FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Shadran I | Slotted Spring Pin (Roll Pin) | Plain | 5/32 x 3/4 | 5/32x3/4 roll pin | 33 |
| ||
| OneMonroe | NC | Fully Threaded Stud (All Thread) | Steel | Plain | 3/4-10 x 4 3/4 | 3/4-10 x 4 3/4 full thread stud | 9 |
|
| OneMonroe | NC | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B7 | Plain | 3/4-10 x 5 | 3/4-10 x 5 a193 b7 hvy hex bolt | 20 |
|
| OneMonroe | NC | Set Screw (Square Head) | Steel | Plain | 3/4-10 x 5 1/2 | 3/4-10 x 5-1/2 sq hd set screw | 25 |
|
| OneMonroe | NC | Fully Threaded Stud (All Thread) | Grade B7 | Zinc/Clear | 3/4-10 x 6 | 3/4-10 x 6 stud zinc plated b7 | 30 |
|
| OneMonroe | NC | Set Screw (Socket Head) | Steel | Plain | 3/4-10 x 5/8 | 3/4-10 x 5/8 soc set-cup pt | 50 |
|
| OneMonroe | NC | Hex Head Cap Screw | Grade 2 | Plain | 3/4-10 x 6 1/2 | 3/4-10 x 6 1/2 hex cap screw grade 2 | 100 |
|
| OneMonroe | NC | Fully Threaded Stud (All Thread) | Grade B7 | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 3/4-10 x 4 1/2 | 3/4-10 x 4 1/2 a193 b7 stud only blue fluoro #1 | 3 |
|
| OneMonroe | NC | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 3/4-10 x 7 | 3/4-10 x 7 sae gr 8 hx c/s zinc-yellow | 20 |
|
| OneMonroe | NC | Threaded Rod | Steel | Galvanized | 3/4-10 x 6 | 3/4-10 x 6 ft threaded rod stl hotdipgalv | 2 |
|
| OneMonroe | NC | Socket Head Cap Screw | Steel | Plain | 3/4-10 x 3/4 | 3/4-10 x 3/4 socket cap screw | 15 |
|
| OneMonroe | NC | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 3/4 | 3/4-10 x 3/4 soc set cup pt 18-8ss | 100 |
|
| OneMonroe | NC | Hex Head Cap Screw | Grade 2 | Plain | 3/4-10 x 7 | 3/4-10 x 7 hex cap screw grade 2 | 4 |
|
| OneMonroe | NC | Threaded Rod | Steel | Plain | 3/4-10 x 72 | 3/4-10 x 72 all thread rod | 20 |
|
| OneMonroe | NC | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 8 1/2 | 3/4-10 x 8 1/2 hex cap screw stainless | 4 |
|
| OneMonroe | NC | Set Screw (Socket Head) | Ni-Cu Alloy (Monel, K-Monel, etc.) | Plain | 3/4-10 x 7/8 | 3/4-10 x 7/8 soc set cup pt patch monel | 3 |
|
| OneMonroe | NC | Cast-In-Place Concrete Insert Anchors | Steel | Plain | 3/4-10 | 3/4-10 wood-knocker inserts (purple) | 120 |
|
| OneMonroe | NC | Machine Taps | Steel | 3/4-10 | 3/4-10 bottom tap | 2 |
| |
| OneMonroe | NC | Set Screw (Socket Head) | Steel | Plain | 3/4-10 x 3/4 | 3/4-10 x 3/4 soc set-cup pt | 2 |
|
| OneMonroe | NC | Finished Hex Nut | Grade 8 | Plain | 3/4-10 | 3/4-10 hex finish nut domestic gr 8 | 600 |
|
| OneMonroe | NC | Finished Hex Nut | Steel | Zinc/Clear | 1/8 x 41/64 | 3/4-10 fin hex nut 1 1/8 x 41/64 stl zncyl | 15 |
|
| Century | FL | Hex Head Cap Screw | Grade 8 | Zinc/Clear | 5/8-11 x 2 1/2 | 5/8-11 x 2 1/2 hex hd cap screw grade 8 zi plt | 25 |
|
| Century | FL | Socket Head Cap Screw | null | Plain | M50.0 | m 6.0 50.0mm grd 12.9 socket hd cap screws din 912 | 400 |
|
| Century | FL | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | M3.5 x 8 | m3.5 x 8 pozi pan taptite rohs steel zinc clear din 7500c | 1355 |
