FCH Member Advertisement
FCH News
Studs & Threaded Rod
55,247 Studs & Threaded Rod, showing 200, (click on any line for more information)
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Endries | WI | Fully Threaded Stud (All Thread) | Ceramic | Plain / Furnace Black | ceramic ferrule for hl-104 1/8x5/8 wiggled rectangular stud | 334 |
| |
| Endries | WI | Fully Threaded Stud (All Thread) | Steel | Plain / Furnace Black | 1/2-13 x 2 3/8 | 1/2-13x2-3/8 point military specification stud | 47 |
|
| Endries | WI | Resistance/Projection Weld Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-20 x 3/4 | 1/4-20x3/4 18-8 304 steel right angle spot weld screw source controlled | 1000 |
|
| Endries | WI | CD Weld Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #8-32 x 5/8 | 8-32x5/8 18-8 s/s steel cd weld stud non flange | 4762 |
|
| GLF | OH | Threaded Rod | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/8-16 x 3 | 3/8-16 x 3 ft. threaded rod-304 stainless | 2 |
|
| GLF | OH | Threaded Rod | Steel | Zinc/Clear | M16-2.00 x 1 | m16-2.0 x 1 meter-left hand-threaded rod-zinc | 1 |
|
| GLF | OH | Threaded Rod | Grade A36 | Zinc/Clear | 7/8-9 x 3 | 7/8-9 x 3 ft. low carbon-threaded rod-zinc | 1 |
|
| GLF | OH | Threaded Rod | Steel | Galvanized | 1-8 x 6 | 1-8 x 6 threaded rod l/c stl hdg | 1 |
|
| GLF | OH | Fully Threaded Stud (All Thread) | 316, 317, A4 Stainless | Plain / Furnace Black | 3/4-10 x 4 | 3/4-10 x 4 f/t stud 316 s/s | 22 |
|
| OneMonroe | NC | Fully Threaded Stud (All Thread) | Steel | Zinc/Yellow | 1/4-20 x .312 | 1/4-20 x .312 hex length (zinc yellow) stud-nutsb inner fastener | 964 |
|
| OneMonroe | NC | Wheel Stud (Screw-in & Press-in) | Steel | Zinc/Clear | 6 1/2 x 7 1/2 | caster thrust swivel section plate wheel sz 8 x 4 wheel mat cast iron gray enamel finish bearing roller load ht 10-1/2 top plate sz 6-1/2 x 7-1/2 bolt hole ptrn 4-1/2 x 6 load cap 6000 lbs | 2 |
|
| OneMonroe | NC | Self-Clinching Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #6-32 x 3/4 | 6-32 x 3/4 flush head stud stainless steel | 1000 |
|
| OneMonroe | NC | Fully Threaded Stud (All Thread) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | cast al 1x1.87x5/16-18 ss stud | 1450 |
| |
| OneMonroe | NC | Fully Threaded Stud (All Thread) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/2-13 x 20 | 1/2-13 x 20 full threaded stud s.s. | 1 |
|
| OneMonroe | NC | Wheel Stud (Screw-in & Press-in) | Steel | Zinc/Clear | 4 1/2 x 6 1/4 | caster swivel plate wheel sz 8 x 3 wheel mat polyurethane on iron bearing precision ball top plt sz 4-1/2 x 6-1/4 bolt hole ptrn 2-7/16 x 4-15/16 slotted to 4-1/8 x 6-1/8 load ht 10-1/8 load cap 2500 lb temp rt-40 to +180 f | 6 |
|
| OneMonroe | NC | Wheel Stud (Screw-in & Press-in) | Rubber, Buna-N, Neoprene etc. | Plain / Furnace Black | 7/8 x 3 5/8 | caster rigid plate wheel sz 5 x 1 1/4 wheel mat so ft rubber bearing plain bore load ht 6 1/8 top plt sz 2 7/8 x 3 5/8 bolt hole ptrn 1-3/4 x 2-15/16 load cap 200 lbs temp rt-40 to +158 f | 71 |
|
| OneMonroe | NC | Fully Threaded Stud (All Thread) | Steel | Plain / Furnace Black | #10-24 x 15 | 10-24 x 15 full thread stud steel plain | 5 |
|
| OneMonroe | NC | Threaded Rod | Steel | Zinc/Clear | 5/16-18 x 6 | 5/16-18 x 6 threaded rod-zp | 28 |
|
| OneMonroe | NC | Threaded Rod | Steel | Zinc/Clear | 3/4-10 x 3 | 3/4-10 x 3 threaded rod-zp | 6 |
|
| OneMonroe | NC | Threaded Rod | Steel | Zinc/Clear | #8-32 x 3 | 8-32 x 3 threaded rod-zp | 4 |
|
| OneMonroe | NC | Threaded Rod | Steel | Zinc/Clear | 1/4-28 x 3 | 1/4-28 x 3 threaded rod-zp | 6 |
|
| OneMonroe | NC | Threaded Rod | Steel | Zinc/Clear | 3/8-24 x 3 | 3/8-24 x 3 threaded rod-zp | 4 |
|
| OneMonroe | NC | Threaded Rod | Steel | Zinc/Clear | 7/16-20 x 3 | 7/16-20 x 3 threaded rod-zp | 4 |
|
| OneMonroe | NC | Threaded Rod | Steel | Zinc/Clear | 3/4-16 x 3 | 3/4-16 x 3 threaded rod-zp | 3 |
|
| OneMonroe | NC | Double End Stud | Plain / Furnace Black | M10 x 35 x 10 x 12 x 47 | 10 x 35 x 10 x 12 x 47mm metric stud (25 sets/per) din 939 | 1 |
| |
