FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Century | FL | Flat Washer | Cadmium/Yellow | 0.328 x .562 x .063 | nas1149e0563p | 10 |
| |
| Century | FL | Springs (Compression) | 69-2648 | 69-2648 rev a compression spring drs technologies 69-2648 | 110 |
| ||
| Century | FL | Fully Threaded Stud (All Thread) | Steel | Cadmium/Yellow | #10-32 x 3/8 | captive ch1032-6cc stud 10-32 x 3/8 steel cadium yellow | 39900 |
|
| Century | FL | Tooth Lock Washer (Int. & Ext.) | Steel | Plain / Furnace Black | 3/8 | 3/8 internal l/w steel | 10000 |
|
| Centennia | CO | Anchor & Screw Kits (Anchor Packs) | Plain / Furnace Black | #10 x 1 | #10 x 1 conical anchor kit | 31 |
| |
| Kanebridge | IL | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Zinc/Clear | #6-20 x 1 1/2 | #6-20x1 1/2 phillips pan full thread sds zc nc bk 1000hr self-drilling screws | 80000 |
|
| Kanebridge | IL | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Zinc/Black | #12-24 x 1/2 | #12-24x1/2 phillips pan full thread type-f blk znc blk zinc & bake thread cutting screws | 60000 |
| |
| NAPPCO | TX | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #12-24 x 1/2 | flat slottedu-cut m/s s/s 18-8 12-24x1/2 | 448 |
|
| NAPPCO | TX | Gaskets | Rubber, Buna-N, Neoprene etc. | Plain / Furnace Black | .250 | epdm locking window gasket for .250 | 300 |
|
| Optimas | IL | Finished Hex Nut | Class 10.9 | Plain / Furnace Black | M8-1.25 | m8x1.25 asme b18.2.4.1m hex nut class 10 (p) | 4766.7498110532761 |
|
| Optimas | IL | T-Head Bolt (T-Slot Bolt, Hammer Head Bolt) | Class 8.8 | Zinc/Clear | M8-1.25 x 55 | m8x1.25 x 55mm t-bolt class 8.8 zinc trivalent.0003 per drawing rohs (p) | 5384 |
|
| Optimas | IL | O-Rings & Quad Ring Seals (X-Rings) | Steel | Zinc/Clear | 7/8-14 x 1/2 | 7/8-14 x 1/2 hex socket pipe plug steel zinc triv o-ring per dwg rohs (p) | 185 |
|
| Optimas | IL | Flange Screw w/o serr. (Frame Bolt) | Class 8.8 | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | M8-1.25 x 20 | m8x1.25 x20 hex flange screw cl8.8 zinc flake silver precote 80 rohs (i) din 6921 | 566.45716333389009 |
|
| Brikksen | FL | Hole Saws | Steel | 4 | 275hw0037 4 hole saw | 6 |
| |
| Brikksen | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | .854 x 1.445 x .040 | .854 x 1.445 x .040 washer ss per print | inquire |
|
| Brikksen | FL | Machine Screw | Plain / Furnace Black | #12 x 1 1/2 | #12 x 1-1/2 phillips flat 82 degree | 700 |
| |
| Brikksen | FL | Machine Screw | Plain / Furnace Black | #4-40 x 1 | 4-40 x 1 phillips pan head machine screw | 4000 |
| |
| Brikksen | FL | Finished Hex Nut | Plain / Furnace Black | 5/16-24 | 5/16-24 finished hex nut asme b18.2.2 | 5000 |
| |
| Brikksen | FL | Self-Tapping Thread Rolling Screw | Steel | Plain / Furnace Black | 1/4-10 x 5/8 | 1/4-10 x 5/8 thread forming screw steel | 20000 |
|
| SWACO | OH | Hex Head Cap Screw | Grade 8 | Plain / Furnace Black | 5/8-11 x 15 | 5/8-11x15 hhcs gr8 pln | 7 |
|
| SWACO | OH | Socket Head Cap Screw | ASTM A574 | Black Oxide | M4-0.70 x 50 | M4-0.70x50 shcs alloy 12.9 bo | 2268 |
|
