| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| RePneu To | MI | Expansion Plugs | valve plug seal (exp) | 98 |
| |||
| RePneu To | MI | Protective Caps & Plugs | Plastic | o-ring-end cap outside | 40 |
| ||
| RePneu To | MI | Gaskets | upper gasket | 30 |
| |||
| OneMonroe | NC | Brackets & Supports | 16 | 16 bracket | 10 |
| ||
| OneMonroe | NC | Brackets & Supports | 18 | 18 double bracket | 28 |
| ||
| OneMonroe | NC | Latches & Catches | cane bolt latches | 246 |
| |||
| OneMonroe | NC | Latches & Catches | cane bolt latch | 49 |
| |||
| OneMonroe | NC | Latches & Catches | cane bolt latch | 24 |
| |||
| OneMonroe | NC | Latches & Catches | cane bolt latch | 13 |
| |||
| OneMonroe | NC | Latches & Catches | cane bolt latches | 64 |
| |||
| OneMonroe | NC | Latches & Catches | cane bolt latch | 66 |
| |||
| OneMonroe | NC | Latches & Catches | cane bolt latch | 66 |
| |||
| OneMonroe | NC | Latches & Catches | cane bolt latches | 64 |
| |||
| OneMonroe | NC | Handles | t-rodtread brka1 handle | 5 |
| |||
| OneMonroe | NC | Hinges | spring hinge | 1 |
| |||
| OneMonroe | NC | Hinges | flush hinge | 1 |
| |||
| OneMonroe | NC | Grommets & Eyelets | eyelet for the 1782-female part | 60 |
| |||
| OneMonroe | NC | Hinges | hinge-le ft hand | 2 |
| |||
| OneMonroe | MI | Handles | handle/b&p | 2 |
| |||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | 8 | rigid flat free 8 caster | 2 |
| ||
| OneMonroe | NC | Storage Bins | 12 | blue bins 12 bins/case | 2 |
| ||
| OneMonroe | NC | Springs (Compression) | .218 x 1.0 | spring compression .218x1.0 music wire | 1098 |
| ||
| OneMonroe | NC | Hinges | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 1.5 x 24.5 | 1.5 x 24.5 hinge ss .187 pin ss rev a reverse assembled tack weld pin holes both leaves one leaf offset metal stamp part no and revision | 5 |
| |
| ACCURATE | IL | Nails | Plastic | Plain / Furnace Black | 1/4 x 1 | round plastic drive nail anchors | 1500 |
|
| ACCURATE | IL | Handles | 92-32-131 southco door handle l.h. | 4 |
| |||
| ACCURATE | IL | Handles | d10-b22 adjustable handle black | 20 |
| |||
| Jay-Cee | MI | Grommets & Eyelets | Brass | 34 | a eyelet | inquire |
| |
| Jay-Cee | MI | Grommets & Eyelets | Copper | gs3-4 eyelets | inquire |
| ||
| Jay-Cee | MI | Grommets & Eyelets | Brass | gs5-11 eyelet | inquire |
| ||
| Jay-Cee | MI | Gaskets | part# 7561393 piston gasket for taurus riveter | inquire |
| |||
| Jay-Cee | MI | Grommets & Eyelets | Brass | Nickel Plated | 5-12 | gs5-12 brass eyelet nickle plated | inquire |
|
| Jay-Cee | MI | Grommets & Eyelets | Brass | Nickel Plated | 8-5 | gs8-5 brass eyelet nickel plated | inquire |
|
| Jay-Cee | MI | Handles | m95232 (l.h.le for mp-3v) | inquire |
| |||
| Jay-Cee | MI | Handles | m95232 (right handle for mp-3v) | inquire |
| |||
| OneMonroe | NC | Gaskets | 1.75 x 2.00 x .084 | gasket annular 1.75 id x 2.00 od x .084 thk | 74 |
| ||
| OneMonroe | NC | Latches & Catches | draw latch | 1 |
| |||
| S+S Faste | OH | Vibration/Shock Absorbing Mounts, Rubber Bumpers | Steel | Zinc/Clear | door bumper rohs compliant | 8000 |
| |
| S+S Faste | OH | Grommets & Eyelets | Rubber, Buna-N, Neoprene etc. | Plain / Furnace Black | 5/16 | 5/16 rubber grommet (1/8 panel thickness) | 2300 |
|
| S+S Faste | OH | Protective Caps & Plugs | Plastic | Plain / Furnace Black | 1 | plastic cap plus plug sr6 red use bulk box p/n 461468 (if we order 1 500/box) use pkg box p/n 009359 (if we order 200/bx) | 77 |
|
| S+S Faste | OH | Hinges | #10-32 | 10-32 concealed-mount hinge | 6 |
| ||
