FCH Member Advertisement
FCH News
Studs & Threaded Rod
49,600 Studs & Threaded Rod, showing 200, (click on any line for more information)
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Shadran I | Double End Stud | Plain | 5/16 x 2 | 5/16x2 manifold stud | 8 |
| ||
| OneMonroe | NC | Wheel Stud (Screw-in & Press-in) | Rubber, Buna-N, Neoprene etc. | Plain | 3 1/2 x 1 3/8 | caster swivel plate wheel sz 3-1/2 x 1-3/8 wheel mat neoprene rubber bearing ball load ht 4-3/4 top plate sz 2-1/2 x 3-5/8 bolt hole ptrn 1-3/4 x 3 load cap 200 lbs. | 4 |
|
| OneMonroe | NC | Wheel Stud (Screw-in & Press-in) | Steel | Zinc/Clear | 2 1/2 x 1 3/4 | caster rigid-plate wheel sz 2-1/2 x 1-3/4 wheel mat polyolefin bearing plain load ht 3-1/2 top plate sz 2-3/4 x 3-3/4 bolthole pattern 1-3/4 x 2-5/8 slotted to 3 load cap 300lbs. | 328 |
|
| OneMonroe | NC | Wheel Stud (Screw-in & Press-in) | Rubber, Buna-N, Neoprene etc. | Plain | 2 3/4 x 3 3/4 | caster rigid plate wheel sz 3 x 1-1/4 wheel mat so ft rubber bearing sintered w/brake load ht 3-7/16 top plate sz 2-3/4 x 3-3/4 bolthole pattern 1-3/4 x 3 load cap 125lbs. | 90 |
|
| OneMonroe | NC | Ball Stud, Ball Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M13 | cstrswivnyl5in tpr13mm hkpttl lock 5in grey nylon total lock 13mm hollow kingpin stainless swivel bearing grey tpr tire stainless ball bearings | 4 |
|
| OneMonroe | NC | Wheel Stud (Screw-in & Press-in) | Steel | Zinc/Clear | 2 1/2 x 3 5/8 | caster rigid plate wheel sz 4 x 1-1/4 wheel mat polyolefin bearing plain bore load ht 5-1/8 top plt sz 2-1/2 x 3-5/8 bolt hole ptrn 1-3/4 x 2-7/8 to 3 load cap 265 lbs. | 140 |
|
| OneMonroe | NC | Wheel Stud (Screw-in & Press-in) | Steel | Zinc/Clear | 2 3/4 x 3 3/4 | caster rigid-plate wheel sz 3 x 1 wheel mat polyolefin bearing plain load ht 3-13/16 top plate sz 2-3/4 x 3-3/4 bolthole pattern 1-3/4 x 3 load cap 125lbs. | 360 |
|
| OneMonroe | NC | Wheel Stud (Screw-in & Press-in) | Rubber, Buna-N, Neoprene etc. | Plain | 2 x 13/16 | caster dual wheel rigid-plate wheel sz 2 x 13/16 wheel mat hard rubber bearing sintered load ht 2-15/16 top plate sz 1-7/8 x 2-5/8 bolthole pattern 15/16 x 2-1/8 load cap 200lbs. | 385 |
|
| OneMonroe | NC | Threaded Rod | Steel | Plain | 36 | rod assembly 36 | 10 |
|
| OneMonroe | NC | Wheel Stud (Screw-in & Press-in) | Steel | Zinc/Clear | 4 1/2 x 6 1/4 | caster dual-wheel rigid plate wheel sz 6 x 2 wheel mat heavy duty cst iron bearing roller load ht 7-1/2 top plate sz 4-1/2 x 6-1/4 bolt hole ptrn 2-7/16 x 4-15/16 slotted to 3-3/8 x 5-1/4 load cap 2000 lbs temp rt up to +800 f | 4 |
|
| OneMonroe | NC | Wheel Stud (Screw-in & Press-in) | Steel | Zinc/Clear | 2 5/8 x 3 5/8 | caster swivel plate wheel sz 6 x 2 wheel mat polyurethane on polypropylene bearing roller top plt sz 4 x 4-1/2 bolt hole ptrn 2-5/8 x 3-5/8 slotted to 3 x 3 load ht 7-1/2 load cap 720 lbs temp rt-40 to +180 f | 4 |
|
| OneMonroe | NC | Fully Threaded Stud (All Thread) | Steel | Zinc/Clear | 5/16-18 x 6 | 5/16-18 x 6 full thread stud plated | 15 |
|
| OneMonroe | NC | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 5/8-11 x 7 | 5/8-11 x 7 a193 b7 fully threaded stud | 155 |
|
| OneMonroe | NC | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 1 1/8-8 x 7 1/2 | 1-1/8-8x7-1/2 (oal 7-3/4 ) a193 b7 fully threaded stud | 26 |
|
