FCH News

Buy from one of our FCH Network Members
SupplierLocTypeMaterialFinishSizeDescriptionQty 
METRO INDOHMetal Drill BitsSteelM4m4 135 eg split point drill bit hss gold 170-ag57
    Contact_Supplier
METRO INDOHScrewdriving Insert Bits & Power BitsSteelM4-38m4 x 38 ball end hex long insert bit 2 pack1
    Contact_Supplier
JacksonMSScrewdriving Insert Bits & Power BitsSteelm4 x 1 power bit triple square for 12 point applications1
    Contact_Supplier
JacksonMSScrewdriving Insert Bits & Power BitsSteel4mm x 1 metric torx tamperproof bit with pin hole2
    Contact_Supplier
METRO INDOHScrewdriving Insert Bits & Power BitsM4 x 49hex bit 1/4 hex drive impact (2 pack) 768645
    Contact_Supplier
JacksonMSMachine TapsM4 x .70m4 x .70 pitch bottoming tap9
    Contact_Supplier
JacksonMSMachine TapsM4 x .70m4 x .70 pitch taper tap (starter tap)9
    Contact_Supplier
JacksonMSScrewdriving Insert Bits & Power BitsSteel4mm hex insert bit2
    Contact_Supplier
CenturyFLMetal Drill BitsSteelM4-0.70 x 6b1834c04006n screw hex soc button hd m4x0.7x6 a1-70500
    Contact_Supplier
CenturyFLScrewdriving Insert Bits & Power BitsSteelM4-0.70#400-m4 insert for wood brass m4x0.7 9.53 length (1/4 drill size)2475
    Contact_Supplier
YANKEENHMetal Drill BitsM4m4 high speed drill bit us made-dom.6
    Contact_Supplier
YANKEENHMachine TapsM4-0.70M4(.7) spiral pt. tap us made-domestic12
    Contact_Supplier
EndriesWIColletsBrassPlainM4M4 brass b collet2
    Contact_Supplier
SWACOOHMachine TapsM4 x .75M4x.75 typ 780 plug tap8
    Contact_Supplier
BossardAZCountersink CuttersSteelrev 4.1 bolt m4-0.7 x 18 (88)4638
    Contact_Supplier
BossardAZAdapters, Arbors, & MandrelsM4M4 mandrel for riv790 tool6
    Contact_Supplier
EndriesWIMachine TapsSteelM4-0.7583040 m4x.75 3 flute plug tap (consolidated toledo only)18
    Contact_Supplier
NAPPCOTXMachine TapsM4 x 0.7M4x0.7 hss bottom tap din.352b 3
    Contact_Supplier
NAPPCOTXMachine TapsSteelM4-7.00m4-7 spiral tap 2 flute36
    Contact_Supplier
MESAFASTCAMachine TapsM4-0.70hss magnum spiral pnt plug tap 2fl1.0
    Contact_Supplier
ACCURATEILMachine TapsM4-0.70tap spiral pointed hss usa9
    Contact_Supplier
Jay-CeeMIAdapters, Arbors, & MandrelsM4mandrel for 39200 nutter toolinquire
    Contact_Supplier
Jay-CeeMIAdapters, Arbors, & MandrelsM44 mandrel for kj60/140sp rivet nut toolinquire
    Contact_Supplier
Jay-CeeMIAdapters, Arbors, & MandrelsM4mandrel for 39300 tool2
    Contact_Supplier
Jay-CeeMIAdapters, Arbors, & MandrelsM4mandrel for spin spin tool67
    Contact_Supplier
Jay-CeeMINut Driving Bits, NutsettersM4bolt driverinquire
    Contact_Supplier
OneMonroeNCMachine DiesSteelM4-.7-0.70m4-.7 hex rethreading die1
    Contact_Supplier
OneMonroeNCMachine TapsSteelM4-.7-0.70m4-.7 high speed steel bottom tap3
    Contact_Supplier
OneMonroeNCMachine TapsSteelM4-.7-0.70m4-.7 high speed steel plug tap3
    Contact_Supplier
OneMonroeNCMetal Drill BitsSteelM4-50-50m4 x 50 hex bit (1/4 shank)18
    Contact_Supplier
Alma BoltMIMetal Drill BitsSteelM4-8.00m4 xl8 | champion drill bit brute platinum1
    Contact_Supplier
Alma BoltMIMachine TapsSteelM4-0.70m4 x .7 champion 308m | high speed steel taper tap17
