FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| RePneu To | MI | Weld Nut | Steel | Plain / Furnace Black | 1/4-20 | 1/4-20 hex weld nut short pilot 3 projections plain steel | 2500 |
|
| RePneu To | MI | Weld Nut | Steel | Plain / Furnace Black | 3/8-16 | 3/8-16 hex weld nut short pilot 3 projections plain steel | 1500 |
|
| RePneu To | MI | Weld Nut | Plain / Furnace Black | M8 x 1.25 | m8x1.25-6h spot weld nut single tab | 1402 |
| |
| RePneu To | MI | Lock Nut, Nylon Insert | Grade 2 | Zinc/Clear | 7/8-9 | 7/8-9 unc ne (standard) nylon insert locknuts coarse low carbon zinc cr+3 | 250 |
|
| RePneu To | MI | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Class 10.9 | Zinc/Clear | M12-1.75 | m12-1.75 hex cone locknut class 10 med. carbon zinc & wax cr+3 din 980v wax | 315 |
|
| RePneu To | MI | Lock Nut, Nylon Insert | Grade 2 | Zinc/Clear | 9/16-12 | 9/16-12 unc ne (standard) nylon insert locknuts coarse low carbon zinc cr+3 | 50 |
|
| RePneu To | MI | Heavy Hex Nut | Grade 2H | Galvanized | 1 1/4-7 | 1 1/4-7 heavy metal keg hdg/wax/blue dye hex nuts a194/sa194 2h heavy hdg/wax/blue dye (metal keg) | 270 |
|
| RePneu To | MI | Finished Hex Nut | Grade 5 | Zinc/Clear | 3/8-16 | 3/8-16 finished hex nuts grade 5 coarse med. carbon zinc cr+3 | 4577 |
|
| RePneu To | MI | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain / Furnace Black | lock nut | 1 |
| |
| TownCountry | AR | Acme Thread Nut | Plain / Furnace Black | 1-6 | 1-6 hex nut acme plain | 20 |
| |
| OneMonroe | NC | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain / Furnace Black | #8-32 | nut self-locking 8-32 | 73 |
|
| OneMonroe | NC | Hex Jam Nut | Steel | Zinc/Clear | 1 1/8-7 | 1-1/8-7 finished hex jam nut-zp | 25 |
|
| OneMonroe | MN | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Plain / Furnace Black | nut self-locking hexagon-regular height 450 deg. f 125 ksi ftu | 240 |
| ||
| OneMonroe | MN | Cap Nut (Acorn Nut) | Plastic | Plain / Furnace Black | 1/2-13 x 2 13/16 | caster swivel threaded stem stm sz 1/2-13unc x 2-13/16 wheel sz 5 x 1-1/4 wheel mat gray thermoplastic rubber bearing precision w/full thread guard top lock brake load ht 6-1/8 load cap 280 lbs temp rt-40 to +180 f | 20 |
|
| Jackson | MS | Knurled Nut (Thumb Nut) | Brass | Plain / Furnace Black | #10-24 | 10-24 nc knurl nut brass | 9 |
|
| Jackson | MS | Lock Nut, Nylon Insert | Class 8.8 | Zinc/Clear | M33-2.00 | m33 x 2.00 fine pitch metric nyloc insert locking nut class 8 zinc plated 50mm waf x 33mm tall iso 10511 din 985 | 3 |
|
| TownCountry | AR | Finished Hex Nut | Class 10.9 | Zinc/Yellow | M10-1.25 | m10-1.25 hex nut 10.9 yellow zinc | 168 |
|
| OneMonroe | MN | T-Nut (Tee Nut) | Steel | Plain / Furnace Black | 1/4-20 | 1/4-20 plain 3 pronged t nut steel plain | 1500 |
|
| OneMonroe | NC | Heavy Hex Nut | Grade 2H | Galvanized | 1-8 | 1-8 hot dipped galv 2h hex nut | 1 |
|
| OneMonroe | MN | Weld Nut | Steel | Plain / Furnace Black | M12 | m12 hex weld nut long pilot 3 projections locking steel plain | 900 |
|
| Jackson | MS | Slotted Hex Nut | Steel | Zinc/Clear | M6-1.00 | m6 x 1.00 fine hex slotted nut zinc | 50 |
|
| Jackson | MS | Knurled Nut (Thumb Nut) | Brass | Plain / Furnace Black | #8-32 | 8-32 nc knurl nut brass | 48 |
