtng ext stainless .625 shaft | 70 |
| |
Olander | CA | Turned, Ground & Polished Shafting | 5.992 | 5.992mm 0.000+/-0.005 x 900mm shaft () | 8 |
| ||
Fastener | OH | Turned, Ground & Polished Shafting | 2ba | cgw 2 backing pad turn on style 1/4 shaft | 8 |
| ||
Express | CA | Turned, Ground & Polished Shafting | 300 | ridgid shaft drive 300 | 1 |
| ||
SWACO | OH | Turned, Ground & Polished Shafting | 07555-01006 avdel drive shaft (m6) | 4 |
| |||
SWACO | OH | Turned, Ground & Polished Shafting | Steel | Plain | tx-75stpa 3/4 ext push-on shaft ring stl | 4000 |
| |
SWACO | OH | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5100-125h ret. ring for shaft 1.25 s/s | 805 |
| |
SWACO | OH | Turned, Ground & Polished Shafting | 07430-01110 avdel drive shaft | 6 |
| |||
SWACO | OH | Turned, Ground & Polished Shafting | 07555-00748 avdel 1/4 drive shaft | 3 |
| |||
SWACO | OH | Turned, Ground & Polished Shafting | 10 | 07555-00750 avdel drive shaft #10 | 5 |
| ||
SWACO | OH | Turned, Ground & Polished Shafting | 07555-01003 avdel 3mm drive shaft | 2 |
| |||
SWACO | OH | Turned, Ground & Polished Shafting | 07555-01008 avdel 8mm drive shaft | 1 |
| |||
Global | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 0.250 x 4.75 | a3-47 pic shaft 18-8 304 steel 0.250 odx4.75 l | 6< /td> |
|
Express | CA | Turned, Ground & Polished Shafting | 300 | ridgid shaft drive 300 | 1 |
| ||
Express | CA | Turned, Ground & Polished Shafting | 300 | ridgid shaft drive 300 | 1 |
| ||
Express | CA | Turned, Ground & Polished Shafting | 300 | ridgid shaft drive 300 | 1 |
| ||
Express | CA | Turned, Ground & Polished Shafting | 300 | ridgid shaft drive 300 | 1 |
| ||
NutsBolts | NE | Turned, Ground & Polished Shafting | 1 x 24.63 | 1x24.63 roller shaft 25 | 184 |
| ||
NutsBolts | NE | Turned, Ground & Polished Shafting | 3/4 x 8.63 | 3/4 x 8.63 roller shaft 9 | 994 |
| ||
NutsBolts | NE | Turned, Ground & Polished Shafting | 3/4 x 16.63 | 3/4 x 16.63 roller shaft 17 | 385 |
| ||
NutsBolts | NE | Turned, Ground & Polished Shafting | 3/4 x 12.63 | 3/4 x 12.63 roller shaft 13 | 110 |
| ||
NutsBolts | NE | Turned, Ground & Polished Shafting | 1 x 20.63 | 1x20.63 roller shaft 21 | 95 |
| ||
NutsBolts | NE | Turned, Ground & Polished Shafting | 1 x 32.63 | 1x32.63 roller shaft 33 | 360 |
| ||
NutsBolts | NE | Turned, Ground & Polished Shafting | 1 x 16.63 | 1x16.63 roller shaft | 1327 |
| ||
Exim | S'pore | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M0.250 x 1.000 | pin ground shaft s/s6.350 x 25.400 mm0.250 x 1.000 in | 134 |
|
Exim | S'pore | Turned, Ground & Polished Shafting | 400 Stainless (405, 410,416,420,430 etc.) | Passivated | pinion shaft s/s passivated b/end cham1.600 x 61.722 mm0.063 x 2.430 in | 37204 |
| |
Exim | S'pore | Turned, Ground & Polished Shafting | Steel | Black Oxide | 4.800 x 10.00 x 0.250 | ring shaft high carbon spring steel black oxide4.800 x 10.00 x 0.250 mm | 5000 |
|
Exim | S'pore | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | 0.025 | ring retainer s/s passivated toothlessfor non-threaded shafts (loose)shaft dia 0.156 od 0.260 ht 0.025 in | 3413 |
|
Exim | S'pore | Turned, Ground & Polished Shafting | M3-29 | linear shaft suj2dia 3.00 mm length 29.00 mmmisumi p/n sfu3-29 | 200 |
| ||
Exim | S'pore | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | M6 x 10 | front pivot shaft (female)m6 x 10mmstainless steel passivated | 10 |
|
Exim | S'pore | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | M6 x 14 | rear pivot shaft (female)m6 x 14 mmstainless steel passivated | 10 |
|
Exim | S'pore | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | M6 x 8.00 x 49.25 | tt pivot shaft female m6s/s passivated8.00 x 49.25 mm | 6 |
