FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Century | FL | External Thread Insert, Self-Tapping Insert | sp-1032 speedsert | 45 |
| |||
| Century | FL | w m berg ss2-60 (SHAFT SPACERS) (SHAFT SPACERS) | 300 |
| ||||
| Century | FL | Steel | st3m557-3-3 screw close boeing | 2465 |
| |||
| Century | FL | cherry cr1921m04s07w | 500 |
| ||||
| Endries | WI | Protective Caps & Plugs | Plastic | Plain | .554 x .031 | t-6s (or equivalent) .554x.031 low-density polyethylene tapered cap red | 4500 |
|
| Endries | WI | Self-Tapping Self-Drilling Screw (Tek etc.) | Rubber, Buna-N, Neoprene etc. | Plain | 1/4-14 x 1 1/4 | 798828 1/4-14x1-1/4in hex washer head zac 3 point self drill screw w/epdm washer bunished slate painted head | 2400 |
|
| Endries | WI | Conical, Ribbed, Fluted Light Duty Plastic Anchor | Plastic | Plain | 5/8 x 3 13/16 | 5/8x3-13/16 vinyl round ribbed contour grip black | 36 |
|
| Endries | WI | Machine Screw | Plastic | Plain | M4 x 10 | m4x10 polycarbonate phillips pan head machine screw black din 7985 | 366 |
|
| Endries | WI | Hole Saws | Steel | 1/4 | hosa62590 1/4 round shank hole saw 3/4-1-1/8 arbor | 2 |
| |
| Endries | WI | Pipe Tee | 316, 317, A4 Stainless | 1/4 | smrt-04-04n (or equivalent) 316 stainless spipe teel 1/4 male run pipe tee | 60 |
| |
| Endries | WI | Flange Nut, Non-locking | Class 8.8 | Zinc/Yellow | M10 | m10 class 8 hex flange nut yellow zinc din 6923 | 15000 |
|
| MESAFAST | CA | Machine Screw | Nylon (Polyamide) | Plain | #6-32 x 1 1/4 | slotted round mach | 293.0 |
|
| MESAFAST | CA | Flat Washer | Nylon (Polyamide) | Plain | .265 x .500 x .032 | flat | 100.0 |
|
| MESAFAST | CA | Dowel Pin | Steel | Plain | 1/4 x 1 | fluted wooden dowel | 595.0 |
|
| MESAFAST | CA | Cable Clamps & Ties | Nylon (Polyamide) | Plain | .095 x 4 | cable tie 18 # black | 600.0 |
|
| MESAFAST | CA | Fender Washer | Nylon (Polyamide) | Plain | 1/2 x 2 | 1/2 (x 2 od) fender | 8.0 |
|
| MESAFAST | CA | Machine Bushings | Steel | Plain | .375 (1/4 id) press fit insulating bush | 1,000.0 |
| |
| MESAFAST | CA | Socket Head Cap Screw | Nylon (Polyamide) | Plain | #6-32 x 1/2 | socket hd cap | 593.0 |
|
| MESAFAST | CA | Cable Clamps & Ties | Nylon (Polyamide) | Plain | .100 x 6 | cable tie black | 2,600.0 |
|
| MESAFAST | CA | Flat Washer | Nylon (Polyamide) | Plain | .218 x .370 x .070 | flat washer blk nylon | 2,700.0 |
|
| MESAFAST | CA | Flat Washer | Nylon (Polyamide) | Plain | .375 x .630 x .032 | flat | 500.0 |
|
| MESAFAST | CA | Round Female/Female Standoff | Nylon (Polyamide) | Plain | .312 x .312 | snap-in s/o | 1,000.0 |
|
| MESAFAST | CA | Socket Head Cap Screw | Nylon (Polyamide) | Plain | #6-32 x 7/16 | socket cap | 510.0 |
|
| MESAFAST | CA | Flat Washer | Nylon (Polyamide) | Plain | .257 x .500 x .062 | flat | 427.0 |
|
| MESAFAST | CA | Machine Screw | Nylon (Polyamide) | Plain | #10-24 x 5/8 | slotted pan mach | 1,448.0 |
|
| MESAFAST | CA | Machine Screw | Nylon (Polyamide) | Plain | 1/4-20 x 1/2 | slotted flat mach | 1,092.0 |
|
| MESAFAST | CA | Flat Washer | Nylon (Polyamide) | Plain | .188 x .500 x .062 | .188 id x .500 od x .062 thk | 500.0 |
|
| MESAFAST | CA | Fender Washer | Nylon (Polyamide) | Plain | 1/2 x 1 1/4 | 1/2 (x 1-1/4 od) fender | 552.0 |
|
| MESAFAST | CA | Round Spacer | Nylon (Polyamide) | Plain | .260 x 1/2 x 1.00 | .260 id x 1/2 od x 1.00 lng spacer | 20.0 |
|
| MESAFAST | CA | Plain | .562 diam circular hole plug black | 800.0 |
| |||
| MESAFAST | CA | Flat Washer | Nylon (Polyamide) | Plain | .260 x .437 x .047 | flat | 50.0 |
|
| Endries | WI | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6 x 30 | m6x30 a2 stainless / iso4017 full thread hex head cap screw with wax din 933 | 385 |
|
| MESAFAST | CA | Hex Machine Bolt | 316, 317, A4 Stainless | Plain | 1-8 x 5 1/2 | h/b 316 stainless | 4.0 |
|
