FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| NAPPCO | TX | O-Rings & Quad Ring Seals (X-Rings) | 70 x 80 | o-ring as568-340 c366y d70 80 | 5 |
| ||
| SJS Prod | CA | Conduit Lock Nuts | Steel | Zinc/Clear | 2 | 2 conduit locknut st zp rohs | 1700 |
|
| NAPPCO | TX | O-Rings & Quad Ring Seals (X-Rings) | Plain | 1.750 x 0.06 | o-ring 1.750od x 0.06thk | 1265 |
| |
| Hayes | CA | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 x 5/1 | 4-40 x 5/16 spline soc c/s 18-8ss | 540 |
|
| Hayes | CA | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #2-56 x 5/16 | 2-56 x 5/16 soc set flat pt 18-8ss | 150 |
|
| OneMonroe | NC | 1/2 x 6 rh hook end | 8 |
| ||||
| OneMonroe | NC | 3/4 x 24 hook end only | 3 |
| ||||
| OneMonroe | NC | 1-1/2 x 6 stub end only | 5 |
| ||||
| OneMonroe | NC | 5/16 stainless steel lifting eye | 8 |
| ||||
| OneMonroe | NC | 41/64 brute platinum (1/2 shank) | 1 |
| ||||
| OneMonroe | NC | wheel4x1-1/2nyfbgls3/4bore | 440 |
| ||||
| Century | FL | Blind Rivet | Plain | 1/8 (.188-.250) | cherry cr4622-4-05 | 187 |
| |
| Century | FL | Grease Fittings | Plain | 1/4 | gl huyett h1627z3 1/4 npt grease fitting | 50 |
| |
| Century | FL | Grommets & Eyelets | 14 | murrplastik 87171834 kdt/z-emc 14 14-15 grommets | 2 |
| ||
| Century | FL | raf m2115-2545-al | 2 |
| ||||
| Olander | CA | Shoulder Washer (Screw Insulator) | Steel | Plain | shoulder wash nyl () () | 3108 |
| |
| Olander | CA | Round Spacer | Steel | Plain | spacer | 85 |
| |
| Olander | CA | Button Head Socket Cap Screw | Steel | Plain | 6-32 x 5/8 but soc cap alloy black | 1546 |
| |
| Olander | CA | Internal Type HO Retaining Ring | Steel | Phosphate | int ret ring stl phos () () | 214 |
| |
| Olander | CA | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 4-40 x 1/2 flat soc sst rohs | 168 |
| |
| Olander | CA | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | 10-16 x 1/2 phil truss t-ab stl zn | 304 |
| |
| Olander | CA | Hex Male/Female Standoff | Brass | Nickel Plated | M3-0.50 x 12 x 5.5 | m3-.5 x 12 x 5.5mm hx m/f stdf brass np () () | 385 |
|
| Olander | CA | Hex Spacer | Aluminum | Plain | #6 x 3/16 x 1/4 hex spacer alum | 152 |
| |
| Olander | CA | Latches & Catches | southco sm lift turn latch () () | 2 |
| |||
| GLF | OH | Double End Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 20 1/4 | 3/8-16 x 20-1/4 d/e stud w/3 thread on both ends 18-8 s/s | 54 |
|
| GLF | OH | Electrical Lugs & Terminals | 12 | 24-12 ga wago 3 conductor block terminal | 35 |
| ||
| FasSpcMfg | FL | Hex Head Cap Screw | ASTM A574 | Plain | 3/4-10 x 1 3/4 | 3/4-10 x 1 3/4 hex cap ft alloy ft | 6 |
|
| FasSpcMfg | FL | Dowel Pin | ASTM A574 | Plain | 1/2 x 4 1/4 | 1/2 x 4 1/4 dowel pin alloy | 5 |
|
| Brikksen | FL | Fully Threaded Stud (All Thread) | Plain | 3/8-16 x 3 1/2 | 3/8-16 x 3-1/2 fully threaded stud asme | 25 |
| |
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | Plain | #8 x 5/8 | #8 x 5/8 square socket pan head type-a | 995 |
| |
| Brikksen | FL | Set Screw (Socket Head) | Plain | M6-1.00 x 10 | m6-1.0 x 10 hex socket set screw full | 300 |
| |
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | Plain | #8 x 3/8 | #8 x 3/8 phillips pan head type-a self | 22445 |
| |
| Set Screw | IL | Set Screw (Slotted Head) | Steel | Plain | 1/4-28 x 7/16 | cup point not hardened slotted less set | inquire |
