ASME B18.21.1 Internal Tooth Lock Washer by Material, Finish and Size

Tooth Lock Washers are often used with machine screws in electrical applications, and are usually smaller diameter An Internal Tooth Lock Washer has teeth around the center hole, while an External Tooth Lock Washer has teeth around the outside. Sometimes tooth lock washers can be concave, and have both internal and external teeth. Larger diameter External Tooth Lock washers are often used to lock nuts onto shafting. In this case the external tabs are bent up to lock the nut in place.

Search thousands of US/Imperial fasteners by ASME specification, including ASME b18.21.1 Tooth Lock Washers , in the FCH Sourcing Network database of first-run, surplus, odd lot, slow-moving and hard to find fasteners.

ASME b18.21.1 Tooth Lock Washers by Imperial/ Sizes

Tooth Lock Washers are available on the FCH Network with imperial diameters that range from #2 to 4, and with lengths that range from 5 to 5.

Click on the imperial diameters or lengths below to view or
Shop All ASME b18.21.1 Tooth Lock Washers
ASME b18.21.1 Tooth Lock Washers by Materials

ASME b18.21.1 Tooth Lock Washers are available on the FCH Network in materials that range from Steel to Silicon Bronze.

Click on the materials below to view or Shop All ASME b18.21.1 Tooth Lock Washers
ASME b18.21.1 Tooth Lock Washers by Coatings/Finishes

ASME b18.21.1 Tooth Lock Washers are available on the FCH Network in finishes or coatings that range from Plain to Phosphate.

Click on the finishes below to view or Shop All ASME b18.21.1 Tooth Lock Washers