FCH Member Advertisement
FCH News
Turned, Ground & Polished Shafting, Steel
Ground & Polished Shafting is a round shaft or rod, ground and polished to a specified diameter. The purpose of the shaft is usually to allow a pulley or sprocket or gear to be locked in place on the shaft (by welding, screwing, etc.) so that mechanical power can be transmitted to another mechanical device. However, a ground shaft may also be used as an axle for a wheel or other rotating device.
111 member results, (click on any line for more information)
| Buy Ground & Polished Shafting from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| OneMonroe | NC | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 5/16-3/8 | 0.091 dia. x 1-7/8 zinc finish bow tie cotter pin for 5/16-3/8 shaft | 12 |
|
| NAPPCO | TX | Turned, Ground & Polished Shafting | Steel | Plain | 1/4 | 1/4 shaft dia ext gripping ret.ring stl | 1800 |
|
| NAPPCO | TX | Turned, Ground & Polished Shafting | Steel | Phosphate | 7/16 | 7/16 shaft dia ext ret. ring stl blkphos | 50 |
|
| Endries | WI | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 21-09 | 21-09 hair pin cotter zinc (1-1/8-1-1/2 shaftx5) | 300 |
|
| Endries | WI | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 236 | 236 hair pin cotter zinc (3/16 shaftx3/4) | 668 |
|
| Endries | WI | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 208 | 208 hair pin cotter zinc (7/8 shaftx3-3/4) | 3475 |
|
| Endries | WI | Turned, Ground & Polished Shafting | Steel | Zinc/Yellow | 203 | 203 hair pin cotter yellow zinc (1/4 shaft x 1-5/8) | 1220 |
|
| Endries | WI | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 224 | 224 hair pin cotter zinc (1/4 shaft x 1-9/16) | 942 |
|
| Endries | WI | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 225 | 225 hair pin cotter zinc (5/16 shaft x 1-3/32) | 750 |
|
| Endries | WI | Turned, Ground & Polished Shafting | Steel | Zinc/Yellow | 1/2 | 201 hair pin cotter yellow zinc 1/2 or 5/8 shaft x 3in | 300 |
|
| Active | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 7/16-1/2 | bow-120 bowtie cotter for 7/16-1/2 shaft zinc | 193 |
| |
| SWACO | OH | Turned, Ground & Polished Shafting | Steel | Plain | tx-75stpa 3/4 ext push-on shaft ring stl | 4000 |
| |
| SWACO | OH | Turned, Ground & Polished Shafting | Steel | Phosphate | .781 | .781 ret ring for shaft sprst phos (sh-78st pa) | 2000 |
|
| SWACO | OH | Turned, Ground & Polished Shafting | Steel | Phosphate | .551 | .551 ret ring for shaft sprst phos (sh-55st pa) | 9550 |
|
| SWACO | OH | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 1000-556-ka shaft zinc emka | 18 |
| |
| S+S Faste | OH | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 1 3/16 | .080 wire 1-3/16 overall lg hair pin zn 3/32 drill hole 1/4 minimum shaft 3/8 maximum shaft 1/4 inside eye | 196 |
|
| Liberty | IL | Turned, Ground & Polished Shafting | Steel | Phosphate | c rectangular push on nut for 1/2 shaft phos | 16,000 |
| |
| Endries | WI | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 1/2 | 1/2 shaft surelock ring zinc | 14000 |
|
| OneMonroe | MN | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 3/4 | pal nut pushnut for 3/4 diameter shaft steel zinc rohs compliant | 1000 |
|
| OneMonroe | MN | Turned, Ground & Polished Shafting | Steel | Plain | 10 | special hex grooved axle shaft w/m6x1.0 thread on one end 12l14 stl w/liquid salt bath nitriding per ams 2753 per print 100 per bag 10 bags per carton | 6780 |
|
| OneMonroe | MN | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 1 1/4 x 8.62 | 1-1/4 x 8.62 hook shaft zinc plated per print | 2 |
|
| API | IA | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | M10 | key shaft 10x8x305 zncl w/id on both ends per print | 56 |
|
| API | IA | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | key shaft 8mmx7mmx305mm mech zncl w/id on both ends per prin | 41 |
| |
| API | IA | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | key shaft 8mmx8mmx305mm zncl w/id on both ends per print | 102 |
| |
| API | IA | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | M14 | key shaft 14x8x305 zncl w/id on both ends per print | 91 |
|
| API | IA | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | M5 x 5 x 305 | key shaft 5x5x305 zncl w/id on both ends | 144 |
|
| API | IA | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | M6 x 6 x 305 | key shaft 6x6x305 zncl w/id on both ends per print | 1 |
|
| API | IA | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | M12 | key shaft 12x8x305 zncl w/id on both end per print | 65 |
