FCH Member Advertisement
FCH News
Studs & Threaded Rod
53,356 Studs & Threaded Rod, showing 200, (click on any line for more information)
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Jackson | MS | Threaded Rod | Grade B7 | Plain | 3/4-16 x 3 | nf b7 rod | 41 |
|
| Jackson | MS | Threaded Rod | Grade B7 | Plain | 1 1/8-8 x 12 | tpi b7 rod | 11 |
|
| Jackson | MS | Threaded Rod | Steel | Galvanized | 1 x 12 | feet nc all thread rod h.d.g. | 77 |
|
| Jackson | MS | Threaded Rod | Steel | Zinc/Clear | 3/8-24 x 3 | national fine all thread rod | 37 |
|
| Jackson | MS | Threaded Rod | Steel | Zinc/Clear | 3/4 x 10 | feet nc all thread rod | 26 |
|
| Jackson | MS | Threaded Rod | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 3 | national coarse all thread rod 18-8 s/s | 90 |
|
| Jackson | MS | Threaded Rod | Grade B8 | Plain | 1 3/4-8 x 12 | astm a193 b8 stainless fully threaded rod not stamped with mtrs | 1 |
|
| Jackson | MS | Resistance/Projection Weld Stud | Grade A36 | Plain | 1 x 30 | oal a36 d.e. stud 1.5 rtx6 rt with 3 square plate 3/8 thick & hvy nut welded on short thread end finish | 4 |
|
| Jackson | MS | Double End Stud | Grade 5 | Plain | stud double end roll thread gr.55 1-8x21 oal 2 rtx5 rt with heavy hex nut tack welded | 7 |
| |
| Jackson | MS | Threaded Rod (Acme Thread) | Steel | Plain | 3/8-12 x 12 | 3/8-12x12 acme threaded rod | 2 |
|
| Jackson | MS | Double End Stud | Steel | Plain | 1/2 x 3 23/32 x 1 15/16 | 1/2 x 3 oal 23/32 nc x 1-15/16 nf double end stud 1040 carbon steel plain finish | 6 |
|
| Jackson | MS | Double End Stud | Class 8.8 | Plain | stud double end metric m12 x 1.75 pitch x 50mm oal 30mm x 15mm cut threads class 8.8 plain finish din 939-8 coarse thread | 15 |
| |
| Jackson | MS | Double End Stud | Class 8.8 | Plain | stud double end metric m12 x 1.75 pitch x 55mm oal 25mm x 15mm cut threads class 8.8 plain finish din 939-8 coarse thread | 6 |
| |
| MAINSOURC | NH | Resistance/Projection Weld Stud | Steel | Plain | ohio hw-1606 weld screw | 114 |
| |
| MAINSOURC | NH | Fully Threaded Stud (All Thread) | Steel | Plain | panduit p14-6r | 1656 |
| |
| Jackson | MS | Fully Threaded Stud (All Thread) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2 x 6 | nc fully threaded stud 18-8 ss cut from atr | 1 |
|
| Jackson | MS | Threaded Rod | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/8-11 x 12 | feet nc all thread rod 18-8 s/s | 16 |
|
| Jackson | MS | Threaded Rod | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/8-18 x 3 | national fine all thread rod 18-8 ss | 2 |
|
| Jackson | MS | Threaded Rod | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4 x 3 | nc all thread rod 18-8 ss | 11 |
|
| Jackson | MS | Threaded Rod | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4 x 6 | feet nc all thread rod 18-8 ss | 1 |
|
| Jackson | MS | Threaded Rod | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 12 | feet nc all thread rod 18-8 ss | 13 |
|
| Jackson | MS | Threaded Rod | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-16 x 3 | national fine all thread rod 18-8 ss | 5 |
|
| Jackson | MS | Threaded Rod | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/8 x 3 | nc all thread rod 18-8 ss | 1 |
|
| Jackson | MS | Threaded Rod | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/8 x 12 | feet nc all thread rod 18-8 ss | 7 |
|
| Jackson | MS | Threaded Rod | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/8-14 x 3 | national fine all thread rod 18-8 ss | 2 |
|
| Jackson | MS | Threaded Rod | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 x 12 | feet nc all thread rod 18-8 ss | 6 |
|
| Jackson | MS | Threaded Rod | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1-14 x 3 | fine thread all thread rod 18-8 ss | 2 |
|
| Jackson | MS | Threaded Rod | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/8 x 3 | nc all thread rod 18-8 ss | 2 |
|