|
| Set Screw | IL | Set Screw (Slotted Head) | Steel | Plain | 1/4-28 x 7/8 | oval point case hardened slotted less set | inquire |
|
| Set Screw | IL | Set Screw (Slotted Head) | Steel | Zinc/Clear | 1/4-28 x 1 1/2 | oval point case hardened slotted less set | inquire |
|
| Set Screw | IL | Set Screw (Slotted Head) | Steel | Zinc/Clear | 5/16-18 x 5/16 | cup point case hardened slotted less set plate | inquire |
|
| Set Screw | IL | Set Screw (Slotted Head) | Steel | Zinc/Clear | 5/16-18 x 3/8 | cup pt case hardened slotted less set & bake | inquire |
|
| Set Screw | IL | Set Screw (Slotted Head) | Steel | Plain | 5/16-18 x .410 | flat point case hardened slotted less set | inquire |
|
| Brikksen | Wedge Stud Anchor | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 2 3/4 | 3/8-16 x 2-3/4 wedge anchor with nut & | washer 18.8 stainless steel | washer 18.8 stainless steel | 420 |
| |
| Brikksen | Wedge Stud Anchor | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 3 | 3/8-16 x 3 wedge anchor with nut & | washer 18.8 stainless steel | washer 18.8 stainless steel | 7200 |
| |
| Brikksen | Wedge Stud Anchor | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 x 3 | 1/2-13 x 3 wedge anchor with nut & | washer 18.8 stainless steel | washer 18.8 stainless steel | 3000 |
| |
| Brikksen | Wedge Stud Anchor | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 x 3 3/4 | 1/2-13 x 3-3/4 wedge anchor with nut & | washer 18.8 stainless steel | washer 18.8 stainless steel | 408 |
| |
| Brikksen | Wedge Stud Anchor | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 x 5 1/2 | 1/2-13 x 5-1/2 wedge anchor with nut & | washer 18.8 stainless steel | washer 18.8 stainless steel | 1925 |
| |
| Brikksen | Wedge Stud Anchor | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 x 7 | 1/2-13 x 7 wedge anchor with nut & | washer 18.8 stainless steel | washer 18.8 stainless steel | 50 |
| |
| Brikksen | Wedge Stud Anchor | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/8-11 x 5 | 5/8-11 x 5 wedge anchor with nut & | washer 18.8 stainless steel | washer 18.8 stainless steel | 170 |
| |
| Brikksen | Wedge Stud Anchor | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 4 1/4 | 3/4-10 x 4-1/4 wedge anchor with nut & | washer 18.8 stainless steel | washer 18.8 stainless steel | 60 |
| |
| Bossard | AZ | Button Head Socket Cap Screw | Steel | Plain | screw button hd cap | 2500 |
| |
| Bossard | AZ | Solid Rivet | Aluminum | Plain | rivet ms20426ad2-6 | 1000 |
| |
| Bossard | AZ | Conical Disc Spring Washer, Disc Spring, Belleville Washer | Steel | Phosphate | disc spring steel phosphate oil | 120975 |
| |
| Bossard | AZ | Service & Repair Kits (Bolt & Nut Packs) | Grade 8 | Plain | hex bolt 1/2-13 x 3-1/2 grade 8 steel | 100 |
| |
| Bossard | AZ | Round Female/Female Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | standoff stainless penn engineering | 16531 |
| |
| Bossard | AZ | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | hex head cap screw a2 stainless | 236 |
| |
| Bossard | AZ | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain | locknut serrated hex m4 thread | 31225 |
| |
| Bossard | AZ | Solid Rivet | Steel | Plain | rivet ms20426ad5-6.5 | 5000 |
| |
| Bossard | AZ | cap for threaded connector | 4000 |
| ||||