|
| TownCountry | AR | Lock Nut, Nylon Insert | Class 8.8 | Zinc/Yellow | M12-1.75 | m12-1.75 nylon insert locknut ne 8.8 yellow zinc | 316 |
|
| Jackson | MS | Coupling Nut | Grade 2H | Plain / Furnace Black | 1 1/4-7 | 1 1/4-7 nc 2h coupling nut plain 2 waf x 3 oal | 6 |
|
| Jackson | MS | Castle Nut (Hex) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1-8 | 1-8 nc castle slotted nut18-8 stainless steel | 6 |
|
| OneMonroe | NC | Push-on Nut (Pushnut, Starlock Washer, etc.) | Steel | Zinc/Clear | 3 3/8 x 5 1/4 | rig rigid-plate w/axle nut spanner thrust washers accepts wheel sz 5 x 3 wheel mat steel finish zinc top plate sz 5 x 7-1/4 bolt hole ptrn 3-3/8 x 5-1/4 slotted to 4-1/8 x 6-1/8 load cap 3500 lbs | 6 |
|
| OneMonroe | NC | Push-on Nut (Pushnut, Starlock Washer, etc.) | Steel | Zinc/Clear | 5 1/4 x 7 1/4 | rig swivel-plate w/axle nut spanner thrust washers swivel lock accepts wheel sz 5 x 3 rig mat steel finish zinc top plate sz 5-1/4 x 7-1/4 bolt hole ptrn 3-3/8 x 5-1/4 slotted to 4-1/8 x 6-1/8 load cap 3500 lbs | 4 |
|
| OneMonroe | NC | Push-on Nut (Pushnut, Starlock Washer, etc.) | Steel | Zinc/Clear | 5 1/4 x 7 1/4 | rig swivel-plate w/axle nut spanner thrust washers swivel lock accepts wheel sz 6 x 3 rig mat steel finish zinc top plate sz 5-1/4 x 7-1/4 bolt hole ptrn 3-3/8 x 5-1/4 slotted to 4-1/8 x 6-1/8 load cap 3500 lbs | 4 |
|
| OneMonroe | NC | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Class 10.9 | Zinc/Clear | M5-0.8-0.80 | m5-0.8 class 10 zinc plated top lock nut din 980 | 250 |
|
| Jackson | MS | Lock Nut, Nylon Insert | Steel | Plain / Furnace Black | 1 1/2-12 | 1 1/2-12 fine heavy insert (nu) nut | 1 |
|
| Jackson | MS | Lock Nut, Nylon Insert | Class 10.9 | Zinc/Clear | M18-1.50 | m18 x 1.50 fine metric nyloc nut class 10 27 mm waf x 18 mm tall zinc plated din 985 | 25 |
|
| Jackson | MS | Lock Nut with Tooth L/W (K-Lock, Keps, etc.) | Steel | Zinc/Yellow | #4-40 | 4-40 nc keps locknut zinc yellow plated | 7522 |
|
| Jackson | MS | Finished Hex Nut | Class 8.8 | Plain / Furnace Black | M36-3.00 | m36 x 3.00 fine pitch metric hex nut 8.8 plain | 3 |
|
| Jackson | MS | Lock Nut, Top Locking, All Metal (Automation style, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/8-24 | 3/8-24 nf flex lock nut 18-8 stainless steel | 110 |
|
| Weaver | WA | Lock Nut, Nylon Insert | Steel | Zinc/Clear | #3-48 | 3-48 nylock nut zinc | 100 |
|
| OneMonroe | MN | Coupling Nut | Steel | Zinc/Clear | 3/8-16 x 1/2 x 1 3/4 | 3/8-16 x 1 3/4 hex coupling nut zinc 5/8 af | 6750 |
|
| OneMonroe | NC | Finished Hex Nut | Steel | Plain / Furnace Black | threadcutting nut f/raymond | 319 |
| |
| OneMonroe | MN | Finished Hex Nut | Brass | Plain / Furnace Black | 3/8-24 | 3/8-24 brass finished hex nut | 5000 |
|
| OneMonroe | NC | Cap Nut (Acorn Nut) | Steel | Silver Plated | #8-32 | nut self locking two lug cap floating 8-32 cres silver plated | 8 |
|
| OneMonroe | MN | Self-Clinching Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | flush fit nut ss thread-6-32 | 5 |
| |
| OneMonroe | MN | Self-Clinching Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | flush fit nut ss thread-10-32 | 75 |
| |