| SWACO | OH | Flat Washer | Nylon (Polyamide) | Plain / Furnace Black | 1/4 x 1/2 x 1/4 | 1/4x1/2x1/4 flat washer (.259x.501x.251) nylon white | 1830 |
|
| SWACO | OH | Socket Head Cap Screw | Class 12.9 | Plain / Furnace Black | M8-1.25 x 35 | m8-1.25x35 shcs alloy 12.9 | 111 |
|
| SWACO | OH | Flat Washer | Steel | Plain / Furnace Black | washer flat nas1149c1732r | 85 |
| |
| SWACO | OH | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 2tlc-5c-0469w kato ss tangless insert locking dry film | 757 |
| |
| SWACO | OH | Hex Tap Bolt (Fully Threaded) | Grade A | Zinc/Clear | 1/4-20 x 3 | 1/4-20x3 hex tap bolt a307 gra zinc | 740 |
|
| SWACO | OH | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | M6-1.00 x 12 | M6-1.0x12 hex bhcs a2 blkox nylon patch as22 | 3485 |
|
| SWACO | OH | Hex Head Cap Screw | Class 8.8 | Plain / Furnace Black | M12-1.75 x 20 | m12-1.75x20 hhcs cl8.8 pln | 500 |
|
| Field Fas | IL | Lock Bolt with Collar (HuckBolt etc.) | Plain / Furnace Black | 55 | huck 121295 hose hyd 55 | 9 |
| |
| NBS | IL | Socket Head Flange Screw w/ ribs | Class 10.9 | Plain / Furnace Black | M12-1.75 x 25 | m12-1.75 x 25mm cl.100 griplox flanged socket screw-ribbed serrations-furnace black | 1000 |
|
| Field Fas | IL | O-Rings & Quad Ring Seals (X-Rings) | Plain / Furnace Black | o-ring | 5 |
| ||
| Field Fas | IL | Double End Stud | Plain / Furnace Black | 3/4-10 x 6 | 3/4-10 x 6 double end stud w/blue coat | 10 |
| |
| OneMonroe | MN | Heavy Hex Nut | Steel | Zinc/Clear | 1/2 x 15/64 | 1/4-20 hvy hex nut 1/2 x 15/64 stl znc | 3277 |
|
| OneMonroe | MN | Knobs & Star Grips | knurld knob/pointer | 1 |
| |||
| OneMonroe | MN | Spring-Loaded Plunger Pin, Pop Pin | Plain / Furnace Black | spring loaded index plunger | 15 |
| ||
| OneMonroe | MN | Finished Hex Nut | Nylon (Polyamide) | Plain / Furnace Black | #14 | auvecopak nylon nuts #14 screw size | 2 |
|
| OneMonroe | MN | Socket Head Cap Screw | Class 12.9 | Plain / Furnace Black | M8-1.25 x 55 | m8 x 1.25 x 55 cl 12.9 skt hd c/s-pln-unbrako | 100 |
|
| OneMonroe | MN | Abrasive Shop Rolls, Taper Rolls, etc. | Steel | Zinc/Clear | 4 x 24 | 4 x 24 50-grit sanding belt zirconium cloth back (2pk) | 5 |
|
| OneMonroe | MN | External Type SH Retaining Ring | Steel | Plain / Furnace Black | M8 | 8mm steel metric external retaining ring bulk din 471 | 70 |
|
| OneMonroe | MN | Latches & Catches | a | latch with cam | 11 |
| ||
| OneMonroe | MN | Metal Drill Bits | Steel | #43 | #43 brute platinum hvy duty drill | 12 |
| |
| OneMonroe | MN | Socket Head Cap Screw | Class 8.8 | Zinc/Clear | M3-0.50 x 6 | m3-.5 x 6 low soc cs gr8.8 zn din 7984-1717 | 130 |
|
| OneMonroe | MN | Key Stock | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 5/8 x 12 | 5/8 x 12 sq. key stock stainless | 4 |
| |
| OneMonroe | MN | SAE Flat Washer | Steel | Zinc/Yellow | 1/2 | 1/2 sae flat washer yellow zn | 1 |
|
| OneMonroe | MN | Hinges | 300 Stainless (A1,A2, 18-8,304,310 etc.) | stainless hinge | 11 |
| ||
| OneMonroe | MN | Measuring Tools | .5-20 | .5-20 wet film gauge | 47 |
| ||
| OneMonroe | MN | Magnets | horseshoe magnet | 491 |