| OneMonroe | Deformed Bar Anchor Stud, Rebar | Plain | #6 | 6 mini srd twin-leg fbh carab + st rebars | 1 |
| ||
| OneMonroe | NC | Fully Threaded Stud (All Thread) | Steel | Plain | 3/8-16 x 1 1/4 | 3/8-16 x 1 1/4 threaded stud 3/4 shank | 200 |
|
| OneMonroe | NC | Self-Clinching Stud | Steel | Plain | pemref fhs-632-4 self clinching studs | 1000 |
| |
| OneMonroe | NC | Self-Clinching Stud | Steel | Plain | pemref fhs-832-8 self clinching studs | 300 |
| |
| OneMonroe | NC | Ball Stud, Ball Pin | Steel | Plain | M16 x 10 x 16 | ball stud16mmm10 threadhex | 79 |
|
| OneMonroe | NC | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 7/8-9 x 12 | 7/8-9 x 12 a193 b7 fully threaded stud | 24 |
|
| OneMonroe | NC | Resistance/Projection Weld Stud | Steel | Plain | 1/4-20 x 1/2 | 1/4-20 x 1/2 steel nibs under head projection spade weld screw | 850 |
|
| Jackson | MS | Resistance/Projection Weld Stud | Grade 55 | Plain | 5/8-11 x 21 | 5/8-11 x 21 oal astm f1554-grade 55 double end roll thread stud 2 rt x 5 rt .with an astm a563 grade a heavy hex nut tack welded on the short thread end plain finish | 37 |
|
| Jackson | MS | Fully Threaded Stud (All Thread) | Grade B7 | Zinc/Yellow | 5/8-11 x 6 | b7 stud and | 334 |
|
| Jackson | MS | Threaded Rod | Brass | Plain | 5/8 x 24 | 5/8 x 24 nc all thread rod brass | 1 |
|
| OneMonroe | NC | Fully Threaded Stud (All Thread) | Grade B7 | Zinc/Clear | 3/4-10 x 6 | 3/4-10 x 6 a193 b7 zinc fully threaded stud | 5 |
|
| OneMonroe | NC | Fully Threaded Stud (All Thread) | Grade B7M | Plain | 5/8-11 x 4 3/4 | 5/8-11x4-3/4 (oal 5 ) a193 b7m fully threaded stud | 1 |
|
| OneMonroe | NC | Wheel Stud (Screw-in & Press-in) | Plastic | Zinc/Clear | 2 1/2 x 3 5/8 | caster swivel-plate wheel sz 3 x 1-1/4 wheel mat black polypropylene bearing delrin w/face contact brake load ht 4-11/16 top plate sz 2-1/2 x 3-5/8 bolt hole ptrn 1-3/4 x 2-13/16 slotted to 3-1/16 load cap 350 lbs temp rt-20 to +180f | 4 |
|
| OneMonroe | NC | Wheel Stud (Screw-in & Press-in) | Rubber, Buna-N, Neoprene etc. | Plain | 3 1/2 x 1 1/4 | caster swivel plate wheel sz 3-1/2 x 1-1/4 wheel mat solid rubber bearing plain bore top plt sz 4 x 4-1/2 bolt hole ptrn 2-5/8 x 3-5/8 slotted to 3 x 3 load ht 6-3/16 load cap 350 lbs temp rt-40 to +180 f | 45 |
|
| Century | FL | Fully Threaded Stud (All Thread) | Plain | 5/8-11 x 3.50 | cl-5/8-11x3.50-stud carr lane cl-5/8-11x3.50-stud | 12 |
| |
| Century | FL | Double End Stud | Grade 5 | Zinc/Yellow | 5/16-18 x 16.593 | 5/16-18 x 16.593 double end stud rev j grade 5 zinc yellow (see print) q2b | 11 |
|
| Century | FL | Double End Stud | Steel | Zinc/Yellow | 1/4-20 x 16.130 | 1/4-20 x 16.130 double end stud rec c q2b stressproof 1144 steel b633typeii zy | 10 |
|
| Century | FL | Fully Threaded Stud (All Thread) | Grade B7 | Zinc/Clear | 3/8-16 x 1 1/4 | 3/8-16 x 1 1/4 sae 193 grd b7 stud full thread zinc | 10 |
|
| Century | FL | Threaded Rod | 316, 317, A4 Stainless | Plain | M14 x 1 | m14x 1m thread rod in a4 ss m14 thread rod in a4 ss din 975 | 10 |
|
| Century | FL | Fully Threaded Stud (All Thread) | Plain | 5/8-11 x 4.00 | cl-5/8-11x4.00-stud carr lane cl-5/8-11x4.00-stud | 10 |
| |
| Century | FL | Resistance/Projection Weld Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 1/2 | ohio hwz2108 1/4-20x1/2 weld screw s/s | 10 |