| Jackson | MS | Threaded Rod | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/8-7 x 6 | nc all thread rod 18-8 s/s | 1 |
|
| Jackson | MS | Threaded Rod | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/8-7 x 12 | nc all thread rod 18-8 s/s | 4 |
|
| Jackson | MS | Threaded Rod | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4 x 3 | nc all thread rod 18-8 ss | 6 |
|
| Jackson | MS | Threaded Rod | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/4-7 x 12 | feet nc all thread rod 18-8 ss | 1 |
|
| Jackson | MS | Threaded Rod | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 3/8-8 x 12 | all thread rod 18-8 ss | 1 |
|
| Jackson | MS | Threaded Rod | Grade B8 | Plain | 1 1/2-8 x 12 | 1 1/2-8 tpix12 nc all thread rod 304 stainless (a193-b-8 class 1) | 2 |
|
| Jackson | MS | Threaded Rod | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 1/2 x 3 | nc all thread rod 18-8 ss | 1 |
|
| TownCountry | AR | Fully Threaded Stud (All Thread) | Steel | Zinc/Clear | 5/16-18 x 1 1/2 | 5/16-18 x 1 1/2 stud fully threaded zinc #g2245677 | 100 |
|
| MAINSOURC | NH | Self-Clinching Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 1.00 | pem fhs-0420-16 | 75 |
|
| MAINSOURC | NH | Self-Clinching Stud | Steel | Zinc/Clear | M4-0.70 x 10 | pem fh-m4-10 | 1954 |
|
| MAINSOURC | NH | Threaded Rod | Steel | Zinc/Clear | 1/2-13 x 72 | 1/2-13x72 allthread rod plated | 2118 |
|
| Weaver | WA | Fully Threaded Stud (All Thread) | Class 8.8 | Plain | M8-1.25 x 8 1.25 x 30 | 8-1.25x8-1.25x30 stud gr8.8 heat treated plain 10/box | 13 |
|
| Weaver | WA | Fully Threaded Stud (All Thread) | Class 8.8 | Plain | M12-1.75 x 12 1.75 x 25 | 12-1.75x12-1.75x25 stud gr8.8 heat treated plain 5/bx | 41 |
|
| Weaver | WA | Fully Threaded Stud (All Thread) | Class 8.8 | Plain | M10-1.50 x 10 1.5 x 30 | 10-1.5x10-1.5x30 stud gr8.8 heat treated plain 10/box | 23 |
|
| RePneu To | MI | Threaded Rod | Steel | Plain | rod seal/wiper | 22 |
| |
| RePneu To | MI | Fully Threaded Stud (All Thread) | Steel | Plain | offset low-profile m8 stud mount tie 7.5 tie 50lb tensile strength pa66hirhs | 1500 |
| |
| RePneu To | MI | Threaded Rod | Steel | Zinc/Clear | M12-1.75 x 1 | M12-1.75x1 m metric thread rod zinc cr+3 | 1 |
|
| RePneu To | MI | Threaded Rod | Steel | Zinc/Clear | M16-2.00 x 1 | M16-2.00x1 m metric thread rod zinc cr+3 | 1 |
|
| RePneu To | MI | Threaded Rod | Steel | Zinc/Clear | M20-2.50 x 1 | M20-2.50x1 m metric thread rod zinc cr+3 | 1 |
|
| RePneu To | MI | Threaded Rod | Steel | Plain | nose rod | 9 |
| |
| RePneu To | MI | Threaded Rod | Steel | Plain | 20 | motor rod xtn20 | 9 |
|
| RePneu To | MI | Threaded Rod | Grade A | Zinc/Clear | 1/2-13 x 10 | 1/2-13x10 unc a307 grade a all thread rods zinc cr+3 | 64 |
|
| RePneu To | MI | Fully Threaded Stud (All Thread) | Steel | Plain | southco stud | 40 |
| |
| RePneu To | MI | Threaded Rod | 316, 317, A4 Stainless | Plain | M12-1.75 x 3 | M12-1.75x3 m all thread rod coarse stainless a4 (316) | 4 |
|
| RePneu To | MI | Fully Threaded Stud (All Thread) | Steel | Plain | stud | 1 |
| |
| RePneu To | MI | Fully Threaded Stud (All Thread) | Steel | Plain | stud | 1 |
| |
| RePneu To | MI | Threaded Rod | Steel | Plain | rod seal case | 4 |
| |
| RePneu To | MI | Threaded Rod | Steel | Plain | rod seal case | 1 |
| |
| RePneu To | MI | Threaded Rod | Steel | Plain | rdd rod seal | 5 |
| |
| OneMonroe | MI | Self-Clinching Stud | Steel | Zinc/Clear | pem alternative captive captive part -chm5-12 self-clinching stud crs zinc thread-m5x0.8/length-12mm | 14326 |
| |
| OneMonroe | WI | Threaded Rod (Acme Thread) | Steel | Plain | esm/rsm-acme rod hardware kit | 329 |
| |
| Jackson | MS | Threaded Rod | Grade B7 | Plain | 1 1/2-8 x 6 nc b7 rod plain | 1 |
| |
| Jackson | MS | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 1 1/8-7 nc national coarse x 7 oal astm-a193-b7 fully threaded stud plain | 1 |
| |
| Weaver | WA | Threaded Rod | 316, 317, A4 Stainless | Plain | 3 |
| ||
