FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| OneMonroe | NC | Square Nut | Steel | Galvanized | 5/8-11 | 5/8-11 reg sq nut-hot dip galv | 360 |
|
| OneMonroe | NC | Lock Nut with Tooth L/W (K-Lock, Keps, etc.) | Steel | Plain | M5-.8-0.80 | auvecopak free spinning washer nuts m5-.8 | 1 |
|
| OneMonroe | NC | Finished Hex Nut | Steel | Plain | 3/4-16 | 3/4-16 hex finish nut le ft hand thread. | 1 |
|
| OneMonroe | NC | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Plain | #8 | auvecopak spring type-u nuts #8 screw size | 1 |
|
| OneMonroe | MN | Cap Nut (Acorn Nut) | Plastic | Zinc/Clear | 1/2-13 x 1 1/2 | caster swivel threaded stem stm sz 1/2-13unc x 1-1/2 wheel sz 3 x 1-1/4 wheel mat gray thermoplastic rubber bearing delrin w/top lock brake load ht 4-1/8 load cap 210 lbs temp rt-40 to +180 f | 28 |
|
| OneMonroe | NC | Lock Nut, Nylon Insert | Aluminum | Plain | #8-32 | 8-32 nyl insert l/n-alum | 425 |
|
| OneMonroe | NC | Lock Nut, Nylon Insert | Steel | Zinc/Clear | 1 1/8-7 | 1-1/8-7 nylon insert l/n-zp | 1 |
|
| OneMonroe | MN | Self-Clinching Nut | Steel | Zinc/Clear | captive part #-c420-2 self-clinching nut crs zinc thread-1/4-20 | 500 |
| |
| OneMonroe | MN | Self-Clinching Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | captive part #-cfl632-1 flush nut 18-8 ss thread-6-32 | 700 |
| |
| OneMonroe | MN | Weld Nut | Steel | Plain | M10-1.50 | weld nut square unpiloted m10 x 1.5 thread steel | 5000 |
|
| OneMonroe | NC | Finished Hex Nut | Grade 2 | Plain | 7/16-20 | 7/16-20 gr 2 fin hx nut-plain | 129 |
|
| OneMonroe | NC | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 | 3/8-16 fin hex hut-le ft hand thread-ss | 93 |
|
| RePneu To | MI | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade 2H | Galvanized | 3/4-10 | 3/4-10 anco pn-loc a194 2h domestic hdg | 130 |
|
| TownCountry | AR | Hex Jam Nut | Grade 2 | Zinc/Clear | 7/16-20 | 7/16-20 hex jam nut gr.2 zinc | 600 |
|
| OneMonroe | MN | Lock Nut, Center Locking, All Metal (2-Way Reversible) | Grade 8 | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | 5/8-11 | 5/8-11 2-way rev. l/n gr. 8-zinc flake | 489 |
|
| Jackson | MS | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Zinc/Clear | 7/16-14 | 7/16-14 nc jam pattern flex lock nut zinc .316 tall x .625 waf | 28 |
|
| OneMonroe | NC | Lock Nut, Nylon Insert | Class 10.9 | Plain | M12-1.75-1.75 | m12-1.75 nylon insert lock nut cl 10-yz din 985 | 25 |
|
| OneMonroe | NC | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain | 5/8-18 | 5/8-18 flx. lock nut c/p | 34 |
|
| OneMonroe | NC | Cap Nut (Acorn Nut) | Steel | Zinc/Clear | #8-32 | 8-32 acorn cap nut stamped plated | 447 |
|
| Jackson | MS | Lock Nut, Flange, w/o serrations | Grade G | Phosphate | 5/8-11 | 5/8-11 nc grade g flange locknut phos/oil | 404 |
|
| RePneu To | MI | Lock Nut, Nylon Insert | Class 8.8 | Zinc/Clear | M20-2.50 | m20-2.50 class 8 nylon insert thin locknuts metric coarse zinc cr+3 din 985 | 10 |
|
| Jackson | MS | Lock Nut, Flange, w/o serrations | Grade G | Phosphate | 3/4-10 | 3/4-10 nc gr. g flange locknut phos & oil | 95 |
|
| OneMonroe | MN | Lock Nut, Nylon Insert | Class 8.8 | Zinc/Clear | M22-1.50 | m22-1.5 nylon lock nut cl 8-zp | 300 |
|