|
| Century | FL | Self-Clinching Stud | Steel | Zinc/Clear | #0 x 42 | fh-0420-32 flush hd stud stl zinc ch420-32 | 10 |
|
| Century | FL | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 1 1/4-8 x 6 | 1-1/4-8 x 6 stud b7 | 10 |
|
| Century | FL | Double End Stud | 316, 317, A4 Stainless | Plain | 3/8-16 x 2 3/4 | 3/8-16 x 2-3/4 double end stud 316ss class 3 thread lgt 3/8 class 2 thread lgt 2 | 8 |
|
| Century | FL | Fully Threaded Stud (All Thread) | Steel | Plain | nas1829c4g06 post elec-mech eqpt(stud) .375l .164-32 m/fem cres | 266 |
| |
| Century | FL | Double End Stud | Class 8.8 | Plain | M12 x 75 | a02815a39 2442 m12 x 75mm double end stud one end 50mm oth end 15 mm grade 8.8 | 7 |
|
| Century | FL | Double End Stud | Duplex Stainless (2205, Ferralium etc.) | Plain | M12 | a02815a41-2435 double end stud m12(1.75) x 65 mm double end stud toe= 15mmtoe= 45mm ss per astm a276 type s31803 | 2 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Steel | Galvanized | 3/4-10 x 6 1/2 | 3/4-10x6-1/2 o/a carbon steel all thread stud hdg | 2 |
|
| SunPack | FL | Double End Stud | Grade A36 | Galvanized | 1-8 x 22 | 1-8x22 f1554 gr36 double end stud hdg w/4 of thread | 1 |
|
| SunPack | FL | Threaded Rod | Grade 55 | Galvanized | 1/2-13 x 12 | 1/2-13x12ft f1554 gr55 all thread rod hdg | 96 |
|
| SunPack | FL | Threaded Rod | Grade 55 | Galvanized | 5/8-11 x 12 | 5/8-11x12ft f1554 gr55 all thread rod hdg | 461 |
|
| SunPack | FL | Threaded Rod | Grade 55 | Galvanized | 3/4-10 x 12 | 3/4-10x12ft f1554 gr55 all thread rod hdg | 1,903 |
|
| SunPack | FL | Threaded Rod | Grade 55 | Galvanized | 1-8 x 12 | 1-8x12ft f1554 gr55 all thread rod hdg | 165 |
|
| SunPack | FL | Threaded Rod | Grade B16 | Plain | 1 3/8-8 x 12 | 1-3/8-8x12 a193 b16 all thread rod plain domestic | 319 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B8M | Plain | 1-8 x 10 1/2 | 1-8x10-1/2 o/a a193 b8m ss all thread stud | 60 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B7 | Galvanized | 3/4-10 x 6 1/2 | 3/4-10 x 6-1/2 o/a a193 b7 all thread stud hdg | 24 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 7/8-9 x 4 3/4 | 7/8-9 x 4-3/4 o/a a193 b7 all thread stud w/2 a194 2h hvy hex nuts plain | 109 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 3/4-10 x 8 1/2 | 3/4-10 x 8-1/2 o/a a193 b7 all thread stud plain | 8 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B7 | Galvanized | 1 1/2-6 x 10 1/2 | 1-1/2-6 x 10-1/2 o/a a193 b7 all thread stud hdg domestic coarse thread | 1 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B8M | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 5/8-11 x 4 1/4 | 5/8-11 x 4-1/4 o/a a193 b8m cl2 316ss all thread stud ptfe blue | 10 |
|
| SunPack | FL | Threaded Rod | Silicon Bronze | Plain | 3/4-10 x 12 | 3/4-10x12 651 silicon bronze all thread rod | 316 |
|
| SunPack | FL | Threaded Rod | Silicon Bronze | Plain | 7/8-9 x 12 | 7/8-9x12 651 silicon bronze all thread rod | 202 |
|
| SunPack | FL | Threaded Rod | Silicon Bronze | Plain | 1-8 x 12 | 1-8x12 651 silicon bronze all thread rod | 87 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Silicon Bronze | Plain | 1/2-13 x 2 | 1/2-13x2 o/a 651 silicon bronze all thread stud | 145 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Silicon Bronze | Plain | 5/8-11 x 3 1/4 | 5/8-11x3-1/4 o/a 651 silicon bronze all thread stud | 20 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Silicon Bronze | Plain | 5/8-11 x 3 1/2 | 5/8-11x3-1/2 o/a f468 651 silicon bronze all thread stud | 1 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Silicon Bronze | Plain | 5/8-11 x 4 | 5/8-11x4 o/a f468 651 silicon bronze all thread stud | 3 |
