FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| NAPPCO | TX | vlier ep308b VLI-EP308B | 16 |
| ||||
| Century | FL | nssr-0075-l3 smalley nssr0075l3 | 5260 |
| ||||
| Century | FL | p50-386-000 rev.a pol2601-04 green double bag 100 pcs per | 39 |
| ||||
| Century | FL | Cable Clamps & Ties | panduit prt4h-l0 | 40 |
| |||
| Century | FL | Quick Access Panel Fasteners (1/4 Turn etc.) | pem ptl2-04-4cn | 45 |
| |||
| Century | FL | Service & Repair Kits | lund ff kit# rx109hka | 20 |
| |||
| Century | FL | Service & Repair Kits | lund ff kit# rx106pl | 20 |
| |||
| Century | FL | Service & Repair Kits | rx315hk hardware kit | 20 |
| |||
| Century | FL | Hook & Loop Products (Velcro, Teccro, etc.) | 75 | s-12723 velcro 75 ft roll u-line | 1 |
| ||
| Century | FL | s-6660 4 x 5 self seal static u-line (SHIELDING BAGS) (SHIELDING BAGS) | 2403 |
| ||||
| Century | FL | Finished Hex Nut | Steel | Plain | sl7628-102 nut plain round | 33 |
| |
| Century | FL | External Push-On Shaft Retainer | Steel | Plain | 1/2 | roto-clip sh-50-stpa 1/2 shaft ext ret ring (M/C#97622A200 (ROHS COMPLIANT)) (M/C#97622A200 (ROHS COMPLIANT)) | 1000 |
|
| Century | FL | pem penn so-440-8zi | 90 |
| ||||
| Century | FL | Cable Clamps & Ties | pem pem # td-40-4zi | 15 |
| |||
| Century | FL | vh-62-s16 smalley smalley | 723 |
| ||||
| Century | FL | richco part # wita-175r-l | 2150 |
| ||||
| NAPPCO | TX | Blind Rivet | Aluminum | Plain | ad66abs pop rivet 5052 alum (4.5m bx qty | 58 |
| |
| NAPPCO | TX | Machine Screw | Steel | Plain | M4-0.70 x 20 | philpan m/s steelzp din7985 m4-0.7x20 | 258 |
|
| SWACO | OH | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | aehs10-12175-5.1 atlas insert | 3 |
| |||
| SWACO | OH | Set Screw (Socket Head) | Steel | Plain | 5 | 48028 atlas dispenser m3-m5 grub screw | 13 |
|
| SWACO | OH | 47962 atlas long motor protection riv938p | 4 |
| ||||
| SWACO | OH | 4165100 atlas rubber base | 9 |
| ||||
| SWACO | OH | 4412100 atlas tool | 10 |
| ||||
| SWACO | OH | 4371800 atlas tool | 1 |
| ||||
| SWACO | OH | Spring-Loaded Plunger Pin, Pop Pin | Steel | Plain | sml-m4 m4 extdd stubby plungerss nose | 190 |
| |
| SWACO | OH | a00-051 barry mount | 236 |
| ||||
| SWACO | OH | r18733-6 barry mount | 45 |
| ||||
| SWACO | OH | e22-02-50-r rohs barry mount | 25 |
| ||||
| SWACO | OH | Swage Sleeves, Crimp Sleeves | Steel | Plain | AA710-27 aa710-27 | 50 |
| |
| SWACO | OH | aa-618-1 | 104 |
| ||||
| SWACO | OH | Conical Disc Spring Washer, Disc Spring, Belleville Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | .125 x .250 x .013 | .125x.250x.013 belleville washer 301ss | 250 |
|
| SWACO | OH | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M4-0.70 x 8 | M4-0.7x8 flange bhcs a2 ss flat din 7380 | 2050 |
|
| SWACO | OH | Carriage Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 x 1 1/4 | 1/2-13x1 1/4 crg bolt 18-8 | 4051 |
|
| SWACO | OH | go-br2 lithium-ion cordless rivet tool-demo tool | 1 |
| ||||
| SWACO | OH | Press-In/Ultrasonic Insert for Plastic (E-Z Lok etc.) | 6041-4br500 dodge ultrasert ii | 1000 |
| |||