| OneMonroe | MN | Finished Hex Nut | 316, 317, A4 Stainless | Plain | M5-0.80 | m5 x .8 nut-a4-80 stainless | 500 |
|
| Jackson | MS | Finished Hex Nut | Steel | Zinc/Yellow | 7/16-14 | 7/16 nc left hand nut zinc yellow | 143 |
|
| Jackson | MS | Finished Hex Nut | Steel | Zinc/Clear | 3/4-10 | 3/4 nc left hand nut zinc | 6 |
|
| OneMonroe | NC | Lock Nut, Center Locking, All Metal (2-Way Reversible) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 | center-lock distorted thread locknut 18-8 stainless steel 3/8-16 thread size | 50 |
|
| OneMonroe | NC | Finished Hex Nut | Nylon (Polyamide) | Plain | 1/2-13 | 1/2-13 nylon finished hex nut | 5 |
|
| OneMonroe | NC | Acme Thread Nut | Steel | Plain | 1 1/4-5 | 1-1/4in-5 acme hex nut | 2 |
|
| Jackson | MS | Heavy Hex Nut | Grade B8M | Plain | 7/8-9 nc sa194 b8m heavy hex nut class 2 | 8 |
| |
| Jackson | MS | Heavy Hex Jam Nut | Steel | Zinc/Clear | 7/8 nc heavy jam nut zinc | 300 |
| |
| Jackson | MS | Heavy Hex Nut | Grade B8M | Plain | 1-8 nc sa194 b8m heavy hex nut class 2 | 1 |
| |
| Jackson | MS | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | m12 x 1.75 metric whiz flange nut a2 stainless steel | 28 |
| |
| Jackson | MS | Hex Jam Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/8-14 nf jam nut stainless steel | 154 |
| |
| RePneu To | MI | Hex Jam Nut | Grade 2 | Zinc/Clear | 7/8-14 | 7/8-14 hex nuts jam fine low carbon zinc cr+3 | 250 |
|
| OneMonroe | NC | Finished Hex Nut | Grade 8 | Plain | 3/8-24 | 3/8-24 gr.8 fin hx nut-yz | 1374 |
|
| OneMonroe | NC | Nut Retainer (Cage Type, U-Type, J-Type, etc.) | Steel | Zinc/Clear | 1/4-20 | 1/4-20 steel cage nut .064-.105 panel range zinc plated | 250 |
|
| Jackson | MS | Heavy Hex Nut | Grade B8 | Plain | 1 1/8-7 | 1-1/8-7 nc b-8 hvy nut | 25 |
|
| Jackson | MS | Eye Nut / Lifting Eye Nut | Steel | Zinc/Clear | 5/16-18 | 5/16 nc domesticdrop forged eye nut steel zinc plated | 34 |
|
| OneMonroe | NC | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Plain | 3/8-16 | auvecopak 3/8-16 extruded u nut long | 3 |
|
| OneMonroe | NC | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Plain | #8 | auvecopak spring type-u nuts #8 screw size | 2 |
|
| Jackson | MS | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Phosphate | #10 diameter speed type-u nut .19/32 offset panel range.025/.150 center of hole to edge 19/32unut blk phos for tapping screws | 4470 |
| |
| OneMonroe | NC | Weld Nut | Steel | Plain | 5/16-18 | 5/16-18 weld nut slab base plain | 150 |
|
| OneMonroe | NC | Push-on Hat Retainer, Axle Cap Nut, Top Hat Nut | Steel | Nickel Plated | 3/8 | 3/8in cap type pushnut nickel plated | 500 |
|
| Weaver | WA | Hex Jam Nut | Steel | Plain | 1 1/2-6 left hand jam nut plain | 9 |
| |
| TownCountry | AR | Weld Nut | Steel | Plain | M08-1.25 | m08-1.25 hex weld nut short pilot 3 projections | 180 |
|
| MAINSOURC | NH | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 | 8-32 serrated hex flange nut 18-8 ss | 1580 |
|
| Jackson | MS | Finished Hex Nut | Class 10.9 | Zinc/Yellow | M36-4.00 | m36 x 4.00 metric nut 10.9 zinc yellow | 18 |
|
| OneMonroe | NC | Hex Jam Nut | Steel | Zinc/Clear | M12-1.75-1.75 | 12mm x 1.75 hex jam nut-zp | 59 |
|
| OneMonroe | MN | Square Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 | 10-24 square nut-s.s. | 25 |
