FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Century | FL | Lock Nut with Tooth L/W (K-Lock, Keps, etc.) | Steel | Zinc/Yellow | #6-32 | 6-32 kep nut steel zinc yellow | 16330 |
|
| Century | FL | Self-Tapping Thread Rolling Screw | Steel | Plain | #10-14 x 1 1/2 | 3bt-p8652-00 10-14 x 1-1/2 torx pan hd plastite stlzn camcar 3bt-p8652-00 | 2581 |
|
| Century | FL | Sems Machine Screw | Steel | Zinc/Clear | #4-40 x 5/16 | 4-40 x 5/16 phillips pan hd ext sems steel zinc plt | 31909 |
|
| Century | FL | nas1351c3h16 | 54 |
| ||||
| Century | FL | Solid Rivet | Plain | 2117-t4 | nas1097ad4-5 | 388 |
| |
| Century | FL | Flat Washer | Cadmium/Yellow | 0.105 x .250 x .016 | nas1149fn316p | 2700 |
| |
| Century | FL | parker 001762-2 orifice 1/4-18 c12l14 plain (see print) rev d q2b | 140 |
| ||||
| Century | FL | Socket Head Cap Screw | null | Zinc/Yellow | #10-24 x 1 1/4 | 10-24 x 1 1/4 socket cap alloy stl zi & yel zinc/yellow | 33359 |
|
| Century | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1-8 x 3 | 1-8 x 3 socket head cap screw 18-8 | 6 |
|
| Century | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | #8-32 x 1/2 | 8-32 x 1/2 hex soc cap 18-8 black oxide | 800 |
|
| Century | FL | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain | ms21209f0620p insert screw locking | 1000 |
| ||
| Century | FL | Slotted Spring Pin (Roll Pin) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 1/8 x 5/8 | 1/8 x 5/8 roll/spring pin 420 | 407 |
|
| Century | FL | Machine Screw | Steel | Cadmium | #8-32 x 3/4 | nas602-12 pan head machine screw | 42 |
|
| Century | FL | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M8 x 40 | m8 x 40mm 18-8 flat hd soc hd cap screw din 7991 | 3023 |
|
| Century | FL | Hex Machine Bolt | Plain | ms16208-109s316 | 388 |
| ||
| Century | FL | Cable Clamps & Ties | Plain | 5/16 | nas1397p5n | 127 |
| |
| Century | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 1 1/4 | ms16995-41 screw cap sch(hex drive) 0.190-24 x 1.25 cres | 190 |
|
| MAINSOURC | NH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 3/4 | phil flat m/s 18-8 ss | 26 |
|
| SWACO | OH | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M12-1.25 x 30 | m12-1.25x30 hhcs f/t 8.8 zi-cr3 din 961 | 44 |
|
| SWACO | OH | Finished Hex Nut | Grade 5 | Zinc/Clear | 1/2-20 | 1/2-20 fin hex nut gr5 st zi cr3 | 20 |
|
| SWACO | OH | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6-1.00 x 16 | m6-1.00x16 hhcs a2ss ft din 933 | 6058 |
|
| SWACO | OH | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain | 1185-04cn280 heli-coil insert | 2849 |
| ||
| Accutite | CA | Carriage Bolt | Steel | Zinc/Clear | 1/4-20 x 1 3/4 | 1/4-20 x 1 3/4 carr bolt steel zinc | 22770 |
|
| Accutite | CA | Machine Screw | Steel | Cadmium | #4-40 x 3/8 | 4-40 x 3/8 phillips fill hd m/s steel a105 cad plated | 8460 |
|
| OneMonroe | MA | Lag Screw | Steel | Zinc/Clear | M8 x 60 | m8 x 60mm hex lag bolt-steel/zinc | 97 |
|
| GLF | OH | Carriage Bolt | Grade A | Zinc/Clear | 1/2-13 x 9 1/2 | 1/2-13 x 9-1/2 carriage bolt a307 stl zc | 5 |
|
| GLF | OH | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10 x 1 | #10 x 1 slotted pan hd s/m/s type-a 18-8 s/s | 402 |
|