| SWACO | OH | Press-In/Ultrasonic Insert for Plastic (E-Z Lok etc.) | 6075-2.2br029 dodge ultrsrt ii | 7666 |
| |||
| SWACO | OH | Press-In/Ultrasonic Insert for Plastic (E-Z Lok etc.) | 6041-5br562 dodge ultrsrt ii | 3980 |
| |||
| SWACO | OH | Dowel Pin | 316, 317, A4 Stainless | Plain | 3/16 x 3/8 | 3/16x3/8 dowel pins a4 (316) | 50 |
|
| Ford | NJ | Self-Tapping Self-Drilling Screw (Tek etc.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | #8 x 1 1/4 | #8 x 1 1/4 self drilling screw phillips pan 410 |
| |
| Ford | NJ | Self-Tapping Self-Drilling Screw (Tek etc.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | #14 x 2 1/2 | #14 x 2 1/2 self drilling screw phillips flat 410 | 480 |
|
| Ababa | CA | Flat Washer | Steel | Plain | .251 x .375 x .032 | stripper washer (shortening shim) | 8,000 |
|
| Lubker Di | PA | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 5/16-18 x 5 1/4 | 5/16-18 x 5 1/4 hhcs gr 5 zinc | 12250 |
|
| Lubker Di | PA | Socket Head Cap Screw | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | 1/4-28 x 1 1/4 | 1/4-28 x 1 1/4 soc c/s a286 high tensile | 6000 |
|
| Lubker Di | PA | Hex Head Cap Screw | Grade 5 | Zinc/Yellow | 3/8-16 x 1 | 3/8-16 x 1 hhcs gr 5 zp yell w/ yellow nylon patch | 11000 |
|
| Lubker Di | PA | Sems Machine Screw | Steel | Zinc/Clear | #5-40 x 5/8 | #5-40 x 5/8 phil pan sems with split l/w zp (rohs compliant) | 55000 |
|
| Lubker Di | PA | Carriage Bolt | Steel | Zinc/Black | 1/4-20 x 3/4 | 1/4-20 x 3/4 cge bolt zinc & black .0003 min trivalent per astm b633 ty ii fe/zn 8 (cr3+) and glossy topcoat (rohs compliant) | 60000 |
|
| Lubker Di | PA | Carriage Bolt | Grade 5 | Zinc/Black | 1/4-20 x 3/4 | 1/4-20 x 3/4 cge bolt (ft) gr 5 .0003 min thk zinc & black trivalent per astm b633 type ii fe/zn 8 (cr3+) and glossy topcoat | 250000 |
|
| Lubker Di | PA | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | 3/8-16 x 1 | 3/8-16 x 1 flat socket cap screw 304 s/s (country restrictions with mtr cert) | 4000 |
|
| Lubker Di | PA | Quick Release Pin, Spring-Loaded Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4 x 3 (Effective lgth) | 1/4 x 3 (eff lgth) detent quick release pin 303 s/s (model c) | 2500 |
|
| Lubker Di | PA | Socket Head Cap Screw | Ni-Cu Alloy (Monel, K-Monel, etc.) | Passivated | 5/16-18 x 3/4 | 5/16-18 unc-3a x 3/4 soc hd c/s mil-dtl-1222j, gr 500, qq-n-286g, self-lkg per mil-dtl-18240f type p, 6 dots stamped on hd eq spaced (usa) | 144 |
|
| Lubker Di | PA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | #6-32 x 1/4 | #6(six)-32 x 1/4 combo phil/slot rd hd m/s 18.8 s/s black ox (dry to the touch) | 33000 |
|
| Global | CA | Machine Screw | Brass | Tin Plated | #10-32 x 1.435 | 10-32 x 1.435 pozi pan machine screw brass electro tin plate per drawing # 68345-4 per drawing # 68345-4 | 9,242 |
|
| Global | CA | Insulators | d39803034 170 x 105 msr 24v psu insulator gs-17 material (statex 18) gs-17 material (statex 18) | 1 |
| |||
| Global | CA | Round Spacer | Plastic | Plain | 13rs100032 microplastics spacer 1 rndx1/4 lx1/2 id ny | 53 |
| |