|
| OneMonroe | MN | Lock Nut, Nylon Insert | Grade 8 | Plain | 1 1/8-12 | 1-1/8-12 grade 8 nylon lock nut-yz | 80 |
|
| Jackson | MS | Finished Hex Nut | Class 10.9 | Plain | M22-2.00-2.00 | m22 x 2.00 fine pitch metric nut class 10 plain | 77 |
|
| OneMonroe | NC | Finished Hex Nut | Nylon (Polyamide) | Plain | #14 | auvecopak nylon nuts #14 screw size | 2 |
|
| OneMonroe | WA | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10-1.50 | m10-1.5 nylon insert l/n stainless | 16 |
|
| OneMonroe | MA | Finished Hex Nut | Steel | Zinc/Clear | #4-40 | nut southco type steel #4-40 (zc) | 35 |
|
| OneMonroe | MA | Plate Nut (Nutplate, Floating Anchor Nut) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 1/4-20 x 1 | ac-0420-2 nut floating ss 1/4-20 x 1 | 200 |
|
| OneMonroe | MA | Lock Nut, Nylon Insert | Steel | Cadmium/Yellow | #10-32 | 10-32 nyl ins l/n stl cad/cl | 4000 |
|
| RePneu To | MI | Heavy Hex Nut | ASTM A563 Grade DH | Plain | 1-8 | 1-8 a563 gr.dh heavy hex nut plain | 12 |
|
| RePneu To | MI | Heavy Hex Jam Nut | Grade A | Plain | 1-8 | 1-8 heavy hex jam (thin) nuts a563 grade a plain | 126 |
|
| RePneu To | MI | Heavy Hex Jam Nut | Grade A | Zinc/Clear | 1-8 | 1-8 heavy hex jam (thin) nuts a563 grade a zinc cr+3 | 16 |
|
| RePneu To | MI | Heavy Hex Nut | Grade 8 | Zinc/Clear | 2-8 | 2-8 hex nuts a194/sa194 2h heavy 8 pitch zinc cr+3 | 14 |
|
| RePneu To | MI | Lock Nut, Nylon Insert | Grade 2 | Zinc/Clear | #10-24 | #10-24 unc ntm (thin) nylon insert locknuts coarse low carbon zinc cr+3 | 1300 |
|
| Global | CA | Lock Nut, Nylon Insert | Steel | Plain | 7/16-14 | hex nut | 518 |
|
| Global | CA | Finished Hex Nut | Steel | Plain | 3/4-10 | hex nut | 511 |
|
| Global | CA | Finished Hex Nut | Steel | Nickel Plated | d-2724 / holeplugs stimpson D2724STNI | 83 |
| |
| Global | CA | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/8-11 | hex nut 18-8 ss | 26 |
|
| Global | CA | Machine Screw | Steel | nas1068c08m nuts | 50 |
| ||
| Global | CA | Machine Screw Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #0-80 | MS35650-314 | 35 |
|
| Global | CA | Finished Hex Nut | Brass | Nickel Plated | 3/8-16 | hex nut | 436 |
|
| Global | CA | Machine Screw Nut | Steel | Zinc/Clear | M10-1.50 | machine screw nut i | 41 |
|
| Global | CA | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Plain | c15471-632-4 tinnerman C154716324 | 8 |
| |
| Global | CA | Lock Nut with Tooth L/W (K-Lock, Keps, etc.) | Steel | Nickel Plated | M4-0.70 | keps nut plate | 403 |
|
| Global | CA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Cadmium/Yellow | #4-40 | MS21042-04 | 280 |
|
| Global | CA | Lock Nut with Tooth L/W (K-Lock, Keps, etc.) | Steel | Zinc/Clear | #6-32 | kep nut small pattern i | 1,374 |
|
| Global | CA | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Plain | c7951-1032-3b tinnerman C795110323B | 230 |
| |
| Global | CA | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Plain | c71122-832-4 tinnerman C711228324 | 160 |
| |
| Global | CA | Machine Screw Nut | Steel | Zinc/Clear | M2.6-0.50 | machine screw nut i | 192 |
|
| Global | CA | Machine Screw Nut | Steel | Plain | #10-32 | MS35650-304 | 60 |
|
| Global | CA | Machine Screw Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | #6-40 | machine screw nut 18-8 ss passivate | 145 |
