FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Jackson | MS | Split Lock Washer | 316, 317, A4 Stainless | Plain | 1 | 1 lock 316 ss | 25 |
|
| Jackson | MS | Flat Washer | Aluminum | Plain | 3/16 | (as-10) back up for rivets | 18786 |
|
| Jackson | MS | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | M6 | countersunk terra external tooth l/w din 6798v | 456 |
|
| Jackson | MS | Flat Washer | Steel | Zinc/Clear | .262 x .560 x .0052 | .262 idx.560 odx.0052 special | 5250 |
|
| Jackson | MS | Flat Washer | Steel | Plain | round special 114mm idx160mm odx9mm thick finish | 4 |
| |
| OneMonroe | NC | Flat Washer | ms27183-2 | 3782 |
| |||
| Century | FL | Bonded EPDM Sealing Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #14 x 7/8 | 14 x 7/8 bonded blk epdm washer 14 x 7/8 bonded black epdm washer s/s p/n sw14x7/8 | 398 |
|
| Century | FL | Flat Washer | Plain | seastrom 5702-15-20-c2 flat washer | 2300 |
| ||
| Century | FL | Flat Washer | Brass | Plain | #14 | #14 small pattern f/w brass bright dip | 1900 |
|
| Century | FL | Flat Washer | Steel | Zinc/Yellow | 11/16 | x-washer 11/16 groove zinc yellow | 1800 |
|
| Century | FL | Flat Washer | Steel | Plain | M | nas1523-3e washer(seal) | 730 |
|
| Century | FL | Flat Washer | Black Oxide | #2 | nas1149cn232b | 1728 |
| |
| Century | FL | Flat Washer | Steel | Plain | an960xc8l | 950 |
| |
| OneMonroe | NC | Flat Washer | Brass | Plain | 3/8 x 7/8 | 3/8 x 7/8 flat washer brass pkg | 478 |
|
| OneMonroe | NC | Split Lock Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #2 | washer split lock #2 s/s | 950 |
|
| OneMonroe | NC | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8 | 3/8 washer type-a wide stainless | 302 |
|
| OneMonroe | NC | SAE Flat Washer | Steel | Plain | 1 3/8 | 1-3/8 plain finish sae flat washer | 226 |
|
| OneMonroe | NC | Plate Washer (Square & Rect.) | Steel | Galvanized | 1/2 x 2 1/4 x 3/16 | 1/2 x 2 1/4 od x 3/16 thick-round plate washer hdg | 49 |
|
| OneMonroe | NC | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/16 | 3/16 round back-up washer stainless | 2000 |
|
| OneMonroe | NC | Flat Washer | Nylon (Polyamide) | Plain | .375 x .625 x .093 | 5/16 f/w nyl nat .375 x .625 x .093 | 22 |
|
| OneMonroe | NC | Split Lock Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 | 1 split lockwasher stainless | 20 |
|
| OneMonroe | NC | Beveled Washer (Round & Square) | Steel | Galvanized | 5/16 | 5/16 bevel washer galv | 2 |
|
| OneMonroe | NC | Tooth Lock Washer (Int. & Ext.) | Steel | Plain | 5/16 | 5/16 external tooth l/w | 50 |
|
| Endries | WI | Tooth Lock Washer (Int. & Ext.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 1/4 | 1/4 410 stainless steel internal tooth lock | 3600 |
|
| Endries | WI | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Yellow | 3/8 | 3/8 internal tooth lock yellow zinc | 88541 |
|
| MetricThrd | CA | Conical Disc Spring Washer, Disc Spring, Belleville Washer | Steel | Plain | M3 | m 3 din 6796-st conical spring washers | 2,000 |
|
| MetricThrd | CA | Conical Disc Spring Washer, Disc Spring, Belleville Washer | Steel | Plain | M5 | m 5 din 6796-st conical spring washers | 5,000 |
|
| MetricThrd | CA | Conical Disc Spring Washer, Disc Spring, Belleville Washer | Steel | Plain | M6 | m 6 din 6796-st/zn conical spring washers | 101,980 |
|
| MetricThrd | CA | Conical Disc Spring Washer, Disc Spring, Belleville Washer | Steel | Plain | M8 | m 8 din 6796-st phos or zinc conical spring washers | 50,113 |
|
| MetricThrd | CA | Conical Disc Spring Washer, Disc Spring, Belleville Washer | Steel | Plain | M10 | m10 din 6796-st/zn conical spring washers | stock |
|
| MetricThrd | CA | Conical Disc Spring Washer, Disc Spring, Belleville Washer | Steel | Plain | M12 | m12 din 6796-st/zn conical spring washers | 8,924 |