| OneMonroe | NC | CD Weld Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-20 x 1.0 | 1/4-20 x 1.0 cd stud-flanged ss | 100 |
|
| OneMonroe | NC | Threaded Rod | Grade A | Zinc/Clear | 1/2-13 x 2 | 1/2-13x2 unc blue (reflex) blue tip a307 grade a all thread rods zinc cr+3 | 8 |
|
| OneMonroe | NC | Threaded Rod | Steel | Plain / Furnace Black | treaded rod | 10 |
| |
| OneMonroe | NC | Threaded Rod | Steel | Plain / Furnace Black | rod | 3 |
| |
| Bossard | AZ | Resistance/Projection Weld Stud | Plain / Furnace Black | weld screw right angle | misc fasteners/hardware | 500 |
| ||
| Bossard | AZ | Resistance/Projection Weld Stud | Plain / Furnace Black | weld studs tip ignition ext thread | article numbers | 500 |
| ||
| Bossard | AZ | CD Weld Stud | Plain / Furnace Black | weld stud flanged cd bn28786 | article numbers | 3000 |
| ||
| Bossard | AZ | Resistance/Projection Weld Stud | Plain / Furnace Black | weld stud grounding | misc fasteners/hardware | 1199 |
| ||
| Endries | WI | CD Weld Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M8 x 25 | M8x25 304 18-8 304 steel non flanged cd weld stud copper flash | 293 |
|
| Endries | WI | Threaded Rod | Grade B7 | Plain / Furnace Black | 1-8 x 12 | 1-8x12 a193 grade b7 thread rod w/cert orange ends | 900 |
|
| Endries | WI | CD Weld Stud | Copper | Plain / Furnace Black | 5/16-18 x 1 | 5/16-18x1 capacitor discharge mild steel flange weld stud copper | 1000 |
|
| Endries | WI | CD Weld Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/8-16 x 1 1/2 | 3/8-16x1-1/2 18-8 304 steel cd flange weld stud | 82 |
|
| Endries | WI | CD Weld Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10-24 x 5/8 | 10-24x5/8 capacitor discharge 18-8 304 non flange weld stud | 39333 |
|
| Endries | WI | CD Weld Stud | 400 Stainless (405, 410,416,420,430 etc.) | Plain / Furnace Black | M4 x 10 | cfsnm0410 (oe) m4x10 18-8 stainless steel cd weld stud | 14540 |
|
| Endries | WI | CD Weld Stud | Copper | Plain / Furnace Black | 1/4-20 x 3/4 | 1/4-20x3/4 copper flash cd weld stud 4083350 | 1000 |
|
| Endries | WI | CD Weld Stud | Copper | Plain / Furnace Black | #8-32 x 1 1/4 | 8-32x1-1/4 flange cd weld stud copper flashed | 42050 |
|
| Endries | WI | CD Weld Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M6 x 10 | M6x10 capacitor discharge 18-8 304 flange weld stud | 15876 |
|
| Endries | WI | CD Weld Stud | Copper | Plain / Furnace Black | #8-32 x 1/2 | 8-32x1/2 capacitor discharge mild steel non flange weld stud copper | 1600 |
|
| Endries | WI | Resistance/Projection Weld Stud | Steel | Plain / Furnace Black | 5/16-18 x 7/8 | 5/16-18x7/8 underhead 3 projection weld screw plain source controlled | 8750 |
|
| Endries | WI | Resistance/Projection Weld Stud | Steel | Zinc/Clear | 5/16-18 x 5/8 | 5/16-18x5/8 underhead 3 projection weld screw trivalent clear zinc | 38700 |
|
| Endries | WI | Self-Clinching Stud | Steel | Zinc/Clear | #6-32 x 3/8 | ch632-6zi 6-32x.375 self clinching stud zinc | 1000 |
|
| Endries | WI | Fully Threaded Stud (All Thread) | Steel | Zinc/Yellow | 5/16-18 x 9.38 | 5/16-18x9.38 full thread stud yellow zinc | 2 |
|
| Endries | WI | CD Weld Stud | Copper | Plain / Furnace Black | M6 x 30 | M6x30 capacitor discharge mild steel flange weld stud copper | 10550 |
|
| Endries | WI | CD Weld Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M8 x 12 | M8x12 a2 18-8 304 cd flange weld stud | 8600 |
|
| Endries | WI | CD Weld Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10-24 x 1/4 | 10-24x1/4 18-8 s/s steel cd weld stud flanged | 5000 |
|
| Endries | WI | CD Weld Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/16-18 x 3/4 | 5/16-18x3/4 18-8 s/s steel no flange cd weld stud source controlled | 19380 |
|
| Endries | WI | Threaded Rod (Acme Thread) | Steel | Plain / Furnace Black | 1-5 x 12 | 1-5x12ft acme thread rod (sold per foot) | 84 |
|
| Endries | WI | Fully Threaded Stud (All Thread) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/8-16 x 2 | 3/8-16x2 overall length 18-8 s/s steel full thread stud | 336 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