|
| Global | CA | Hex Jam Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 | hex jam nut 18-8 ss | 885 |
|
| Global | CA | Hex Jam Nut | Steel | Zinc/Clear | M6-1.00 | hex jam nut | 16 |
|
| Global | CA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain | 21 | fk420 (1/4-20) flexloc, s | 99 |
|
| Endries | WI | Weld Nut | Steel | Plain | M6-4.00 | M6 4 projection square weld nut plain source controlled din 928 | 14600 |
|
| Endries | WI | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-24 | 3/8-24 ne series 18-8 s/s steel nylon insert locknut cetyl alcohol wax | 3400 |
|
| Endries | WI | Finished Hex Nut | Grade 5 | Electrolytic Zinc Basecoat + Topcoats (Climacoat, Climaseal, etc.) | 3/8-16 | 3/8-16 grade 5 hex nut hex chrome free zinc flake silver 1 000 hours to red rust f2833 grade 1 | 100 |
|
| Endries | WI | Self-Clinching Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M4-0.7-1.4 | M4-0.7x1.4 min self-clinching nuts 18-8 304 | 581 |
|
| Endries | WI | Lock Nut, Nylon Insert | Steel | Plain | 3/8-24 | ms21044-n6 3/8-24 nylon insert locknut cadmium & yellow | 550 |
|
| Endries | WI | Lock Nut, Nylon Insert | 316, 317, A4 Stainless | Plain | 3/4-10 | 3/4-10 ne series 316 stainless steel nylon insert locknut wax | 500 |
|
| Endries | WI | Lock Nut, Nylon Insert | Class 10.9 | Zinc/Clear | M16 | M16 class 10 nylon insert locknut trivalent clear zinc source controlled din 985 | 33 |
|
| Endries | WI | Lock Nut with Tooth L/W (K-Lock, Keps, etc.) | Steel | Zinc/Yellow | 5/16-18 x 1/2 | 5/16-18x1/2 width across flats keps nut yellow zinc | 2102 |
|
| Endries | WI | Lock Nut with Tooth L/W (K-Lock, Keps, etc.) | Steel | Zinc/Clear | #10-24 x 3/8 | 10-24x3/8 width across flats keps nut trivalent clear zinc | 7848 |
|
| Endries | WI | Propell Nut (Hurricane Nut) | Steel | Zinc/Black | sp14205fw9-zb 1/4-20 propell nut black zinc | 950 |
| |
| Century | FL | Self-Clinching Nut | Steel | Zinc/Clear | #10-24 | 10-24 self clinch nut zinc kanbridge# 10-2ncl (ss-024-2) | 1000 |
|
| Century | Castle Nut (Hex) | ms9359-17 | 5000 |
| ||||
| Century | FL | Lock Nut, Nylon Insert | Plain | ms17828-7f nut self locking hexagon | 1213 |
| ||
| Century | FL | Weld Nut | Steel | Plain | M12 | m12 hex weld nut steel din 929 | 700 |
|
| Century | FL | Flange Nut, Non-locking | Steel | Zinc/Clear | M8 | m8 non serrated flange nut steel 10 zinc clear | 8000 |
|
| Century | FL | Machine Screw Nut | Plain | ms17986c522 _x000d_ pin quick release | 63 |
| ||
| Century | FL | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | M6 | itw clip 12915 m6 magni 565 type-u nut itw 12915 m6 magni 565 silver | 2500 |
| |
| Lufasco, | GA | Square Nut | Brass | Plain | 5/8-8 | 5/8-8 square acme nut 1 af, 5/8 thick brass | 275 |
|
| OneMonroe | MN | Finished Hex Nut | Plain | 5/16-24 | 5/16-24 nuts | 287 |
| |
| MetricThrd | CA | Castle Nut (Hex) | Steel | Plain | M18-1.50 | m18-1.50 din 979-14h pln thin castle nuts | 100 |
|
| MetricThrd | CA | Castle Nut (Hex) | Steel | Plain | M30 | m30 din 979-4 pln thin castle nuts | 15 |
|
| MetricThrd | CA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Class 8.8 | Zinc/Clear | M5 | m 5 din 980v-8 st/zn stover locknuts | 3,200 |
|