|
| MetricThrd | CA | Conical Disc Spring Washer, Disc Spring, Belleville Washer | Steel | Plain | M14 | m14 din 6796-st conical spring washers | 200 |
|
| MetricThrd | CA | Conical Disc Spring Washer, Disc Spring, Belleville Washer | Steel | Plain | M16 | m16 din 6796-st conical spring washers | 1,038 |
|
| MetricThrd | CA | Conical Disc Spring Washer, Disc Spring, Belleville Washer | Steel | Plain | M18 | m18 din 6796-st conical spring washers | 18,088 |
|
| MetricThrd | CA | Conical Disc Spring Washer, Disc Spring, Belleville Washer | Steel | Plain | M20 | m20 din 6796-st conical spring washers | 500 |
|
| MetricThrd | CA | Conical Disc Spring Washer, Disc Spring, Belleville Washer | Steel | Plain | M24 | m24 din 6796-st conical spring washers | 100 |
|
| MetricThrd | CA | Conical Disc Spring Washer, Disc Spring, Belleville Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M16 | m16 din 6796-a2 ss conical spring washers | 500 |
|
| MetricThrd | CA | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | M2 | m 2 din 6797 a-st/zn ext-tooth l/washers | 30,000 |
|
| MetricThrd | CA | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | M2.5 | m 2.5 din 6797 a-st/zn ext-tooth l/washers | 276,570 |
|
| MetricThrd | CA | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | M3 | m 3 din 6797 a-st/zn ext-tooth l/washers | 47,257 |
|
| MetricThrd | CA | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | M4 | m 4 din 6797 a-st/zn ext-tooth l/washers | 143,336 |
|
| MetricThrd | CA | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | M5 | m 5 din 6797 a-st/zn ext-tooth l/washers | 79,509 |
|
| MetricThrd | CA | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | M6 | m 6 din 6797 a-st/zn ext-tooth l/washers | 111,400 |
|
| MetricThrd | CA | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | M8 | m 8 din 6797 a-st/zn ext-tooth l/washers | 44,815 |
|
| MetricThrd | CA | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | M10 | m10 din 6797 a-st/zn ext-tooth l/washers | 51,600 |
|
| Bossard | AZ | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | rev c flatwasher 18-8 stainless | 390 |
| |
| Bossard | AZ | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M8 | rev a m8 flat washer a2 ss | article numbers | 2000 |
|
| Bossard | AZ | Flat Washer | Steel | Plain | M5 | rev a m5 flat washer steel 140-250hv | article numbers | 8400 |
|
| Bossard | AZ | Two-Piece Wedge Lock Washer (Heico-Lock, Disc-Lock, etc.) | Plain | #6 | washer #6 split lock .148 id x .250 od wm berg/rexnord | wm berg/rexnord | 3970 |
| |
| Bossard | AZ | Conical Ribbed Safety Washer (Schnorr) | Plain | washer rip-lock bn20192 | article numbers | 50 |
| ||
| Bossard | AZ | Conical Disc Spring Washer, Disc Spring, Belleville Washer | Plain | conical washer bn20187 | article numbers din 6796 | 85 |
| ||
| Bossard | AZ | Flat Washer | Plain | 13 x 15 x .22 | washer fs 13 x 15 x .22 | article numbers | 2000 |
| |
| Bossard | AZ | Conical Ribbed Safety Washer (Schnorr) | Plain | ribbed lock washer type s bn20041 | article numbers | 1000 |
| ||
| Bossard | AZ | Conical Disc Spring Washer, Disc Spring, Belleville Washer | Plain | washer conical spring bn65363 | metric product | 50 |
| ||
| Bossard | AZ | Flat Washer | Plain | flatwasher bn1414 | article numbers din 433 | 100 |
| ||
| Bossard | AZ | Conical Disc Spring Washer, Disc Spring, Belleville Washer | Plain | M5.2 x 10 x 0.75 | disc spring bn838 5.2x10x0.75mm | article numbers | 900 |
| |
| Bossard | AZ | Conical Disc Spring Washer, Disc Spring, Belleville Washer | Plain | M5.2 x 10 x 0.7 | disc spring bn838 5.2x10x0.7mm | article numbers | 400 |
| |
| Bossard | AZ | SAE Flat Washer | Grade 9 | Plain | flatwasher sae tension l-9 | misc fasteners/hardware | 11500 |