| Endries | WI | Round Female/Female Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M4.5 | fm0502-25-ss 2.7x3mm 4.5mm a2 stainless spacer m2.5 screw (fascomp only) | 1000 |
|
| MESAFAST | CA | Flat Washer | 316, 317, A4 Stainless | Plain | 1/2 x 1 1/4 | flat 316 s/s | 77.0 |
|
| Endries | WI | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | K30 x 12 | k30x12 wn1451 t10 drive 6-lobe pan washer head type pt (or equivalent) screw trivalent clear zinc | 500 |
|
| Endries | WI | Carriage Bolt | Steel | Zinc/Black | 5/16-18 x 2 3/4 | 5/16-18x2-3/4 full thread shortneck carriage bolt trivalent black zinc 72 hours to red rust | 5725 |
|
| Endries | WI | Electrical Lugs & Terminals | Nylon (Polyamide) | 22-18 | 32191 18-22 awg nylon fully insulated female quick disconnect .010x.020 tab (hillsdale only) | 1000 |
| |
| Endries | WI | Machine Bushings | Steel | Zinc/Yellow | 2 1/2 x 1 1/2 | 2-1/2x1-1/2 steel thread bushing tri ylw 96hr wh f1941 .0002 | 5 |
|
| Endries | WI | Shoulder Bolt (Stripper Bolt) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/45 x .187 | .187x.2505 stainless steel socket shoulder screw 8-32 thread clean per kla 0099999-000 spec | 100 |
|
| Endries | WI | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | #4-40 x 3/16 | 4-40x3/16 phillips pan head tri-lobe thread rolling screw with grounding nib trivalent clear zinc | 2008 |
|
| Endries | WI | Flat Washer | Steel | Zinc/Clear | 3/8 | 3/8 standard flat washer zinc (.433x.99 3x.064) approved duplicate part item mast | 400 |
|
| Endries | WI | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M16 x 130 | m16x130 class 10.9 / iso4014 partial thread hex head cap screw trivalent clear zinc din 931 | 1000 |
|
| MESAFAST | CA | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 x 1/2 | t/r hex button m/s 18-8 s/s | 100.0 |
|
| MESAFAST | CA | Lock Nut, Nylon Insert | 316, 317, A4 Stainless | Plain | 1/4-20 | nylon insert lock nut 316 s/s | 81.0 |
|
| MESAFAST | CA | Lock Nut, Nylon Insert | 316, 317, A4 Stainless | Plain | 5/8-11 | nylon insert lock nut 316 s/s | 5.0 |
|
| MESAFAST | CA | 3-1/4 x 3-1/8 x 1-3/8 mini box | 2.0 |
| ||||
| MESAFAST | CA | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 1/2 | t/r torx flat m/s 18-8 | 125.0 |
|
| MESAFAST | CA | Lock Nut, Nylon Insert | 316, 317, A4 Stainless | Plain | 3/8-16 | nylon insert lock nut 316 s/s | 90.0 |
|
| MESAFAST | CA | Carriage Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 1 | c/b 18-8 s/s | 83.0 |
|
| MESAFAST | CA | Hex Machine Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 3/8 | h/b 18-8 s/s | 3,000.0 |
|
| MESAFAST | CA | Hex Machine Bolt | 316, 317, A4 Stainless | Plain | 1/2-13 x 1 3/4 | h/b 316 s/s | 170.0 |
|
| MESAFAST | CA | Machine Screw | Nylon (Polyamide) | Plain | 1/4-20 x 1 | slotted round mach | 105.0 |
|
| MESAFAST | CA | Fender Washer | 316, 317, A4 Stainless | Plain | 1/4 x 1 | fender 316 stainless | 4,000.0 |
|
| MESAFAST | CA | Finished Hex Nut | 316, 317, A4 Stainless | Plain | 5/16-18 | hex nut 316 s/s | 35.0 |
|
| MESAFAST | CA | Finished Hex Nut | 316, 317, A4 Stainless | Plain | 1/2-13 | hex nut 316 s/s | 16.0 |
|
| MESAFAST | CA | Finished Hex Nut | 316, 317, A4 Stainless | Plain | 5/8-11 | hex nut 316 s/s | 2.0 |
|
| MESAFAST | CA | Hex Machine Bolt | 316, 317, A4 Stainless | Plain | 1/4-20 x 1 | h/b 316 s/s | 10.0 |
|
| MESAFAST | CA | Finished Hex Nut | 316, 317, A4 Stainless | Plain | 1/4-20 | hex nut 316 s/s | 65.0 |
|
| MESAFAST | CA | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 3/4 | t/r torx flat m/s 18-8 s/s | 100.0 |
|
| MESAFAST | CA | Flat Washer | Nylon (Polyamide) | Plain | 1/2 x 1 | 1/2 (x 1 od) flat | 54.0 |
|
| MESAFAST | CA | Flat Washer | Nylon (Polyamide) | Plain | .750 x 1.500 x .250 | .250 thk x .750 id x 1.500 od | 7.0 |
|
| MESAFAST | CA | Flat Washer | Nylon (Polyamide) | Plain | #8 | 470.0 |
| |
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