|
| Century | FL | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 1/4-20 x .688/.656 | 1/4-20 x .688/.656 hex c/s grd 8 z/y hole in hd special | 600 |
|
| Olander | CA | Handles | plast hand whl w/folding handle () () | 1 |
| |||
| Olander | CA | Flat Head Socket Cap Screw | 316, 317, A4 Stainless | Zinc/Clear | 1/4-20 x 1/2 flat soc 316 sst rohs | 25 |
| |
| Olander | CA | Round Spacer | Steel | Plain | spacer | 300 |
| |
| Olander | CA | Machine Screw | Steel | Zinc/Clear | 6-32 x 3/8 slot flat stl zn non-rohs | () | 6550 |
| |
| Olander | CA | Electrical Lugs & Terminals | solder lug | 513 |
| |||
| Olander | CA | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 1 1/8 | 8-32 x 1 1/8 soc set cup pt sst rohs () () | 84 |
|
| Olander | CA | Machine Screw | Steel | Zinc/Clear | 6-32 x 5/16 slot fill stl zn non-rohs | 3770 |
| |
| Olander | CA | Round Female/Female Standoff | Aluminum | Plain | #8-32 x 1 1/2 x 1/4 | 8-32x1 1/2x1/4 rd fem standofff alum () | 6043 |
|
| Olander | CA | Cable Clamps & Ties | richco screw mount tie holder | 19 |
| |||
| GLF | OH | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M16-2.00 x 60 | m16-2 x 60 hhcs cl 8.8 stl zc din 931 | 74 |
|
| GLF | OH | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #2-56 x 9/16 | 2-56 x 9/16 shcs 18-8 ss dfars | 1100 |
|
| GLF | OH | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Cadmium | #4-40 | 4-40 lock nut steel cad ii plating | 80 |
|
| GLF | OH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 x 3/16 | #4-40 x 3/16 slotted pan hd m/s 18-8 s/s | 12783 |
|
| GLF | OH | Weld Nut | Plain | 5/8-11 | 5/8-11 sq weld nut 4 proj w/pilot pln | 11005 |
| |
| GLF | OH | Socket Head Cap Screw | null | Plain | 3/8-16 x 5 | 3/8-16 x 5 shcs stl pln | 168 |
|
| GLF | OH | Wire Lock Pin (Snapper Pin) | Steel | Zinc/Clear | 1/4 x 2 1/2 | 1/4 x 2-1/2 sq snap pin 2 wire stl zc | 75 |
|
| GLF | OH | Plate Nut (Nutplate, Floating Anchor Nut) | Plain | #10 | ms21075l3n | 20 |
| |
| Hayes | CA | Tapered Pin | Ni-Cu Alloy (Monel, K-Monel, etc.) | Plain | 6 x 3 | 6 x 3 taper pin monel | 205 |
|
| Hayes | CA | Machine Screw | Steel | Zinc/Clear | #6 x 1/2 | #6 x 1/2 unslotted hex a/ab zinc | 2900 |
|
| Hayes | CA | Sems Machine Screw | Steel | Zinc/Clear | #6 x 5/16 | #6 x 5/16 unslt hex wshr a/ab zinc | 3900 |
|
| Hayes | CA | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 5/8-18 x 4 | 5/8-18 x 4 hex c/s gr 5 zinc | 70 |
|
| Hayes | CA | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1/2-20 x 6 | 1/2-20 x 6 hex c/s gr 5 zinc | 55 |
|
| Brikksen | FL | Machine Screw | Plain | 5/16-18 x 3 1/2 | 5/16-18 x 3-1/2 flat 82 degree | -291 |
| |
| Hayes | CA | Hex Head Cap Screw | Grade 5 | Plain | 3/4-16 x 4 1/4 | 3/4-16 x 4 1/4 hex c/s gr 5 pln | 21 |
|
| Hayes | CA | Machine Screw | Steel | Zinc/Clear | #10-24 x 3 1/2 | 10-24 x 3 1/2 phil round m/s zinc | 480 |
|
| Hayes | CA | Hex Head Cap Screw | Aluminum | Plain | 3/8-16 x 2 | 3/8-16 x 2 hex c/s alum | 264 |
