FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| RePneu To | MI | USS Flat Washer | Grade 2 | Galvanized | 3/4 | 3/4 uss flat washers low carbon hdg | 427 |
|
| RePneu To | MI | F436 Round Structural Washer | Steel | Galvanized | 1/2 x 1 1/16 | 1/2 x1 1/16 f436 structural flat washers med. carbon hdg | 1786 |
|
| RePneu To | MI | F436 Round Structural Washer | Steel | Plain / Furnace Black | M16 | m16 f436m hardened flat washer med. carbon plain | 1250 |
|
| OneMonroe | NC | F436 Round Structural Washer | Steel | Plain / Furnace Black | 1 3/4 | 1-3/4 (sae) f436 flat washer | 33 |
|
| Weaver | WA | Split Lock Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M8 | 8 lock 18-8 ss | 204 |
|
| Weaver | WA | Split Lock Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M16 | 16 lock 18-8 ss | 84 |
|
| Jackson | MS | F436 Round Structural Washer | Steel | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 1 | 1 f436 structural f/w teflon coated xylan 1070 blue | 1 |
|
| Jackson | MS | Flat Washer | Steel | Galvanized | 5/8 | og | 37 |
|
| Jackson | MS | Flat Washer | Steel | Zinc/Clear | fail | 13 mm id x 30 mm od x 3 mm thick special washer zinc plated (m12 or equal) bn 737 | 50 |
|
| Jackson | MS | USS Flat Washer | Steel | Plain / Furnace Black | 1 | 1 USS flat 1 1/16 idx2 1/2 od 5.3/lb | 766 |
|
| OneMonroe | MN | Flat Washer | Plain / Furnace Black | plate ut10116zn asy | 8 |
| ||
| OneMonroe | NC | Bonded EPDM Sealing Washer | Steel | Galvanized | #10 | #10 galvanized bonded sealing washer | 75 |
|
| OneMonroe | NC | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | 1 1/4 | 1-1/4 zinc finish internal tooth lock washer | 300 |
|
| Weaver | WA | Split Lock Washer | Steel | Chrome Plated | 1/2 | 1/2 lock chrome | 13 |
|
| Weaver | WA | SAE Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #6 | #6 sae flat s 18-8 ss | 14181 |
|
| Weaver | WA | High Collar Split Lock Washer | Steel | Plain / Furnace Black | #5 | #5 hi collar lock plain | 100 |
|
| Weaver | WA | High Collar Split Lock Washer | Steel | Plain / Furnace Black | 3/8 | 3/8 hi collar lock plain | 588 |
|
| Weaver | WA | High Collar Split Lock Washer | Steel | Plain / Furnace Black | 1/2 | 1/2 hi collar lock plain | 9557 |
|
| Weaver | WA | Fender Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10 x 1 | #10x1 fender 18-8 ss | 788 |
|
| Weaver | WA | Tooth Lock Washer (Int. & Ext.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/2 | 1/2 internal lock 18-8 ss | 92 |
|
| Weaver | WA | Tooth Lock Washer (Int. & Ext.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/8 | 5/8 internal lock 18-8 ss | 113 |
|
| Weaver | WA | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | 1/4 | 1/4 int/external lock zinc | 2600 |
|
| GOEBEL | TX | Flat Washer | Steel | Plain / Furnace Black | flat washer for go-300 | 14 |
| |
| SRF | AL | Flat Washer | Nylon (Polyamide) | Plain / Furnace Black | .875 x 1.750 x .125 | .875 id 1.750 od .125 thk | - |
|
| SRF | AL | Split Lock Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/8 | lite split l/w s/s | - |
|
| SRF | AL | Flat Washer | Steel | Painted | .255 x .43 | oil impregnated bronze .255id .43 | - |
|
| SRF | AL | Flat Washer | Steel | Plain / Furnace Black | M42 | flat | - |
|
| IntScrew | FL | USS Flat Washer | Nylon (Polyamide) | Plain / Furnace Black | 1/4 | 1/4 uss flat black 6/6 nylon | 14900 |
|
| ACCURATE | IL | Flat Washer | Steel | Plain / Furnace Black | 5/8 x 2 1/2 x 1/4 | flat plate | 2 |
|
| ACCURATE | IL | USS Flat Washer | Steel | Zinc/Clear | 3/4 | flat -uss | 420 |
|
| ACCURATE | IL | Flat Washer | Steel | Plain / Furnace Black | 3/4 x 3 x 1/4 | flat plate | 34 |
|
| ACCURATE | IL | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | 7/16 | external tooth lock | 12890 |
|
| Jackson | MS | Machine Bushings | Steel | Zinc/Clear | 7/8 x 1 3/8 x 18 | 7/8 idx1 3/8 odx18 gauge machine bushing | 25 |
|
| YANKEE | NH | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | 1/4 x 5/8 x .045 .050 | 1/4 x 5/8 od x .045-.050tk flat washer 18-8 stainless steel w/black oxide finish | 518 |
|
| YANKEE | NH | Fender Washer | Steel | Zinc/Clear | 3/8 x 1 1/4 | 3/8 x 1-1/4 fender washer steel zinc plated | 2887 |
|
| YANKEE | NH | Two-Piece Wedge Lock Washer (Heico-Lock, Disc-Lock, etc.) | 316, 317, A4 Stainless | Plain / Furnace Black | M12 | m12 nord-lock 2pc wedge lock washer (19.5mm od) a4 type-316 stainless steel | 61 |
|
| YANKEE | NH | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | #6 .140 x .280 x .035 | #6 flatwasher.140id .280od .035tk s/s blk oxide | 5700 |
|