| Bossard | AZ | Socket Head Cap Screw | Steel | Plain | rev b hex soc hd cap m3x6 stl | 21121 |
| |
| Komar | TN | Service & Repair Kits | 4 | t&b #cds007146-002 4 parts per kit |
| |||
| Centennia | CO | Construction Screw, Structural Wood Screw | Steel | Zinc/Clear | #8 x 2 | #8 x 2 phillips flat t/s type-17 w/nibs zinc | 3845 |
|
| Centennia | CO | Threaded Rod | Grade B7 | Zinc/Clear | 3/4-10 x 36 | 3/4-10 x 36 astm a193 b7 all thread rod zinc | 2 |
|
| Centennia | CO | Threaded Rod | Steel | Zinc/Clear | 5/16-24 x 36 | 5/16-24 x 36 allthread rod zinc | 119 |
|
| Centennia | CO | Heavy Hex Structural Bolt (A325, A490, 10.9) | Plain | 5/8-11 x 3 1/4 | 5/8-11 x 3 1/4 a325 bolt only-dom | 481 |
| |
| Centennia | CO | Machine Screw | Brass | Plain | #4-40 x 7/16 | 4-40 x 7/16 slottedflat m/s brass | 328 |
|
| Centennia | CO | Heavy Hex Structural Bolt (A325, A490, 10.9) | Plain | 7/8-9 x 2 3/4 | 7/8-9 x 2 3/4 a325 bolt only infasco | 809 |
| |
| Kanebridge | IL | Machine Screw | Class 8.8 | Black Oxide | M4-0.70 x 16 | m4-0.7x16 6-lobe flat ms class 8.8flat black ox & oil metric fasteners | 100000 |
|
| Kanebridge | IL | Tamper-Proof Security Screw (Ultra-Lok, Penta-Plus, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #14-10 x 1 1/2 | #14-10x1 1/2 hex pin flat security screw type-a 18-8 stainless steel self tapping/sheet metal | 10000 |
|
| Optimas | IL | Pipe Nipple | Steel | 1/2-14 | 1/2-14 nptf x 3.000 oal double end male pipe nipple steel per drawng (p) | 197.97540986537933 |
| |
| SWACO | OH | Shaft Collars, & Adjusting Rings | Steel | Zinc/Clear | M25 x 705 | M25 set collar d705a zinc | 30 |
|
| SWACO | OH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-4 0 x 7/8 | #4-40x7/8 ph pan ms 18-8ss pln | 1555 |
|
| SWACO | OH | Machine Screw | Steel | Zinc/Clear | #8-32 x 1 | 8-32x1 slotted round ms stl zinc | 6900 |
|
| SWACO | OH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 3/16 | #6-32x3/16 phillips tru ms 18-8ss pln | 550 |
|
| SWACO | OH | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 3 1/4 | 3/8-16x3-1/4 hhcs 18-8ss | 84 |
|
| SWACO | OH | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain | 3585-06cnpf138s spec heli-coil inst strip-feed | 6000 |
| ||
| SWACO | OH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 1/2 | #6-32x1/2 ph ovala ms 18-8ss pln | 500 |
|
| Irwin Ind | Ont | Signs & Labels | generic dk1241 labels | 4 |
| |||
| Irwin Ind | Ont | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3 x 5 | m3 x 5 torx flat head machine screw asme spec st/st c/w nylon patch | 1700 |
|
| SWACO | OH | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M4-0.70 | m4-0.7 serr hx flange l/n 18-8 (a2) | 160 |
|
| NBS | CA | 12 Point Flange Screw (CounterBore) | Steel | Plain | 3/8-24 x 4 1/2 | 3/8-24x4-1/2 12 point flange bolt-furnace black (taiwan) | 10000 |
|
| NBS | IL | Dowel Pin | Steel | Plain | 5/16 x 3/4 | 5/16x3/4 dowel pin alloy bright finish. ( made in taiwan ) | 10000 |
|
| NBS | IL | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Phosphate | M8-1.25 x 12 | M8-1.25x12 cl.10.9 frame bolt-non-indented-non-serrated-black phos. & oil (taiwan) din 6921 | 10000 |
|
| NBS | IL | Dowel Pin | Steel | Plain | 5/8 x 1 3/8 | 5/8x1-3/8 dowel pin alloy bright finish. ( made in taiwan ) | 10000 |
|