|
| Hayes | CA | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1/2-20 x 5 | 1/2-20 x 5 hex c/s gr 5 zinc | 469 |
|
| Hayes | CA | Wood Screw | Steel | Zinc/Clear | #8 x 1 1/2 | #8 x 1 1/2 phil oval w/s zinc | 1980 |
|
| Hayes | CA | Wood Screw | Steel | Zinc/Clear | #6 x 3/4 | #6 x 3/4 phil flat w/s zinc | 63887 |
|
| NutsBolts | NE | Hex Head Cap Screw | Steel | Zinc/Yellow | 7/16-20 x 1 1/2 | 7/16-20 x 1 1/2 hcs zy8 | 505 |
|
| NutsBolts | NE | Hex Head Cap Screw | Steel | Zinc/Yellow | 7/16-20 x 1 3/4 | 7/16-20 x 1 3/4 hcs zy8 | 1182 |
|
| NutsBolts | NE | Hex Head Cap Screw | Steel | Zinc/Yellow | 7/16-20 x 2 | 7/16-20 x 2 hcs zy8 | 277 |
|
| NutsBolts | NE | Hex Head Cap Screw | Steel | Zinc/Yellow | 7/16-14 x 2 1/2 | 7/16-14 x 2 1/2 hcs zy8 | 433 |
|
| NutsBolts | NE | Hex Head Cap Screw | Steel | Zinc/Yellow | 7/16-14 x 2 3/4 | 7/16-14 x 2 3/4 hcs zy8 | 992 |
|
| Komar | TN | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 3/4 | 5/16-18 x 3/4 hex cap screw 18-8 ss |
| |
| Komar | IL | Hex Head Cap Screw | Steel | Zinc/Clear | 1/4-20 x 1 1/4 | 1/4-20 x 1 1/4 hex cap screw zinc |
| |
| Centennia | CO | Finished Hex Nut | Galvanized | 1/4-20 | 1/4-20 hex finish nut hdg | 100 |
| |
| Centennia | CO | Lag Screw Expansion Shields Anchor | Plain | 5/8 | 5/8 long lag shield | 24 |
| |
| Kanebridge | IL | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Zinc/Clear | 1/4-14 x 2 | 1/4-14x2 phillips pan full thread sds zc nc bk 1000hr self-drilling screws | 10000 |
|
| Optimas | IL | Finished Hex Nut | Class 9.8 | Phosphate | M12-1.75 | m12x1.75 hex nut class 9 phos & oil per drawing (p) | 323 |
|
| SWACO | OH | Self-Clinching Standoff | Plain | sos-032-32 pem spec standoff | 52 |
| ||
| SWACO | OH | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain | nut plate self-locking floating replaceable nut | 60 |
| |
| SWACO | OH | Broaching Style Threaded Insert (Press-Nut, Swage Nut) | Plain | kfs2-440-d spec pem pcn nut dfars | 36597 |
| ||
| SWACO | OH | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 1/2 | 10-24 x 1/2 fhcs 18-8 | 2000 |
|
| SWACO | OH | Machine Screw | Steel | Plain | phillips pan m/s aluminum ms35218-28 | 40 |
| |
| SWACO | OH | Flat Washer | 316, 317, A4 Stainless | Plain | 5/8 flatwasher 316 1 1/2 o.d. | 113 |
| |
| SWACO | OH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 3/8 | 10-32 x 3/8 phillips flat m/s 100 deg s/s ms24693-c270 | 4871 |
|
| SWACO | OH | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain | 3585-4cnw500 heli-coil insert | 1352 |
| ||
| SWACO | OH | Hex Machine Bolt | Steel | Plain | 3/8-16 x 3/4 | 150-2510 spec hex bolt 3/8-16x3/4 l-h elctro tin | 20 |
|
| Accutite | CA | Internal Type HO Retaining Ring | Brass | Zinc/Clear | 0.45 | brass ring .817 id . 875 od . 0.45 long per print 260 alloy brass rohs compliant | 800 |
|
| BoltCraft | NE | Single End Stud | Plain | 1-8 x 18 | 1-8 x 18 single end stud 1541 plain finish with 2.88 of thread | 54 |
