FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Cal Fastenrs | CA | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | 1/4 | 1/4 long arm hex key ball end steel progaurd finish 10912 | 7 |
| |
| MESAFAST | CA | Installation & Setting Tools | Steel | 1/4 x 7 | ceb anchor sds setting tool | 11.0 |
| |
| FastWare | Sask | Abrasive Shop Rolls, Taper Rolls, etc. | 3/4 x 2 x 3/16 80 | 3/4 x 2 x 3/16 80grit full taper cartridge roll | 105 |
| ||
| FastWare | Sask | Installation & Setting Tools | Steel | 5/8 | drop in setting tool | 4 |
| |
| FastWare | Sask | Installation & Setting Tools | Steel | 3/4 | drop in setting tool | 4 |
| |
| FastWare | Sask | Measuring Tools | Steel | Zinc/Yellow | 1.143 x 1 3/4 x 10 | 1.143 idx1 3/4 odx10 gauge machine bushing (id +0.010/+0.025) | 1,856 |
|
| FastWare | Sask | Measuring Tools | Steel | Plain | 1 1/16 x 2 1/2 x 10 | 1 1/16 idx2 1/2 odx10 gauge machine bushing c1045 hardened (id +0.010/-0.010) rc 38-45 | 1,220 |
|
| FastWare | Sask | Measuring Tools | Steel | Plain | 7/8 x 1 3/8 x 14 | 7/8 idx1 3/8 odx14 gauge machine bushing (id +0.010/+0.025) | 891 |
|
| FastWare | Sask | Measuring Tools | Steel | Zinc/Yellow | 7/8 x 1 3/8 x 14 | 7/8 idx1 3/8 odx14 gauge machine bushing (id +0.010/+0.025) | 300 |
|
| FastWare | Sask | Measuring Tools | Steel | Zinc/Yellow | 3/4 x 1 1/4 x 12 | 3/4 idx1 1/4 odx12 gauge machine bushing (id +0.010/+0.025) | 2,590 |
|
| FastWare | Sask | Measuring Tools | Steel | Zinc/Yellow | 1 1/4 x 1 7/8 x 12 | 1 1/4 idx1 7/8 odx12 gauge machine bushing (id +0.010/+0.025) | 517 |
|
| FastWare | Sask | Measuring Tools | Steel | Plain | 1 3/8 x 2 1/8 x 14 | 1 3/8 idx2 1/8 odx14 gauge machine bushing (id +0.010/+0.025) | 7 |
|
| FastWare | Sask | Measuring Tools | Steel | Plain | 1 1/8 x 1 5/8 x 14 | 1 1/8 idx1 5/8 odx14 gauge machine bushing (id +0.010/+0.025) | 38 |
|
| FastWare | Sask | Measuring Tools | Steel | Plain | 1 1/8 x 1 3/4 x 18 | 1 1/8 idx1 3/4 odx18 gauge machine bushing (id +0.010/+0.025) | 4 |
|
| FastWare | Sask | Measuring Tools | Steel | Plain | 1 3/8 x 2 1/8 x 18 | 1 3/8 idx2 1/8 odx18 gauge machine bushing (id +0.010/+0.025) | 74 |
|
| FastWare | Sask | Measuring Tools | Steel | Plain | 1 1/4 x 2 1/4 x 10 | 1 1/4 idx2 1/4 odx10 gauge machine bushing (id +0.010/+0.025) | 37 |
|
| FastWare | Sask | Measuring Tools | Steel | Zinc/Yellow | 21/32 x 1 5/16 x 10 | 21/32 idx1 5/16 odx10 gauge machine bushing | 19 |
|
| FastWare | Sask | Installation & Setting Tools | Steel | 3/8 | drop in setting tool | 1 |
| |
| FastWare | Sask | Installation & Setting Tools | Steel | 1/4 | drop in setting tool | 2 |
| |
| FastWare | Sask | Measuring Tools | Steel | Zinc/Yellow | M40 x 46 x 16 | 40 idx46 odx16 gauge flat washer | 5,032 |
|
| FastWare | Sask | Measuring Tools | Steel | Plain | 44.7 | mm idx54mm odx16 gauge flat washer | 3,464 |
|
| FastWare | Sask | Measuring Tools | 16/5 | 16/5m x 3/4 imperial/ metric tape measure | 14 |
| ||
| FasSpcMfg | FL | Sockets | 1/4 x .218 | hex skt 1/4 x .218 min (.073 min wall thickness remains) | 26 |
| ||
| FasSpcMfg | FL | Sockets | 1/4 x .218 | hex skt 1/4 x .218 | 5 |
| ||
| FasSpcMfg | FL | Sockets | 7/16 x 7/32 | head 7/16 x 7/32 5/32 hex skt | 4 |
| ||
| FasSpcMfg | FL | Sockets | 5/32 | hex socket 5/32 | 2 |
| ||
| FasSpcMfg | FL | Sockets | M6 | hex skt 6mm | 5 |
| ||
| FasSpcMfg | FL | Sockets | 1/8 | hex skt 1/8 | 4 |
| ||