| Field Fas | IL | Lock Bolt with Collar (HuckBolt etc.) | Plain | huck lockbolt pin (btr-br20-32) grip range (2. | 32 |
| ||
| Field Fas | IL | Lock Nut, Nylon Insert | Steel | Zinc/Clear | 1/2-20 | 1/2-20 ne nylon insert l/n stl zc phos | 175 |
|
| Field Fas | IL | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Plain | #10-24 x 1/2 | 10-24 x 1/2 phillips flat thread cutting sc | 197 |
| |
| Field Fas | IL | Semi-Tubular Rivet | Brass | Plain | .059 x 5/32 | .059 x 5/32 oval hd semi-tubular rivet brass per print | 58000 |
|
| OneMonroe | MN | Lock Bolt with Collar (HuckBolt etc.) | Steel | Zinc/Clear | 1/4 (.125-.375) | 1/4 bobtail pin 90 deg (.125-.375 grip) carbon steel zinc plated | 2660 |
|
| OneMonroe | MN | Drywall Screw | Phosphate | #8 x 3 | 8 x 3 square trim drywall screw black phos | 988 |
| |
| OneMonroe | MN | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain | 1/4-28 | inserts-screw-locking 1/4-28 100 ea 0.5 2d unf ms21209f4-20 | 86 |
| |
| OneMonroe | MN | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10 x 25 | m10 x 25 fl shc ss | 150 |
|
| OneMonroe | MN | Metal Drill Bits | Titanium | 0.213 | #3 titanium nitride coated drills | 6 |
| |
| OneMonroe | MN | Chains, Roller Chains & Links | Plain | #50 | #50 roller chain sbsr-10 coil | 1 |
| |
| OneMonroe | MN | O-Rings & Quad Ring Seals (X-Rings) | Plain | 56 | 568-903 epr 70 o-rings | 25 |
| |
| OneMonroe | MN | External Push-On Shaft Retainer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | ss pullring nonlock w/o patch |
| ||
| OneMonroe | MN | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 x 1 3/8 | 4-40 x 1 3/8 soc cs efi 18-8ss bkps | 475 |
|
| OneMonroe | MN | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 1 1/2-8 x 6 | 1 1/2-8 x 6 a193 b7 te studs 1.5 ff3a x 2.12 ff2a rad 2a | 1 |
|
| OneMonroe | MN | Shoulder Bolt (Stripper Bolt) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | 1/4 x .240 (#10-32) | 1/4x.240 tx spcl shld bolt 10-32 t10 ss blk ox | 2000 |
|
| OneMonroe | MN | Flange Screw w/o serr. (Frame Bolt) | Grade 8 | Plain | 5/8-11 x 5 | 5/8-11 x 5 gr 8. non-serr flange bolt-pln | 7 |
|
| OneMonroe | MN | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | Steel | 4 1/2 x 5/8 | 4-1/2 x 5/8-11 thread. polifan flap disc-co sgp curve steelox ceramic oxide 60 grit large radius | 1 |
| |
| OneMonroe | MN | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #8 x 1/2 | #8 x 1/2 phillips flat sms t-a stl znc | 6000 |
|
| OneMonroe | MN | stanley goatskin heavy duty gloves black & yellow large | 6 |
| ||||
| OneMonroe | MN | Latches & Catches | slam latch | 6 |
| |||
| OneMonroe | MN | Shoulder Bolt (Stripper Bolt) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8 x 1 1/4 (5/16-18) | 3/8 x 1 1/4 shoulder bolt stainless | 901 |
|
| OneMonroe | MN | Wheel Stud (Screw-in & Press-in) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Zinc/Clear | 2 1/2 x 3 5/8 | caster stainless steel swivel plate wheel sz 5 x 1-1/4 wheel mat thermoplastic bearing stainless steel precision ball top plt sz 2-1/2 x 3-5/8 bolt hole ptrn 1-3/4 x 3 load ht 6-1/8 load cap 220 lbs temp rt-30 to +180 f | 2 |
|
| MWRAF | CT | raf electronics part m1620-c-5008-b 10mm rd x 18mm x m5 thread | 5363 |
| ||||
| OneMonroe | MN | Hex Jam Nut | Steel | Zinc/Clear | 5/8-18 | jam pattern reverse lock nut 5/8-18 zc | 504 |
|