| Jackson | MS | Direct Tension Indicating (DTI) Washer | Steel | Galvanized | 7/8 | load indicating dti squirter | 68 |
|
| Jackson | MS | Flat Washer | Nylon (Polyamide) | Plain / Furnace Black | 5/16 x 1 1/4 | 5/16 od 1-1/4 bolt id 1/16 thick special | 15 |
|
| Jackson | MS | Bonded EPDM Sealing Washer | Steel | Galvanized | #12 x 1/2 | od bonded sealing weatherguard | 20 |
|
| Jackson | MS | Bonded EPDM Sealing Washer | Steel | Galvanized | #12 x 9/16 | od bonded sealing weatherguard | 19 |
|
| Jackson | MS | Countersunk Finishing Washer | Brass | Plain / Furnace Black | #4 | 92 |
| |
| Jackson | MS | SAE Flat Washer | Brass | Plain / Furnace Black | #16 | SAE flat | 40 |
|
| Jackson | MS | SAE Flat Washer | Brass | Plain / Furnace Black | 1/4 | (#16s) SAE flat | 180 |
|
| Jackson | MS | Conical Disc Spring Washer, Disc Spring, Belleville Washer | Steel | Plain / Furnace Black | .755 x 1.50 x .072 | .755 idx1.50 odx.072 tk belleville 1074 srping | 38 |
|
| Future Fastener | TX | Flat Washer | Galvanized | M8 | m8 flat washer hot dip galvanized din 125 | 634 |
| |
| Jackson | MS | Plate Washer (Square & Rect.) | Steel | Zinc/Yellow | .335 x .900 x .115 | .335 idx.900 odx.115 special | 1011 |
|
| Jackson | MS | Split Lock Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1 3/8 | lock 18-8 s/s | 21 |
|
| Jackson | MS | Flat Washer | Steel | Plain / Furnace Black | 5/8 x 8 | head drive spike area 2m | 224 |
|
| Jackson | MS | Flat Washer | Steel | Zinc/Clear | 5/8 x 10 | head drive spike area 2m | 50 |
|
| Jackson | MS | Flat Washer | Steel | Plain / Furnace Black | 5/8 x 11 | head drive spike area 2m | 449 |
|
| SII | IN | Fender Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/16 x 1.250 | 5/16x1.250 18-8 s/s steel fender ) | 1400 |
|
| FTS | OH | Plate Washer (Square & Rect.) | Steel | Plain / Furnace Black | 1 | 10mm swagelok 1p adhesive nameplate print | 1936 |
|
| FTS | OH | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | M10 | external tooth l/w serrated stl zn/ni/clr din 6798a | 6000 |
|
| FTS | OH | High Collar Split Lock Washer | Steel | Plain / Furnace Black | M10 | high collar l/w stl din 7980 | 374 |
|
| FTS | OH | High Collar Split Lock Washer | Steel | Zinc/Clear | M10 | high collar l/w stl zn din 7980 | 50 |
|
| FTS | OH | Tooth Lock Washer (Int. & Ext.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M10 | external tooth l/w a2 ss din 6797a | 500 |
|
| FTS | OH | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | M10 | external tooth l/w stl zn din 6797a | 200 |
|
| FTS | OH | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | M10 | internal tooth l/w stl zn din 6797j | 600 |
|
| FTS | OH | Split Lock Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M10 | med split lw a2 ss din 127b | 2030 |
|
| FTS | OH | Split Lock Washer | Steel | Plain / Furnace Black | M10 | med split lw stl din 127b | 1237 |
|
| FTS | OH | Split Lock Washer | Steel | Plain / Furnace Black | M10 | med split lw stl din 127b | 500 |
|
| FTS | OH | Split Lock Washer | Steel | Zinc/Clear | M10 | med split lw stl zn/ni/clr din 127a | 486 |
|
| FTS | OH | Split Lock Washer | Steel | Zinc/Yellow | M10 | med split lw stl zy din 127b | 50 |
|
| FTS | OH | Split Lock Washer | Steel | Zinc/Clear | M10 | med split lw stl zn din 127b | 15050 |
|
| FTS | OH | Conical Ribbed Safety Washer (Schnorr) | Steel | Zinc/Clear | M10 | ribbed l/w spring stl zn bn 792 | 6625 |
|
| FTS | OH | Flat Washer | Steel | Phosphate | M10 | f/w stl blk phos din 433 | 314 |
|
| FTS | OH | Flat Washer | Steel | Plain / Furnace Black | M10 f/w bn 80062 stl | 1500 |
| |
| FTS | OH | Flat Washer | Steel | Plain / Furnace Black | M10 | f/w stl din 125a | 2062 |
|
| FTS | OH | Flat Washer | Steel | Plain / Furnace Black | M10 | f/w tp 200 stl din 125a | 587 |
|
| FTS | OH | Flat Washer | Steel | Zinc/Clear | M10 | f/w stl zn din 125a | 3000 |
|
| FTS | OH | Flat Washer | Steel | Zinc/Clear | M10 | f/w stl zn din 126 | 400 |
|
| Jackson | MS | SAE Flat Washer | Grade 9 | Zinc/Yellow | 1 1/8 | l-9 SAE tension flat & cr+3 (usa) | 4 |
|
| Jackson | MS | Direct Tension Indicating (DTI) Washer | Steel | Galvanized | 7/8 | load indicating classic | 382 |
|
| Jackson | MS | SAE Flat Washer | 316, 317, A4 Stainless | Plain / Furnace Black | 1/4 | SAE pattern flat 316 stainless | 1654 |
|
| Jackson | MS | SAE Flat Washer | Steel | Electrolytic Zinc Basecoat + Topcoats (Climacoat, Climaseal, etc.) | 1/2 | SAE flat dacromet | 11095 |
|
| Jackson | MS | Square Washer (Flat & Curved) | Steel | Galvanized | 5/8 x 1/4 x 3 | thk square | 125 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