| |||
| OneMonroe | MN | Weld Nut | Grade B | Plain / Furnace Black | 5/16-18 | 5/16-18 hex short pilot weld nut w/6 proj grade b steel/plain | 280 |
|
| OneMonroe | MN | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1-8 x 2.0 | 1-8x2.0 hhcs gr 5 zinc | 35 |
|
| OneMonroe | MN | Dowel Pin | Plain / Furnace Black | 7/8 x 3 | 7/8 x 3 dowel pin | 5 |
| |
| OneMonroe | MN | Finished Hex Nut | Grade 5 | Zinc/Clear | 1/2-13 | nut hex 1/2-13 znc plt grd 5 | 25 |
|
| OneMonroe | MN | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10-32 x 2 | #10-32 x 2 phillips ovalal head machine screw 18-8 stainless steel | 45 |
|
| API | IA | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M16-2.00 x 250 | screw hhc m16-2.0x250 8.8 zncl iso 4014 | 4 |
|
| API | IA | Finished Hex Nut | 316, 317, A4 Stainless | Plain / Furnace Black | 5/16-18 | nut hex 5/16-18 316 sst | 7100 |
|
| Alma Bolt | MI | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M14-2.00 x 140 | m14 x 2.0 x 140 zinc hex cap screw 8.8 din 931 | 220 |
|
| Alma Bolt | MI | Machine Screw | Plain / Furnace Black | 3/8-16 x 1 1/2 | 3/8-16 x 1 1/2 thumb mach screw plain pattern | 325 |
| |
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M8-1.25 x 25 | phillips flat head machine screw a2 ph m8-1.25 x 25 din 965 | inquire |
|
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M16-2.00 x 35 | socket head cap screw full thread a2 m16-2.0 x 35 din 912 | 100 |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Free Zinc Basecoat + Ceramic Topcoat (Ruspert, Ruspro, Dagger-Guard, etc.) | 1/4-20 x 5/8 | 1/4-20 x 5/8 hex head cs ss with sermaguard | inquire |
|
| Brikksen | FL | Self-Tapping Self-Drilling Screw (Tek etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #14 x 2 | 14 x 2 phillips pan tek 18-8ss #3 point | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M20-2.50 x 220 | hex head cap screw partial thread a2 m20-2.5 x 220 din 931 | 100 |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1-8 x 10 | 1-8 x 10 hex head cs ss/full thread f593d | inquire |
|
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M4-0.70 x 25 | m4-.7 x 25 socket head cap screw 18-8 ss 50 per small bag 5 small bags per master pack-generic brand din 912 | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #6-32 x 1 | 6-32 x 1 phillips round m/s ss | 500 |
|
| Brikksen | FL | Machine Screw | Steel | Zinc/Clear | M6-1.00 x 20 | phillips pan head machine screw-100 per bag ph m6-1.0 x 20 steel zinc din 7985 | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/16-18 x 2 3/4 | 5/16-18 x 2-3/4 hex hd cs ss f593c | 7000 |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Chrome Plated | 1/4-20 x 2 | 1/4-20 x 2 phillips pan m/s chrome ovaler 18-8 ss 25 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10 x 3 | #10 x 3 phillips pan head sms type-a 18-8 ss 50 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M8-1.25 x 60 | phillips flat head machine screw a2 ph m8-1.25 x 60 din 965 | 80 |
|