|
SII | IN | Turned, Ground & Polished Shafting | Steel | Black Oxide | kv pinion shaft 36 for 8070 pkt door blk 10/bx | 14 |
| |
SII | IN | Turned, Ground & Polished Shafting | Steel | Black Oxide | kv pinion shaft 48 for 8090 pkt door blk 10/bx | 11 |
| |
SII | IN | Turned, Ground & Polished Shafting | rev-a-shelf upper shaft f or 6072 6073 & 6272 post | 7 |
| |||
SII | IN | Turned, Ground & Polished Shafting | Steel | Black Oxide | kv pinion shaft 72 for 8090 pkt door blk 10/bx | 10 |
| |
WDMB | IA | Turned, Ground & Polished Shafting | Plain | 0.94 x 4.37 | thrrod shaft st 0.94x4.37 drw (W030) (W030) (#N/A) | 705 |
| |
WDMB | IA | Turned, Ground & Polished Shafting | 5/8 | ret shaft tinn 002015 4 fedst 5/8 (W030) | 2,900 |
| ||
JHP Fasteners | TX | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | .4997 x 2.0 | shafting prec ground .4997x2.0 303 s/s | 50 |
|
JHP Fasteners | TX | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | inner race shaft spacer 300 18-8 304 .250 idx.375 odx.010 thick | 100 |
| |
JHP Fasteners | TX | Turned, Ground & Polished Shafting | Brass | Nickel | panel bearing 1/4 shaft 3/8-32 thread. brass/nickel w/nut. | 1 |
| |
JHP Fasteners | TX | Turned, Ground & Polished Shafting | Aluminum | Anodized | shaft hanger .500 shaft od cast alum blk anodized | 2 |
| |
JHP Fasteners | TX | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | .035 | e-ring shaft diameter .375 od .680 thickness .035 18-8 304 steel | 20 |
|
IPC | VA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 2 3/8 | 18-8 304 steel hairpin cotter (for shaft 1/2-5/8 ) 2 3/8 long | 2,488 |
|
JHP Fasteners | TX | Turned, Ground & Polished Shafting | Brass | Nickel | panel bearing assembly 1/4 shaft 3/8-32 brass/nickel | 3 |
| |
JHP Fasteners | TX | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | hair pin clip .125-.187 shaft dia mb spring wire plated | 4941 |
| |
JHP Fasteners | TX | Turned, Ground & Polished Shafting | flange style 8mm shaft size | 18 |
| |||
NutsBolts | NE | Turned, Ground & Polished Shafting | 1 x 19.63 | 1 x 19.63 roller shaft |
| |||
NutsBolts | NE | Turned, Ground & Polished Shafting | 1 x 14.63 | 1 x 14.63 roller shaft |
| |||
NutsBolts | NE | Turned, Ground & Polished Shafting | 1 x 24.63 | 1 x 24.63 roller shaft |
| |||
NutsBolts | NE | Turned, Ground & Polished Shafting | 1 x 29.63 | 1 x 29.63 roller shaft |
| |||
NutsBolts | NE | Turned, Ground & Polished Shafting | 1 x 29.63 | 1x29.63 roller shaft 30 |
| |||
RePneu To | MI | Turned, Ground & Polished Shafting | M10 | drive shaft m10 | 1 |
| ||
RePneu To | MI | Turned, Ground & Polished Shafting | 1/4 | drive shaft 1/4 | 3 |
| ||
RePneu To | MI | Turned, Ground & Polished Shafting | #8-32 x 8 | drive shaft 8-32 & 8-36 | 10 |
| ||
RePneu To | MI | Turned, Ground & Polished Shafting | M8 | M8 drive shaft | 1 |
| ||
RePneu To | MI | Turned, Ground & Polished Shafting | feed drum shaft coupler | 1 |
| |||
RePneu To | MI | Turned, Ground & Polished Shafting | sa second shaft | 4 |
| |||
RePneu To | MI | Turned, Ground & Polished Shafting | sa second shaft | 2 |
| |||
MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M6 | shafting din 671 steel plain | inquire |
|
MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M5 | shafting din 671 steel plain | 7 |
|
MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M13 | shafting din 671 steel plain | inquire |
|
MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M12 | shafting din 671 steel plain | 5 |
|
MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M15 | shafting din 671 steel plain | 76 |
|
MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M20 | shafting din 671 steel plain | 115 |
|
MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M25 | shafting din 671 steel plain | 89 |
|
MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M40 | shafting din 671 steel plain | 24 |
|
MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M45 | shafting din 671 steel plain | 1 |
|
MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M65 | shafting steel plain | inquire |
|
MMCC | IL | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6 | shafting din 671 a2 s/s steel plain | 50 |
|
MMCC | IL | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10 | shafting din 671 a2 s/s steel plain | 56 |
|
MMCC | IL | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M11 | shafting din 671 a2 s/s steel plain | inquire |
|
MMCC | IL | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M14 | shafting din 671 a2 s/s steel plain | inquire |
|
MMCC | IL | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M15 | shafting din 671 a2 s/s steel plain | 9 |
|
MMCC | IL | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M19 | shafting din 671 a2 s/s steel plain | inquire |
|
MMCC | IL | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M30 | shafting din 671 a2 s/s steel plain | 1 |
|
MMCC | IL | Turned, Ground & Polished Shafting | Brass | Plain | M5 | shafting din 671 brass plain | inquire |
|
MMCC | IL | Turned, Ground & Polished Shafting | Brass | Plain | M7 | shafting din 61 brass plain | inquire |
|
MMCC | IL | Turned, Ground & Polished Shafting | Brass | Plain | M14 | shafting din 671 brass plain | 9 |
|
BoltCraft | NE | Turned, Ground & Polished Shafting | Grade A36 | 5/8 x 11.75 | 5/8 x 11.75 shaft machined and drilled per dwg. 15161026 matl a36 | 24 |
| |
Cal Fastenrs | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | .0625 x 1 | .0625x1 knurled shaft 300 series 18-8 304 steel parts to be made per drawing | 31,000 |
|
Cal Fastenrs | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | .0625 | .0625x.760 knurled shaft 18-8 304 steel parts to be made per drawing | 33,000 |
|
QFC | TX | Turned, Ground & Polished Shafting | flap wheel 1 1/2 x1 60 grit 1/4 round shaft 10/pkg | 10 |
| |||
MtrcSpec | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M7 | M7 shafting a-2 ss | stock |
|
MtrcSpec | CA | Turned, Ground & Polished Shafting | M30 | M30 shaft lock washer | stock |
| ||
MtrcSpec | CA | Turned, Ground & Polished Shafting | M14-10 | M14-10. shaft nut din 1804 din 1804 | stock |
| ||
SIS | AZ | Turned, Ground & Polished Shafting | 1/8 | e-ring 1/8 shaft | 100 |
| ||
SIS | AZ | Turned, Ground & Polished Shafting | Steel | Phosphate | 13/64 | 13/64 od push nut blk-phos steel for 1/16 shaft diam | 3000 |
|
TSF | TX | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | .1872 x 24 | precision ground shafting 303 ss .1872 x 24 +0.0/-.0002 | 2 |
|
ACF | CA | Turned, Ground & Polished Shafting | one piece acme threaded shaft collar | 25 |
| |||
ACF | CA | Turned, Ground & Polished Shafting | 3/16 | 3/16 external shaft retainer | 191 |
| ||
ACF | CA | Turned, Ground & Polished Shafting | Steel | Phosphate | 3 | 3 external shaft retaining ring phosphate | 70 |
|
ACF | CA | Turned, Ground & Polished Shafting | Steel | Plain | 1/4 | 1/4 external shaft retainer plain | 628 |
|
ACF | CA | Turned, Ground & Polished Shafting | 3/16 | 3/16 external shaft retainer | 1954 |
| ||
ACF | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M5 x 94 | M5x94 s/s 303 precsion shaft ( print ) | 120 |
|
ACF | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 0.250 x .375 x .016 | 0.250x.375x.016 s/s precision shaft spacer | 1625 |
|
