FCH Member Advertisement
FCH News
Flat Washer (ISO 7094)
Flat Washers, or just Plain Washers, are a flat annulus or ring, often of metal, used to spread the load from the head of a screwed fastening to the base material. Flat washers are used to increase the bearing surface of a nut or fastener's head thus spreading the clamping force over a larger area.
0 Flat Washer (iso 7094), showing 200, (click on any line for more information)
| Search Results Sponsored by Endries International, your source for Flat Washers . For more results, visit www.endries.com | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Endries | WI | Flat Washer | Nylon (Polyamide) | Plain / Furnace Black | M6.62 x 12 x 1.80 | 17m06din34815 6.62x12x 1.80mm nylon flat washer natural | 7000 |
|
| Endries | WI | Flat Washer | Steel | Zinc/Clear | .260/.270 x .493/.530 x .084/.090 | .260/.270x.493/.530x .084/.090 flat washer tri clr zinc 120 wh/144 red rust | 3900 |
|
| Endries | WI | Flat Washer | Nylon (Polyamide) | Plain / Furnace Black | .531 x .74 x .187 | 17w07505 .531x.74x.187 nylon flat washer | 119 |
|
| Endries | WI | Flat Washer | Galvanized | .556/.566 x 1.495/1.505 x .235/.265 | .556/.566x1.495/1.505x .235/.265 flat washer hot dip galvanized | 400 |
| |
| Buy Flat Washers from one of our FCH Network Members | ||||||||
| Jackson | MS | Flat Washer | Steel | Zinc/Clear | .378 x 1.25 x .179 | .378 idx1.25 odx.179 thick special mfg by wrought dom.. | 14487 |
|
| Brikksen | Flat Washer | Brass | Plain / Furnace Black | M4 | m4 flat washer brass | din 125a | 102500 |
| |
| Brikksen | Flat Washer | Brass | Plain / Furnace Black | M5 | m5 flat washer brass | din 125a | 42500 |
| |
| Brikksen | Flat Washer | Brass | Plain / Furnace Black | M6 | m6 flat washer brass | din 125a | 51000 |
| |
| Brikksen | Flat Washer | Brass | Plain / Furnace Black | M8 | m8 flat washer brass | din 125a | 15000 |
| |
| Brikksen | Flat Washer | Steel | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | M10 | m10 flat washer steel magni magni | 140hv m10 steel zinc w/ /magni 575 coating | 140hv m10 steel zinc w/ /magni 575 coating | 140hv m10 steel zinc w/ /magni 575 coating din 125a | 1944 |
| |
| MAINSOURC | NH | Flat Washer | Steel | Zinc/Yellow | M2.5 | flt wshr stl zy din 125a | 750 |
|
| GOEBEL | TX | Flat Washer | Steel | Plain / Furnace Black | flat washer for go-300 | 14 |
| |
| Century | FL | Flat Washer | Passivated | #10 | 10060134-1precision washer per dwg #10060134 rev b. nadcap passivate per note 6a.raytheon 4973956 | 22 |
| |
| Century | FL | Flat Washer | Steel | Zinc/Yellow | .109 x .250 x .020 | .109 x .250 x .020 flatwasher steel zinc yellow | 150 |
|
| Century | FL | Flat Washer | Plain / Furnace Black | #10 | ms21299c3 | 98 |
| |
| Century | FL | Flat Washer | Plain / Furnace Black | ms15795-418washer flat | 17 |
| ||
| Century | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/4 x 1 3/4 x .149 | ms15795-823 flatwasher stainless stell | 17 |
|
| Century | FL | Flat Washer | Steel | Plain / Furnace Black | #0 | ms51496p61 flat washer | 30 |
|
| Century | FL | Flat Washer | Plain / Furnace Black | .140 x .438 x .032 | nas1149dn532k | 16 |
| |
| Century | FL | Flat Washer | Steel | Plain / Furnace Black | 0.219 x .438 x .049 | ms15795-408 washer flat | 308 |
|
| Century | FL | Flat Washer | Plain / Furnace Black | M1 x 5 | na0179bl050 flat washer m5 x 1 cres | 14 |
| |
| Century | FL | Flat Washer | Plain / Furnace Black | boeing bacw10bx3lk washer | 19 |
| ||