| Brikksen | FL | Carriage Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/16-18 x 1 | 5/16-18 x 1 short neck carriage bolt ss/chrome- | inquire |
|
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M24-3.00 x 60 | socket head cap screw full thread a2 m24-3.0 x 60 din 912 | inquire |
|
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M6-1.00 x 12 | low head (4mm) socket cap screw a2 m6-1.0 x 12 din 7984 | 16000 |
|
| Brikksen | FL | Coupling Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M12-1.75 x 19 | hex coupling nut a2 m12-1.75 din 6334 | 20 |
|
| Brikksen | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain / Furnace Black | M8-1.25 x 80 | hex head cap screw partial thread a4 m8-1.25 x 80 din 931 | 20 |
|
| Brikksen | FL | External Type E Retaining Ring (E-Clip) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/2 | #20 hose clip (3/4-1 3/4) 1/2 bnd 300ss | 15000 |
|
| Brikksen | FL | Hex Jam Nut | Brass | Plain / Furnace Black | 3/8-16 | 3/8-16 hex jam nut brass | inquire |
|
| Bossard | AZ | Hex Head Cap Screw | Steel | Plain / Furnace Black | screw hex hd cap bn624 | 80 |
| |
| Bossard | AZ | stud flush steel penn engineering | 5824 |
| ||||
| Bossard | AZ | Gloves & Hand Protection | glove powder free vinyl | 20 |
| |||
| Bossard | AZ | Protective Caps & Plugs | Plastic | Plain / Furnace Black | round vinyl cap .281 black | 52925 |
| |
| Optimas | IL | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M6 x 24 | M6x24 lg hex socket precision linear shaft 440c ss m3 thread (sl) | 190 |
|
| Optimas | IL | Socket Head Cap Screw | null | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | 3/8-16 x 1 1/4 | 3/8-16 x 1-1/4 asme b18.3 socket head cap screw alloy magni 565 rohs (i) | 2990 |
|
| Optimas | IL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M5-0.80 x 30 | m5x0.8 x 30 low hd socket cap screw a2 ss din 7984 | 4348 |
|
| HYBROCO | MI | Machine Screw | Steel | Zinc/Clear | #8-32 x 1 3/4 | 8-32 x 1-3/4 srh combo zn | 6618 |
|
| Brikksen | FL | Nails | 316, 317, A4 Stainless | #18 x 1 | #18 x 1 brad 316 ss (1815/lb) 100 per small bag 5 small bags per master pack-generic brand | inquire |
| |
| AFT Faste | TX | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | sanding discs psa 180 grit gold 100/bx | 2 |
| |||
| AFT Faste | TX | Cable Clamps & Ties | Nylon (Polyamide) | Plain / Furnace Black | 6 x 40 | 6 40 lb (0.13w 0.05t) proferred nylon 66uv rated 1000 hrs black cable tie | 5000 |
|
| Coburn Myers Fastening Systems | PA | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B8 | Plain / Furnace Black | heavy hex bolt (b7 b8 a307b etc.) a194 grade b7 plain | 4 |
| |
| Brikksen | FL | Machine Screw | 316, 317, A4 Stainless | Plain / Furnace Black | M6-1.00 x 12 | phillips flat head machine screw a4 ph m6-1.0 x 12 din 965 | inquire |
|
| Brikksen | FL | Euro Cabinet Screw | 316, 317, A4 Stainless | Plain / Furnace Black | #8-32 x 3/4 | 8-32 x 3/4 phillips ovalal m/s 316ss/euro white | 5000 |
|
| Brikksen | FL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M6-1.00 x 10 | socket set screw cup point a2 m6-1.0 x 10 din 916 | inquire |
|