| |
| AIH | AZ | O-Rings & Quad Ring Seals (X-Rings) | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | o-ring black fluorocarbon | 5400 |
| ||
| BoltCraft | NE | Straight Anchor Bolt | Steel | Plain | 7/8 x 16 | 7/8 x 16 long x 3 thread 90 degree anchor bolt for valley pivots with nut and washer | 96 |
|
| NBS | IL | Dowel Pin | Steel | Plain | 1/16 x 1/4 | 1/16x1/4 dowel pin 0.0008 over size alloy bright finish (taiwan) | 10000 |
|
| NBS | IL | Dowel Pin | Steel | Plain | M20 x 100 | M20x100 dowel pin-alloy-bright finish (taiwan) [m6 spec] din 6325 | 25000 |
|
| Field Fas | IL | anvil bobtail (5/8 & 16mm) | 24 |
| ||||
| OneMonroe | MN | Hinges | 5/8 | 5/8 radius hinge-08-3777 sold each | 147 |
| ||
| OneMonroe | MN | Conical, Ribbed, Fluted Light Duty Plastic Anchor | Nylon (Polyamide) | Plain | .875 | mcmaster carr 9688k291 nylon finish plug hole .875 | 50 |
|
| OneMonroe | MN | Machine Screw | Steel | Zinc/Black | 1/4-20 x 3/8 | 1/4-20 x 3/8 ms phil/pan-steel/zinc black | 472 |
|
| OneMonroe | MN | Sprockets | Plain | 1 | 35b sprocket 1 finished bore 27 hardened teeth | 26 |
| |
| OneMonroe | MN | Socket Head Cap Screw | Class 12.9 | Plain | M10 x 55 | m10 x 55m shc 12.9 sc-1 coated | 30 |
|
| OneMonroe | MN | Cotter Pin (Split Pin) | Steel | Zinc/Yellow | 1/4 x 3 1/2 | 1/4 x 3 1/2 cotter pin zy | 200 |
|
| OneMonroe | MN | Slotted Spring Pin (Roll Pin) | Steel | Zinc/Clear | 3/8 x 1 1/4 | 3/8 x 1 1/4 rollpin plated | 38 |
|
| OneMonroe | MN | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 x 1 1/2 | 1/2-13 x 1-1/2 skt hd c/s-s.s. | 20 |
|
| OneMonroe | MN | Round Female/Female Standoff | Plain | 1 1/8 | 1-1/8 sq.bore disk harrow b/brg l3seal standoffd | 17 |
| |
| OneMonroe | MN | Hinges | Brass | 1/2 x 72 | pin hinge 1/2 x 72 brass | 26 |
| |
| OneMonroe | MN | sheet, diaphragm trelleborg bn 5039 .025 thk x 58 wide | 2 |
| ||||
| OneMonroe | MN | Hex Tap Bolt (Fully Threaded) | Grade 8 | Plain | 5/16-18 x 5 | 5/16-18 x 5 grade 8 plain tap bolt | 100 |
|
| OneMonroe | MN | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 1 | 10-24 x 1 soc cs efi 18-8ss bkps | 100 |
|
| OneMonroe | MN | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #2-56 x 1/4 | screw mach 2-56x1/4 phil/flat 100deg s/s | 625 |
|
| OneMonroe | MN | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 3/4-10 x 4 | 3/4-10 x 4 yellow zinc finish sae j429 grade 8 hex cap screw made in usa | 10 |
|
| OneMonroe | MN | asmco 3609-ss-1 | 200 |
| ||||
| OneMonroe | MN | External Thread Insert, Self-Tapping Insert | Plain | M10-1.50 x 3.8 | m10 x 1.5 x 3.8 threaded insert | 129 |
| |
| Alma Bolt | MI | Rivet Installation Tools & Accessories | Plain | 5/16-18 | 5/16-18 expendable rivet nut tool | 9 |
| |
| Alma Bolt | MI | Slotted Spring Pin (Roll Pin) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/32 x 2 | 5/32 x 2 st. st. spring roll pin | 650 |
|
| Alma Bolt | MI | Self-Tapping Sheet Metal Screw (types a,b,ab) | Plain | #6 x 3/8 | #6 x 3/8 pan slotted type-a sms | 66700 |