|
| Endries | WI | Threaded Rod | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18x3ft 18-8 stainless steel thread rod (sold per foot) | 12 |
| |
| Endries | WI | Fully Threaded Stud (All Thread) | Grade B8 | Plain | 1-8x7-1/2 f irst thread to first thread sa193 grade b8 cls2 full thread stud with certified material test report | 4 |
| |
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B7 | Galvanized | 3/4-10 x 3 | 3/4-10x3 o/a a193 b7 all thread stud hdg | 35 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B8M | Plain | 5/8-11 x 3 | 5/8-11x3 o/a a193 b8m ss all thread stud | 26 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 4 | 3/4-10 x 4 o/a 304 ss all thread stud | 8 |
|
| ASFCORP | Fully Threaded Stud (All Thread) | Steel | ASTM F1941-10 Fe/Zn-Ni | M13 | m8-1.25 matpoint standard x 23.35 one end 13mm dia x 10.69 overall length ball stud other end hex washer stud 4037 steel neutral hardened hrc 32-39 gmw4700 code g type b+nylon patch per ifi 524 per blue print sp-00904898 b.1 cso 6/30/22 | 12464 |
| |
| ASFCORP | Self-Clinching Stud | Class 10.9 | ASTM F1941-10 Fe/Zn-Ni | M10-1.50 | m10-1.5 6h thread after plating x 25 clinch stud pc point class 10.9 fe/znni(12)10/a/t2+thread masking per nd lm-1293 sp-00687956 rev b.1 cso 11/16/21 | 57000 |
| |
| ASFCORP | Self-Clinching Stud | Class 10.9 | ASTM F1941-10 Fe/Zn-Ni | M6-1.00 | m6-1 6h thread after plating x 21.27 clinch stud dog point class 10.9 fe/znni(12)10/a/t2+thread masking per nd lm-1293 sp-00546276 rev a.1 cso 11/16/21 | 97758 |
| |
| ASFCORP | Self-Clinching Stud | Class 10.9 | ASTM F1941-10 Fe/Zn-Ni | M8-1.25 | m8-1.25 6h thread after plating x 26 clinch stud pc point class 10.9 fe/znni(12)10/a/t2+thread masking per nd lm-1293 sp-00497663 rev b.1 cso 11/16/21 | 30800 |
| |
| ASFCORP | Fully Threaded Stud (All Thread) | Steel | ASTM F1941-10 Fe/Zn-Ni | M10 | m8-1.25 matpoint very short x 25 conical washer 24mm od one end 10mm diameter x 22.53 overall length ball stud other end hex collar stud assembly 4037 neutral hardened steel hrc 32-39 gmw4700 code g type b+precote 85 per blue print sp-00716662 a.1 cso 6/2 | 12470 |
| |
| ASFCORP | Headed Weld Stud, Shear Connector | Plain | T61.60 x 14 | t6-1.60 x 14 headed weld stud en aw-5019 (aimg5) polished sp-00395793 a.1 cso 11/8/21 | 0 |
| ||
| ASFCORP | Threaded Rod | Grade B7 | Plain | 1 3/8-6 x 10 | 1 3/8-6 x 10 ft thread rod a193 gr b7 | 19 |
| |
| ASFCORP | Double End Stud | Grade 8 | Plain | 1 1/4-7 x 20 | 1 1/4-7 x 20 6 in thread one end 3 in thread other end double end stud gr 8 pkg | 100 |
| |
| ASFCORP | Fully Threaded Stud (All Thread) | Steel | ASTM F1941-10 Fe/Zn-Ni | M13 | m8-1.25 matpoint standard x 23.35 one end 13mm dia x 10.69 overall length ball stud other end hex washer stud 4037 steel neutral hardened hrc 32-39 gmw4700 code g type b+nylon patch per ifi 524 per blue print sp-00904898 b.1 cso 6/30/22 | 12464 |
| |