| FasSpcMfg | FL | Sockets | 3/16 | hexskt 3/16 | 5 |
| ||
| FasSpcMfg | FL | Sockets | #8-32 x 1/4 | 8-32 x 1/4 socket set 1/2 dog point alloy | 95 |
| ||
| FasSpcMfg | FL | Sockets | 5/16 x 1/4 | hex socket 5/16 x 1/4 | 4 |
| ||
| FasSpcMfg | FL | Sockets | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 0-80 x 5/32 | 0-80 x 5/32 socket set full dog point 18-8 stainless | 610 |
| |
| FasSpcMfg | FL | Sockets | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 0-80 x 3/8 | 0-80 x 3/8 socket set cup point 18-8 stainless | 190 |
| |
| FasSpcMfg | FL | Sockets | 9/64 | hex skt 9/64 | 3 |
| ||
| FasSpcMfg | FL | Sockets | 3-48 x 3/4 | 3-48 x 3/4 socket set cup point alloy | 200 |
| ||
| FasSpcMfg | FL | Sockets | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 3-56 x 1 | 3-56 x 1 socket set cup point 18-8 stainless | 357 |
| |
| FasSpcMfg | FL | Sockets | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | 4-40 x 1/8 | 4-40 x 1/8 socket set cup point a286 solution annealed (ams 5731) | 15 |
|
| FasSpcMfg | FL | Sockets | 316, 317, A4 Stainless | Passivated | 4-40 x 1/8 | 4-40 x 1/8 socket set cup point 316 stainless passivated dim per dwg hdg00400110 | 5 |
|
| FasSpcMfg | FL | Sockets | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 4-40 x 5/32 | 4-40 x 5/32 socket set cup point 18-8 stainless | 90 |
| |
| FasSpcMfg | FL | Sockets | 316, 317, A4 Stainless | 4-40 x 1/8 | 4-40 x 1/8 socket set cup point 316l stainless | 16900 |
| |
| FasSpcMfg | FL | Sockets | 316, 317, A4 Stainless | 4-40 x 1/8 | 4-40 x 1/8 socket set cup point 316 stainless | 20195 |
| |
| FasSpcMfg | FL | Sockets | Ni-Cu Alloy (Monel, K-Monel, etc.) | 4-40 x 1/8 | 4-40 x 1/8 socket set cup point ni-cu 400 | 5 |
| |
| Olander | CA | Installation & Setting Tools | 1/4-28 | avk thd adaption kit-1/4-28 () | 4 |
| ||
| Olander | CA | Installation & Setting Tools | M8 | avk at series mm kit m3 m8 () () | 1 |
| ||
| Olander | CA | Installation & Setting Tools | avk power tool nose cone () () | 1 |
| |||
| Olander | CA | Service & Repair Kits | #8-32 | conversion kit for aa480n/aa510n () () | 1 |
| ||
| Olander | CA | Service & Repair Kits | conversion kit for aa480n/aa510n () () | 1 |
| |||
| Olander | CA | Service & Repair Kits | conversion kit for aa480n/aa510n () () | 3 |
| |||
| Olander | CA | Service & Repair Kits | conversion kit for aa480n/aa510n () () | 1 |
| |||
| Olander | CA | Service & Repair Kits | conversion kit for aa480n/aa510n () () | 1 |
| |||
| Olander | CA | Service & Repair Kits | conversion kit for aa480n/aa510n () () | 1 |
| |||
| Olander | CA | Service & Repair Kits | conversion kit for aa480n/aa510n tool () () | 1 |
| |||
| Olander | CA | Installation & Setting Tools | avk mandrel for aa480n/aa510n () () | 1 |
| |||
| Olander | CA | Installation & Setting Tools | avk mandrel for aa480n/aa510n () () | 1 |
| |||
| Komar | IL | Sockets | 316, 317, A4 Stainless | 1/4-20 x 1/2 1/2 | 1/4-20x1/2 soc-1/2dg(b8m-1.05%) 316ss nyl patch | 20 |
| |
| Komar | IL | Sockets | 400 Stainless (405, 410,416,420,430 etc.) | Chrome Plated | 1/4-20 x 1/2 | 1/4-20x1/2 soc knurl c/p 410 ss(12% chrome max) | 3 |
|
| Komar | IL | Sockets | Steel | Zinc/Clear | 1/4-20 x 3/4 | 1/4-20x3/4 soc knurl c/p supertanium resisto plt | 30 |
|
| Komar | IL | Sockets | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 1/4-28 x 1/4 | 1/4-28x1/4 socket set cup point w/1/16 hole drill thru broach 18-8 w/nylon patch | 80 |