| MetricThrd | CA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Class 8.8 | Zinc/Clear | M6 | m 6 din 980v-8 st/zn stover locknuts | 89 |
|
| MetricThrd | CA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Class 8.8 | Zinc/Clear | M8-1.00 | m 8-1.0 din 980v-8 st/zn stover locknuts fine | 155 |
|
| MetricThrd | CA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Class 8.8 | Zinc/Clear | M10 | m10 din 980v-8 st/zn stover locknuts | stock |
|
| MetricThrd | CA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Class 8.8 | Zinc/Clear | M10-1.00 | m10-1.0 din 980v-8 st/zn stover locknuts fine | 99 |
|
| MetricThrd | CA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Class 8.8 | Zinc/Clear | M14-1.50 | m14-1.50 din 980v-8 st/zn stover locknuts fine | 105 |
|
| MetricThrd | CA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Class 8.8 | Zinc/Clear | M16-1.50 | m16-1.50 din 980v-8 st/zn stover locknuts fine | 150 |
|
| MetricThrd | CA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Class 8.8 | Zinc/Clear | M20-1.50 | m20-1.50 din 980v-8 st/zn stover locknuts fine | 46 |
|
| MetricThrd | CA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Class 8.8 | Zinc/Clear | M22 | m22 din 980v-8 st/zn stover locknuts | 194 |
|
| MetricThrd | CA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Class 8.8 | Zinc/Clear | M36 | m36 din 980v-8 st/zn stover locknuts | 21 |
|
| MetricThrd | CA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Class 8.8 | Zinc/Clear | M4 | m 4 din 980v-8 st/zn stover locknuts | 1,800 |
|
| MetricThrd | CA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Class 10.9 | Zinc/Clear | M5 | m 5 din 980v-10 st/zn cr3 stover locknuts | 2,272,450 |
|
| MetricThrd | CA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Class 10.9 | Zinc/Clear | M6 | m 6 din 980v-10 st/zn stover locknuts | 143,710 |
|
| MetricThrd | CA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Class 10.9 | Zinc/Clear | M8 | m 8 din 980v-10 st/zn stover locknuts | 97,627 |
|
| MetricThrd | CA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Class 10.9 | Zinc/Clear | M8-1.00 | m 8-1.0 din 980v-10 st/zn stover locknuts fine | 41,719 |
|
| MetricThrd | CA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Class 10.9 | Zinc/Clear | M10 | m10 din 980v-10 st/zn stover locknuts | 34,826 |
|
| MetricThrd | CA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Class 10.9 | Zinc/Clear | M10-1.00 | m10-1.0 din 980v-10 st/zn stover locknuts fine | 28,850 |
|
| MetricThrd | CA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Class 10.9 | Zinc/Clear | M10-1.25 | m10-1.25 din 980v-10 st/zn stover locknuts fine | 69,113 |
|
| OneMonroe | NC | Heavy Hex Nut | Steel | Plain | 1/8 | auvecopak thread cutting nuts 1/8 stud size | 2 |
|
| GUIDON | NJ | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | Steel | Zinc/Clear | #8-32 | CASE HARDENED | 10,800 |
|
| GUIDON | TX | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | Steel | Zinc/Clear | #10-32 | 3,500 |
| |
| GUIDON | NJ | Slotted Hex Nut | Steel | Zinc/Clear | 3/4-10 | FINISHED PATTERN | 100 |
|
| GUIDON | NJ | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade C | Zinc/Clear | 1/4-20 | STOVER TYPE | 2,700 |
|
| GUIDON | NJ | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade A | Zinc/Clear | 3/8-16 | STOVER TYPE | 1,380 |
