FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| NAPPCO | TX | Storage Bins | 7 3/8 | small blue inventory bin 7 3/8 length | 344 |
| ||
| NAPPCO | TX | Latches & Catches | 01-13-41 latch assembly | 1 |
| |||
| NAPPCO | TX | Latches & Catches | 01-13-25 flush recessed latch | 1 |
| |||
| NAPPCO | TX | Latches & Catches | 44-8-1-11/3 adjustable grip latches med | 10 |
| |||
| NAPPCO | TX | Latches & Catches | 44-99-119-41 adjustable grip latches | 90 |
| |||
| NAPPCO | TX | Knobs & Star Grips | Plastic | Plain | 44-99-120-41 plastic knob latch | 50 |
| |
| NAPPCO | TX | Latches & Catches | 44-99-223-41 adjustable key latch | 3 |
| |||
| NAPPCO | TX | Latches & Catches | 44-t-2 | 44-t-2 adjustable grip latches med | 1 |
| ||
| NAPPCO | TX | Springs (Compression) | spring compression #507286 | 10 |
| |||
| NAPPCO | TX | Latches & Catches | 5-81 | c5-81 sealed lever latch | 2 |
| ||
| NAPPCO | TX | Latches & Catches | push to close latch | 300 |
| |||
| NAPPCO | TX | Protective Caps & Plugs | Plastic | Black Oxide | 1 1/16 | caplug blk 1-1/16id rd sleeve cap CAPLUGSC-1-1/16BLK | 9201 |
|
| NAPPCO | TX | Latches & Catches | e5-2-135-111 quad panel latches | 1 |
| |||
| NAPPCO | TX | Latches & Catches | f7-535 flexible draw latch | 6 |
| |||
| NAPPCO | TX | Storage Bins | super size ivory inventory bin 18 lgth | 5 |
| |||
| NAPPCO | TX | Knobs & Star Grips | davies knob # 3081-a | 11 |
| |||
| NAPPCO | TX | Knobs & Star Grips | #10-24 x 1.25 | 10-24x1.25 femalelobedhandwheelknob | 10 |
| ||
| NAPPCO | TX | Latches & Catches | M1-11 | M1-11 flush simplicity latch | 42 |
| ||
| NAPPCO | TX | Latches & Catches | M1-12 | M1-12 flush simplicity latch | 46 |
| ||
| NAPPCO | TX | Latches & Catches | M1-14 | M1-14 flush simplicity latch | 20 |
| ||
| OneMonroe | NC | Hinges | #75-4420 | stanley#75-4420 hinge 2ea | 1 |
| ||
| OneMonroe | NC | Hinges | geared hinge | 2 |
| |||
| OneMonroe | NC | Hinges | geared hinge | 2 |
| |||
| OneMonroe | NC | Hinges | geared hinge | 1 |
| |||
| OneMonroe | NC | Hinges | geared hinge | 1 |
| |||
| OneMonroe | NC | Handles | pull handle silver | 14 |
| |||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | oakland cal caster-130202 | 18 |
| |||
| OneMonroe | NC | Hinges | hinge butt for the 5884 & 5885 | 9 |
| |||
| OneMonroe | NC | Hinges | 2 | 2 strap hinge | 27 |
| ||
| OneMonroe | NC | Gaskets | gasket for locking square d-ring | 49 |
| |||
| OneMonroe | NC | Protective Caps & Plugs | dust cover | 30 |
| |||
| OneMonroe | NC | Latches & Catches | catch | 2 |
| |||
| OneMonroe | NC | Latches & Catches | catch | 1 |
| |||
| OneMonroe | NC | Latches & Catches | catch | 119 |
| |||
| OneMonroe | NC | Latches & Catches | catch | 45 |
| |||
| OneMonroe | NC | Latches & Catches | slam action keylatch | 1 |
| |||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | 12 x 5 | 12 x 5 swivel casterl | 3 |
| ||
| OneMonroe | NC | Hinges | Brass | 3/8 x 72 | pin hinge 3/8 x 72 brass | 4 |
| |
| OneMonroe | NC | Hinges | 1 3/8 | 1-3/8 offset hinge | 31 |
| ||
| OneMonroe | NC | Handles | 300 Stainless (A1,A2, 18-8,304,310 etc.) | scratch brush stainless steel plywood handle | 3 |
| ||
| Global | CA | Latches & Catches | c7-10 southco draw latch 1.25 wx4.16 h | 2 |
| |||
| Century | FL | Springs (Compression) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | ci-012b-3ss stainless compression spring | 30 |
| ||
| Century | FL | Springs (Compression) | 2 | parker 3913582026 compression spring q2b | 25 |
| ||
| Century | FL | Grommets & Eyelets | alcoa 50s12-1-1aa grommet | 25 |
| |||
| Century | FL | Machine Mounts, Casters, Leg Levelers | Plain | 5/16-18 x 2 | 5/16-18x2 hank leveler black carpin# 045bo3120000kdlk | 82 |
| |
| Century | FL | O-Rings & Quad Ring Seals (X-Rings) | ms28782-43 ring | 87 |
| |||
| Century | FL | O-Rings & Quad Ring Seals (X-Rings) | ms29561-035 | 271 |
| |||
| Endries | WI | Latches & Catches | push to close latch flush style ul 94-vo material all-west | 688 |
| |||
| Endries | WI | Protective Caps & Plugs | bpf-1/4 red polyethylene flush button plug (caplugs) | 6000 |
| |||
| Endries | WI | Springs (Compression) | 1 1/4 x 8 | 9-2032-21 1-1/4x8in medium duty die spring blue | 11 |
| ||
| Endries | WI | Springs (Torsion) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 90 | spring torsion rhw 90 .124 od .014 dia ss | 28 |
| |