| GLF | OH | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1/4-20 x 2 3/4 | 1/4-20 x 2-3/4 hhcs gr 5 stl zc | 1814 |
|
| GLF | OH | USS Flat Washer | Steel | Zinc/Clear | 5/16 | 5/16 uss flat washer stl zc | 7943 |
|
| GLF | OH | Hex Jam Nut | Steel | Zinc/Clear | M20-2.50 | m20-2.5 fin hex jam nut stl zc din 439b | 22 |
|
| NBS | IL | Flange Screw w/o serr. (Frame Bolt) | Class 12.9 | Phosphate | M12-1.75 x 40 | M12-1.75x40 cl.12.9 frame bolt-non-indented-non-serrated-black phos. & oil (taiwan) din 6921 | 10000 |
|
| Field Fas | IL | Finished Hex Nut | Grade 8 | Zinc/Yellow | 7/8-14 | 7/8-14 hex finish nut gr 8 zc/yellow | 1766 |
|
| CIF | IL | Finished Hex Nut | Grade 8 | Zinc/Clear | 1-14 | 1-14 finished hex nut grade 8 plated per znd(zinc chromate) | 134 |
|
| CIF | IL | Fully Threaded Stud (All Thread) | 316, 317, A4 Stainless | Plain | 7/8-9 x 4 1/2 | 7/8-9 x 4 1/2 full thread stud 316 stainless steel | 8 |
|
| OneMonroe | MN | Sleeve Anchor | Plain | 5/8 x 4 | 5/8 x 4 power bolt anchorpower bolt | 16 |
| |
| OneMonroe | MN | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | .125-.312 | .125-.312 ms15795 military flat washer 300 series stainless steel dfar 5000/carton | 200 |
|
| OneMonroe | MN | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4 | 3/4 ex thk fw 18-s ss.802-827 1.860-1.890/.235-265 | 2 |
|
| OneMonroe | MN | Carriage Bolt | Steel | Zinc/Clear | 3/8 x 1 | 3/8 x 1 cge bolt zp | 1380 |
|
| OneMonroe | MN | Split Lock Washer | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | 5/8 | 5/8 split l/washer-geomet | 50 |
| |
| OneMonroe | MN | Wood Screw | Plain | 1 1/2 | 50b sprocket 1-1/2 finished bore 17 hardened teeth | 12 |
| |
| OneMonroe | MN | Blind Rivet | Plain | M40 (.053-.125) | cam 40mm grip range | 4 |
| |
| OneMonroe | MN | Fully Threaded Stud (All Thread) | Silicon Bronze | Plain | 7/16-14 x 1 3/4 | 7/16-14 x 1 3/4 all thread stud c65100/c65500 silicon bronze | 4 |
|
| OneMonroe | MN | Self-Clinching Stud | Steel | Zinc/Clear | captive part #-chem4-15 close-to-edge self-clinching stud crs zinc-thread-m4/length-15m | 1145 |
| |
| OneMonroe | MN | Finished Hex Nut | Plain | M10-1.50 | m10 x 1.5 hex nut sc-1 coated | 100 |
| |
| OneMonroe | MN | Springs (Compression) | lee lc-041gh-2-mw compression spring | 24 |
| |||
| OneMonroe | MN | Heavy Hex Nut | Steel | Zinc/Clear | 5/8 | 5/8 a325 hex nut zp | 16 |
|
| OneMonroe | MN | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 5/8 x 3 1/2 | 5/8 x 3 1/2 gr8 hhc zy | 16 |
|
| OneMonroe | MN | Protective Caps & Plugs | Plastic | Plain | 6 x 2 | wheel wheel sz 6 x 2 wheel mat polyurethane on iron bearing plain tread thickness 3/8 bore sz 1-7/16 hub length 2-1/4 axle sz 1-7/16 load cap 1250lbs. | 72 |
|
| OneMonroe | MN | Hinges | Brass | 35 | heavy duty pivot hinge-brass set= top & bottom 35 0170 | 3 |
| |
| OneMonroe | MN | Compression Fittings | Brass | 3/8 x 3/8 | 3/8 x 3/8 90 deg male elbow compression-brass | 5 |
| |
| OneMonroe | MN | Round Spacer | Plain | M4.5 | metric round spacer 4.5mm rd x 3mm x 2.7mm id | 600 |
| |
| Siena | IA | Eye Bolt | Steel | Zinc/Clear | M30-3.50 x 60 | m30 x 3.5 x 60 forged llifting eye bolt zinc clear jis b1168 | 2 |
|