|
| GUIDON | NJ | Wing Nut | Steel | Zinc/Clear | #10-32 | STAMPED | 1,000 |
|
| GUIDON | NJ | Wing Nut | Steel | Zinc/Clear | 1/4-20 | STAMPED | 300 |
|
| GUIDON | NJ | Lock Nut, Top Locking, All Metal (Automation style, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 | TOP-LOCK | 100 |
|
| GUIDON | NJ | Lock Nut, Top Locking, All Metal (Automation style, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 | TOP-LOCK | 100 |
|
| GUIDON | TX | T-Nut (Tee Nut) | Steel | Zinc/Clear | 1/4-20 | 3 PRONG 5/16 BARREL | 12,000 |
|
| GUIDON | NJ | T-Nut (Tee Nut) | Steel | Zinc/Clear | 5/16 | 4 PRONG 3/8 BARREL | 2,500 |
|
| GUIDON | NJ | Wing Nut | Steel | Zinc/Clear | 1/4-20 | toggle wing nut | 1,060 |
|
| GUIDON | NJ | T-Nut (Tee Nut) | Steel | Zinc/Clear | 5/16-18 | toggle wing nut | 200 |
|
| GUIDON | NJ | T-Nut (Tee Nut) | Steel | Zinc/Clear | 1/2-13 | toggle wing nut | 100 |
|
| MESAFAST | CA | Hex Jam Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 | hex jam nut 18-8 s/s 18-8 s/s | 301.0 |
|
| MESAFAST | CA | Lock Nut, Nylon Insert | Class 8.8 | Zinc/Clear | M5-0.80 | M5 -.8 nylon insert locknut class 8 heavy pattern heavy pattern din 982 | 14,600.0 |
|
| MESAFAST | CA | Finished Hex Nut | Steel | Zinc/Clear | 3/8-16 | 3/8-16 hex nut zc 50/poly bag 50/poly bag | 73,170.0 |
|
| MESAFAST | CA | Finished Hex Nut | Steel | Black Oxide | 3/4-10 | hex nut black oxide | 26.0 |
|
| MESAFAST | CA | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | Steel | Zinc/Clear | #10-24 | serrated flange nut zinc | 2,400.0 |
|
| Howe Fast | OH | Finished Hex Nut | Grade 2 | Zinc/Clear | 3/4-10 | finished hex nut grade 2 zinc | 25,000 |
|
| Howe Fast | OH | Wing Nut | Grade 2 | Zinc/Clear | 1/4-20 | stamped wing nut zinc | 17,000 |
|
| MESAFAST | CA | Coupling Nut | Steel | Galvanized | 5/8-11x(2-1/8) hex rod coupling nut long hot dip hot dip | 10.0 |
| |
| Global | CA | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Plain | c-1663-031-3b tinnerman C1663313B | 246 |
| |
| Global | CA | Panel Nut | Brass | Nickel Plated | 5/8-24 | hex panel nut plate | 30 |
|
| Global | CA | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 | nylon insert locknut 18-8 ss | 80 |
|
| Global | CA | Weld Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 51618 | hs3z- 5/16-18 ss hex weldnut, ohio HS3Z | 406 |
|
| MESAFAST | CA | Wing Nut | Steel | Zinc/Clear | 1/4-20 x 1 1/4 | type-a cold forged wing screw zinc | 49.0 |
|
| ISSCO | MO | T-Nut (Tee Nut) | Steel | Zinc/Clear | 1/4-20 x 7/16 | 7/16 barrel slab base | 25000 |
|
| BAYFASTCO | FL | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Plain | c1989 | Tinnerman (A Raymond Tinnerman) tinnerman palnut C1989-012-04 tinnerman | 31000 |
|
| BAYFASTCO | FL | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Zinc/Clear | c22503 | Tinnerman (A Raymond Tinnerman) tinnerman palnut c22503-014-3b tinnerman | 6000 |
|
| BAYFASTCO | FL | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Plain | c1783 | tinnerman palnut c1783-014-4 tinnerman | 950 |
|
| BAYFASTCO | FL | Push-on Nut (Pushnut, Starlock Washer, etc.) | Steel | Zinc/Clear | 1/2 | tinnerman palnut c70674-500-600 tinnerman 1/2 push on re | 24000 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
