ANSI B18.1.1 Small Solid Rivets (Up to 1/2 inch) by Material, Finish and Size

Solid Rivets are the oldest and simplest type of rivet, their use going back to Ancient Egyptian times. Like all rivets, their purpose is to tightly clamp two pieces of material together. A solid rivet consists of a smooth cylindrical shaft, with a flat or rounded head on one end. Unlike a blind rivet, free access to both sides of the joint is required. The rivet is placed in a pre-drilled hole, and the tail end of the rivet is deformed by pressure until the pieces are tightly clamped together. Blind rivets are extensively used in steel construction, ship building, aeroplane construction.

Search thousands of US/Imperial fasteners by ANSI specification, including ANSI/ASME b18.1.1 Solid Rivets , in the FCH Sourcing Network database of first-run, surplus, odd lot, slow-moving and hard to find fasteners.

ANSI/ASME b18.1.1 Solid Rivets by Imperial/ Sizes

Solid Rivets are available on the FCH Network with imperial diameters that range from #8 to 5, and with lengths that range from 1/8 to 18.

Click on the lengths below to view or Shop All ANSI/ASME b18.1.1 Solid Rivets
ANSI/ASME b18.1.1 Solid Rivets by Materials

ANSI/ASME b18.1.1 Solid Rivets are available on the FCH Network in materials that range from Steel to Rubber, Buna-N etc..

Click on the materials below to view or Shop All ANSI/ASME b18.1.1 Solid Rivets
ANSI/ASME b18.1.1 Solid Rivets by Coatings/Finishes

ANSI/ASME b18.1.1 Solid Rivets are available on the FCH Network in finishes or coatings that range from Plain to Tin.

Click on the finishes below to view or Shop All ANSI/ASME b18.1.1 Solid Rivets