| Brikksen | FL | Machine Screw | Steel | Zinc/Clear | #4-40 x 3/16 | 4-40 x 3/16 phillips pan m/s steel/zinc-nylon patch | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | 5/16-18 x 1 1/2 | 5/16-18 x 1-1/2 hx hd cs 316ss | 5000 |
|
| Brikksen | FL | Shoulder Bolt (Stripper Bolt) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4 x 3/4 (#10-24) | 1/4 x 3/4 shoulder bolt s/s | inquire |
|
| Brikksen | FL | Wing Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M5-0.80 x 30 | wing screw american form a2 m5-.80 x 30 din 316 | inquire |
|
| Brikksen | FL | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M5 x 40 | dowel pin (m6 tolerance) a2 m5 x 40 din 7 | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 2 | 3/8-16 x 2 phillips pan m/s ss | inquire |
|
| Brikksen | FL | Socket Head Cap Screw | Class 12.9 | Plain | M5-0.80 x 55 | socket head cap screw partial thread m5-.80 x 55 class 12.9 steel thermal black oxide din 912 | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 316, 317, A4 Stainless | Plain | #8 x 1 1/4 | 8 x 1-1/4 phillips flat a 316ss | 85000 |
|
| Brikksen | FL | Flat Washer | Nylon (Polyamide) | Plain | 5/8 | 5/8 flat washer 1-1/4 od x .062 thk nylon 25 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 x 3/4 | 4-40 x 3/4 flat soc cs ss | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #14 x 3 | #14 x 3 square drive pan head sms type-a 18-8 ss 50 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3-0.50 x 8 | socket set screw cone point-25 per bag a2 m3-.50 x 8 din 914 | inquire |
|
| Brikksen | FL | Machine Screw | 316, 317, A4 Stainless | Plain | #8 x 1 1/4 | 8 x 1-1/4 phillips ovalal tws 316ss | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 8 x 3/4 | 8 x 3/4 ph ovalal a ss/stat bronze | inquire |
|
| Brikksen | FL | Carriage Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 2 3/4 | 3/8-16 x 2-3/4 carr bolt ss | inquire |
|
| Brikksen | FL | Tamper-Proof Security Screw (Ultra-Lok, Penta-Plus, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6-1.00 x 20 | button head cap screw torx drive w/ security pin a2 m6-1.0 x 20 torx pin iso 7380 | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 x 2 3/4 | 1/2-13 x 2-3/4 hex hd cs ss waxed | 40 |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 3 | 10-24 x 3 phillips flat head m/s 18-8 ss 50 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M5-0.80 x 35 | phillips pan head machine screw a2 ph m5-.80 x 35 din 7985 | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 1 1/2 | 6-32 x 1-1/2 phillips flat m/s ss 100 per box f-48 box | inquire |
|
| EASTERN SCREW | RI | Self-Tapping Thread Cutting Screw (types f,1,23,25) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #12-24 x 3/4 | 12-24 x 3/4 6-lobe pan type-f 18-8 | 6470 |
|
| Bossard | AZ | Flat Head Socket Cap Screw | 316, 317, A4 Stainless | Plain | 6-32 x 7/16 flt soc hd c/s ss 316 | 50 |
| |
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 4 1/2 | 7/16-14 x 4-1/2 hex head cap screw 18-8 ss 5 per small bag 5 small bags per master pack-generic brand | 400 |
|
| Optimas | IL | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 1-14 x 6 1/2 | 1-14 x 6-1/2 asme b18.2.1 hex cap screw gr 8 zinc yellow trivalent rohs | 180 |