| OneMonroe | NC | Machine Screw Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | #4-40 | 4-40 small pattern hex nut stainless steel black oxide | 6377 |
|
| OneMonroe | MN | Self-Clinching Nut | Steel | Zinc/Clear | captive part #-c420-2 self-clinching nut crs zinc thread-1/4-20 | 500 |
| |
| OneMonroe | MN | Self-Clinching Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | captive part #-cfl632-1 flush nut 18-8 ss thread-6-32 | 700 |
| |
| OneMonroe | MN | Weld Nut | Steel | Plain / Furnace Black | M10-1.50 | weld nut square unpiloted m10 x 1.5 thread steel | 5000 |
|
| OneMonroe | MN | Lock Nut, Flange, w/o serrations | Grade 8 | Plain / Furnace Black | 1/4-20 | 1/4-20 gr.8 flange. l/n non-serr-yz | 2400 |
|
| OneMonroe | MN | Lock Nut, Flange, w/o serrations | Brass | Plain / Furnace Black | 3/8-16 | 3/8-16 flange lock nut-brass | 500 |
|
| OneMonroe | MN | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | Grade 8 | Plain / Furnace Black | 5/8-11 | 5/8-11 gr.8 hex flange lock nut serrated-yz | 200 |
|
| TownCountry | AR | Lock Nut, Center Locking, All Metal (2-Way Reversible) | Steel | Zinc/Clear | 1/2-13 | 2-way reversible lock nut | 30 |
|
| TownCountry | AR | Lock Nut, Nylon Insert | Steel | Zinc/Clear | 3/8-16 | nylon insert lock nut ne | 1696 |
|
| TownCountry | AR | T-Nut (Tee Nut) | Steel | Plain / Furnace Black | 1/4-20 | t-nut 5/16 barrell 4 prong | 68700 |
|
| TownCountry | AR | Finished Hex Nut | Steel | Plain / Furnace Black | 3/8-16 base tab nut 7/16 leg | 500 |
| |
| MAINSOURC | NH | Hex Jam Nut | Steel | Zinc/Yellow | M10-1.00 | hex fin jam nut stl zy din 439b | 1192 |
|
| MAINSOURC | NH | Lock Nut, Nylon Insert | Aluminum | Plain / Furnace Black | #4-40 | 4-40 esna 1660 l/n 68-1660-40 alum | 620 |
|
| MAINSOURC | NH | Wing Nut | Steel | Plain / Furnace Black | #8-32 | wing nut forged stl z/clr | 1398 |
|
| MAINSOURC | NH | Machine Screw Nut | Steel | Plain / Furnace Black | 1/4-20 | machine screw nut stl z/clr | 2500 |
|
| TownCountry | AR | Cap Nut (Acorn Nut) | Steel | Zinc/Black | 5/16-18 | nylon insert/cap lock nut nke w/black cap | 635000 |
|
| TownCountry | AR | Lock Nut with Tooth L/W (K-Lock, Keps, etc.) | Steel | Zinc/Clear | #10-32 | #10-32 hex keps locknut | 6000 |
|
| TownCountry | AR | Machine Screw Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #8-32 | #8-32 hex machine screw nut 18-8 s.s. | 893 |
|
| MAINSOURC | NH | Heavy Hex Nut | Grade 2H | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 1-8 | 1-8 heavy hex nut xylan 1424 a194 2h | 2 |
|
| MAINSOURC | NH | Hex Jam Nut | Grade 5 | Plain / Furnace Black | 1/2-13 | 1/2-13 hex fin jam nut gr 5 z/clr | 11 |
|
| MAINSOURC | NH | Self-Clinching Nut | Aluminum | Plain / Furnace Black | #10-32 | pem cla-032-2 | 50 |
|
| MAINSOURC | NH | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Phosphate | 1/4-20 | 1/4-20 hex j-nut steel blk phos | 100 |
|
| MAINSOURC | NH | Machine Screw Nut | Steel | Plain / Furnace Black | #10-32 | nas671b10 (m/s nut sp 10-32 brass cad) | 1250 |
|
| MAINSOURC | NH | Self-Clinching Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10-32 | pem clss-032-3 | 30 |
|
| MAINSOURC | NH | Self-Clinching Nut | Steel | Zinc/Clear | M5 | pem sl-m5-2 | 115 |
|
