| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| MESAFAST | CA | Heavy Hex Nut | ASTM A563 Grade DH | Galvanized | 1/2-13 | 1/2-13 dh a563 heavy hex nut steel galvanized domestic | 320.0 |
|
| Endries | WI | Hex Jam Nut | Steel | Zinc/Clear | 1/2-13 | 1/2-13 jam center locknut zinc leach back 600 hour to red | 4128 |
|
| Endries | WI | Coupling Nut | Steel | Plain | 1/2-13 x 5/8 x 4 | 1/2-13 x 4 rod coupler 7/8 af plain | 91 |
|
| Endries | WI | Finished Hex Nut | Grade 5 | Phosphate | 1/2-13 | 1/2-13 grade 5 hex nut phosphate and oil | 21325 |
|
| Endries | WI | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Black Oxide | 1/2 | dcs-1227-po 1/2 wide type-u speed clip matte black .055/.075 panel thickness barb on each leg | 31400 |
|
| Endries | WI | Hex Jam Nut | Steel | Cadmium/Yellow | 1/2-20 | an316-8r 1/2-20 hex nut cadmium | 100 |
|
| Endries | WI | Lock Nut, Nylon Insert | Steel | Zinc/Clear | 1/2-13 | 1/2-13 ne series nylon insert locknut hex chromium free 96 hr salt spray zinc | 300 |
|
| Endries | WI | Weld Nut | Steel | Zinc/Yellow | 1/2-13 | 1/2-13 hex 3 projection long pilot weld nut yellow zinc | 9850 |
|
| Endries | WI | Lock Nut, Nylon Insert | Steel | Zinc/Black | 1/2-13 | 1/2-13 ne series nylon insert locknut black zinc | 350 |
|
| Endries | WI | Lock Nut with Tooth L/W (K-Lock, Keps, etc.) | Steel | Zinc/Clear | 1/2-13 | 1/2-13 conical keps nut 1-1/4 outside diameter washer trivalent clear zinc | 750 |
|
| Cal Fastenrs | CA | Weld Nut | Steel | Plain | 1/2-13 | square piloted 4 proj. weld nut | 283 |
|
| Cal Fastenrs | CA | Lock Nut, Nylon Insert | Steel | Zinc/Clear | 1/2-20 | 1/2-20 hex nylok nut low profile Cr3+ | 850 |
|
| Endries | WI | Flange Nut, Non-locking | Steel | Zinc/Clear | 1/2-13 | 1/2-13 hex flange nut zinc | 1017 |
|
| Endries | WI | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 | 1/2-13 ne series 18-8 stainless steel nylon insert locknut | 480 |
|
| Endries | WI | Lock Nut, Center Locking, All Metal (2-Way Reversible) | Grade 5 | Zinc/Clear | 1/2-20 | 1/2-20 grade 5 center locknut 2-way trivalent clear zinc and wax no china | 1997 |
|
| Endries | WI | Lock Nut, Flange, w/o serrations | Grade G | Plain | 1/2-13 | 50crfcg 1/2-13 grade g flange center locknut plain | 51280 |
|
| Endries | WI | Finished Hex Nut | Grade 5 | Zinc/Clear | 1/2-13 | 1/2-13 grade 5 hex nut tri clr zinc 120 wh/144 red rust | 9050 |
|
| Endries | WI | Finished Hex Nut | Steel | Zinc/Clear | 1/2-13 | 1/2-13 finished hex full nut trivalent clear zinc approved duplicate part item mast | 93 |
|
| XL Screw | GA | Finished Hex Nut | Steel | Plain | 1/2-20 | fin hex nuts | 1,200 |
|
| XL Screw | GA | Finished Hex Nut | Steel | Plain | 1/2-13 | fin hex nuts | 1,200 |
|
| XL Screw | GA | Finished Hex Nut | Steel | Zinc/Clear | 1/2-13 | fin hex nuts zp | 1,200 |
|
| XL Screw | GA | Finished Hex Nut | Steel | Zinc/Clear | 1/2-20 | fin hex nuts zp | 1,200 |
|
| XL Screw | GA | Finished Hex Nut | Steel | Galvanized | 1/2-13 .018 o.s. | fin hex nuts hdg | 1,200 |
|
| XL Screw | GA | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | 1/2-13 | fin hex nuts 18-8 ss pass | 1,200 |