    Contact_Supplier
Alma BoltMIMachine TapsSteelM4-0.70m4 x .7 nitro | spiral flute bottom tap3
    Contact_Supplier
Alma BoltMIMachine TapsSteelM4-0.50m4 x .5 | h.s.s. taper tap5
    Contact_Supplier
Alma BoltMIMachine TapsSteelM4-0.70m4 x .7 champion 308m | high speed steel taper tap32
    Contact_Supplier
Alma BoltMIMachine TapsSteelM4-0.70m4 x .7 brute platinum | hd gun tap1
    Contact_Supplier
Alma BoltMIMachine TapsSteelM4-0.70m4 x .7 champion 321m | high speed steel gun tap3
    Contact_Supplier
Alma BoltMIMachine DiesSteelM4-0.70m4 x .7 champion 330m | hex rethread die4
    Contact_Supplier
EmpireWAScrewdriving Insert Bits & Power BitsM44mm hex power bit 3 long 1/4 stock100
    Contact_Supplier
EmpireWAScrewdriving Insert Bits & Power BitsM44mm hex power bit 3 long98
    Contact_Supplier
GOEBELTXHole SawsSteelM4battery hex hole cutter go-600 for hex holes m4 m12 for hex holes m4 m12inquire
    Contact_Supplier
MESAFASTCAAnnular CuttersSteelM4-0.70 x 10m4-0.7 x 10mm rotaloc panel stud insert stainless62.0
    Contact_Supplier
MtrcSpecCAMetal Drill Bits300 Stainless (A1,A2, 18-8,304,310 etc.)M4M4 drill jobber h.18-8 304stock
    Contact_Supplier
MtrcSpecCAMachine TapsM4-0.75M4-0.75 plug tap hssstock
    Contact_Supplier
MtrcSpecCAMachine TapsM4-0.50M4-0.5 plug tap hssstock
    Contact_Supplier
MtrcSpecCAMachine TapsM4-0.50M4-0.5 bottoming tap hssstock
    Contact_Supplier
MtrcSpecCAMachine TapsM4-0.70M4-0.7 tap bottom hssstock
    Contact_Supplier
MtrcSpecCAMachine TapsM4-0.50M4-0.5 tap taper hssstock
    Contact_Supplier
MtrcSpecCAMachine TapsM4-0.35M4-0.35 bottom tap hssstock
    Contact_Supplier
MtrcSpecCAMachine TapsM4-0.70M4-0.7 taper tap hssstock
    Contact_Supplier
MtrcSpecCAMachine TapsM4-0.70M4-0.7 l.h. plug tapstock
    Contact_Supplier
MtrcSpecCAMachine TapsM4-0.70M4-0.7 tap plug hssstock
    Contact_Supplier
MtrcSpecCAMachine DiesM4-0.70M4-0.7 die hssstock
    Contact_Supplier
MtrcSpecCAMachine DiesM4-0.50M4-0.5 round adj die hssstock
    Contact_Supplier
MtrcSpecCAMachine DiesSteelM4-0.70M4-0.7 die hex carbon stl.stock
    Contact_Supplier
MtrcSpecCAMachine DiesM4-0.75M4-0.75 die hssstock
    Contact_Supplier
MtrcSpecCAMachine DiesM4-0.70M4-0.7 die l.h. hssstock
    Contact_Supplier
MtrcSpecCAMachine DiesM4-0.70M4-0.7 die rnd adj. 1 od hssstock
    Contact_Supplier
MtrcSpecCAMachine DiesM4-0.50M4-0.5 hex die hssstock
    Contact_Supplier
MESAFASTCAAnnular CuttersSteelM4-0.70 x 10m4-0.7 x 10mm rotaloc panel stud insert stainless62.0
    Contact_Supplier
F. SolutionsOHMachine TapsSteelM4-0.70mm hss p tap 4 x 0.712
    Contact_Supplier
F. SolutionsOHMachine TapsSteelM4-0.70mm hss b tap 4 x 0.712
    Contact_Supplier
F. SolutionsOHMachine TapsSteelM4-0.70mm hss sp tap 4x0.712
    Contact_Supplier
NationalOntMetal Drill BitsSteelM4-2.00 x 1/44mm x 2 x 1/4 hex bit14
    Contact_Supplier
NationalOntMetal Drill BitsSteelM4-1.00 x 1/44mmx1 x1/4 hex bit8
    Contact_Supplier
NationalOntMetal Drill BitsSteelM44mm tamp resist hex bit 8650p5157
    Contact_Supplier
ManscoMIMachine TapsSteelM4-0.70m4-0.7 tap taper end 1/box5
    Contact_Supplier