| S+S Faste | OH | Grommets & Eyelets | Brass | Zinc/Clear | special brass eyelet gold plated (stimpson a-2130) | 7600 |
| |
| S+S Faste | OH | Latches & Catches | double magnetic catch (c080x8) | 188 |
| |||
| S+S Faste | OH | Grommets & Eyelets | grommet | 740 |
| |||
| S+S Faste | OH | Grommets & Eyelets | 9/16 x 15/16 x 7/8 | rigid expandable grommet 9/16 id x 15/16 od x 7/8 panel hole diameter | 4500 |
| ||
| S+S Faste | OH | Protective Caps & Plugs | Nylon (Polyamide) | Plain / Furnace Black | cat# dp-500 black nylon plug button | 800 |
| |
| S+S Faste | OH | Latches & Catches | magnetic catch assembly | 1089 |
| |||
| S+S Faste | OH | Strut Systems (Channels, Clamps, Hangers, etc.) | Galvanized | 3/8-16 | 3/8-16 strut nut with spring galv. | 4495 |
| |
| S+S Faste | OH | Hinges | 300 Stainless (A1,A2, 18-8,304,310 etc.) | stainless uni-flag hinge white shadow (loose pin) | 12100 |
| ||
| S+S Faste | OH | Hinges | 300 Stainless (A1,A2, 18-8,304,310 etc.) | stainless flag hinge white l/h | 6495 |
| ||
| S+S Faste | OH | Protective Caps & Plugs | Plain / Furnace Black | round black thread protector | 352 |
| ||
| S+S Faste | OH | Springs (Compression) | .030 | .030 wire dia compression spring music wire | 4995 |
| ||
| S+S Faste | OH | Protective Caps & Plugs | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 1 1/4 | 1-1/4 plug button stainless steel | 80 |
| |
| S+S Faste | OH | Protective Caps & Plugs | 3/4 | 3/4 plug buttons | 1904 |
| ||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | 5 | 5 swivel stem caster with grey wheel | 1 |
| ||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | 2 3/8 x 3 5/8 | caster swivel-plate wheel size 5 wheel mat polyurethane on polypropylene bearing ball load height 6-1/4 top plate size 2-3/8 x 3-5/8 bolt hole pattern 1-3/4 x 3 loap capacity 300 lbs temp rating-40 to +180 f | 5 |
| ||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | Plastic | Zinc/Clear | 1 3/8-1 7/16 | caster swivel expansion adapter stem stm sz 1-3/8-1-7/16 wheel sz 4 x 1-1/4 wheel mat performa rubber flat tread bearing delrin w/total lock brake load ht 5-1/4 load cap 300 lbs | 2 |
|
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | Plastic | Zinc/Clear | 1 1/2-1 9/16 | caster swivel expansion adapter stem stm sz 1-1/2-1-9/16 wheel sz 4 x 1-1/4 wheel mat performa rubber flat tread bearing delrin w/total lock brake load ht 5-1/4 load cap 300 lbs | 2 |
|
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | Plastic | 2 3/8 x 3 5/8 | caster swivel plate wheel size 4 x 1-1/4 wheel material infiniti gray so ft rubber annular/delrin bearing load height 5-1/8 top plate size 2-3/8 x 3-5/8 bolt hole spacing 1-3/4 x 2-11/16 to 2-15/16 attaching bolt size 5/16 load capacity 300 | 6 |
| |
| RCFast | AZ | Springs (Extension) | Steel | Zinc/Clear | spring, ext, 5/16x1x.029 wire, loop ends, stl, rohs | 1340 |
| |
| RCFast | AZ | Grommets & Eyelets | Brass | Zinc/Yellow | eyelet, 9/16 , black | 500 |
| |
| RCFast | AZ | Springs (Compression) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | spring, compression, 1/4x5/8, ss, pvtd | 800 |
| ||
| YANKEE | NH | Vibration/Shock Absorbing Mounts, Rubber Bumpers | Rubber, Buna-N, Neoprene etc. | Plain / Furnace Black | M4-0.70 x 20 | M4 (0.7)x20 vibration-damping mount 50 duro neoprene w/zinc insert | 3604 |
|
| OneMonroe | NC | Handles | 2 | center control 2 pc red inside handle | 1 |
| ||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | 6 x 2 | 6 x 2 swivel trash cont.caster | 1 |