| Global | CA | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | 66453-3 rev. j 4-24 x 1.320 phil pan t/s hi-lo steel zinc iii clear rohs head dia .193/.180 head height .071/.062 steel zinc iii clear rohs head dia .193/.180 head height .071/.062 | 490 |
| |
| Global | CA | Panel Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | 3/4-32 | 3/4-32 hex panel nut 18-8 ss passivate 7/8 af x 1/8 thickness 303 ss dfar 7/8 af x 1/8 thickness 303 ss dfar | 403 |
|
| Global | CA | Hex Male/Female Standoff | Nylon (Polyamide) | Plain | nas1829h4d08 m/f hex standoff military 1/4 af x 1/2 l x 6-32 m thd x 4-40 f thd nylon 1/4 af x 1/2 l x 6-32 m thd x 4-40 f thd nylon | 22 |
| |
| Global | CA | Hex Male/Female Standoff | Nylon (Polyamide) | Plain | nas1829h4d14 m/f hex standoff military 1/4 af x 7/8 l x 6-32 m thd x 4-40 f thd nylon 1/4 af x 7/8 l x 6-32 m thd x 4-40 f thd nylon | 42 |
| |
| Global | CA | Round Spacer | Plastic | Plain | 13rs075037 microplastics spacer 3/4 rndx3/8 lx1/4 (0.257) id ny | 1,000 |
| |
| Global | CA | Captive Panel Screw | Plastic | Plain | 7/16 x 9/16 | 27rt187550 microplastics ratchet fastener ny flat 7/16 hdx9/16 l ny flat 7/16 hdx9/16 l | 19,004 |
|
| Global | CA | Hex Male/Female Standoff | Aluminum | Plain | m/f standoff 3/16 hexx11/16 l 2-56 thd alum | 9,999 |
| |
| Global | CA | Carriage Bolt | Steel | Zinc/Clear | 3/8-16 x 4 1/2 | 3/8-16x4 1/2 carriage bolt steel zinc iii | 250 |
|
| Delta Secondary | IL | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Electrolytic Zinc Basecoat + Topcoats (Climacoat, Climaseal, etc.) | 1/2-20 x 1 1/4 | MAGNI 555 (per Ford S426) | 4100 |
|
| Ford | NJ | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Electrolytic Zinc Basecoat + Topcoats (Climacoat, Climaseal, etc.) | #10 x 1 1/2 | #10 x 1 1/2 self drilling screw steel hex washer 1000 hour salt pray coating epdm bonded sealing washer | 100000 |
|
| System 22 | PA | Hex Head Cap Screw | Duplex Stainless (2205, Ferralium etc.) | Plain | 3/8-16 x 1 1/4 | 2205 Duplex | 280 |
|
| Delta Secondary | IL | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | Plain | 5/32 | Short Arm Hex KeyWith Both Ends Drilled | 5000 |
|
| Delta Secondary | IL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 7/16 | slotted fillisterwith .059 dia hole across head | 1134 |
|
| Delta Secondary | IL | Set Screw (Socket Head) | Steel | Zinc/Yellow | #8-32 x 1/2 | Flat Point | 10600 |
|
| Delta Secondary | IL | Carriage Bolt | Grade 5 | Plain | 1/2-13 x 2 1/2 | Short Neck | 24489 |
|
| Delta Secondary | IL | Machine Screw | Steel | Zinc/Clear | #8-32 x 1 7/8 | phillips pan head | 390 |
|
| Delta Secondary | IL | Machine Screw | Steel | Zinc/Clear | 10-32 7/32 | Phillips Flat U/C | 2200 |
|
| Delta Secondary | IL | Carriage Bolt | Grade 5 | Zinc/Clear | 1/2-13 x 2 1/2 | Short Neck | 1085 |
|
| Delta Secondary | IL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 3/8 | (2) .062 dia holes drilled across head, .05 from top of head to c/l | 150 |
|
| Delta Secondary | IL | Machine Screw | Steel | Zinc/Clear | #10-32 x 7/16 | Phil Pan | 35200 |
|
| Delta Secondary | IL | Machine Screw | Steel | Phosphate | #10-24 x 7/16 | Phil PanPhos & Oil | 31780 |