| Jackson | MS | Threaded Rod | Grade B7 | Plain | 1-14 x 6 feet fine b7 rod plain | 1 |
| |
| TownCountry | AR | Threaded Rod | Steel | Plain | M5-0.80 x 1 | M05-0.8x1 meter threaded rod plain | 36 |
|
| TownCountry | AR | Threaded Rod | Grade B7 | Zinc/Yellow | 3/8-16 x 3 threaded rod b7 yellow zinc | 20 |
| |
| Jackson | MS | Double End Stud | Class 12.9 | Plain | stud 12.9 double end cut thread m16x2.00 pitchx270 mm 30 mm threadx45 mm thread on the square drive end square drive | 3 |
| |
| Jackson | MS | Threaded Rod | Grade B7 | Plain | 5/8-18 x 6 | 5/8-18 nf x 6 oal b7 stud plain (cut from atr) | 28 |
|
| TownCountry | AR | Threaded Rod | Steel | Zinc/Clear | 3/8-24 x 3 | 3/8-24 x 3 threaded rod zinc | 9 |
|
| TownCountry | AR | Threaded Rod | Grade B7 | Zinc/Yellow | 3/4-10 x 3 | 3/4-10 x 3 threaded rod b7 yellow zinc | 4 |
|
| TownCountry | AR | Resistance/Projection Weld Stud | Steel | Copper Plated | 3/8-16 x 3/4 | 3/8-16 x 3/4 weld stud copper plated | 100 |
|
| Jackson | MS | Threaded Rod | Grade B7 | Plain | 5/8-11 x 14 | 5/8-11 x 14 b7 stud plain cut/chamfered from atr not stamped | 16 |
|
| Jackson | MS | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 3/8-8 x 9 3/4 | 1 3/8-8 x 9 3/4 oal e/e astm-a193 b7 fully threaded stud plain finish | 46 |
|
| MAINSOURC | NH | Threaded Rod | Steel | Zinc/Clear | M5-0.80 | m5-.8 allthread rod plated | 46 |
|
| OneMonroe | MA | Self-Clinching Stud | Steel | Zinc/Clear | #6-32 x 1/2 | fh-632-8zc stud steel flush head #6-32 x .500 (zc) | 63 |
|
| OneMonroe | MA | Self-Clinching Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M5 x 35 | stud ss flush head metric m5 x 35mm | 101 |
|
| OneMonroe | MA | Threaded Rod | Steel | Plain | 1/2-13 x 6 | 1/2-13 x 6 threaded rod-plain | 10 |
|
| OneMonroe | MA | Resistance/Projection Weld Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 1/2 | 6-32 x 1/2 3 proj screw (bottom)-stainless steel | 1000 |
|
| OneMonroe | MA | Resistance/Projection Weld Stud | Steel | Plain | #8-32 x 5/16 | 8-32 x 5/16 3 proj screw (bottom) stl plain | 450 |
|
| OneMonroe | MA | Resistance/Projection Weld Stud | Steel | Plain | #10-32 x 3/8 | 10-32 x 3/8 3 proj screw (top) steel plain | 400 |
|
| OneMonroe | MA | Resistance/Projection Weld Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 3/8 | 6-32 x 3/8 3 proj screw (top) ss | 50 |
|
| OneMonroe | NC | Fully Threaded Stud (All Thread) | Steel | Zinc/Clear | M14-2.0-2.00 x 120 | m14-2.0 x 120m full thread stud plated | 10 |
|
| OneMonroe | NC | Threaded Rod | Class 8.8 | Plain | M14-2.0-2.00 x 1 | m14-2.0 x 1 meter all thread gr 8.8 | 2 |
|
| OneMonroe | NC | Fully Threaded Stud (All Thread) | Steel | Zinc/Clear | M14-1.5-1.50 x 120 | m14-1.5 x 120m full thread stud plated | 10 |
|
| OneMonroe | NC | Threaded Rod | Steel | Plain | M16-2.0-2.00 x 1 | m16-2.0 x 1 meter allthread rod | 1 |
|
| OneMonroe | NC | Ball Stud, Ball Pin | Steel | Zinc/Clear | ball stud receptacle plated | 1065 |
| |
| OneMonroe | NC | Ball Stud, Ball Pin | Steel | Zinc/Clear | #6-32 | 6-32 female thread ball stud plated | 750 |
|
| OneMonroe | NC | Self-Clinching Stud | Steel | Zinc/Clear | #10-32 x 1/2 | 10-32 x 1/2 flush head stud steel zinc | 1000 |
|
| OneMonroe | NC | Self-Clinching Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 1/2 | 10-32 x 1/2 flush head stud stainless steel | 500 |
|
| OneMonroe | NC | Self-Clinching Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 3/4 | 6-32 x 3/4 flush head stud stainless steel | 1000 |
|
| OneMonroe | NC | Self-Clinching Stud | Steel | Plain | pemref fh-256-8zi self clinching studs | 2000 |
| |
| OneMonroe | NC | Self-Clinching Stud | Steel | Plain | pemref fh-440-10zi self clinching studs | 60 |
| |
| OneMonroe | NC | Self-Clinching Stud | Steel | Plain | pemref fhs-632-20 self clinching studs | 100 |
| |
| OneMonroe | NC | Self-Clinching Stud | Steel | Plain | pemref fhs-632-4 self clinching studs | 1000 |
| |
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