| Brikksen | FL | Tooth Lock Washer (Int. & Ext.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain / Furnace Black | #10 | 10 internal tooth l/w 410ss | inquire |
|
| Brikksen | FL | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-20 x 1 1/4 | 1/4-20 x 1-1/4 flat soc cs ss | 8000 |
|
| Brikksen | FL | Cable Clamps & Ties | Nylon (Polyamide) | Plain / Furnace Black | 11 | 11 ty-rap 50# black nylon | 965000 |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M4-0.70 x 16 | m4-.7 x 16 phillips flat head m/s 18-8 ss 50 per small bag 5 small bags per master pack-generic brand din 965 | inquire |
|
| Brikksen | FL | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain / Furnace Black | 1/4-20 x 3 | 1/4-20 x 3 socket head cs 316ss | 1000 |
|
| Brikksen | FL | Hex Jam Nut | 316, 317, A4 Stainless | Plain / Furnace Black | M2-0.40 | hex jam nut (type-b thin) a4 m2-.40 din 439 | inquire |
|
| FasSpcMfg | FL | Set Screw (Square Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/16-18 x 3/4 | 5/16-18 x 3/4 square head set cup point 904l stainless | 3 |
|
| FasSpcMfg | FL | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain / Furnace Black | 1/4-20 x 7/8 | 1/4-20 x 7/8 socket cap 316 stainless 2a fit | 1238 |
|
| FasSpcMfg | FL | Sockets | Ni-Cu Alloy (Monel, K-Monel, etc.) | 3/8-16 x 1 | 3/8-16 x 1 socket set full dog point ni-cu | 3 |
| |
| FasSpcMfg | FL | Internal Wrenching Nut (Allenut) | Duplex Stainless (2205, Ferralium etc.) | Plain / Furnace Black | 1/2-13 x .83 | 1/2-13 x .83 allen nut per dwg duplex 2205 no color coding round od .835 (+/-.005) length tol .821/.836 threads 1/2-13 3a fit hex socket one end 1/2 x 3/8(ref) chamfer socket end .04 x 45deg | 3 |
|
| FasSpcMfg | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #6-32 x 1/2 | 6-32 x 1/2 socket cap 18-8 stainless | 144 |
|
| FasSpcMfg | FL | Sockets | Duplex Stainless (2205, Ferralium etc.) | 1/4-20 x .51 | 1/4-20 x .51 socket set cup point zeron 100 | 6 |
| |
| FasSpcMfg | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/2 | 6-blank x 1 1/2 soc cap blanks 18-8 stainless | 67 |
|
| FasSpcMfg | FL | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain / Furnace Black | 5/16-18 x 1 1/4 | 5/16-18 x 1-1/4 socket cap 316b stainless strain hardened 2a fit | 2 |
|
| OneMonroe | MA | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #12-11 x 3/4 | #12-11 x 3/4 phillips ovalal head sheet metal screw type-a 18-8 stainless steel | 90 |
|
| OneMonroe | MA | Lock Nut with Tooth L/W (K-Lock, Keps, etc.) | Steel | Zinc/Yellow | 1/2-13 | 1/2-13 yellow zinc free spinning washer conical nut | 200 |
|
| OneMonroe | MA | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #4-24 x 1 | #4-24 x 1 phillips flat head sheet metal screw type-a zinc | 4250 |
|
| OneMonroe | MA | Machine Screw | Steel | Zinc/Clear | #10-32 x 1/2 | 10-32 x 1/2 unslottedind hex m/s plated | 300 |
|
| OneMonroe | MA | Hex Machine Bolt | Grade 2 | Plain / Furnace Black | 1/4-20 x 3 1/4 | 1/4-20 x 3 1/4 hex hd bolt gr 2 z/cl | 4400 |
|
| OneMonroe | MA | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/16-18 x 1 | screw socket cap 5/16-18x1 s/s | 203 |