| |
| Alma Bolt | MI | Step Bolt | Steel | Plain | 1/4-20 x 1 | 1/4-20 x 1 step bolt | 2014 |
|
| Alma Bolt | MI | Pipe Tee | Brass | 1/2 x 3/8 | #pp72f 1/2 x 3/8 brass pipe tee male pipe | 3 |
| |
| Alma Bolt | MI | Hex Head Cap Screw | Grade 5 | Plain | 3/4-10 x 6 1/2 | 3/4-10 x 6 1/2 grade 5 hex head cap screw | 162 |
|
| E-Z LOK | CA | External Thread Insert, Self-Tapping Insert | e-z coil threaded insert for metal-m7-1.0x1.5d | 1409 |
| |||
| Optimas | IL | Lock Nut, Flange, w/o serrations | Grade F | ASTM F1941-10 Fe/Zn-Ni | 5/8-18 | 5/8-18 ifi 100/107 hex flange top lock nut gr f zinklad250/ elv1500/tnt15 (i) | 390 |
|
| Optimas | IL | Flat Washer | Rubber, Buna-N, Neoprene etc. | Plain | .355 x .812 x .078/.108 | 3/8 flat washer rubber .355 x .812 x .078/.108 | 1000 |
|
| Optimas | IL | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Zinc/Clear | M16-2.00 x 130 | M16-2x130 hvy hex flange scr cl 10.9 zinc triv.0003 120/144 hr per dwg rohs (p) | 4080 |
|
| Optimas | IL | Key Stock | Grade 8 | 3/16 x 1.000 | 3/16 x 1.000 square key stock alloy per drawing (p) | 500 |
| |
| Hybroco S | MI | Self-Tapping Self-Drilling Screw (Tek etc.) | Rubber, Buna-N, Neoprene etc. | Plain | #12-14 x 3 | #12-14 x 3 hwh s/d/s #3pt hwh zn w/epdm | 12150 |
|
| Empower H | IL | External Type SH Retaining Ring | 316, 317, A4 Stainless | Plain | 24 | 2450ss-1132stainless steel spring snapgrade 316size (wire diameter) 11/32 9mmoverall length 3-9/16 opening size 7/16 working load limit (lbs) 300 | 138 |
|
| Empower H | IL | Lifting Hooks, Rings & Snaps (Slip Hooks, Snap Shackles, etc.) | Steel | Nickel Plated | 22434swivel eye snapsnickel plated overall length 3-3/8 eye size 3/4 snap opening 3/8 | 100 |
| |
| IndexFast | CA | wt 150190xhand tool for pt190007 & pt050011 | inquire |
| ||||
| AFT Faste | TX | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M6-1.00 x 80 | M6-1.00x80 / iso 4017 hex cap screws 8.8 coarse med. carbon zinc cr+3 din 933 | 450 |
|
| AFT Faste | TX | Quick Access Panel Fasteners (1/4 Turn etc.) | M4 x 17 | M4x17 captive screw per print | 20 |
| ||
| Coburn Myers Fastening Systems | PA | Button Head Socket Cap Screw | Class 12.9 | Plain | button head socket cap screw class 12.9 plain | 900 |
| |
| Coburn Myers Fastening Systems | PA | Finished Hex Nut | Grade 5 | Plain | finished hex nut grade 5 plain | 328 |
| |
| Coburn Myers Fastening Systems | PA | Split Lock Washer | Steel | Zinc/Clear | split lock washer carbon steel zinc/clear | 2841 |
| |
| Coburn Myers Fastening Systems | PA | Flat Washer | 316, 317, A4 Stainless | Plain | flat washer 316 stainless plain | 62 |
| |
| FasSpcMfg | FL | Shoulder Bolt (Stripper Bolt) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8 x 2 (1/4-20) | 3/8 x 2 socket shoulder bolt 18-8 stainless 1/4-20 thread | 3 |
|
| FasSpcMfg | FL | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain | 5/8-11 x 1 | 5/8-11 x 1 low head socket cap 316 stainless | 29 |
|