| OneMonroe | MN | Taper Bolt Anchor | Plain | tapered end bolt | 15 |
| ||
| OneMonroe | MN | Carriage Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 4 | 1/4-20 x 4 carr. bolt-s.s. | 15 |
|
| OneMonroe | MN | Ball Bearings, Balls, Bearing Mounts | Plain | 2 | 40x80x30.2mm double row angular contact rad b/brg 2 shields | 8 |
| |
| OneMonroe | MN | Socket Head Cap Screw | Class 12.9 | Plain | M3-0.50 x 30 | m3-.5 x 30 soc cs pt 12.9stl din 912-88 | 200 |
|
| OneMonroe | MN | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 1/2-13 x 3 | 1/2-13 x 3 a193b7 ft studs w2 a1942h nuts assembled sc-1 ctd | 85 |
|
| OneMonroe | MN | Slotted Spring Pin (Roll Pin) | Steel | Zinc/Clear | 1/8 x 1 1/8 | 1/8 x 1 1/8 rollpin plated | 1958 |
|
| OneMonroe | MN | Lock Nut, Nylon Insert | Steel | Zinc/Clear | M16 | m16 nylon insert lock nut steel / zinc din 985 | 26 |
|
| Alma Bolt | MI | Machine Screw | Plain | #93344 | #93344 torx t25 x 2 3/4 driver | 42 |
| |
| Alma Bolt | MI | Heavy Hex Nut | Grade A | Plain | 2-4 | 2-4 1/2 heavy hex nut (a563 gr.a) | 137 |
|
| Alma Bolt | MI | Machine Bushings | Plain | #37-09 | #37-09 2 1/2 od x 1 3/4 id 10g regular machinery bushing | 561 |
| |
| Alma Bolt | MI | External Thread Insert, Self-Tapping Insert | Plain | #801420-13 flush (1/4-20 x 13mm) e-z lok thread insert | 984 |
| ||
| Alma Bolt | MI | Dowel Pin | ASTM A574 | Plain | 7/16 x 1 | 7/16 x 1 alloy dowel pin | 357 |
|
| EASTERN SCREW | RI | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #14-16 x 3 1/8 | 14-16 x 3-1/8 phillips pan type-ab 2thread 18-8 | 710 |
|
| Optimas | IL | Round Bar | 300 Stainless (A1,A2, 18-8,304,310 etc.) | M5 x 70 | m5 x 70mm oal straight unthreaded rod a2 ss tmpi quick clean | 10 |
| |
| Optimas | IL | Machine Screw | Steel | Plain | #6-40 x 1/2 | 6-40x1/2 slotted fillister machine screw steel (i) | 6000 |
|
| Optimas | IL | Socket Head Cap Screw | ASTM A574 | Zinc/Black | #10-24 x 3/8 | 10-24x3/8 asme b18.3 socket cap screw alloy zinc black | 2422 |
|
| Optimas | IL | Flange Screw w/o serr. (Frame Bolt) | Class 9.8 | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | M8-1.25 x 98 | m8-1.25 x 98mm hex flange sc cl9.8 zinc flake vibraseal 216 scotchgrip2353 prdwg | 2048 |
|
| Optimas | IL | Gloves & Hand Protection | 4 | hyflex cut level 4 abrasion level 6 gloves size 9-pair | 24 |
| ||
| Hybroco S | MI | CD Weld Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10-1.50 x 20 | m10-1.5 x 20mm cdf ss | 383 |
|
| Empower H | IL | Aircraft Cable | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | ssac18719500stainless steel aircraft cablegrade 304diameter-1/8 type-7x19breaking strength-1 760wt/1 000 ft (lbs)-29reel length-500 feet | 20 |
| |
| Delta | TX | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Zinc/Clear | #12-24 x 7/8 | self drill hex washer (5/16 HEX WITH #3 POINT IS COMMON) | 10118 |
|
| IndexFast | CA | T-Nut (Tee Nut) | Steel | Plain | flange nut non-locking steel plain 83243tf8-zb t-nut straight barrel 1/4 height 3 prong 3/16 height 1/2 flange/black 1109510 | inquire |
| |
| IndexFast | CA | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Zinc/Clear | sheet metal speed nut tinnerman nut (f/j/u) steel zinc/clear 1/4-18 rp 141800 ebf _x000d_regular type lock nut 1/4-18 steel/zinc electroplate | inquire |
| |