|
| OneMonroe | MA | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | #8-32 x 3/8 | 8-32 x 3/8 phillips flat undercut trilobe-zp | 64000 |
|
| Empire | WA | Self-Tapping Thread Rolling Screw | Steel | Plain / Furnace Black | M3 x 10 | m3 x 10 pan phil thread rolling screw | 1100 |
|
| Empire | WA | Metal Drill Bits | Titanium | 3/8 | 3/8 titanium jobber drill | 6 |
| |
| Empire | WA | Slotted Spring Pin (Roll Pin) | Steel | Plain / Furnace Black | 1/4 x 1/2 | 1/4x1/2 rolled spring pin plain | 300 |
|
| Raw Produ | NJ | Threaded Rod | Steel | Zinc/Clear | 1 1/8-7 x 6 | threaded rod zinc 1-1/8-7 x 6ft | 500 |
|
| Raw Produ | NJ | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Zinc/Clear | 9/16-18 | stover nuts cone lock nuts zinc 9/16-18 | 394 |
|
| Raw Produ | NJ | Turnbuckles | Steel | Plain / Furnace Black | 3/8-16 x 6 | turnbuckle body carbon steel 3/8-16 x 6 tb103 | 200 |
|
| Raw Produ | NJ | Self-Tapping Screw w/ Neo Bonded Washer (Roofing/Siding/Pole Barn Screw) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 17 | procap ss cap roofing screw 17 point-charcoal-#10 x 3 | 500 |
|
| Raw Produ | NJ | S-Hooks | Steel | Zinc/Clear | 10-0.188 x 2 7/8 | s hooks zinc s-10-0.188 x 2-7/8 | 859 |
|
| Raw Produ | NJ | Finished Hex Nut | Steel | Black Oxide | 1/4-20 | imetco hex nuts 1/4-20 black oxide | 500 |
|
| Raw Produ | NJ | Hex Head Cap Screw | Steel | Galvanized | 5/16-18 x 4 1/2 | hex cap screws hdg 5/16-18 x 4-1/2 pt | 771 |
|
| Raw Produ | NJ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 82 | ms phillips flat head 82 degree 18-8 ss-white low gloss poly-#8-32 x 3/8 | 500 |
|
| Raw Produ | NJ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 82 | ms phillips flat head 82 degree 18-8 ss-white low gloss poly-#8-32 x 3/8 | 500 |
|
| Raw Produ | NJ | Hex Head Cap Screw | Grade 8 | Plain / Furnace Black | 3/8-16 x 6 | hex cap screws grade 8 3/8-16 x 6 pt | 232 |
|
| Raw Produ | NJ | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain / Furnace Black | 9/16-18 x 1 | hex cap screws 316 ss 9/16-18 x 1 ft | 226 |
|
| Raw Produ | NJ | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Plain / Furnace Black | #8 x 1 1/4 | phillips wafer head w/self drilling point-red-#8 x 1-1/4 | 500 |
|
| Raw Produ | NJ | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/16 x 3/16 | dowel pins 304 ss 1/16 x 3/16 | 2555 |
|
| Raw Produ | NJ | Machine Screw | Brass | Plain / Furnace Black | #2-56 x 3/4 | brass slotted flat head ms #2-56 x 3/4 | 4143 |
|
| Raw Produ | NJ | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #12-24 x 1 | socket set screw 304 ss #12-24 x 1 | 500 |
|
| Raw Produ | NJ | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1 1/8-7 x 1.5d | heli-coil threaded inserts 303 ss 1-1/8-7 x 1.5d 21815 | 5 |
|
| Raw Produ | NJ | Bonded EPDM Sealing Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/2 | fastgrip 300 ss sp with 1/2 od bonded washer-white-#9 x 2-1/2 | 1000 |
|
| Raw Produ | NJ | Button Head Socket Cap Screw | Class 12.9 | Zinc/Clear | M10-1.50 x 20 | metric button head socket cap screws 12.9 zinc m10-1.50x20 mm iso 7380 | 640 |