|
| XL Screw | GA | Finished Hex Nut | Grade 5 | Plain | 1/2-13 | fin hex nuts SAE j995 | 1,200 |
|
| XL Screw | GA | Finished Hex Nut | Grade 5 | Plain | 1/2-20 | fin hex nuts SAE j995 | 1,200 |
|
| XL Screw | GA | Finished Hex Nut | Grade 5 | Zinc/Clear | 1/2-13 | fin hex nuts zp SAE j995 | 1,200 |
|
| XL Screw | GA | Finished Hex Nut | Grade 5 | Zinc/Clear | 1/2-20 | fin hex nuts zp SAE j995 | 1,200 |
|
| XL Screw | GA | Finished Hex Nut | Grade 8 | Plain | 1/2-13 | gr 8 fin hex nuts SAE j995 | 1,200 |
|
| XL Screw | GA | Finished Hex Nut | Grade 8 | Plain | 1/2-20 | gr 8 fin hex nuts SAE j995 | 1,200 |
|
| XL Screw | GA | Finished Hex Nut | Grade 8 | Zinc/Yellow | 1/2-20 | gr 8 fin hex nuts zyd SAE j995 | 1,200 |
|
| XL Screw | GA | Finished Hex Nut | Grade 8 | Zinc/Yellow | 1/2-13 | gr 8 fin hex nuts zyd SAE j995 | 1,200 |
|
| XL Screw | GA | Finished Hex Nut | Steel | Zinc/Clear | 1/2-13 x 7/16t | l.h. hex nuts | 800 |
|
| XL Screw | GA | Hex Jam Nut | Steel | Plain | 1/2-20 | fin hex jam nuts | 1,800 |
|
| XL Screw | GA | Hex Jam Nut | Steel | Plain | 1/2-13 | fin hex jam nuts | 1,800 |
|
| XL Screw | GA | Hex Jam Nut | Steel | Zinc/Clear | 1/2-13 | fin hex jam nuts zp | 1,800 |
|
| XL Screw | GA | Hex Jam Nut | Steel | Zinc/Clear | 1/2-20 | fin hex jam nuts zp | 1,800 |
|
| XL Screw | GA | Hex Jam Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | 1/2-13 | fin hex jam nuts 18-8ss pass | 1,800 |
|
| Exim | S'pore | Finished Hex Nut | Steel | Zinc/Clear | 1/2-130.866 x 03/4 x 0.438 | nuthex steel blue trivalent unc 1/2-130.866 x 0.750 x 0.438 in. b18.2.2 | 467 |
|
| MTP | CA | Hex Jam Nut | Grade 5 | Plain | 1/2-20 | 1/2-20 gr.5 st/zn hex jam nuts (l.h.) a bb 100 fb 200 qk 1000 | 3,340 |
|
| MTP | CA | Hex Jam Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-20 | 1/2-20 18-8 s.s hex jam nuts (l.h.) | stock |
|
| IPC | VA | Hex Jam Nut | Steel | Zinc/Clear | 1/2-13 | 1/2-13 hex jam nuts steel cr3 zinc-rohs must be rohs compliant | 7,500 |
|
| IPC | VA | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 | 1/2-13 elastic stop nut ne 18-8 s/s steel | 3,233 |
|
| IPC | VA | Finished Hex Nut | Steel | Galvanized | 1/2-13 | 1/2-13 finished hex nut steel hot dip galvanized | 657 |
|
| IPC | VA | Lock Nut with Tooth L/W (K-Lock, Keps, etc.) | Steel | Zinc/Clear | 1/2 x 5 1/2 | 1/2x5 1/2 wedge anchors steel zinc with nuts & washers | 450 |
|
| IPC | VA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade B | Cadmium | 1/2-13 | 1/2-13 stover nut steel grade b cad pltd cad plate per qq-p-416 rev c type-1 cl 3 | 714 |
|
| IPC | VA | Heavy Hex Nut | Grade A | Plain | 1/2-13 | 1/2-13 finished hex nut a563 grade a steel | 126,234 |
|
| General F | MI | Finished Hex Nut | Grade 5 | Zinc/Black | 1/2-13 | 1/2-13 finished hex nut gr.5-.0002 min.zinc & black dich. plated | 1700 |
|
| Kanebridge | IL | Coupling Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 x 1 1/4 | 1/2-13x1 1/4 hex rod coupling nut 5/8 inch across flats 18-8 stainless steel | 2.500 |
|