| Century | FL | Flat Washer | Plain / Furnace Black | .250 | nas1149g0463p | 9 |
| |
| Century | FL | Flat Washer | Steel | Plain / Furnace Black | nas1149a0663k washer | 8 |
| |
| Century | FL | Flat Washer | Nylon (Polyamide) | Plain / Furnace Black | seastrom 5615-57-10 nylatron flat washer | 301 |
| |
| Century | FL | Flat Washer | Plain / Furnace Black | eaton 5695 coupling washer per print | 169 |
| ||
| Century | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #6 | cphw82105 #6 flat washer 18-8 | 4000 |
|
| Century | FL | Flat Washer | Steel | Zinc/Yellow | std ln 9000-12zpd x washer stl zn yel | 750 |
| |
| Century | FL | Flat Washer | Steel | Zinc/Clear | .250 | .250 +.006/-.002 x .875 +/-.010 x.115-.135 flat washer steel zinc clear | 750 |
|
| Century | FL | Flat Washer | Plain / Furnace Black | 1.265 x 2.000 x .090 | nas1149c2090r | 369 |
| |
| Century | FL | Flat Washer | Plain / Furnace Black | 0.281 x .531 x .032 | ms15795-752 | 364 |
| |
| Century | FL | Flat Washer | Superalloy (Inconel, Hastelloy, Alloy 20) | Cadmium/Yellow | 0.203 x .438 x .063 | nas1149e0363p flat washer #10 q3a | 320 |
|
| OneMonroe | NC | Flat Washer | Steel | Zinc/Clear | .156 x .562 x .040 | #6 f/w t-b wide stl zinc .156 x .562 x .040 | 961 |
|
| OneMonroe | NC | Flat Washer | Brass | Nickel Plated | .159 x .375 x .032 | #6 flat wash brs nickel pl .159 x .375 x .032 | 5995 |
|
| OneMonroe | NC | Flat Washer | Nylon (Polyamide) | Plain / Furnace Black | .162 x .312 x .062 | #6 f/w nyl blk .162 x .312 x .062 17w03130b | 500 |
|
| OneMonroe | NC | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | 1/4 | 1/4 f/w 18-8ss blkox .265 x .500 x .063 | 600 |
|
| OneMonroe | NC | Flat Washer | Fiber | Plain / Furnace Black | microfiber super thick wash mitt | 1 |
| |
| OneMonroe | MN | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | .312-.734 | .312-.734 ms15795 military flat washer 300 series stainless steel dfar 2500/carton | 65 |
|
| OneMonroe | MN | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | .562-1.375 | .562-1.375 ms15795 military flat washer 300 series stainless steel dfar 500/carton | 130 |
|
| Jackson | MS | Flat Washer | Class 10.9 | Plain / Furnace Black | M12 | m12 metric flat washer class 10 plain finish hv200-125-a / 200 hv (for 10.9 bolt) | 10368 |
|
| Jackson | MS | Flat Washer | Class 10.9 | Plain / Furnace Black | M14 | m14 metric flat washer 200 hv (for 10.9 bolt) plain | 2821 |
|
| Jackson | MS | Flat Washer | Class 10.9 | Plain / Furnace Black | M30 | m30 metric flat washer 200 hv (for 10.9 bolt) plain | 1092 |
|
| Jackson | MS | Flat Washer | Class 10.9 | Zinc/Yellow | M8 | m8 metric flat washer 200 hv (for 10.9 bolt) yellow zinc | 11349 |
|
| Jackson | MS | Flat Washer | Class 8.8 | Plain / Furnace Black | M8 | m8 metric flat washer 8.8 plain din 125a | 9000 |
|
| Jackson | MS | Flat Washer | Class 8.8 | Zinc/Clear | M12 | m12 metric flat washer 8.8 zinc din 125a | 5467 |
|
| Jackson | MS | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M4 | 4 mm metric flat washer a-2 stainless | 3801 |
|
| Jackson | MS | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | .468 x .921 x .051 .080 | .468 id x .921 od x .051-.080 thick (ms816) washer stainless steel #816 | 17 |
|
| Jackson | MS | Flat Washer | Nylon (Polyamide) | Plain / Furnace Black | 5/16 x 3/4 x 3/8 | 5/16 id 3/4 od 3/8 thick natural nylon washer | 1039 |
|
| Jackson | MS | Flat Washer | 316, 317, A4 Stainless | Plain / Furnace Black | 1 1/2 flat washer 316 stainless 1 5/8 id x 3 1/4 od x 3/16 thick | 3 |