| ||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | Resin (Phenolic, etc.) | Plain / Furnace Black | 2 3/4 x 3 3/4 | caster swivel-plate wheel sz 3 x 1-13/16 wheel mat phenolic bearing roller load ht 3-7/8 w/brake top plate sz 2-3/4 x 3-3/4 bolehole pattern 1-3/4 x 2-5/8 to 3 load cap 500lbs. | 2 |
|
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | Black Oxide | 3/4 | 3/4 18 ga rd blk lin poly caster socket for 7/16 frs insert ribs od 0.66-0.68 | 6 |
| |
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | Plain / Furnace Black | M36 | caster swivel-plate wheel size 30 mm x 14 mm wheel mat polypropylene bearing plain bore load ht 36 mm top plate 33 mm x 47 mm bolt hole ptrn 22 mm x 35 mm load cap 50 lbs temp rt-4 to +140 f | 318 |
| |
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | 3 | 3 in swivel caster plate mnt | 2 |
| ||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | Steel | steel wheel swivel caster | 4 |
| ||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | 3/4 | 2 3/4 caster | 1 |
| ||
| OneMonroe | NC | Hinges | 1 1/8 | 1-1/8 offset hinge | 2 |
| ||
| OneMonroe | NC | Hinges | 7/8 | 7/8 offset hinge | 1 |
| ||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | oakland cal caster casters | 34 |
| |||
| OneMonroe | NC | Hinges | flush hinge | 2 |
| |||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | rigid plate caster | 78 |
| |||
| OneMonroe | NC | Latches & Catches | 300 Stainless (A1,A2, 18-8,304,310 etc.) | stainless li ft & turn latch | 1 |
| ||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | 4 x 1 1/4 | 4 x 1-1/4 swivel caster mt-ta cart | 1 |
| ||
| OneMonroe | NC | Hinges | pivot hinge bottom | 1 |
| |||
| OneMonroe | NC | Gas Springs, Gas Struts (Lift-O-Mat etc.) | Steel | Zinc/Clear | 10 | gas springindustryline z 10 28 0132 0 0400 wg18 wg18 00450n/5/si tension gas spring | 9 |
|
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 2 1/2 x 3 5/8 | caster swivel plate stainless steel wheel size 4x1-1/4 wheel material brimstone load height 5-1/8 top plate size 2-1/2 x3-5/8 bolt hole pattern 1-3/4 x2-13/16 to 3-1/16 load capacity 300 lbs temp rating-45f to +480f intermittent +425f cont | 3 |
| |
| OneMonroe | NC | Hinges | hinge | 1 |
| |||
| OneMonroe | NC | Hinges | 300 Stainless (A1,A2, 18-8,304,310 etc.) | hinge stainless steel | 1 |
| ||
| ACCURATE | IL | Protective Caps & Plugs | Plastic | x 6 | 1/4&3/8x6 thread protector | 9500 |
| |
| SII | IN | Brackets & Supports | blum slide tandem-plus 15 w/blumotion 1801 locking device back bracket screws | 5 |
| |||
| SII | IN | Brackets & Supports | blum slide tandem-plus 18 w/blumotion 1801 locking device back bracket screws | 28 |
| |||
| SII | IN | Brackets & Supports | blum slide tandem-plus 21 w/blumotion 1801 locking device back bracket screws 6-pack | 760 |
| |||
| SII | IN | Springs (Extension) | 7/16 x 8 1/2 x .047 | 7/16x8-1/2x.047 extension spring) | 2 |
| ||
| SII | IN | Staples | staple 1/4 x5/8 senco narrow crown 5m/bx10bx/cs | 1 |
| |||
| RePneu To | MI | Gaskets | full face shield | 22 |
| |||
| RePneu To | MI | Protective Caps & Plugs | Plastic | end cap adapter | 2 |
| ||
| RePneu To | MI | Handles | handle assembly | 1 |
| |||
| RePneu To | MI | Handles | pistol grip handle p&s | 15 |
| |||
| RePneu To | MI | Protective Caps & Plugs | Plastic | cream screw cap cover | 2000 |
| ||
| RePneu To | MI | Protective Caps & Plugs | Plastic | beige screw cap cover | 3000 |
| ||
| RePneu To | MI | Protective Caps & Plugs | Aluminum | aluminum tone screw cap cover | 3000 |
| ||
| RePneu To | MI | Brackets & Supports | tool mounting bracket | 1 |
| |||
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.