|
| Delta Secondary | IL | Carriage Bolt | Grade 5 | Zinc/Yellow | 1/2-13 x 2 1/2 | Short Neck | 3051 |
|
| Delta Secondary | IL | Carriage Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Zinc/Yellow | 3/4-10 x 3 | 100 |
| |
| Delta Secondary | IL | Flange Screw w/o serr. (Frame Bolt) | Grade 8 | Phosphate | 1/2-20 x 6 1/2 | 2 Thread LengthFull Body | 2500 |
|
| Delta Secondary | IL | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | Plain | 1/8 | Short Arm Hex KeyWith Both Ends Drilled | 14000 |
|
| System 22 | PA | Hex Head Cap Screw | Duplex Stainless (2205, Ferralium etc.) | Plain | 1/4-20 x 1 | 2205 Duplex FULL THREAD | 136 |
|
| System 22 | PA | Hex Head Cap Screw | Duplex Stainless (2205, Ferralium etc.) | Plain | 7/16-14 x 2 | 2205 Duplex FULL THREAD | 42 |
|
| System 22 | PA | Hex Head Cap Screw | Duplex Stainless (2205, Ferralium etc.) | Plain | 1/2-13 x 1 1/4 | 2205 Duplex FULL THREAD | 147 |
|
| System 22 | PA | Hex Head Cap Screw | Duplex Stainless (2205, Ferralium etc.) | Plain | 1/2-13 x 1 1/2 | 2205 Duplex FULL THREAD | 115 |
|
| System 22 | PA | Hex Head Cap Screw | Duplex Stainless (2205, Ferralium etc.) | Plain | 1/2-13 x 1 3/4 | 2205 Duplex FULL THREAD | 174 |
|
| System 22 | PA | Hex Head Cap Screw | Duplex Stainless (2205, Ferralium etc.) | Plain | 1/2-13 x 2 | 2205 Duplex FULL THREAD | 968 |
|
| System 22 | PA | Hex Head Cap Screw | Duplex Stainless (2205, Ferralium etc.) | Plain | 1/4-20 x 1 1/4 | 2205 Duplex FULL THREAD | 135 |
|
| System 22 | PA | Hex Head Cap Screw | Duplex Stainless (2205, Ferralium etc.) | Plain | 1/2-13 x 2 1/4 | 2205 Duplex FULL THREAD | 107 |
|
| System 22 | PA | Hex Head Cap Screw | Duplex Stainless (2205, Ferralium etc.) | Plain | 1/2-13 x 2 1/2 | 2205 Duplex FULL THREAD | 25 |
|
| System 22 | PA | Hex Head Cap Screw | Duplex Stainless (2205, Ferralium etc.) | Plain | 1/2-13 x 3 | 2205 Duplex | 194 |
|
| System 22 | PA | Hex Head Cap Screw | Duplex Stainless (2205, Ferralium etc.) | Plain | 1/2-13 x 4 1/2 | 2205 Duplex FULL THREAD | 17 |
|
| System 22 | PA | Hex Head Cap Screw | Duplex Stainless (2205, Ferralium etc.) | Plain | 1/2-13 x 3 1/2 | 2205 Duplex FULL THREAD | 101 |
|
| System 22 | PA | Hex Head Cap Screw | Duplex Stainless (2205, Ferralium etc.) | Plain | 5/8-11 x 1 1/2 | 2205 Duplex FULL THREAD | 715 |
|
| System 22 | PA | Hex Head Cap Screw | Duplex Stainless (2205, Ferralium etc.) | Plain | 5/8-11 x 1 3/4 | 2205 Duplex FULL THREAD | 416 |
|
| System 22 | PA | Hex Head Cap Screw | Duplex Stainless (2205, Ferralium etc.) | Plain | 5/8-11 x 2 | 2205 Duplex FULL THREAD | 540 |
|
| System 22 | PA | Hex Head Cap Screw | Duplex Stainless (2205, Ferralium etc.) | Plain | 5/8-11 x 2 1/4 | 2205 Duplex FULL THREAD | 122 |
|
| System 22 | PA | Hex Head Cap Screw | Duplex Stainless (2205, Ferralium etc.) | Plain | 5/8-11 x 2 3/4 | 2205 Duplex FULL THREAD | 152 |
|
| System 22 | PA | Hex Head Cap Screw | Duplex Stainless (2205, Ferralium etc.) | Plain | 5/8-11 x 2 1/2 | 2205 Duplex FULL THREAD | 559 |
|
| System 22 | PA | Hex Head Cap Screw | Duplex Stainless (2205, Ferralium etc.) | Plain | 5/8-11 x 3 | 2205 Duplex FULL THREAD | 593 |