| |
| OneMonroe | MI | Flat Washer | Steel | Plain / Furnace Black | pem alternative captive 1 1/4 special dim. flat 1.25x1.60x150 delri | 1004 |
| |
| Jackson | MS | Flat Washer | Steel | Galvanized | 5/8 | og | 37 |
|
| Jackson | MS | Flat Washer | Steel | Zinc/Clear | fail | 13 mm id x 30 mm od x 3 mm thick special washer zinc plated (m12 or equal) bn 737 | 50 |
|
| OneMonroe | MN | Flat Washer | Plain / Furnace Black | plate ut10116zn asy | 8 |
| ||
| OneMonroe | NC | Flat Washer | Steel | Plain / Furnace Black | seastrom 5731-24 oval id wsh stl | 904 |
| |
| TownCountry | AR | Flat Washer | Class 10.9 | Zinc/Yellow | M06 | m06 flat washer 10.9 yellow zinc | 50 |
|
| OneMonroe | NC | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | .093 x .156 x .020 | #2 f/w 18-8 ss .093 x .156 x .020 | 500 |
|
| RePneu To | MI | Flat Washer | Plain / Furnace Black | M2 x 8 x 1 | un fw za 8 x 2 x 1 40 | 22 |
| |
| SRF | AL | Flat Washer | Nylon (Polyamide) | Plain / Furnace Black | .203 x .562 x .063 | .203 id .562 od .063 thk | - |
|
| SRF | AL | Flat Washer | Steel | Plain / Furnace Black | .540 x .750 x .060 | .540 id x .750 od x .060 | - |
|
| SRF | AL | Flat Washer | Steel | Zinc/Clear | #4 | 8,687 |
| |
| SRF | AL | Flat Washer | Nylon (Polyamide) | Plain / Furnace Black | 1.015 x 1.5 x .08 | flat | - |
|
| SRF | AL | Flat Washer | Nylon (Polyamide) | Plain / Furnace Black | .875 x 1.750 x .125 | .875 id 1.750 od .125 thk | - |
|
| SRF | AL | Flat Washer | Steel | Painted | .255 x .43 | oil impregnated bronze .255id .43 | - |
|
| SRF | AL | Flat Washer | Steel | Plain / Furnace Black | M42 | flat | - |
|
| Cal Fastenrs | CA | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | .188 x .437 x .050 | .188 x .437 x .050 f/w stainless steel black oxide ms15795-841 | ms15795-841 | ms15795-841 | 2,443 |
|
| Cal Fastenrs | CA | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | 1/2 | 1/2 commercial flat washer stainless steel/passivated | 150 |
|
| ACCURATE | IL | Flat Washer | Steel | Plain / Furnace Black | 5/8 x 2 1/2 x 1/4 | flat plate | 2 |
|
| ACCURATE | IL | Flat Washer | Steel | Plain / Furnace Black | 3/4 x 3 x 1/4 | flat plate | 34 |
|
| MAINSOURC | NH | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | .156 x .438 x .040 | .156x.438x.040 ss f/w | 848 |
|
| Jay-Cee | MI | Flat Washer | Steel | Plain / Furnace Black | inquire |
| ||
| RCFast | AZ | Flat Washer | 316, 317, A4 Stainless | Plain / Furnace Black | M3 | flat stainless a4 | 2000 |
|
| RCFast | AZ | Flat Washer | Steel | Zinc/Black | M5 | flat stl black rohs | 55200 |
|
| RCFast | AZ | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | #2 | flat nylon black (.094x.18-8 304 s/sx.02) rohs | 12000 |
|
| RCFast | AZ | Flat Washer | Rubber, Buna-N, Neoprene etc. | Plain / Furnace Black | 8-10 x 5/8 | od neoprene flat stl anized | 3000 |
|
| YANKEE | NH | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | 1/4 x 5/8 x .045 .050 | 1/4 x 5/8 od x .045-.050tk flat washer 18-8 stainless steel w/black oxide finish | 518 |
|
| YANKEE | NH | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | #6 .140 x .280 x .035 | #6 flatwasher.140id .280od .035tk s/s blk oxide | 5700 |
|
| METRO IND | OH | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/8 | 5/8 tool slotted flat s/s | 9 |
|
| C & S Fas | FL | Flat Washer | Plain / Furnace Black | M36 | 36mm flat washer 140 hv plain din 125a | 98 |
| |