| |
| Komar | IL | L-Wrenches, Allen Wrenches & Torx Wrenches | 1/4 | 1/4 short arm hex key | 500 |
| ||
| Komar | IL | Sockets | Ni-Cu Alloy (Monel, K-Monel, etc.) | 5/16-18 x 1 | 5/16-18x1 socket w/hd mark (age hard)monel k500 | 24 |
| |
| Komar | IL | Sockets | Steel | Zinc/Clear | 1/4-20 x 5/8 | 1/4-20x5/8 soc knurled supertanium resisto plt | 288 |
|
| Komar | IL | Sockets | 5/16-24 x 3/8 | 5/16-24x3/8 soc-knurl supertanium resisto plate | 1 |
| ||
| Komar | IL | Sockets | 5/16-24 x 1/2 | 5/16-24x1/2 soc-knurl supertanium-corro shield | 154 |
| ||
| Komar | IL | L-Wrenches, Allen Wrenches & Torx Wrenches | 5/16 x 6 | 5/16x6 t handle hex key | 129 |
| ||
| Komar | IL | Sockets | Ni-Cu Alloy (Monel, K-Monel, etc.) | 3/8-16 x 1/2 | 3/8-16x1/2 soc knurl c/p (age hard)monel k500 | 7 |
| |
| Komar | IL | Sockets | 3/8-16 x 3/4 | 3/8-16x3/4 soc knurl supertanium resisto plate | 30 |
| ||
| Komar | IL | Sockets | Copper | 3/8-24 x 5/8 | 3/8-24x5/8 soc-knurl-b8m-1.05% copper 316 patch | 4 |
| |
| Komar | IL | Sockets | Steel | Zinc/Clear | 5/16-24 x 5/16 | 5/16-24x5/16 soc-knurl supertanium resisto plt | 30 |
|
| Komar | IL | Sockets | 316, 317, A4 Stainless | 3/8-18 | 3/8-18 soc plug-7/8t(b8m-1.05%copper) 316 ss | 1 |
| |
| Komar | IL | Sockets | Ni-Cu Alloy (Monel, K-Monel, etc.) | 1/2-13 x 1 1/2 | 1/2-13x1 1/2 soc w/hd mark (age hard)monel k500 | 1 |
| |
| Komar | IL | L-Wrenches, Allen Wrenches & Torx Wrenches | .050 | .050 long arm hex key | 5000 |
| ||
| Komar | IL | L-Wrenches, Allen Wrenches & Torx Wrenches | .050 | .050 short arm hex key | 3000 |
| ||
| Komar | IL | Sockets | Ni-Cu Alloy (Monel, K-Monel, etc.) | 5/8-11 x 1 3/4 | 5/8-11x1 3/4 soc w/hd mark (age hard)monel k500 | 12 |
| |
| Komar | IL | Sockets | Superalloy (Inconel, Hastelloy, Alloy 20) | #6-32 x 5/8 | 6-32x5/8 soc(.187hd dia) prnacemr0175 hast c276 | 2 |
| |
| KBS | TN | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | M5ba | m5 balldriver l-wrench | 100 |
| |
| KBS | TN | L-Wrenches, Allen Wrenches & Torx Wrenches | blx8 8pc.05o-5/32 balldri.l-wrench set | 2 |
| |||
| KBS | TN | L-Wrenches, Allen Wrenches & Torx Wrenches | ltx8 8pc t9-t40 torx l-wrench set | 1 |
| |||
| KBS | TN | L-Wrenches, Allen Wrenches & Torx Wrenches | #27 | #27 tamp.resist short arm torx key | 50 |
| ||
| KBS | TN | Chisels & Punches | 1 x 18 | spline flat chisel 1 x18 | 15 |
| ||
| KBS | TN | stanley-bostitch roofing nailers | 2 |
| ||||
| KBS | TN | stanley-b.1.5 fin.stapler | 1 |
| ||||
| KBS | TN | #624-1640 | johnson 72 hardwood ibeam level#624-1640 | 4 |
| |||
| KBS | TN | Brass | 24 | 24 oz brass plumb bob cst-11-554 | 6 |
| ||
| KBS | TN | Titanium | stiletto tibone 1pc sm.face titanium | 2 |
| |||
| KBS | TN | Brass | 16 | 16 oz brass plumb bob | 12 |
| ||
| KBS | TN | johnson ib-48 48 mason level 6-vial | 3 |
| ||||
| KBS | TN | 3/4 | 3/4 break away knife | 240 |
| |||
| KBS | TN | 16 x 3.12 | marshalltown #145d mag.float 16 x3.12 | 15 |
| |||
| KBS | TN | david white true sight hand level | 9 |
| ||||
| KBS | TN | 6 x 1/8 | mason folding rule 6ft x1/8 | 6 |
| |||
| KBS | TN | Pliers | lockjaw 6 curvedjaw selfadj.pliers | 9 |
| |||
| KBS | TN | Pliers | visegrip 7 str.jaw lockingpliers | 10 |
| |||
| KBS | TN | estwing 22 oz millface framing hammer | 1 |
| ||||
| KBS | TN | Aluminum | 48 | 48 american hardwood&alum.ibeam level | 3 |
| ||
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
