FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| YANKEE | NH | Saw Blades | 1/4 x 025 x 32t | 1/4 x025x32t blade flex-back (100 coil) | 15 |
| ||
| YANKEE | NH | Set Screw (Socket Head) | Steel | Plain | 1/4 x 1 5/8 | nutsetter powermag 1/4 hex x 1-5/8 | 3 |
|
| YANKEE | NH | Machine Dies | M10-1.50 | m10 (1.5) adj round split die-1 | 1 |
| ||
| YANKEE | NH | Screwdriving Insert Bits & Power Bits | #2 | #2 phillips bit-2.75 length-1/4 hex | 30 |
| ||
| YANKEE | NH | Files, Rasps & Planers | 1/2 | file-1/2 round bastard-8 | 3 |
| ||
| YANKEE | NH | Files, Rasps & Planers | 8 | file-half round bastard-8 | 5 |
| ||
| YANKEE | NH | Files, Rasps & Planers | 8 | file-flat-chipbreaker-8 | 1 |
| ||
| YANKEE | NH | Files, Rasps & Planers | file-bastard-10 mill bastard | 2 |
| |||
| YANKEE | NH | Files, Rasps & Planers | file-bastard-16 mill bastard | 2 |
| |||
| YANKEE | NH | Files, Rasps & Planers | 10 | file-mill smooth-10 | 8 |
| ||
| YANKEE | NH | Files, Rasps & Planers | 12 | file-mill smooth-12 | 1 |
| ||
| YANKEE | NH | Files, Rasps & Planers | 6 | file-round bastard-6 | 23 |
| ||
| YANKEE | NH | Files, Rasps & Planers | 8 | file-square bastard-8 | 4 |
| ||
| YANKEE | NH | Files, Rasps & Planers | 6 | file-square second cut-6 | 1 |
| ||
| YANKEE | NH | Files, Rasps & Planers | 8 | file-square-second cut-8 | 5 |
| ||
| YANKEE | NH | Ball Bearings, Balls, Bearing Mounts | Steel | Black Oxide | #ba | fastex # 320-221401-00 ball receiver-blk | 30 |
|
| YANKEE | NH | Ball Bearings, Balls, Bearing Mounts | Steel | Black Oxide | # | fastex # 320-322880-01 standoff ball-blk | 30 |
|
| YANKEE | NH | Press-In/Ultrasonic Insert for Plastic (E-Z Lok etc.) | 3/8-16 | e-z lok 10-24 3/8-16 thread insert | 17 |
| ||
| YANKEE | NH | Band Saw Blades | ripper-37 1 x035x2/p bandsaw blade | 60 |
| |||
| YANKEE | NH | Press-In/Ultrasonic Insert for Plastic (E-Z Lok etc.) | Brass | Plain | #10-32 x 3/8 x 5/16 24 | 10-32 x 3/8 long x 5/16-24 brass insert | 316 |
|
| OneMonroe | NC | ntt smith 2164 | 300 |
| ||||
| YANKEE | NH | Countersink Cutters | Steel | single flute countersink-82deg-1/2 tool high speed steel | 1 |
| ||
| YANKEE | NH | Machine Screw | Steel | Plain | 3 | 3 flute center reamer-82 degree 3/4 tool-high speed steel | 1 |
|
| YANKEE | NH | Machine Screw | Steel | Plain | 3 | 3-flute center reamer 82deg 3/8 tool | 1 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