ACF | CA | Turned, Ground & Polished Shafting | Aluminum | Plain | 7/8 x 2 | 7/8 aluminum 2 piece shaft collar 1-5/8x1/2x1/4-28 | 500 |
|
ACF | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 0.235 x 10.50 | 0.235x10.50 s/s 304 wiper shaft ( print ) | 250 |
|
ACF | CA | Turned, Ground & Polished Shafting | Steel | Phosphate | 43/64 | 43/64 external shaft retaining ring phosphate | 300 |
|
ACF | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/8 x 1 | 5/8 s/s 1 piece shaft collar | 54 |
|
ACF | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2 | inner race shaft spacer s/s 1/2 | 50 |
|
ACF | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | inner race shaft 1/4 spacer s/s | 25 |
| |
ACF | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | inner race shaft 1/4 spacer s/s | 3028 |
| |
ACF | CA | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | inner race shaft 3/16 spacer s/s | 4850 |
| |
Marine Fasteners | FL | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | e-clip for 3/16 shaft 18-8 304 .145 free diameter .335 ring | 154000 |
| |
General F | MI | Turned, Ground & Polished Shafting | Steel | Plain | .375 x 4.050 | adjustment guide | 4,019 |
|
General F | MI | Turned, Ground & Polished Shafting | Steel | Plain | M46.68 x 118.5 | M46.68 x 118.5 rod-push inter axle | 220 |
|
Trifast | TX | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | de shaft ring s437m mech zinc | 29950 |
| |
IRF | NJ | Turned, Ground & Polished Shafting | trigger shaft | 23 |
| |||
IRF | NJ | Turned, Ground & Polished Shafting | trigger shaft | 23 |
| |||
IRF | NJ | Turned, Ground & Polished Shafting | centering shaft | 20 |
| |||
IRF | NJ | Turned, Ground & Polished Shafting | centering shaft | 20 |
| |||
IRF | NJ | Turned, Ground & Polished Shafting | drive shaft assembly | 8 |
| |||
NAPPCO | TX | Turned, Ground & Polished Shafting | 3/4 x 17 | tube shaft 3/4 x 17 | 400 |
| ||
FastWare | Sask | Turned, Ground & Polished Shafting | gear box shaft | 8 |
| |||
BoltCraft | NE | Turned, Ground & Polished Shafting | 13.25 long 1-1/4 1045 cr shaft | 150 |
| |||
BoltCraft | NE | Turned, Ground & Polished Shafting | 10.375 long 1-1/4 1045 cr shaft with hole drilled | 150 |
| |||
BoltCraft | NE | Turned, Ground & Polished Shafting | 11.75 long 1-1/4 1045 cr shaft | 125 |
| |||
BoltCraft | NE | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 8 long 1-1/4 1045 cr shaft with hole drilled zinc | 100 |
| |
BoltCraft | NE | Turned, Ground & Polished Shafting | 9.25 long 1-1/4 1045 cr shaft | 50 |
| |||
BoltCraft | NE | Turned, Ground & Polished Shafting | 6.25 long 1-1/4 1045 cr shaft | 50 |
| |||
BoltCraft | NE | Turned, Ground & Polished Shafting | 10.63 long 1-1/2 1045 cr shaft | inquire |
| |||
BoltCraft | NE | Turned, Ground & Polished Shafting | 7.75 long 1-1/4 1045 cr shaft | inquire |
| |||
BoltCraft | NE | Turned, Ground & Polished Shafting | 5.375 long 1-1/4 1045 cr shaft | inquire |
| |||
BoltCraft | NE | Turned, Ground & Polished Shafting | 7.5 long 1-1/2 1045 cr shaft | inquire |
| |||
BoltCraft | NE | Turned, Ground & Polished Shafting | 2.875 long 5/8 1018 cr shaft with hole drilled | 1 |
| |||
BoltCraft | NE | Turned, Ground & Polished Shafting | 8 long 1-1/4 1045 cr shaft | inquire |
| |||
BoltCraft | NE | Turned, Ground & Polished Shafting | 9.13 long 1-1/4 1045 cr shaft | inquire |
| |||
BoltCraft | NE | Turned, Ground & Polished Shafting | 7.5 long 1-1/4 1045 cr shaft | inquire |
| |||
BoltCraft | NE | Turned, Ground & Polished Shafting | 7.06 long 1-1/4 1045 cr shaft | inquire |
| |||
BoltCraft | NE | Turned, Ground & Polished Shafting | 7.63 long 1-1/4 1045 cr shaft | inquire |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.