|
| baier & m | SC | Turned, Ground & Polished Shafting | Steel | Plain | M6 x 54.5 | rcl lever shaft 2nd 6x54.5 mm material steel. c1022 surface plain. ligth oil | 10764 |
|
| Brikksen | FL | Turned, Ground & Polished Shafting | Steel | Phosphate | 1/4 | external ring 1/4 shaft steel black phos and oil | inquire |
|
| Brikksen | FL | Turned, Ground & Polished Shafting | Steel | Phosphate | 1/4 | external ring 1/4 shaft steel black phos and oil | inquire |
|
| Brikksen | FL | Turned, Ground & Polished Shafting | Steel | Phosphate | 1/4 | external ring 1/4 shaft steel black phos and oil | inquire |
|
| Brikksen | FL | Turned, Ground & Polished Shafting | Steel | Phosphate | 1/4 | external ring 1/4 shaft steel black phos and oil | inquire |
|
| Brikksen | FL | Turned, Ground & Polished Shafting | Steel | Phosphate | 1/4 | external ring 1/4 shaft steel black phos and oil | inquire |
|
| Brikksen | FL | Turned, Ground & Polished Shafting | Steel | Phosphate | 1/4 | external ring 1/4 shaft steel black phos and oil | inquire |
|
| Brikksen | FL | Turned, Ground & Polished Shafting | Steel | Phosphate | 1/4 | external ring 1/4 shaft steel black phos and oil | inquire |
|
| Optimas | IL | Turned, Ground & Polished Shafting | Steel | Zinc/Yellow | 23.1 x 50.8 x 8.23 2 | hex shaft retainer 23.1 idx50.8x8.23 hx2 thk steel zinc yellow (i) | 1902 |
|
| Optimas | IL | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | M5 x 106 | m5 x 106mm oal shaft pin w/point steel zinc trivalent per drawing rohs (i) | 400 |
|
| Optimas | IL | Turned, Ground & Polished Shafting | Steel | Black Oxide | 1/4 x .025 | 1/4 shaftx.025 thk external e-ring steel black everlube 6107 | 2040 |
|
| Optimas | IL | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | .600 | .600 shaft x .875 bore x .012 thk 3.5 wave spring washer spring steel rohs compliant (p) | 123 |
|
| Optimas | IL | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 7.82 x 520 | 7.82x520mm hex shaft grooved stl zinc clear 0.0005 per dwg rohs ppap | 339 |
|
| American | WI | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 5/32 | 5/32 wire dia. kwic-twist clip zinc (tp-4) fits 1 to 1-1/4 shaft (4 oal) | 300 |
|
| Endries | WI | Turned, Ground & Polished Shafting | Steel | Phosphate | 2.375 | ret ring ext bev 2.375 shaft stl/phos | 275 |
|
| CNB | IL | Turned, Ground & Polished Shafting | Steel | null | 1/2 | 1/2 shaft retention washer spring steel electroplated per astm f1941 fe/zn 5c per print 118120 | 1086 |
|
| Brikksen | FL | Turned, Ground & Polished Shafting | Steel | Phosphate | 1/4 | external ring 1/4 shaft steel black phos and oil | inquire |
|
| Endries | WI | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 216 1/2in shaft x1-15/16 hair pin cotter trivalent clear zinc | 790 |
| |
| Endries | WI | Turned, Ground & Polished Shafting | Steel | Zinc/Yellow | 213 | 213 hair pin cotter yellow zinc (1/4 shaftx1-3/16) | 2568 |
|
| F. Solutions | OH | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 0.091 | bowtie cotter pin 0.091 wire dia x 1-7/8 for 7/16-1/2 shaft zinc plated | 8 |
|
| National | Ont | Turned, Ground & Polished Shafting | Steel | Plain | 3/8 x 15 | 3/8dx15 inc lg hrd.prec.stl shaft | 40 |
|
| National | Ont | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 5/8 | 5/8 dia shaft pushnut sz | 2719 |
|
| National | Ont | Turned, Ground & Polished Shafting | Steel | Plain | M38.50 | over mold shaft 38.50mm o/a length steel p3 prevox 505 | 702500 |
|
| Mansco | MI | Turned, Ground & Polished Shafting | Steel | Phosphate | 1/4 | 1/4 shaft external retainig ring blk phos stacked | 8640 |
|
| Mansco | MI | Turned, Ground & Polished Shafting | Steel | Black Oxide | 1 x 1 | 1 double split shaft collar blk ox 1/box | 148 |
|
| Endries | WI | Turned, Ground & Polished Shafting | Steel | Plain | six-inch acid brushes tin shaft with natural or nylon bristles | 144 |
| |
| Mansco | MI | Turned, Ground & Polished Shafting | Steel | Black Oxide | .375 x 10.392 | .375x10.392 special shaft blk ox & oil | 19230 |
|
| Mansco | MI | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 3/8 | 3/8 shaft x-washer retainer znc 25/bag | 1 |
|
| Mansco | MI | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 5/8 | 5/8 id two piece shaft collar bright znc | 200 |
|
| Mansco | MI | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 3/16 | 3/16 shaft x-washer retainer znc | 31 |
|