|
| Raw Produ | NJ | Socket Head Cap Screw | Steel | Chrome Plated | 3/8-24 x 1 | socket cap screws chrome 3/8-24 x 1 mpb250s | 30 |
|
| Bamal Cor | GA | Single End Stud | Steel | Zinc/Clear | 7/8-9 x 2 7/8 | 7/8-9 x 2 7/8 single end stud zinc | 400 |
|
| AEROSPCE | MN | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M3-0.50 | m3x0.5 tangless free running 304sst insert | 500 |
|
| AEROSPCE | MN | Quick Access Panel Fasteners (1/4 Turn etc.) | 1/4 | 82-12-120-16 dzus 1/4 turn stud | 131 |
| ||
| AEROSPCE | MN | Broaching Style Threaded Insert (Press-Nut, Swage Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | cls-m8-2 pem self-clinching nut #302/303 sst | 9 |
| |
| AEROSPCE | MN | Broaching Style Threaded Insert (Press-Nut, Swage Nut) | Plain / Furnace Black | 032-2 | ss-032-2zi pem self-clinching nut heat treated | 2000 |
| |
| F. Solutions | OH | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B7 | Plain / Furnace Black | 7/8-9 x 5 1/4 | heavy hex bolt 7/8-9x5-1/4 sa193 b7 | 24 |
|
| F. Solutions | OH | Self-Tapping Self-Drilling Screw (Tek etc.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain / Furnace Black | hex head self drilling screw 1/4x1-1/2 410 ss epoxy finish | 600 |
| |
| F. Solutions | OH | Fully Threaded Stud (All Thread) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/4-10 x 2 3/4 | stud full thread 3/4-10x2-3/4 304 ss | 2 |
|
| National | Ont | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M3 x 6 | m3x6 hx sk cp sc full thread a2-70 s.s. din 912 | 1200 |
|
| National | Ont | Push-on Nut (Pushnut, Starlock Washer, etc.) | Steel | Plain / Furnace Black | .093-.126 | nut retainer .093-.126 | 22000 |
|
| National | Ont | Compression Fittings | Steel | M22-7.00 | 22mm x 7mm compression limiter 1010 steel ps12182 | 142800 |
| |
| Mansco | MI | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M8-1.25 x 25 | m8-1.25 x 25mm hex cap cl10.9 triv znc f/t 100/box din 933 | 100 |
|
| Mansco | MI | Flat Head Socket Cap Screw | Steel | Plain / Furnace Black | 5/16-18 x 1 | 5/16-18 x 1 flat hd soc cap scr pln | 305 |
|
| Mansco | MI | Bonded Abrasives (Chop Saw/Cut Off Wheels, Grinding Wheels, etc.) | 14 x 5/32 x 1 | 14x5/32x1 gemini cut off wheel ty-01 a/o 2-ply for decking 10/box | 60 |
| ||
| F. Solutions | OH | Carriage Bolt | Steel | Zinc/Clear | 3/8-16 x 12 | carriage bolt steel 3/8-16x12 zinc plated | 14 |
|
| AFI | FL | Machine Screw | Steel | Zinc/Clear | #4-40 x 7/16 | 4-40x7/16 phil pan ms st zn rohs () () | 3400 |
|
| AFI | FL | Self-Tapping Thread Rolling Screw | Steel | Black Oxide | #8 x 3/4 | 8 x 3/4 phil mod trs sd st blk ox. () () | 4000 |
|
| AFI | FL | Socket Head Cap Screw | Ni-Cu Alloy (Monel, K-Monel, etc.) | Plain / Furnace Black | #10-32 x 5/8 | 10-32x5/8 soc hd cs monel () | 511 |
|
| AFI | FL | T-Nut (Tee Nut) | Steel | Zinc/Clear | 1/4-20 x 9/16 | 1/4-20x9/16 zinc finish 6 prong tee nut () | 13104 |
|
| AFI | FL | pin stop z100 () | 1508 |
| ||||