| ASFCORP | Resistance/Projection Weld Stud | Plain | M8-1.25 | m8-1.25 round 3 projection with 2.43mm pilot height weld sae 1008-1018 plain+pickle+dubbois rust inhibitor 11589186 revision 003a | 29000 |
| ||
| ASFCORP | Threaded Rod | Class 4.6 | Plain | M8-1.25 x 2 | m8-1.25lh thread x 2 meter thread rod cl 4.6 l din 975 | 57000 |
| |
| ASFCORP | Fully Threaded Stud (All Thread) | Grade A | ASTM F1941-10 Fe/Zn | 3/8-16 x 1 7/8 | 3/8-16 x 1 7/8 in shear ends full thread stud a307 gr a tri zn fe/zn 5an | 1886 |
| |
| ASFCORP | Threaded Rod | Grade B7 | Plain | M16-2.00 x 3 | m16-2 x 3 meter thread rod a193 gr b7 din 975 | 14 |
| |
| ASFCORP | Self-Clinching Stud | Class 8.8 | ASTM F1941-10 Fe/Zn-Ni | M6-1.00 | m6-1 6h thread after plating x 16 clinch stud class 8.8 fe/znni(12)10/a/t2+thread masking per nd lm-1293 sp-01955926 rev a.1 cso 11/16/21 | 2185 |
| |
| ASFCORP | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 2-4 1/2 x 14 1/4 | 2-4 1/2 x 14 1/4 in 14 1/2 in oal chamfer ends full thread stud a193 gr b7 | 16 |
| |
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B7 | Galvanized | 3/4-10 x 4 | 3/4-10x4 o/a a193 b7 all thread stud hdg | 549 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 1 1/8-8 x 6 1/2 | 1-1/8-8x6-1/2 o/a a193 b7 all thread stud plain domestic | 16 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B8M | Plain | 5/8-11 x 4 1/4 | 5/8-11 x 4-1/4 o/a a193 b8m ss all thread stud | 4 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B8M | Plain | 5/8-11 x 4 | 5/8-11 x 4 o/a a193 b8m ss all thread stud | 16 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 3/4-10 x 6 | 3/4-10 x 6 o/a a193 b7 all thread stud plain domestic | 44 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/8-11 x 3 | 5/8-11 x 3 o/a 304 ss all thread stud | 40 |
|
| SunPack | FL | Fully Threaded Stud (All Thread) | 316, 317, A4 Stainless | Plain | 5/8-11 x 8 | 5/8-11 x 8 o/a 316 ss all thread stud | 4 |
|
| MetricThrd | CA | Arc Weld Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10 x 38 | M10x38 din 13918-a2 s.s arc weld stud ft | 300 |
|
| MetricThrd | CA | Double End Stud | Class 8.8 | Zinc/Clear | M12 x 30/45 | M12x30/45 8.8 zn double end stud bolts din 939-cl | 340 |
|
| MetricThrd | CA | Fully Threaded Stud (All Thread) | Class 4.6 | Zinc/Clear | M10 x 390 | M10x390 cl 4.6 zinc traivaning full thread studs din 976-1 | stock |
|
| MetricThrd | CA | Fully Threaded Stud (All Thread) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 3 | 7/16-14x3.410 s.s 18-8 double ended studs full body thread length 1.1/0.75 | stock |
|
| MetricThrd | CA | Fully Threaded Stud (All Thread) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 2.970 | 7/16-14x2.970 s.s 18-8 double ended studs full body thread length 1.1/0.75 | stock |
|
| MetricThrd | CA | Wheel Stud (Screw-in & Press-in) | Class 10.9 | Zinc/Clear | M12-1.25 x 32.5 | M12-1.25x32.5 cl 10.9 zn wheel studs w/round head/30 | 410 |
|
| MetricThrd | CA | Fully Threaded Stud (All Thread) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 1.725 | 7/16-14x1.725 s.s 18-8 double ended studs full body thread length 1.1/0.50 | stock |
|
| MetricThrd | CA | Fully Threaded Stud (All Thread) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 4 1/220 | 7/16-14x4.520 s.s 18-8 double ended studs full body thread length 1.1/0.50 | stock |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