| FasSpcMfg | FL | Dowel Pin | Ni-Cu Alloy (Monel, K-Monel, etc.) | Plain | 3/8 x 1 | 3/8 x 1 (.3751/.3753) dowel pin ni-cu 400 material missing in setup | 2 |
|
| FasSpcMfg | FL | Sockets | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | 1/4-20 x 1 | 1/4-20 x 1 socket set cup point inconel 600 | 3 |
|
| OneMonroe | MA | Concrete/Masonry Screw (Tapcon, Titen etc.) | Steel | Plain | 3/16 x 1 3/4 | tapper+ hwh 3/16 x 1 3/4 | 1200 |
|
| OneMonroe | MA | Electrical Lugs & Terminals | 16-14 | 16-14 #10 flanged spade term-ins-reel | 1500 |
| ||
| Irwin Ind | Ont | USS Flat Washer | Steel | Zinc/Clear | 7/8 | 7/8 uss flat steel zinc trivalent clear b18.22.1 | 100 |
|
| Longhorn | TX | Hex Head Cap Screw | Steel | Galvanized | 1/2-13 x 3 | 1/2-13 x 3 hex cap screw domestic g | 11 |
|
| Raw Produ | NJ | Machine Screw | Silicon Bronze | Plain | 1/2-13 x 6 | slotted flat head ms silicon bronze 1/2-13 x 6 | 500 |
|
| Raw Produ | NJ | Strut Systems (Channels, Clamps, Hangers, etc.) | Galvanized | 7/8 x 10 | strut hdg 7/8 x 10 | 500 |
| |
| Raw Produ | NJ | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-24 x 2 3/4 | hex cap screws 304 ss 3/8-24 x 2-3/4 | 343 |
|
| Raw Produ | NJ | Lag Screw | Steel | Zinc/Clear | 1/4-10 x 1 1/2 | hex lag screws zinc 1/4-10 x 1-1/2 | 2621 |
|
| Raw Produ | NJ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6 x 30 | metric phillips flat head ms a2 ss m6 x 30m | 1339 |
|
| Raw Produ | NJ | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M12 | metric socket set screw a2 ss 12m x 1.75 x 40m | 159 |
|
| Raw Produ | NJ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 1 | phillips truss head ms 304 ss #10-24 x 1 | 414 |
|
| Raw Produ | NJ | Weld Nut | Steel | Plain | #10-24 | spot weld nuts single tab with target-#10-24 | 500 |
|
| Raw Produ | NJ | Hex Head Cap Screw | Grade 8 | Plain | 7/16-14 x 5 1/2 | hex cap screws grade 8 7/16-14 x 5-1/2 pt | 114 |
|
| Raw Produ | NJ | Tooth Lock Washer (Int. & Ext.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | #12 | internal tooth lock washers 410 ss #12 | 3947 |
|
| Raw Produ | NJ | Machine Screw | Brass | Plain | #6-32 x 1 3/4 | brass slotted flat head ms #6-32 x 1-3/4 | 51 |
|
| Raw Produ | NJ | SAE Flat Washer | Steel | Zinc/Clear | 5/16 | flat washers zinc sae 5/16 | 29898 |
|
| Mil-Spec | MD | Cotter Pin (Split Pin) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/32 x 3 | 3/32 x 3 cotter pin 18-8 stainless plain | 10000 |
|
| AEROSPCE | MN | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain | heli-coil only | 1000 |
| ||
| AEROSPCE | MN | r2-0268-02 southco receptical/southco | 7 |
| ||||
| F. Solutions | OH | Flat Head Socket Cap Screw | Steel | Plain | 5/16-24 x 3/4 | flat socket head cap screw 5/16-24(unf)x3/4 alloy | 14 |
|
| F. Solutions | OH | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain | M45912/2-010FG8Z | 10 |
| |
| F. Solutions | OH | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 18.8 | button socket head cap screw 5/16-24(nf) x 1 18.8 ss | | 175 |