| Endries | WI | Hinges | .125 x 6 | .125x6ft piano hinge pin (by the piece) | 150 |
| ||
| Endries | WI | Protective Caps & Plugs | .234 x .47 | gc-5 .234x.47 red low-density polyethylene grease cap | 1528 |
| ||
| Endries | WI | Springs (Compression) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | .038 | lc-038d-12s .30x1.125x .038 stainless steel compression spring (lee spring only) | 2884 |
| |
| Endries | WI | Knobs & Star Grips | Plastic | Plain | 969848 1/4-20 x 1.57 | 969848 1/4-20x1.57 black thermo plastic 5-lobe knob (elesa only) | 561 |
|
| Endries | WI | Springs (Compression) | Plain | .457 x 1.59 x .063 | d12420 (or equivalent) .457x1.59x .063 music wire compression spring plain | 4805 |
| |
| Endries | WI | Protective Caps & Plugs | bsp-3/4 3/4 polypropylene thread plug yellow | 4000 |
| |||
| Endries | WI | Protective Caps & Plugs | Black Oxide | 2 1/2 | 62mp2500 2-1/2 black nylon locking hole plug | 300 |
| |
| Endries | WI | Grommets & Eyelets | 763 9/32 x 9/16 | 763 9/32x9/16 outside diameter grommet | 27500 |
| ||
| Endries | WI | Hinges | Plain | 2 1/2 x 1 11/16 | 2-1/2 x1-11/16 mortise hinge plain | 500 |
| |
| Endries | WI | Vibration/Shock Absorbing Mounts, Rubber Bumpers | Nylon (Polyamide) | M22 | 15478 22mm head 11mm stem nylon bumper fascia retainer 50/box | 55 |
| |
| Endries | WI | Protective Caps & Plugs | Plastic | Plain | 12 | cd-12 threaded plastic cap | 100 |
|
| Endries | WI | Hinges | Steel | Zinc/Clear | 2 | 16017 2in mpt hvyduty hinged fillister cap trivalent clear zinc | 320 |
|
| Endries | WI | Vibration/Shock Absorbing Mounts, Rubber Bumpers | Rubber, Buna-N, Neoprene etc. | Plain | M31.7 x 33.2 | 22001-13 31.7x33.2mm neoprene anti-vibration mount green and white (barry controls only) | 167 |
|
| Endries | WI | Springs (Compression) | 9-0806-21 1/2x1-1/2 medium duty die spring blue | 192 |
| |||
| Endries | WI | Gaskets | Steel | Zinc/Clear | .030 x .017 | gasket tubing .030 id x .017 wall sil 50 duro rohs | 2000 |
|
| Buckeye | OH | Grease Fittings | 1/8-27 | grease fitting 1/8-27 ptf | inquire |
| ||
| Buckeye | OH | Grease Fittings | grease fitiing 1/4-28 sae lt | inquire |
| |||
| Buckeye | OH | Grease Fittings | 1/4-28 | grease fitting 1/4-28 thread forming special taper thread | inquire |
| ||
| Buckeye | OH | Grease Fittings | 1/8-27 | grease fitting 1/8-27 ptf 45 degree | inquire |
| ||
| Buckeye | OH | Grease Fittings | < td>1/4-28 | grease fitting 1/4-28 sae lt 45 degree | inquire |
| ||
| Buckeye | OH | Brackets & Supports | 5/16-18 | 5/16-18 bracket | inquire |
| ||
| Buckeye | OH | Grease Fittings | Steel | Zinc/Clear | 90 | grease fitting 90 deg 1/4-28 taper thrd no ball check zinc clr | inquire |
|
| Buckeye | OH | Protective Caps & Plugs | Plastic | #10-24 | 10-24 die cast cap nut - washer base - open end | inquire |
| |
| Buckeye | OH | Grease Fittings | 1/4-28 | grease fitting 1/4-28 sae lt | inquire |
| ||
| Buckeye | OH | Protective Caps & Plugs | Plastic | 1/4-20 | 1/4-20 die cast cap nut-washer base-open end-3/8 across flats | inquire |
| |
| Buckeye | OH | Protective Caps & Plugs | Plastic | 5/16-18 | 5/16-18 die cast cap nut - large washer base - open end | inquire |
| |
| Buckeye | OH | Protective Caps & Plugs | Plastic | 1/4-20 | 1/4-20 die cast cap nut-washer base-open end-7/16 across flats | inquire |
| |
| Buckeye | OH | Protective Caps & Plugs | Plastic | Nickel Plated | 1/4-20 | 1/4-20 die cast cap nut - washer base - open end - nickel plated | inquire |
|
| Buckeye | OH | Protective Caps & Plugs | Plastic | #10-32 | 10-32 die cast cap nut - washer base - open end | inquire |
| |
| Buckeye | OH | Grease Fittings | Steel | Zinc/Yellow | 90 | grease fitting 90 deg 1/4-28 taper thrd no ball check zinc yello | inquire |
|
| Buckeye | OH | Grease Fittings | 1/8-27 | grease fitting 1/8-27 ptf | inquire |
| ||
| Buckeye | OH | Grease Fittings | 67.5 | 67.5 degree grease fitting per volvo print 60112821p01 | inquire |
| ||
| Buckeye | OH | Brackets & Supports | M4-0.70 | m4-0.7 metric right angle projection weld bracket | inquire |
| ||
| Buckeye | OH | Brackets & Supports | 300 Stainless (A1,A2, 18-8,304,310 etc.) | #10-32 | 10-32 stainless steel right angle weld bracket | inquire |
| |
| Buckeye | OH | Brackets & Supports | #8-32 | 8-32 right angle projection weld bracket | inquire |
| ||
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