| |
| Bossard | AZ | Conical Disc Spring Washer, Disc Spring, Belleville Washer | Plain | M3 | conical spring washer m3 bn2312 | article numbers | 12100 |
| |
| Bossard | AZ | Conical Disc Spring Washer, Disc Spring, Belleville Washer | Plain | washer conical spring bn2312 | article numbers din 6796 | 700 |
| ||
| Bossard | AZ | Split Lock Washer | Galvanized | washer split lock hot dip galvanized | misc fasteners/hardware | 200 |
| ||
| Bossard | AZ | Tooth Lock Washer (Int. & Ext.) | Plain | lockwasher external | misc fasteners/hardware | 3464 |
| ||
| Bossard | AZ | Curved/Wave Spring Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | wave washer stainless steel | article numbers din 137b | 22 |
| |
| Bossard | AZ | Curved/Wave Spring Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | wave washer stainless steel | article numbers din 137b | 55 |
| |
| Bossard | AZ | Curved/Wave Spring Washer | Plain | spring wave washer bn678 | article numbers din 137b | 17800 |
| ||
| Endries | WI | Tooth Lock Washer (Int. & Ext.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | #8 | #8 410 stainless steel countersink external tooth lock | 635 |
|
| Endries | WI | Two-Piece Wedge Lock Washer (Heico-Lock, Disc-Lock, etc.) | Steel | Electrolytic Zinc Basecoat + Topcoats (Climacoat, Climaseal, etc.) | nl10spdp m10x.83 nord lock delta protekt zinc flake zinc (pairs) | 100 |
| |
| Endries | WI | SAE Flat Washer | Steel | Zinc/Clear | .813 x 1.469 x .122 | .813x1. 469x.122 sae flat zinc | 200 |
|
| Endries | WI | Direct Tension Indicating (DTI) Washer | Steel | Plain | 1 | 1 a490 load indicating plain | 3600 |
|
| Endries | WI | Conical Disc Spring Washer, Disc Spring, Belleville Washer | Steel | Zinc/Clear | M10 | M10 sn212745 conical spring lock zinc | 200 |
|
| Endries | WI | Flat Washer | Steel | Zinc/Clear | 1/4 | 1/4 type-b wide flat hex chromium free 96 hr salt spray zinc (.281x1.00x.063) | 3270 |
|
| Endries | WI | High Collar Split Lock Washer | Steel | Zinc/Clear | M12 | M12 high collar split lock zinc din 7980 | 100 |
|
| Endries | WI | Fender Washer | Steel | Zinc/Clear | 5/32 x 3/4 x .036 | 5/32x3/4x.036/.065 fender trivalent clear zinc | 56100 |
|
| Endries | WI | Flat Washer | Steel | Black Oxide | 1/2 x .557 x 1.368 | 1/2 standard flat black oxide (.557x1.368x.086) | 45648 |
|
| Endries | WI | Fender Washer | Steel | Galvanized | .812 x 3.00 x 0.235/0.265 | .812x3.00x0.235/0.265 fender hot dip galvanized | 1032 |
|
| Endries | WI | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6 | M6 a2 18-8 304 flat din 125a | 1000 |
|
| Endries | WI | SAE Flat Washer | Steel | Zinc/Yellow | 1-1/4 sae flat yellow zinc (1.368x2.493x.136) | 137 |
| |
| Endries | WI | Beveled Washer (Round & Square) | Iron | Plain | 3/4 | 3/4 malleable bevel plain | 30 |
|
| Endries | WI | Split Lock Washer | Steel | Zinc/Clear | 7/8 | 7/8 regular split lock mechanical zinc | 924 |
|
| Endries | WI | Flat Washer | Steel | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | .141 x .312 x .016 | .141x.312x.016 white teflon flat | 742 |
|
| Endries | WI | Split Lock Washer | Steel | Cadmium/Yellow | #10 | ms35338-43 10 regular lock | 50 |
|
| Endries | WI | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | .089 x . x .03 | .089x.188x.03 18-8 s/s steel flat clean | 170 |
|
| Endries | WI | Split Lock Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #2 | ms35338-134 2 316 stainless steel regular lock 304ss | 19300 |
|
| Endries | WI | SAE Flat Washer | Grade 8 | Zinc/Yellow | 1/4 | 1/4 sae flat gr 8 zn/ye | 42440 |
|
| Endries | WI | Conical Disc Spring Washer, Disc Spring, Belleville Washer | Steel | Zinc/Clear | M2 | M2 conical spring trivalent clear zinc 2.2x5x.6 | 100 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