| AFI | FL | Self-Clinching Stud | Steel | Zinc/Clear | heavy flush head stud steel clear zinc () | 510 |
| |
| Global Fa | TX | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Brass | Plain / Furnace Black | M3-0.5-3.96 x 6.4 | m3-0.5x3.96x6.4 brassstandard/expansion insert heli-coil 70017-3-064 | 2200 |
|
| Olander | CA | Flat Head Socket Cap Screw | Steel | Plain / Furnace Black | 10-32 x 3/4 flat soc alloy black | 794 |
| |
| Olander | CA | Solid Rivet | Steel | Zinc/Clear | universal hd rivet pltd stl | 98 |
| |
| Olander | CA | Hex Male/Female Standoff | Brass | Zinc/Clear | m3-.5 x 6 x 4.5mm hex m/f standofff br zn | 52 |
| |
| Olander | CA | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Cadmium | 1/4-28 locking tgls heli-coil ins cad plt | 79 |
| ||
| Olander | CA | Panel Nut | Steel | Plain / Furnace Black | #8-32 | 8-32 x 11/32af pnl nut .078 thk sst () () | 1673 |
|
| Olander | CA | Flat Washer | Steel | Plain / Furnace Black | 2 | 2 f/w stl ni .250 .093 .032 () () | 1833 |
|
| Olander | CA | Springs (Compression) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | lee spring comp spring sst () () | 9 |
| ||
| Olander | CA | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | 5/8-11 | 1926-10 5/8-11 heli-coil twins thrd plug () () | 1 |
| ||
| Olander | CA | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #4-40 x 5/16 | 4-40x5/16 but soc ccp cln 100/bg sst () () | 500 |
|
| F. Solutions | OH | Two-Piece Wedge Lock Washer (Heico-Lock, Disc-Lock, etc.) | Steel | Zinc/Clear | M14 | nordlock style m14 zinc plated | 15 |
|
| FTS | OH | External Type E Retaining Ring (E-Clip) | Steel | Plain / Furnace Black | waldes/truarc/truarc5103-37-s | 25000 |
| |
| Arden | WI | Machine Screw | Steel | Plain / Furnace Black | #6-32 x 1/4 | 632x1/4 phillips flat 100 m/s | inquire |
|
| Arden | WI | Machine Screw | Steel | Zinc/Clear | #8-32 x 1/2 | 832x1/2 slotted round washer ms zc | inquire |
|
| BHAM | TX | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Plain / Furnace Black | 7/8-9 x 6 | 7/8-9x6 a325 heavy hex bolt assembly b18.2.1 b18.2.6 | 2 |
|
| FDL | IL | Split Lock Washer | Steel | Zinc/Clear | 5/8 | 5/8 med split lockwashers steel zinc per asme b18.21-1 1999 2000pcs/ctn & 22.27kgs/ctn b18.21.1 b27.1 | 62820 |
|
| THRDFAST | OK | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Zinc/Clear | 1 1/4-7 x 4 | a325 type-1 str/b domestic b18.2.1 b18.2.6 | 1 |
|
| THRDFAST | AL | Machine Taps | M4.5-0.75 | bottom tap | 4 |
| ||
| THRDFAST | MS | Threaded Rod | Grade 8 | Plain / Furnace Black | 1/4-20 x 6 | ft gr 8 a/t rod b18.31.3 | 18 |
|
| THRDFAST | FL | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 5/8 | nf-18x2 3/4 gr8 hex c/s z&y b18.2.1 | 25 |
|
| THRDFAST | MS | Metal Drill Bits | 15/32 | h.s. jobber drill bit | 43 |
| ||
| Lightning | LA | Threaded Rod | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain / Furnace Black | 3/8-16 x 12 | ft all thread rod hastelloy c-276 | 26 |
|
| Lightning | LA | Socket Head Cap Screw | Class 12.9 | Plain / Furnace Black | M12-1.25 x 65 | socket c/s | 412 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