| MAINSOURC | NH | Self-Clinching Nut | Steel | Zinc/Clear | M4-0.70 | pem s-m4-1 | 56 |
|
| MAINSOURC | NH | Self-Clinching Nut | Steel | Plain / Furnace Black | pem sp-m5-2 | 10 |
| |
| IndexFast | CA | Push-on Nut (Pushnut, Starlock Washer, etc.) | Steel | Plain / Furnace Black | s10044-pc push on type speed nut .375 round black phosphate & oil | inquire |
| |
| IndexFast | CA | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Plain / Furnace Black | #8-32 | type-u speed nut range .045-.062 cte .234 | inquire |
|
| IndexFast | CA | Push-on Nut (Pushnut, Starlock Washer, etc.) | Steel | Plain / Furnace Black | .312 | push on type speed nut round stud | inquire |
|
| IndexFast | CA | Push-on Nut (Pushnut, Starlock Washer, etc.) | Steel | Zinc/Clear | 3/16 | 138623001 flat round type pushnut fastener steel/mechanical zinc ps 188307 sog | inquire |
|
| IndexFast | CA | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Zinc/Clear | #8-18 & x & | 138429001 on-sert fastener 8-18 & 8-15 steel/mechanical zinc & trivalent chromate nr 818005-205 | inquire |
|
| IndexFast | CA | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Zinc/Clear | 7/8-14 | rl 781400 ebf regular type lock nut steel/zinc electroplate | inquire |
|
| IndexFast | CA | Weld Nut | Steel | Plain / Furnace Black | s10327 slab base weld nut 10-32 3/4 l base 7/16 barrel height steel | inquire |
| |
| IndexFast | CA | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Phosphate | 1/4 | c7674-10z-4 type-u speed nut 10b range .036-.050 cte .250 black tinnerman c7674-10z-4(surplus) | inquire |
|
| IndexFast | CA | Push-on Nut (Pushnut, Starlock Washer, etc.) | Steel | Plain / Furnace Black | p31262-21 ah01 flat round type pushnut fastener 5/16 steel/plain ps 312010xeq (send out fo | 253988 |
| |
| IndexFast | CA | Weld Nut | Steel | Plain / Furnace Black | p2c-14-s 1/4-20x13/16x1/2 pilot weld nut 4 ribbed projections steel/plain | inquire |
| |
| IndexFast | CA | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Phosphate | .515 | d8106-832-4eq type-u speed nut 8-32 range .025-.040 cte .515 black 2070-04 tinnerman c8106-832-4eq | inquire |
|
| SRF | AL | Steel | M20-2.50 | spring lock nut bn 1964 | 100 |
| ||
| SRF | AL | Cap Nut (Acorn Nut) | Steel | Zinc/Clear | 1/2 | push capnut | - |
|
| SRF | AL | T-Nut (Tee Nut) | Steel | Plain / Furnace Black | #10-24 x 7/16 | tee nut 3 prong | 15,006 |
|
| SRF | AL | Finished Hex Nut | Grade 8 | Plain / Furnace Black | 1 1/8-7 | hex finish nut gr 8 | 47 |
|
| SRF | AL | Hex Jam Nut | Grade 8 | Plain / Furnace Black | 3/4-10 | hex fin jam nut gr 8 | - |
|
| SRF | AL | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade A | Zinc/Clear | 5/8-11 | gr a all metal locknut | 735 |
|
| SRF | AL | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Galvanized | 3/8-16 | top locknut | 1,949 |
|
| SRF | AL | Finished Hex Nut | Grade 9 | Zinc/Yellow | 1 1/2-12 | hex finish nut l9 | - |
|
| SRF | AL | Cap Nut (Acorn Nut) | Steel | Zinc/Clear | 1/2-13 | cap nut | 2,720 |
|
| SRF | AL | Self-Clinching Nut | Steel | Zinc/Clear | #10-24 | self-clinching nut | 1,813 |
|
| SRF | AL | Finished Hex Nut | Class 10.9 | Plain / Furnace Black | M12-1.25 | hex finish nut 10 | 45 |
|