| AFT Faste | TX | Socket Head Cap Screw | Steel | Zinc/Clear | M3-0.50 x 40 | M3-0.50x40 socket head cap screw 12.9 alloy zinc din 912 | 2000 |
|
| AFT Faste | TX | Thread-Locking Compounds | threadlocker 140 highstrength 10ml bottle red vibra-tite | 4 |
| |||
| AFT Faste | TX | Electrical Lugs & Terminals | 16-14 | 16-14 awg blue heat shrink 1/2 stud ring terminal (100/pkg.) | 1 |
| ||
| Coburn Myers Fastening Systems | PA | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | hex head cap screw class 8.8 zinc/clear | 63 |
| |
| Coburn Myers Fastening Systems | PA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | machine screw 18-8 stainless plain | 200 |
| |
| Coburn Myers Fastening Systems | PA | Hex Head Cap Screw | Class 8.8 | Zinc/Yellow | hex machine bolt class 8.8 zinc/yellow | 7 |
| |
| Coburn Myers Fastening Systems | PA | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | hex head cap screw 18-8 stainless plain | 135 |
| |
| Coburn Myers Fastening Systems | PA | Flat Head Socket Cap Screw | Class 12.9 | Plain | flat head socket cap screw class 12.9 plain | 23 |
| |
| Coburn Myers Fastening Systems | PA | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | hex head cap screw 18-8 stainless plain | 8 |
| |
| Coburn Myers Fastening Systems | PA | Hex Head Cap Screw | Grade 8 | Plain | hex head cap screw grade 8 plain | 5 |
| |
| Siena | IA | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 2 1/4 | 3/8-16x2-1/4 socket head cap screw stainless steel 18-8 plain finish asme b18.3 | 160 |
|
| AIH | AZ | Machine Screw | Steel | Cadmium/Yellow | #2-56 x 5/16 | ms35265-4 screw machine drilled fillister head steel cad ii | 100 |
|
| BEACON | IL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Black | #8-32 x 3/8 | 8-32 x 3/8 6-lobe (t20) pan head trilobe thread forming screw steel case hardened trivalent black 96hr salt spray to white/120hr to red zinc/bake/wax rohs compliant | 5000 |
|
| Hewes | NY | Socket Head Cap Screw | Steel | Zinc/Black | #6-32 x 1/2 | 6-32x1/2 socket head cap screw alloy steel _x000d_zinc black chromate and bake | 3970 |
|
| Hewes | NY | Ball Bearings, Balls, Bearing Mounts | Nylon (Polyamide) | Plain | 3/32 | 3/32 solid ball nylon | 1500 |
|
| FasSpcMfg | FL | Set Screw (Socket Head) | Ni-Cu Alloy (Monel, K-Monel, etc.) | Plain | 3/8-16 x 3/8 | 3/8-16 x 3/8 socket set flat point k-500 monel | 4 |
|
| FasSpcMfg | FL | Socket Head Cap Screw | 400 Stainless (405, 410,416,420,430 etc.) | Plain | #10-32 x 3/4 | 10-32 x 3/4 socket cap full thread 410 stainless | 26 |
|
| FasSpcMfg | FL | Machine Screw | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | #10-24 x 1 1/4 | 10-24 x 1-1/4 slotted pan head machine screw hastelloy c 276 1 thread | 56 |
|
| OneMonroe | MA | Binding Post & Screw Set (Camtainer Bolt & Nut set, Sex Bolt) | Aluminum | Plain | #8-32 x 1/4 | 8-32 x 1/4 binder post-aluminum | 1000 |
|
| OneMonroe | MA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 3/8 | 10-32 x 3/8 phillips ovalal m/s stainless | 28 |
|
| OneMonroe | MA | Machine Screw | Steel | Zinc/Clear | #10-24 x 5/8 | #10-24 x 5/8 phillips pan head zinc plated machine screw | 2200 |
|
| OneMonroe | MA | Lock Nut with Tooth L/W (K-Lock, Keps, etc.) | Steel | Zinc/Clear | #10-32 | nut 10-32 with conical washer steel zinc | 797 |
|