| C & S Fas | FL | Flat Washer | Plain / Furnace Black | M10 | 10mm flat washer 200 hv plain din 125a | 4994 |
| |
| C & S Fas | FL | Flat Washer | 316, 317, A4 Stainless | Plain / Furnace Black | M10 | 10mm flat washer a4 (316ss) din 125a | 2300 |
|
| C & S Fas | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M10 | 10mm flat washer a2 (18-8ss) din 125a | 1289 |
|
| C & S Fas | FL | Flat Washer | 316, 317, A4 Stainless | Plain / Furnace Black | M14 | 14mm flat washer a4 (316ss) din 125a | 1092 |
|
| C & S Fas | FL | Flat Washer | Steel | Zinc/Clear | M14 | 14mm flat washer 200 hv zinc din 125a | 750 |
|
| C & S Fas | FL | Flat Washer | 316, 317, A4 Stainless | Plain / Furnace Black | M18 | 18mm flat washer a4 (316ss) din 125a | 500 |
|
| C & S Fas | FL | Flat Washer | Steel | Zinc/Yellow | M18 | 18mm flat washer 200 hv yellow zinc din 125a | 1156 |
|
| C & S Fas | FL | Flat Washer | Plain / Furnace Black | M22 | 22mm flat washer 300 hv plain din 125a | 437 |
| |
| C & S Fas | FL | Flat Washer | Plain / Furnace Black | M24 | 24mm flat washer 200 hv plain din 125a | 360 |
| |
| C & S Fas | FL | Flat Washer | Steel | Zinc/Clear | M24 | 24mm flat washer 200 hv zinc din 125a | 450 |
|
| C & S Fas | FL | Flat Washer | Plain / Furnace Black | M30 | 30mm flat washer 300 hv plain din 125a | 116 |
| |
| C & S Fas | FL | Flat Washer | Aluminum | Plain / Furnace Black | 3/8 x 1 1/2 | 3/8 x 1-1/2 neo bonded aluminum flat washer | 35900 |
|
| C & S Fas | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M4 | 4mm flat washer a2 (18-8ss) din 125a | 1600 |
|
| C & S Fas | FL | Flat Washer | 316, 317, A4 Stainless | Plain / Furnace Black | #4 | #4 flat washer 316ss | 800 |
|
| C & S Fas | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M5 | 5mm flat washer a2 (18-8ss) din 125a | 3196 |
|
| C & S Fas | FL | Flat Washer | Steel | Zinc/Clear | M6 | 6mm flat washer 200 hv zinc din 125a | 14335 |
|
| C & S Fas | FL | Flat Washer | Steel | Zinc/Clear | M7 | 7mm flat washer 200 hv zinc din 125a | 11200 |
|
| C & S Fas | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 818 commerical flat washer 18-8ss | 400 |
| |
| MAINSOURC | NH | Flat Washer | Nylon (Polyamide) | Plain / Furnace Black | .257 x .500 x .032 | 1/4 flt wshr (.257x.500x.032) nylon | 7490 |
|
| MAINSOURC | NH | Flat Washer | Plastic | Plain / Furnace Black | .128 x .250 x .030 | #4 flt wshr (.128x.250x.030) delrin | 25 |
|
| MAINSOURC | NH | Flat Washer | Nylon (Polyamide) | Plain / Furnace Black | .112 x .206 x .053 | #4 flt wshr (.112x.206x.053) nylon | 640 |
|
| MAINSOURC | NH | Flat Washer | Nylon (Polyamide) | Plain / Furnace Black | .125 x .250 x .016 | #4 flt wshr (.125x.250x.016) nylon | 265 |
|
| MAINSOURC | NH | Flat Washer | Nylon (Polyamide) | Plain / Furnace Black | .125 x .250 x .062 | #4 flt wshr (.125x.250x.062) nylon | 3386 |
|
| MAINSOURC | NH | Flat Washer | Nylon (Polyamide) | Plain / Furnace Black | .706 x .871 x .111 | 11/16 flt wshr (.706x.871x.111) nylon | 1000 |
|
| MAINSOURC | NH | Flat Washer | Nylon (Polyamide) | Plain / Furnace Black | .812 x 1.059 x .125 | 3/4 flt wshr (.812x1.059x.125) nylon | 500 |
|
| Jackson | MS | Flat Washer | Nylon (Polyamide) | Plain / Furnace Black | 5/16 x 1 1/4 | 5/16 od 1-1/4 bolt id 1/16 thick special | 15 |
|
| Future Fastener | TX | Flat Washer | Galvanized | M8 | m8 flat washer hot dip galvanized din 125 | 634 |
| |
| Future Fastener | TX | Flat Washer | Galvanized | M12 | m12 flat washer hot dip galvanized din 125 | 1825 |
| |