| SRF | AL | Hex Jam Nut | Steel | Zinc/Clear | M12-1.25 | hex fin jam nut | - |
|
| SRF | AL | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Phosphate | 5/8-11 | crown locknut phos/oil | - |
|
| Endries | WI | Finished Hex Nut | Steel | Zinc/Yellow | 1/2-13 | 1/2-13 finished hex full nut yellow zinc | 1800 |
|
| Endries | WI | Square Nut | Steel | Zinc/Clear | 3/8-16 | 3/8-16 square nut trivalent clear zinc | 300 |
|
| Endries | WI | Lock Nut, Nylon Insert | Steel | Zinc/Yellow | 3/8-16 | 3/8-16 nte series jam nylon insert locknut yellow zinc | 2000 |
|
| Endries | WI | Lock Nut, Center Locking, All Metal (2-Way Reversible) | Grade B | Zinc/Yellow | 3/4-10 | 3/4-10 grade b 2 way center locknut yellow zinc and wax | 975 |
|
| Endries | WI | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1 1/8-12 | 1-1/8-12 18-8 stainless steel finished hex full nut | 8 |
|
| Endries | WI | Self-Clinching Nut | Steel | Zinc/Clear | 420-0 1/4-20 | c420-0 1/4-20 self clinching nut trivalent clear zinc (captive) | 700 |
|
| Endries | WI | Weld Nut | Plain / Furnace Black | 3/8-16 | 3/8-16 sq weld nut long pilot | 860 |
| |
| Endries | WI | Lock Nut, Flange, w/o serrations | Grade G | Phosphate | 5/8-18 | 5/8-18 grade g flange oval top locknut phos and oil 96 hour to red rust | 29 |
|
| XL Screw | GA | Finished Hex Nut | Grade 8 | Zinc/Yellow | 1-14 | gr 8 fin hex nuts zyd SAE j995 | 160 |
|
| XL Screw | GA | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade C | Zinc/Clear | 3/4-10 | gr c prevailing torque lock nuts h t zp waxed | 400 |
|
| XL Screw | GA | Square Nut | Steel | Zinc/Clear | 7/16-14 | regular square nuts zp | 1,000 |
|
| RePneu To | MI | Finished Hex Nut | Grade 5 | Zinc/Clear | 1-8 | 1-8 hex nuts unc low carbon zinc cr+3 | 400 |
|
| Cal Fastenrs | CA | Square Nut | Steel | Plain / Furnace Black | 3/4-10 | square nut | 27 |
|
| Cal Fastenrs | CA | Finished Hex Nut | Steel | Zinc/Clear | 3/4-10 | hex finish nut Cr3+ | 480 |
|
| Cal Fastenrs | CA | Lock Nut with Tooth L/W (K-Lock, Keps, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-20 | kep nut 18-8 304 | 400 |
|
| Cal Fastenrs | CA | Plate Nut (Nutplate, Floating Anchor Nut) | Steel | Zinc/Clear | 1 1/2-6 | hex finish nut | 28 |
|
| Cal Fastenrs | CA | Heavy Hex Nut | Grade 2H | Plain / Furnace Black | 2 1/4-4.5 | heavy hex nut h | 12 |
|
| Cal Fastenrs | CA | Finished Hex Nut | Grade 5 | Zinc/Clear | 1/2-13 | fin hex nut -Cr3+ | 14,750 |
|
| Cal Fastenrs | CA | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-20 | 1/4-20 hex nylok nut low profile 18-8 304 25CNNE3/LOW | 17 |
|
| Cal Fastenrs | CA | Finished Hex Nut | Steel | Zinc/Clear | 7/16-14 | hex nut Cr3+ | 471 |
|
| Cal Fastenrs | CA | Finished Hex Nut | Steel | Plain / Furnace Black | 1 1/4-12 | hex finish nut | 5 |
|
| Cal Fastenrs | CA | Heavy Hex Nut | Grade 7 | Plain / Furnace Black | x | heavy hex nut asme sa194 grade 7 asme section ii coercial | 7 |
|
| Cal Fastenrs | CA | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M4-0.70 | nylon insert lock nut 18-8 304 | 3,660 |
|
| Cal Fastenrs | CA | Finished Hex Nut | Grade 8 | Plain / Furnace Black | 1 1/2-6 hex nut - - | 1 |
| |
