FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Century | FL | pm011204e, 5449k185 | 50 |
| ||||
| Century | FL | s1c86z-p064b080q worm gear e2a | 20 |
| ||||
| Century | FL | Dry Film Lubricant Coating (Dicronite, MolyKote, etc.) | molykote 316 silicone release 10.3oz | 5 |
| |||
| Century | FL | mcmaster carr 95412a546 | 5 |
| ||||
| Century | FL | fastener specialty fs9-25 | 4 |
| ||||
| Century | FL | kahnetics kds22tn tips | 4 |
| ||||
| Century | FL | cab-2 | 4 |
| ||||
| Century | FL | 91271a759 | 4 |
| ||||
| Century | FL | 4c6x-s | 4 |
| ||||
| Century | FL | samtech ssq-116-02-f-d-ra-ll | 4 |
| ||||
| Century | FL | 5/16-18x4 swivel level,non skid blk ox | 4 |
| ||||
| Century | FL | abbotec at283-12 | 3 |
| ||||
| Century | FL | power dynamics 42r02-3212-150 | 3 |
| ||||
| Century | FL | hcl8-5 jumper | 2 |
| ||||
| Century | FL | fastener spec. fsu/md-1401 | 2 |
| ||||
| Century | FL | plantronics 86180-01 plantronics 86180-01 | 2 |
| ||||
| Century | FL | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain / Furnace Black | #8-32 x 2.5 | ms122199 | 155 |
| |
| Century | FL | 4 x 6 x 4mil poly bag clear layflat | 1000 |
| ||||
| Century | FL | Steel | moog 9922 to print special screw | 80 |
| |||
| Century | FL | raf 2117-440-ss () () | 100 |
| ||||
| RePneu To | MI | Panel Clips, Plastic Push-In (Pine Tree, Xmas Tree, etc.) | 1/2 | 1/2 flute fir tree-gray for m6 threaded holes 25#18 16 18 5mcase | 4000 |
| ||
| OneMonroe | NC | 17w03768 | 500 |
| ||||
| RePneu To | MI | Sleeve Anchor | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Zinc/Clear | 3/8 x 5 | 3/8 x5 sleeve anchor flat head phillips/slotted combo zinc cr+3 | 250 |
|
| RePneu To | MI | SAE Flat Washer | Grade 5 | Plain / Furnace Black | 1/2 | 1/2 sae flat s low carbon plain | 2285 |
|
| MAINSOURC | NH | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M5-0.80 x 16 | soc c/s 18-8 ss blk | 101 |
|
| RePneu To | MI | Wedge Stud Anchor | Steel | Zinc/Clear | 3/8-16x3 ultrawedge+ wedge anchor zinc cr+3 | 400 |
| |
| RePneu To | MI | Panel Clips, Plastic Push-In (Pine Tree, Xmas Tree, etc.) | Steel | Black Oxide | ct fir tree m10 blk hs | 1275 |
| |
| RePneu To | MI | Cable Clamps & Ties | Steel | Black Oxide | cable tie connector adfm blk hs | 2500 |
| |
| RePneu To | MI | Countersunk Finishing Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10 | #10 countersink 18-8 s/s finishing | 100 |
|
| RePneu To | MI | Lock Nut, Nylon Insert | Grade 5 | Zinc/Clear | 3/8-24 | 3/8-24 unf ne (standard) nylon insert locknuts fine low carbon zinc cr+3 | 2400 |
|
| RePneu To | MI | Weld Nut | Steel | Plain / Furnace Black | M8-1.25 | weld nut m8-1.25 | 3600 |
|
| RePneu To | MI | USS Flat Washer | Steel | Zinc/Yellow | 9/16 | 9/16 uss flat s med. carbon thru-hardened zinc-yellow cr+6 (import) | 100 |
|
| RePneu To | MI | Valves & Accessories | Steel | Plain / Furnace Black | valve body | 1 |
| |
| RePneu To | MI | Gloves & Hand Protection | black stallion wedlng glove large | 24 |
| |||
| RePneu To | MI | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/4 x 1 3/4 x 0.105 | 3/4 x1 3/4 x0.105 flat s 18-8 304 a2 (18-8) bbi standard | 300 |
|
| RePneu To | MI | Lag Screw | Grade 5 | Zinc/Clear | 1/4-10 x 3 1/2 | 1/4-10x3 1/2 hex lag screw low carbon zinc cr+3 | 775 |
|
| RePneu To | MI | Carriage Bolt | Grade A | Zinc/Clear | #10-24 x 2 1/2 | #10-24x2 1/2 (ft) carriage bolt a307 grade a zinc cr+3 | 105 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