| OneMonroe | MA | Socket Head Cap Screw | Steel | Zinc/Clear | #10-32 x 1 1/2 | #10-32 x 1-1/2 zinc finish alloy steel socket cap screw | 88 |
|
| OneMonroe | MA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M2.5-0.45-0.45 x 12 | m2.5-0.45 x 12mm a2 s/s phillips pan head macheesecrew din 7985 | 2100 |
|
| Scheinert | NJ | Thumb Screw (Plain) | Steel | Zinc/Clear | 1/4-20 x 1 1/2 | 1/4-20x1-1/2 thumb screw type p zinc clear | 8000 |
|
| Longhorn | TX | Hex Head Cap Screw | Grade 2 | Plain | 7/8-9 x 10 1/2 | 7/8-9 x 10-1/2 hex cap screw gr 2 h | 2 |
|
| Raw Produ | NJ | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8 x 1 3/4 | square drive truss head sms 304 ss #8 x 1-3/4 | 11478 |
|
| Raw Produ | NJ | Self-Tapping Screw w/ Neo Bonded Washer (Roofing/Siding/Pole Barn Screw) | Rubber, Buna-N, Neoprene etc. | Plain | #12 x 1 | metalgrip t3 self driller roofing screw with epdm washer-black-#12 x 1 | 500 |
|
| Raw Produ | NJ | Self-Tapping Self-Drilling Screw (Tek etc.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | #12-14 x 2 1/2 | phillips pan head self drill 410 ss #12-14 x 2-1/2 | 878 |
|
| Raw Produ | NJ | Weld Nut | Steel | Plain | 1/4-20 | hex weld nuts plain short pilot 6 projections 1/4-20 | 1040 |
|
| Raw Produ | NJ | Weld Nut | Steel | Plain | 7/16-14 | hex weld nuts plain long pilot 3 projections 7/16-14 | 703 |
|
| Raw Produ | NJ | Sems Machine Screw | Steel | Zinc/Clear | #6-32 x 1/2 | phillips pan head sems screw with external tooth lock washer zinc #6-32 x 1/2 | 7252 |
|
| Raw Produ | NJ | Split Lock Washer | Grade 8 | Plain | 1 | split ring lock washers grade 8 1 | 508 |
|
| Raw Produ | NJ | Channel Nut | Steel | Zinc/Clear | 5/8-11 | channel nuts 5/8-11 zinc | 500 |
|
| Raw Produ | NJ | Machine Screw | Brass | Plain | #10-32 x 1 1/2 | brass slotted round head ms #10-32 x 1-1/2 | 100 |
|
| F. Solutions | OH | Round Bar | Steel | 5/8 x 12 | round bar 5/8 x 12 1045 steel | 48 |
| |
| F. Solutions | OH | Slotted Spring Pin (Roll Pin) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 3/8 x 3 1/4 | roll pin 3/8 x 3 1/4 420 stainless | | 50 |
|
| F. Solutions | OH | Hex Head Cap Screw | Grade 5 | Plain | hex head cap screw 1-8 x 7-1/2 gr 5 plain | 8 |
| |
| F. Solutions | OH | Hex Tap Bolt (Fully Threaded) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 x 5 1/2 | hex head tap bolt 1/2-13x5-1/2 304 ss | 25 |
|
| National | Ont | Panel & Trim Clips (J-Clips, U-Clips) | Steel | Plain | 6.25 x 12 x 2.5 | panel clip 6.25 x 12 x 2.5 thk panel acetal natural | 4118 |
|
| National | Ont | Flange Screw w/o serr. (Frame Bolt) | Class 8.8 | Plain | M5-0.80 x 7 | m5 x 0.8 x 7 machine screw phil hex flange 8.8 mfzn2-k | 22400 |
|
| National | Ont | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Plain | M6-2.70 x 40 | m6-2.70 x 40mm hex flange phil/slot head tapping screw steel ps50031 black tap | 49070 |
|
| Mansco | MI | Socket Head Cap Screw | Class 12.9 | Plain | M16-2.00 x 75 x 25 | M16-2.0x75 soc cap scr cl12.9 pln 25/box din 912 | 12 |
|
| Mansco | MI | Flat Head Socket Cap Screw | Class 10.9 | Plain | m6-1.0 x 30mm flat hd soc cap scr cl10.9 pln w/precote 80 | 2128 |
| |
| Mansco | MI | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | 10-16 x 1 pan phil ty-ab triv znc | 6237 |
| |
| AFI | FL | Self-Clinching Standoff | Steel | Plain | blind threaded standoffs () | 1850 |
| |