| Mansco | MI | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 23.813mm dia x 183.5mm oal shaft w/int/ext m10-1.5 threads w/znc flash-print | 5962 |
| |
| Mansco | MI | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 1/4 | 1/4 shaft x-washer retainer znc 25/bag | 10 |
|
| Mansco | MI | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 1/4 shaft x-washer retainer znc | 101 |
| |
| Mansco | MI | Turned, Ground & Polished Shafting | Steel | Phosphate | M17 | 17 external self-locking push-on shaft retaining ring phos | 30 |
|
| Mansco | MI | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 1/4 shaft x-washer retainer znc 25/bag | 1027 |
| |
| Olander | CA | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | hair spring cotter stl zn 1/8-3/16 shaft | 656 |
| |
| Olander | CA | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | hair spring cotter stl zn 5/16-3/8 shaft | 552 |
| |
| Mansco | MI | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 3/8 shaft x-washer retainer znc | 3454 |
| |
| Komar | IL | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 5/64 x 1 3/16 | 5/64x1 3/16 oa. hairpin cotter-3/8 shaft zinc | 1100 |
|
| SII | IN | Turned, Ground & Polished Shafting | Steel | Black Oxide | kv pinion shaft 36 for 8070 pkt door blk 10/bx | 14 |
| |
| SII | IN | Turned, Ground & Polished Shafting | Steel | Black Oxide | kv pinion shaft 48 for 8090 pkt door blk 10/bx | 11 |
| |
| SII | IN | Turned, Ground & Polished Shafting | Steel | Black Oxide | kv pinion shaft 72 for 8090 pkt door blk 10/bx | 10 |
| |
| OneMonroe | TX | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | hair pin clip .125-.187 shaft dia mb spring wire plated | 4941 |
| |
| MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M6 | shafting din 671 steel plain | inquire |
|
| MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M5 | shafting din 671 steel plain | 7 |
|
| MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M13 | shafting din 671 steel plain | inquire |
|
| MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M12 | shafting din 671 steel plain | 5 |
|
| MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M15 | shafting din 671 steel plain | 76 |
|
| MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M20 | shafting din 671 steel plain | 115 |
|
| MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M25 | shafting din 671 steel plain | 89 |
|
| MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M40 | shafting din 671 steel plain | 24 |
|
| MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M45 | shafting din 671 steel plain | 1 |
|
| MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M65 | shafting steel plain | inquire |
|
| MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M36 | shafting steel plain 36 din 671 | inquire |
|
| MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M7 | shafting steel plain | inquire |
|
| MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M28 | m28 shafting din 671 steel plain | inquire |
|
| MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M20-12l14 | m20-12l14 shafting din 671 steel plain | inquire |
|
| MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M60 | m60 shafting din 671 steel plain | inquire |
|
| MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M70 | m70 shafting din 671 steel plain | inquire |
|
| MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M25 x 1308 | m25x1308 shafting steel plain din 671 | inquire |
|
| MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M46 | m46 shafting al din 671 | inquire |
|
| MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M6 x 895 | m6x895/21 shafting steel plain din 671 | inquire |
|
| MMCC | IL | Turned, Ground & Polished Shafting | Steel | Plain | M50 x 2000 | m50x2000 shafting steel plain din 671 | inquire |
|
| SIS | AZ | Turned, Ground & Polished Shafting | Steel | Phosphate | 13/64 | 13/64 od push nut blk-phos steel for 1/16 shaft diam | 3000 |
|
| General F | MI | Turned, Ground & Polished Shafting | Steel | Plain | .375 x 4.050 | adjustment guide | 4,019 |
|
| General F | MI | Turned, Ground & Polished Shafting | Steel | Plain | M46.68 x 118.5 | M46.68 x 118.5 rod-push inter axle | 220 |
|
| Sonfast | PA | Turned, Ground & Polished Shafting | Steel | Zinc/Yellow | external shaft type ring #re-21 zinc yellow 1074 carbon steel | 3,000 |
| |
| BoltCraft | NE | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 8 long 1-1/4 1045 cr shaft with hole drilled zinc | 100 |
| |
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