| Kanebridge | IL | Coupling Nut | Grade 5 | Zinc/Clear | 1/2-13 x 1 3/4 | 1/2-13x1 3/4 hex rod coupling nut 3/4 inch across flats grade 5 zinc | 5.625 |
|
| Kanebridge | IL | Coupling Nut | Steel | Zinc/Clear | 1/2-13 x 1 1/4 | 1/2-13x1 1/4 reduced hex rod coupling nut, 3/8-16, 5/8 across flats zinc | 3.750 |
|
| Kanebridge | IL | Finished Hex Nut | Grade 9 | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | 1/2-13 | 1/2-13 coarse thread thick hex nut grade 9 dfar ecoguard gray/silver 1,000 hr cor | 18.750 |
|
| Kanebridge | IL | Finished Hex Nut | Steel | Zinc/Clear | 1/2-13 | 1/2-13 left hand threaded hex nut zinc | 12.500 |
|
| Kanebridge | IL | Castle Nut (Hex) | Grade 5 | Zinc/Clear | 1/2-20 | 1/2-20 castle nut grade 5 zinc | 3.750 |
|
| Kanebridge | IL | Heavy Hex Nut | Steel | Black Oxide | 1/2-13 | 1/2-13 heavy hex nut black oxide | 20,000 |
|
| Kanebridge | IL | Hex Jam Nut | Grade 8 | Zinc/Yellow | 1/2-20 | 1/2-20 hex jam nut grade 8 zinc yellow | 30,000 |
|
| Kanebridge | IL | Slotted Hex Nut | Steel | Plain | 1/2-13 | 1/2-13 slotted heavy hex nut plain | 12.500 |
|
| Kanebridge | IL | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | Grade 5 | Zinc/Yellow | 1/2-13 | 1/2-13 serrated flange hex lock nuts grade 5 zinc yellow | 6.250 |
|
| Kanebridge | IL | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 | 1/2-13 serrated flange hex lock nuts 18-8 stainless steel | 6.250 |
|
| Kanebridge | IL | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | Grade 8 | Plain | 1/2-13 | 1/2-13 serrated flange hex lock nuts grade 8 black phosphate | 6.250 |
|
| Kanebridge | IL | Lock Nut, Nylon Insert | Grade 5 | Zinc/Clear | 1/2-13 | 1/2-13 nylon insert hex locknut ne light hex standard height grade 5 zinc | 15,000 |
|
| Kanebridge | IL | Lock Nut, Flange, w/o serrations | Grade G | Zinc/Yellow | 1/2-13 | 1/2-13 regular flange top lock hex nut grade g zinc yellow | 15,000 |
|
| Kanebridge | IL | Heavy Hex Nut | Steel | Cadmium | 1/2-13 | 1/2-13 flex type hex lock nut full height heavy hex cadmium and wax | 5,000 |
|
| Kanebridge | IL | Heavy Hex Nut | Steel | Cadmium | 1/2-13 | 1/2-13 flex type hex lock nut thin height heavy hex cadmium and wax | 5,000 |
|
| Kanebridge | IL | Lock Nut, Flange, w/o serrations | Steel | Zinc/Clear | 1/2-13 | 1/2-13 non serrated regular flange center locknut grade f zinc | 18.750 |
|
| General F | MI | Lock Nut, Nylon Insert | Grade B | Phosphate | 1/2-13 | 1/2-13 nyl ins ln gr b phos & oil b18.2.2 | 16200 |
|
| General F | MI | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade C | Plain | 1/2-13 | 1/2-13 cone top hex locknut gr.c b18.2.2 | 3300 |
|
| General F | MI | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Cadmium | 1/2-13 | 1/2-13 hvy hex flex ln cad b18.2.2 | 216 |
|
| General F | MI | Square Nut | Grade 2 | Plain | 1/2-13 | 1/2-13 hvy sq nut gr 2 b18.2.2 | 1241 |
|
| General F | MI | Lock Nut, Nylon Insert | Grade 8 | Zinc/Clear | 1/2-20 | 1/2-20 nyl ins ln gr 8 zn b18.2.2 | 1575 |
|
| General F | MI | Wing Nut | Steel | Plain | 1/2-13 | 1/2-13 cold frgd stl wing nut b18.2.2 | 179 |
|