| Cal Fastenrs | CA | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | Steel | Zinc/Clear | 5/8-11 | whiz flange nut | 14 |
|
| Cal Fastenrs | CA | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/2-13 | 1/2-13 hex nylok nut 18-8 304 50CNNE3 | 100 |
|
| Cal Fastenrs | CA | Flange Nut, Non-locking | Grade 5 | Phosphate | 1/2-13 | flange nut gr5 black & oil | 500 |
|
| Cal Fastenrs | CA | Lock Nut with Tooth L/W (K-Lock, Keps, etc.) | Steel | Zinc/Clear | #6-32 | kep nut | 27 |
|
| Cal Fastenrs | CA | Finished Hex Nut | Steel | Zinc/Yellow | 1/2-13 | hex finish nut dc ii see 50cnfh5y | 605 |
|
| Cal Fastenrs | CA | Hex Jam Nut | Steel | Zinc/Clear | 1 1/4-12 | hex fin jam nut | 5 |
|
| Cal Fastenrs | CA | Plate Nut (Nutplate, Floating Anchor Nut) | Steel | Zinc/Clear | 1 1/8-7 | hex finish nut | 24 |
|
| Cal Fastenrs | CA | Machine Screw Nut | Brass | Nickel Plated | #6-32 | hex machine screw nut - - | 9,985 |
|
| Endries | WI | Coupling Nut | Steel | Zinc/Clear | 5/8-11 x 13/16 x 2 1/8 | 5/8-11x13/16x2-1/8 coupling nut trivalent clear zinc | 250 |
|
| Endries | WI | Hex Jam Nut | Plain / Furnace Black | 7/8-14 | 7/8-14 finished hex jam nut plain | 1550 |
| |
| OneMonroe | NC | Lock Nut, Flange, w/o serrations | Grade F | Zinc/Clear | 7/16-20 | 7/16-20 flange lock nut grade f zinc | 1100 |
|
| OneMonroe | NC | Finished Hex Nut | Steel | Plain / Furnace Black | special order ! gojo white coconut skin cleaner-gallon | 1 |
| |
| OneMonroe | NC | Lock Nut, Center Locking, All Metal (2-Way Reversible) | Steel | Zinc/Clear | 5/16-24 | 5/16-24 2-way rev. l/n-zp | 75 |
|
| OneMonroe | NC | Wing Nut | Steel | Zinc/Clear | M10-1.5-1.50 | m10-1.5 zinc plated cold forged wing nut | 50 |
|
| OneMonroe | NC | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M3-1-1.00 | nut ss metric m3 x 1 | 240 |
|
| OneMonroe | NC | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M4-1-1.00 | nut ss metric m4 x 1 | 3000 |
|
| OneMonroe | NC | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M5-1-1.00 | nut ss metric m5 x 1 | 3000 |
|
| OneMonroe | NC | Self-Clinching Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10-24 | clinch nut press-in 10-24 stainless | 500 |
|
| OneMonroe | NC | Self-Clinching Nut | Steel | Plain / Furnace Black | #4-40 x 1 | flush nut #4-40 x 1 | 2110 |
|
| OneMonroe | NC | Self-Clinching Nut | Plain / Furnace Black | M5-1-1.00 | flush nut metric m5 x 1 | 3800 |
| |
| OneMonroe | NC | Finished Hex Nut | Steel | Plain / Furnace Black | 3/8-16 x 1 | glide base diameter 1-3/8 polyethlene base 3/8-16 x 1 threaded stem hex nut at stem base. | 1 |
|
| OneMonroe | NC | Weld Nut | Steel | Plain / Furnace Black | #6-6-1.0 | 6-proj hex weld nut m6-1.0 | 100 |
|
| OneMonroe | NC | Nut Retainer (Cage Type, U-Type, J-Type, etc.) | Steel | Plain / Furnace Black | 5/16-18 | 5/16-18 steel c age retainer nut .057-.092 panel range .660 width | 200 |
|
| OneMonroe | NC | Lock Nut, Flange, w/o serrations | Steel | Plain / Furnace Black | 5/16 | flgd lock nut 5/16 | 400 |
|
| OneMonroe | NC | Finished Hex Nut | Steel | Plain / Furnace Black | nut | 12 |
| |
| OneMonroe | NC | Cap Nut (Acorn Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/16-24 | 5/16-24 acorn nut-s.s. | 69 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