|
| Mansco | MI | Machine Screw | Steel | Zinc/Clear | m5-0.8 x 70mm flat phil m/s triv znc | 1282 |
| |
| Mansco | MI | Clevis Pin | Steel | Black Oxide | 3/16 x 1 | 3/16 x 1 grooved clevis pin blk ox case hardened | 771 |
|
| Mansco | MI | Heavy Hex Nut | Grade 2H | Galvanized | 5/8-11 | 5/8-11 hvy hex structural nut a194 2h hot dip galv w/wax | 900 |
|
| Hodell | OH | 3/4-16 x 1-1/2 threaded collar holo-chrome | | 5 |
| ||||
| AFI | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3 x 6 | m3x6 phil flat ms ss din 965a () | 3592 |
|
| AFI | FL | Split Lock Washer | 316, 317, A4 Stainless | Plain | 1/4 | 1/4 med split lock washer 316 ss () () | 18117 |
|
| AFI | FL | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | #8-32 x 1/2 | 8-32x1/2 slotted hex wash hd type-f st zn () () | 19963 |
|
| AFI | FL | Hex Male/Female Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | 1/4 | 1/4 hex male female standoff ss pass (RAF) () | 28975 |
|
| Global Fa | TX | Sems Machine Screw | Steel | Zinc/Clear | M3 x 8 | m3x8 phillips pan sems splitlock & flat zinc 2 | 215 |
|
| AFI | FL | dzus dart receptacle front load southco d1-004-912-010 | 5 |
| ||||
| AFI | FL | fast lead receptacle medium size southco 12-11015-13 | 10 |
| ||||
| Mansco | MI | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 1/2 soc set scr cup pt 18-8 s.s. | 15000 |
| |
| F. Solutions | OH | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | socket head cap screw 10-32 x 2-3/4 18.8 | 22 |
| |
| SPC | TX | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain | 3/4-16 | 3/4-16 light hex full height flexslot steel plain | 2835 |
|
| Komar | IL | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain | 3/8-16 x 3/8 | 3/8-16x3/8 socket cap screw 316 ss | 120 |
|
| FTS | OH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 2 1/4 | fillister slotted m/s 18-8ss | 6000 |
|
| FTS | OH | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | #8-32 x 1/2 | 8-32x1/2hwh unslotted tfs swageform stl | 32000 |
|
| Arden | WI | Socket Head Cap Screw | Steel | Plain | #8-32 x 3/8 | 832x3/8 hxsoc cs w/pat | inquire |
|
| BHAM | TX | Heavy Hex Nut | Grade 2H | Galvanized | 1 3/4-5 | 1 3/4-5 a194 grade 2h hvy hex nut hdg b18.2.2 b18.2.6 | 6 |
|
| BAYFASTCO | FL | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Galvanized | 7/8-9 x 6 | 7/8-9x6 a325-1 hot str/b | 85 |
|
| THRDFAST | MS | U-Bolt | Steel | Plain | #-6031 | #g-6031 strut back to back u-bolt clamp | 1 |
|
| THRDFAST | FL | 1/4 hex quick change driver | 1 |
| ||||
| THRDFAST | AL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 x 1 3/4 | 18-8 ss socket c/s b18.2.1 b18.3 | 63 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B7 | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 3/4-10 x 11 1/4 | astm a193 b7 all thread stud teflon blue | 342 |
|
| Lightning | LA | Heavy Hex Nut | Grade A | Galvanized | 3-4 | astm a563 gr. a heavy nut hot dipped | 7 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