|
| System 22 | PA | Hex Head Cap Screw | Duplex Stainless (2205, Ferralium etc.) | Plain | 5/8-11 x 3 1/2 | 2205 Duplex FULL THREAD | 403 |
|
| ScrewsInc | OH | Lock Nut with Tooth L/W (K-Lock, Keps, etc.) | Steel | Zinc/Clear | #4-40 | hex mach scw keps nut | 1930 |
|
| ScrewsInc | OH | Self-Tapping Sheet Metal Screw (types a,b,ab) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | #6 x 1/2 | PHIL PAN TYPE A b18.6.4 | 1000 |
|
| FACCA | Ont | PEBBLE EMBOSSED SOFT-FOOT ANTI-FATIGUE FLOOR MAT SAFETY EDGE 3FT X 5FT X 1/4 VINYL BROWN | 17 |
| ||||
| FACCA | Ont | PEBBLE EMBOSSED SOFT-FOOT ANTI-FATIGUE FLOOR MAT SAFETY EDGE 3FT X 5FT X 1/4 VINYL GRAY | 14 |
| ||||
| FACCA | Ont | ANTI-FATIGUE FLOOR MATTING STANDARD EMBOSSED SAFETY EDGE 2FT X 3FT X 3/8 VINYL BROWN | 16 |
| ||||
| FACCA | Ont | ANTI-FATIGUE FLOOR MATTING STANDARD EMBOSSED SAFETY EDGE 2FT X 3FT X 3/8 VINYL GRAY | 3 |
| ||||
| FACCA | Ont | ANTI-FATIGUE FLOOR MATTING STANDARD EMBOSSED SAFETY EDGE 3FT X 12FT X 1/4 VINYL GRAY | 7 |
| ||||
| FACCA | Ont | ANTI-FATIGUE FLOOR MATTING STANDARD EMBOSSED SAFETY EDGE 3FT X 12FT X 3/8 VINYL GRAY COLOUR | 1 |
| ||||
| FACCA | Ont | PEBBLE EMBOSSED SOFT-FOOT ANTI-FATIGUE FLOOR MAT SAFETY EDGE 3FT X 12FT X 1/4 VINYL GRAY | 1 |
| ||||
| FACCA | Ont | PEBBLE EMBOSSED SOFT-FOOT ANTI-FATIGUE FLOOR MAT SAFETY EDGE 2FT X 3FT X 1/4 VINYL GRAY | 8 |
| ||||
| FACCA | Ont | SOFT FOOT ANTI-FATIGUE FLOOR MAT STANDARD EMBOSSING SAFETY EDGE 3FT X 5FT X 3/8 PVC VINYL SPONGE BROWN | 3 |
| ||||
| FACCA | Ont | WHITE HOLSTER FOR UNI-DRIVER #500 | 65 |
| ||||
| FACCA | Ont | ROLLING TOOL BOX-4 TRAYS-COLLAPSES DOWN TO 435MM HGT 590MM LONG X 345MM WIDE X 950MM HGT SHEET STEEL BLUE ENAMEL | 3 |
| ||||
| FACCA | Ont | WORK BENCH-BASIC 2000MM WD X 760MM DPTH X 845MM HT METAL/HARDWOOD | 2 |
| ||||
| FACCA | Ont | ROLLING TOOL BOX-4 DRAWER-DRAWERS PULL OUT EITHER SIDE 635MM LONG X 480MM WIDE X 1000MM HT SHEET STEEL BLUE ENAMEL | 1 |
| ||||
| FACCA | Ont | Plastic | Plain | TORX SELECTOR DISC FOR ACCURATELY DETERMINING TORX SIZES PLASTIC BLACK | 600 |
| ||
| FACCA | Ont | Protective Caps & Plugs | Brass | Plain | 5/8 | pronged plug button for 5/8 hole x .062/.078 panel brass plain | 50000 |
|
| FACCA | Ont | Drill Rod | Steel | Plain | M4.5 x 2 | drill rod round h9 tolerance 4.5mm dia x 2 metre length cv steel plain finish ground polished din 175/cv 4.5x2mtr | 97 |
|
| FACCA | Ont | Drill Rod | Steel | Plain | M2.5 x 2 | drill rod round h9 tolerance ground polished 2.5mm dia x 2mt length cv steel plain finish din 175/cv 2.5x2mtr | 498 |
|
| FACCA | Ont | Drill Rod | Steel | Plain | M35 x 1 | drill rod round 35mm dia x 1 metre lgth chrome vanadium plain finish din 175/cv 35x1mtr | 19 |
|
| FACCA | Ont | Drill Rod | Steel | Plain | M2 x 2 | drill rod round h9 tolerance 2mm dia x 2 m length cv steel plain finish ground polished din 175/cv 2x2mtr | 321 |
|
| FACCA | Ont | Drill Rod | Steel | Plain | M5 x 2 | drill rod round h9 tolerance 5mm dia x 2 metre length cv steel ground polished plain din 175/cv 5x2mtr | 413 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