| General F | MI | Lock Nut, Nylon Insert | Steel | Zinc/Yellow | 1/2-13 | 1/2-13 hvy hex nyl ins nut zidi | 217 |
|
| Perigee | MI | Finished Hex Nut | Steel | Plain | 1/2-13 x 3/4 x 7/16 | 1/2-13 x 3/4 x 7/16 fin full hex nut lh thread b18.2.2 | 144 |
|
| Perigee | MI | Finished Hex Nut | Steel | Zinc/Clear | 1/2-20 x 11/16 x 1/4 | 1/2-20 x 11/16 x 1/4 special hex nut b18.2.2 | 200 |
|
| Perigee | MI | Finished Hex Nut | Steel | Zinc/Clear | 1/2-20 x 11/16 x 1/4 | 1/2-20 x 11/16 x 1/4 special hex nut b18.2.2 | 403 |
|
| Perigee | MI | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Zinc/Clear | 1/2-13 x 3/4 x 7/16 | 1/2-13 x 3/4 x 7/16 huglock b18.2.2 | 26 |
|
| Perigee | MI | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Zinc/Clear | 1/2-13 x 3/4 x 7/16 | 1/2-13 x 3/4 x 7/16 huglock b18.2.2 | 371 |
|
| Perigee | MI | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Zinc/Clear | 1/2-13 x 3/4 x 7/16 | 1/2-13 x 3/4 x 7/16 huglock b18.2.2 | 50 |
|
| Perigee | MI | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Zinc/Clear | 1/2-13 x 3/4 x 7/16 | 1/2-13 x 3/4 x 7/16 huglock b18.2.2 | 50 |
|
| Perigee | MI | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Zinc/Clear | 1/2-13 x 3/4 x 7/16 | 1/2-13 x 3/4 x 7/16 huglock b18.2.2 | 33 |
|
| Perigee | MI | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Zinc/Clear | 1/2-13 x 3/4 x 7/16 | 1/2-13 x 3/4 x 7/16 huglock b18.2.2 | 30 |
|
| Perigee | MI | Castle Nut (Hex) | Grade 5 | Zinc/Yellow | 1/2-20 x 3/4 x 9/16 | 1/2-20 x 3/4 x 9/16 hex castle nut b18.2.2 | 159 |
|
| Perigee | MI | Castle Nut (Hex) | Grade 5 | Zinc/Yellow | 1/2-20 x 3/4 x 9/16 | 1/2-20 x 3/4 x 9/16 hex castle nut b18.2.2 | 115 |
|
| Perigee | MI | Castle Nut (Hex) | Grade 5 | Zinc/Clear | 1/2-20 x 3/4 x 9/16 | 1/2-20 x 3/4 x 9/16 hex castle nut b18.2.2 | 100 |
|
| Perigee | MI | Castle Nut (Hex) | Grade 5 | Zinc/Yellow | 1/2-20 x 3/4 x 9/16 | 1/2-20 x 3/4 x 9/16 hex castle nut b18.2.2 | 13 |
|
| Perigee | MI | Finished Hex Nut | Brass | Plain | 1/2-13 x 7/8 x 19/64 | 1/2-13 x 7/8 x 19/64 hex nut b18.2.2 | 602 |
|
| Perigee | MI | Finished Hex Nut | Brass | Plain | 1/2-13 x 7/8 x 19/64 | 1/2-13 x 7/8 x 19/64 hex nut b18.2.2 | 1902 |
|
| Perigee | MI | Cap Nut (Acorn Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | 1/2-20 x 3/4 x 1 1/32 | 1/2-20 x 3/4 x 1-1/32 high crown hex cap nut b18.2.2 | 163 |
|
| Perigee | MI | Cap Nut (Acorn Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | 1/2-20 x 3/4 x 13/16 | 1/2-20 x 3/4 x 13/16 low crown hex cap nut b18.2.2 | 481 |
|
| Perigee | MI | Finished Hex Nut | Steel | Zinc/Clear | 1/2-20 x 5/8 x 5/32 | 1/2-20 x 5/8 x 5/32 scsco hex mounting nut b18.2.2 | 75 |
|
| Perigee | MI | Finished Hex Nut | Steel | Cadmium | 1/2-20 x 3/4 x 1/4 | 1/2-13 x 3/4 x 7/16 hex check nut b18.2.2 | 39 |
|
| Perigee | MI | Castle Nut (Hex) | Steel | Cadmium/Yellow | 1/2-20 | 1/2-20 x 3/4 x 9/16 castellated airframe nut b18.2.2 | 400 |
|
| MTP | CA | Finished Hex Nut | Grade 5 | Zinc/Clear | 1/2-20 | 1/2-20 gr.5 zn finished hex nuts fine | 503 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.