| AFI | FL | Protective Caps & Plugs | Plastic | silicone flange cap () | 4000 |
| ||
| AFI | FL | Round Female/Female Standoff | Steel | Plain | threaded standoffs for close to edge app () | 3809 |
| |
| AFI | FL | Grommets & Eyelets | grommet () | 4300 |
| |||
| AFI | FL | self broaching blind threaded fastener () | 2000 |
| ||||
| Mansco | MI | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Zinc/Clear | 8-18 x 1/2 inhxwa slot self drill #2 triv znc w/serr | 1435000 |
| |
| Blackland Precision Hardware,LLC | TX | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain | heli-coil 334-6 | 1 |
| ||
| Stelfast | OH | Hex Head Cap Screw | Grade 8 | Plain | 1 3/4-5 x 6 | 1-3/4-5x6 hex hd cap screw grade-8 | inquire |
|
| Parker | AZ | Socket Head Cap Screw | Superalloy (Inconel, Hastelloy, Alloy 20) | Passivated | #10-32 x 3/4 | 10-32 x 3/4 socket head cap screw fully threaded a286 passivated ff-s-86 per nas1351n3-12 made in u.s.a. | 185 |
|
| Arden | WI | Fender Washer | Steel | Zinc/Clear | 3/8 x 1 1/2 | 3/8x1 1/2 fender wshr zc | inquire |
|
| Arden | WI | Socket Head Cap Screw | Steel | Black Oxide | 3816 x 4 1/2 | 3816x4 1/2 hxsoc cs blk | inquire |
|
| BHAM | TX | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Plain | #12-14 x 3 | #12-14x3 longlife drill screw ww b18.6.4 | 3250 |
|
| THRDFAST | AL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M16-2.00 x 130 | a2 ss hex c/s | 2 |
|
| THRDFAST | FL | Ball Bearings, Balls, Bearing Mounts | 3/8 | femalex1/4 male adap w/frict ball | 2 |
| ||
| THRDFAST | MS | Wire Rope Clamps, U-Bolt Clamps | Steel | Galvanized | 1/2 | forged wire rope clip hdg | 9 |
|
| THRDFAST | AL | Wood Screw | Steel | Zinc/Clear | #14 x 4 | phil flat w/s b18.6.1 | 250 |
|
| THRDFAST | MS | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Galvanized | 3/4-10 x 2 1/4 | a325 type-1 str/b hdg domestic b18.2.1 b18.2.6 | 17 |
|
| BRIGHBEST | IL | Drywall Screw | Steel | Phosphate | #6-9 x 1 1/4 | #6-9x1 1/4 bugle head phil coarse proferred drywall screws black phosphated unc | 124837000 |
|
| Lightning | LA | Bent Anchor Bolt (J-Bolt, L-Bolt) | Grade 5 | Galvanized | 1 1/4-7 x 24 | l-anchor low carbon hot dip 3 hook / 6 thread length / hdg | 37 |
|
| Lightning | LA | Hex Machine Bolt | Grade 2 | Galvanized | 3/8-16 x 4 | h/b gr.2 . | 306 |
|
| Lightning | LA | Grade 2H | 1/2-13 | 1/2-13 astm a194 gr. 2h heavy hex anco pin lock nuthdg domestic | 100 |
| ||
| Lightning | LA | Heavy Hex Nut | Grade 7 | Plain | 2 1/2-8 | astm a194 gr. 7 heavy hex nut | 300 |
|
| Lightning | LA | Hex Jam Nut | Steel | Zinc/Clear | M16-1.50 | hex jam nut fine fine thread din 439b | 1000 |
|
| Lightning | LA | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M2.5-0.45 x 8 | socket capscrew a-2 ss | 476 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B16 | Plain | 1 1/8-8 x 6 3/4 | astm a193 gr. b16 all thread stud | 560 |
|
| Lightning | LA | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #6 x 1/4 | slotted hwh t/s zp | 39000 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | 5/16-18 x 1 3/4 | all thread stud hastelloy c-276 | 424 |
|
| Lightning | LA | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B7 | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 5/8-11 x 5 | astm a193 b7 heavy h/b teflon blue | 96 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
