M10 Bent Bolts (DIN 3570)
Bent Bolts can have any of a “U”, “V” or “J” shape and are usually used to keep piping or round shaft or conduit in place against the bend of the bolt. Each end of the bent bolts has a machine thread, and a nut washer combination is used to tighten the shaft against a flat surface.
6 results, (click on any line for more information)
Search Results Sponsored by Dale Fastener Supply, your source for Bent Bolts U,V,J. For more results, visit dalecompany.com | ||||||||
---|---|---|---|---|---|---|---|---|
Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
Buy Bent Bolts from one of our FCH Network Members | ||||||||
MMCC | IL | Bent Bolt (U, V, J) | Steel | Zinc/Clear | M10 x 38 | m10 x 38 u-bolt din 3570 steel zinc/clear | inquire |
|
MMCC | IL | Bent Bolt (U, V, J) | Steel | Zinc/Clear | M10 x 52 | m10x52 u bolt din 3570 steel zinc plate | inquire |
|
MMCC | IL | Bent Bolt (U, V, J) | 316, 317, A4 Stainless | Plain | M10 x 50 | m10x50 u bolt a4 din 3570 | inquire |
|
WDMB | IA | Bent Bolt (U, V, J) | Steel | Plain | M10 x 76 x 154 | bolt u (a3k) m10x154x76 drw din 3570 | 1,975 |
|
Aspen | PA | Bent Bolt (U, V, J) | Steel | Zinc/Clear | M10-1.50 x 30 | m10-1.5 x 30mm, din 3570 type-a, metric, u-bolts, steel, zinc plated (nominal diameter=30mm, pipe size=25.0mm-to-26.9mm, thread length=40mm, overall height=70mm, posts center to center=40mm) | 1,400 |
|
Aspen | PA | Bent Bolt (U, V, J) | Steel | Zinc/Clear | M10-1.50 x 52 | m10-1.5 x 52mm, din 3570 type-a, metric, u-bolts, steel, zinc plated (nominal diameter=50mm, pipe size=44.5mm-to-48.3mm, thread length=50mm, overall height=92mm, posts center to center=62mm) | 500 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.