| Future Fastener | TX | Flat Washer | Steel | Galvanized | M14 | m14 flat washer hot dip galvanized | 45 |
|
| Future Fastener | TX | Flat Washer | Galvanized | M16 | m16 flat washer hot dip galvanized din 125 | 51 |
| |
| Future Fastener | TX | Flat Washer | Steel | Galvanized | M18 | m18 flat washer hot dip galvanized | 34 |
|
| Future Fastener | TX | Flat Washer | Steel | Galvanized | M20 | m20 flat washer hot dip galvanized | 171 |
|
| Future Fastener | TX | Flat Washer | Copper | Plain / Furnace Black | M17 x 23 | m17 x 23mm od flat washer copper | 90 |
|
| Future Fastener | TX | Flat Washer | Steel | Galvanized | M30 | m30 flat washer hot dip galvanized | 20 |
|
| MAINSOURC | NH | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | #10 | ms15795-848 ( .203x.562x.063 ss) 304ss MS15795848 | 944 |
|
| MAINSOURC | NH | Flat Washer | Nylon (Polyamide) | Plain / Furnace Black | .438 x .625 x .031 | 3/8 flt wshr (.438x.625x.031) nylon | 4000 |
|
| MAINSOURC | NH | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | 0.765 x 1.312 x .032 | nas1149c1232r (an960c1216l) 304ss | 129 |
|
| Jackson | MS | Flat Washer | Steel | Plain / Furnace Black | 5/8 x 8 | head drive spike area 2m | 224 |
|
| Jackson | MS | Flat Washer | Steel | Zinc/Clear | 5/8 x 10 | head drive spike area 2m | 50 |
|
| Jackson | MS | Flat Washer | Steel | Plain / Furnace Black | 5/8 x 11 | head drive spike area 2m | 449 |
|
| FTS | OH | Flat Washer | Steel | Phosphate | M10 | f/w stl blk phos din 433 | 314 |
|
| FTS | OH | Flat Washer | Steel | Plain / Furnace Black | M10 f/w bn 80062 stl | 1500 |
| |
| FTS | OH | Flat Washer | Steel | Plain / Furnace Black | M10 | f/w stl din 125a | 2062 |
|
| FTS | OH | Flat Washer | Steel | Plain / Furnace Black | M10 | f/w tp 200 stl din 125a | 587 |
|
| FTS | OH | Flat Washer | Steel | Zinc/Clear | M10 | f/w stl zn din 125a | 3000 |
|
| FTS | OH | Flat Washer | Steel | Zinc/Clear | M10 | f/w stl zn din 126 | 400 |
|
| FTS | OH | Flat Washer | Steel | Zinc/Clear | M10 | f/w stl zn din 1440 | 460 |
|
| FTS | OH | Flat Washer | Steel | Zinc/Clear | M10 | f/w stl zn din 433 | 29 |
|
| FTS | OH | Flat Washer | Steel | Black Oxide | M10 x 10.5 | M10 fw 10.5idx23odx4.5/5.4thk hard stl | 3950 |
|
| FTS | OH | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M12 | f/w a2 ss din 125a | 52 |
|
| FTS | OH | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M12 | f/w a2 ss din 125b | 2000 |
|
| FTS | OH | Flat Washer | Steel | Phosphate | M12 | f/w stl phos din 125a | 2885 |
|
| FTS | OH | Flat Washer | Steel | Phosphate | M12 | f/w stl phos din 433 | 1172 |
|
| FTS | OH | Flat Washer | Steel | Plain / Furnace Black | M12 | f/w stl din 125a | 759 |
|
| FTS | OH | Flat Washer | Steel | Plain / Furnace Black | M12 | f/w tp 200 stl din 125a | 144 |
|
| FTS | OH | Flat Washer | Steel | Plain / Furnace Black | M12 | f/w stl din 126 | 1900 |
|
| FTS | OH | Flat Washer | Steel | Plain / Furnace Black | M12 | f/w stl din 433 | 99 |
|
| FTS | OH | Flat Washer | Steel | Plain / Furnace Black | M12 | f/w stl din 7989a | 100 |
|
| FTS | OH | Flat Washer | Steel | Zinc/Clear | M12 | f/w stl zn/ni/clr din 126 | 6613 |
|
| FTS | OH | Flat Washer | Steel | Zinc/Clear | M12 | f/w stl zn bn 737 | 45 |
|
| B & K FAST | PA | Flat Washer | Nylon (Polyamide) | Plain / Furnace Black | 7/16 | 7/16 nylon flat s b18.22.1 | 160 |
|
| Jackson | MS | Flat Washer | Steel | Plain / Furnace Black | 2 | 2 each 1/2 eye nut 3.5 stud nut f/w | 49 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