AbabaCAScrewdriving Insert Bits & Power BitsM44mm magic-ring metric power bit 1/4 dr (wiha)23
    Contact_Supplier
AbabaCAMachine TapsM4 x .7m4 x .7 spiral point high speed plug tap19
    Contact_Supplier
AbabaCAMachine DiesSteelM4 x .74mm x .7 carbon steel metric hex die2
    Contact_Supplier
AbabaCAScrewdriving Insert Bits & Power BitsM4m4 hex bit socket 3/8 dr 2 long1
    Contact_Supplier
AbabaCAAdapters, Arbors, & MandrelsM4-0.70m4-.7 mandrel for tool #392002
    Contact_Supplier
AbabaCAMachine TapsM4 x .7m4 x .7 spiral point high speed plug tap4
    Contact_Supplier
S IIINMachine TapsM4-0.70m4-.7 spiral pointed plug tap)5
    Contact_Supplier
MidStatesMIMachine DiesM4-0.75hex die27
    Contact_Supplier
MidStatesMIMetal Drill BitsM4mb mitee bite clamp6
    Contact_Supplier
HBBOLTCAMachine DiesM4 x .74 x .7 hex die rethreading3
    Contact_Supplier
HBBOLTCAM4 x .74 x .7 tap taper7
    Contact_Supplier
MMCCILScrewdriving Insert Bits & Power BitsSteelPlainM4hex bit socket din 7422 chrome vanadium steel 6-point314
    Contact_Supplier
MMCCILScrewdriving Insert Bits & Power BitsSteelPlainM4hex bit socket din 7422 chrome vanadium steel 6-pointinquire
    Contact_Supplier
MMCCILScrewdriving Insert Bits & Power BitsSteelPlainM4hex bit socket din 7422 chrome vanadium steel 6-point7
    Contact_Supplier
MMCCILMetal Drill BitsSteelPlainM4jobber drill din 338 chrome vanadium steel 6-point10
    Contact_Supplier
MMCCILMetal Drill BitsSteelM4 x 250jobber drill din 338 hss xlinquire
    Contact_Supplier
MMCCILMachine DiesSteelPlainM4 x .75round die din 223 hss xsinquire
    Contact_Supplier
MMCCILMachine DiesSteelPlainM4 x .7round die din 223 hss xs4
    Contact_Supplier
MMCCILMetal Drill BitsSteelPlainM4 x .7machine tap din 371 hss pluginquire
    Contact_Supplier
MMCCILMetal Drill BitsSteelPlainM4 x .7production tap din 376 hss plug4
    Contact_Supplier
MMCCILMachine TapsSteelPlainM4 x .7machine tap hss plaininquire
    Contact_Supplier
MMCCILMachine TapsSteelPlainM4 x .7fluteless machine tap din 460 hss bottominquire
    Contact_Supplier
MMCCILMetal Drill BitsSteelPlainM4counterbore din 373 hss hardened steel plaininquire
    Contact_Supplier
MMCCILMachine TapsSteelPlainM4 x .7volkel hex tap hss 4x.7 din 352ht class 10.9 plain310
    Contact_Supplier
MMCCILMilling Cutters (End Mills, Face Mills etc.)SteelPlainM44mm end mill din 327bm hss xs1
    Contact_Supplier
MMCCILMachine TapsSteelM4 x .5m4x.5 spiral point tap iso 51 hss bottom4
    Contact_Supplier
MMCCILMachine TapsM4 x .7m4x.7 sti bottom tap hssinquire
    Contact_Supplier
MMCCILMachine TapsM4 x .7m4x.7 sti spiral point tap hssinquire
    Contact_Supplier
MMCCILImpact Socket DriversSteelChrome PlatedM4a4mm power drive socket din 3129 chrome vanadium steel 6 pointinquire
    Contact_Supplier
MMCCILMetal Drill BitsM4m4mm drill blank din 338blk hssinquire
    Contact_Supplier
MMCCILMetal Drill BitsM4m4mm jobber drill din 338inquire
    Contact_Supplier
TSFTXMachine TapsM4-0.70bottom tap m4-.701
    Contact_Supplier
SonfastSCMachine TapsM4 x .70M4x.70 spiral pt plug tap ty 2114
    Contact_Supplier
OSSCORIScrewdriving Insert Bits & Power BitsM4M4 hex socket insert bit 1 long45
    Contact_Supplier
QFCTXMachine DiesSteelM4-0.704-0.70 carbon steel metric hex die2
    Contact_Supplier
QFCTXMachine DiesSteelM4-0.0.504-.0.50 carbon steel metric hex die2
    Contact_Supplier
IRFNJMetal Drill BitsM4hex bit for gun19
    Contact_Supplier
IRFNJAdapters, Arbors, & MandrelsM4M4 mandrel for cn/12 celus hand tool CN12-M49
    Contact_Supplier
TrifastTXSteelM4 x 6m4 x 6 hex hd h.t stl set z/cdebs7371 72hr cr31600
    Contact_Supplier
MTPCAMasonry & Concrete Drill BitsM4m4 hex bit long impactstock
    Contact_Supplier
MSTCMAReamer BitsM44 mm din 212 strght flute mach reamr hss1
    Contact_Supplier
MSTCMAMachine TapsM44 mm din 9 hnd taprd pin reamer-1 50 hss1
    Contact_Supplier
MSTCMAMilling Cutters (End Mills, Face Mills etc.)M44 mm cntr ctng r/h dbl end endmill cob1
    Contact_Supplier
MSTCMAMilling Cutters (End Mills, Face Mills etc.)M44 mm r/h sngle end 4 flute endmill hss1
    Contact_Supplier
MSTCMAMachine DiesM4 x 0.7m4x0.7 hss l.h. round adj die1
    Contact_Supplier
MSTCMAMachine TapsM4 x 0.75m4x0.75 hss ground thread starting tap1
    Contact_Supplier
MSTCMAMachine TapsM4 x 0.5m4x0.5 hss ground thread starting tap1
    Contact_Supplier
MSTCMAMachine DiesM4 x 0.5m4x0.5 hss round adjustable die1
    Contact_Supplier
MSTCMAMachine TapsM4 x 0.5m4x0.5 hss prec ground 3 pc tap set1
    Contact_Supplier
MSTCMAMachine TapsM4 x 0.35m4x0.35 hss ground thread plug tap1
    Contact_Supplier
MSTCMAMetal Drill BitsM44 mm din 338 long length drills hss2
    Contact_Supplier
MSTCMAMetal Drill Bits300 Stainless (A1,A2, 18-8,304,310 etc.)M44 mm jobbers length drill for st. st.2
    Contact_Supplier
MSTCMAMachine TapsM4 x 0.7m4x0.7 hss thread forming tap3
    Contact_Supplier
MSTCMAMachine DiesM4 x 0.5m4x0.5 hss l.h. round adj die3
    Contact_Supplier
MSTCMAMetal Drill BitsM44 mm din 338 l/h jobbers lngth drill hss4
    Contact_Supplier
MSTCMAMilling Cutters (End Mills, Face Mills etc.)M44 mm ctr ctng-r/h-sngl end-2 flute-end mill5
    Contact_Supplier
MSTCMAMachine TapsM4 x 0.7m4x0.7 hss spiral point gun tap2
    Contact_Supplier
MSTCMAMachine TapsM4 x 0.75m4x0.75 hss ground thread bottoming tap2
    Contact_Supplier
MSTCMAMachine TapsM4 x 0.7m4x0.7 hss spiral flute plug tap15
    Contact_Supplier
SRFALMachine DiesM4-0.70hex rethreading die nut-
    Contact_Supplier
THRDFASTFLMachine TapsM4-0.70bottom tap1
    Contact_Supplier
THRDFASTFLMetal Drill BitsM4h.s. jobber drill bit20
    Contact_Supplier
THRDFASTALMachine TapsM4-0.70taper tap3
    Contact_Supplier
THRDFASTFLMachine TapsM4-0.50nf plug tap2
    Contact_Supplier
THRDFASTFLMachine TapsM4-0.70taper tap1
    Contact_Supplier
THRDFASTALMachine DiesM4-0.70rethreading die nut1
    Contact_Supplier
All SizeTXMachine TapsM4 x 0.504mm x 0.50 metric plug tap1
    Contact_Supplier
All SizeTXMachine TapsM4 x 0.704mm x 0.70 metric spiral point tap16
    Contact_Supplier
All SizeTXMachine TapsM4 x .70m4 x .70 plug tap domestic4
    Contact_Supplier
Valley NuWAMetal Drill BitsM4hs jobber length drill bit5
    Contact_Supplier

Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.