|
| Optimas | IL | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade C | Cadmium | 3/4-10 | 3/4-10 prevailing torque lock nut grade c cad waxed (p) | 4 |
|
| Optimas | IL | Round Female/Female Standoff | Steel | Plain | 13/16 x 1 1/4 x 5/8 | 13/16 id x 1 1/4 od x 5/8 thk spacer steel per drawing (i) | 31 |
|
| Delta | TX | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1/4-20 x 5 | c/s | 262 |
|
| AFT Faste | TX | Hole Saws | 1 1/16 | 1-1/16 ct7 carbide tipped hole cutter 1 depth | 1 |
| ||
| Coburn Myers Fastening Systems | PA | Fully Threaded Stud (All Thread) | Grade B7 | Plain | fully threaded stud (all thread) a194 grade b7 plain | 3 |
| |
| AIH | AZ | Gaskets | Rubber, Buna-N, Neoprene etc. | Plain | gasket synthetic rubber | 1 |
| |
| Brikksen | FL | Flat Washer | 316, 317, A4 Stainless | Plain | M4 | flat washer for cheese head screw (reduced o.d.) a4 m4 din 433 | inquire |
|
| Brikksen | FL | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | 316, 317, A4 Stainless | Plain | 1/4-20 | 1/4-20 hex flange nut 316ss with serrations | 1000 |
|
| Brikksen | FL | Deck Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10 x 4 | #10 x 4 square flat type-17 deck screw ss | 11000 |
|
| Brikksen | FL | Machine Screw | 316, 317, A4 Stainless | Plain | 1/4-20 x 2 1/2 | 1/4-20 x 2 1/2 ph pan m/s 316ss | inquire |
|
| Brikksen | FL | External Type SH Retaining Ring | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2 | 1 1/2 external shaft ring ss shi-150sj rotor clip | inquire |
|
| Brikksen | FL | Fully Threaded Stud (All Thread) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M27-3.00 x 976 | threaded rod a2 m27-3.0 din 976 | inquire |
|
| Brikksen | FL | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain | M24-3.00 x 120 | socket head cap screw partial thread a4 m24-3.0 x 120 din 912 | 20 |
|
| Brikksen | FL | Solid Rivet | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #812 | #812 all stainless rivet | 100 |
|
| Brikksen | FL | Split Lock Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M5 | spring lock washer curved (type-a) a2 m5 type-a din 128 | inquire |
|
| Brikksen | FL | Carriage Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 x 1 1/2 | 1/2-13 x 1-1/2 carr. bolt ss | 11000 |
|
| Brikksen | FL | Wood Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #12 x 2 1/2 | #12 x 2-1/2 phillips flat head wood screw 18-8 ss 25 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10-1.50 x 130 | hex head cap screw partial thread a2 m10-1.5 x 130 din 931 | 800 |
|
| FasSpcMfg | FL | Set Screw (Square Head) | 316, 317, A4 Stainless | Plain | 1/2-13 x 1 1/4 | 1/2-13 x 1-1/4 square head set flat point 316 stainless | 34 |
|
| Empire | WA | Self-Tapping Drive Screw (type u) | Steel | Plain | #10 x 1/2 | #10 x 1/2 rnd u-drive scr | 300 |
|
| Empire | WA | Button Head Socket Cap Screw | Steel | Plain | #6-32 x 3/8 | 6-32 x 3/8 soc button cs | 1206 |
|
| Empire | WA | Set Screw (Square Head) | Steel | Plain | M8 x 50 | m8 x 50 sq. head set sc dog | 421 |
|
| Empire | WA | Hex Flange Screw w/ serr. (Whiz-Lock eq.) | Steel | Plain | 5/16 x 1 1/2 | 5/16x 1-1/2 serr h.t.flange sc | 648 |
|
| Raw Produ | NJ | Split Lock Washer | Steel | Zinc/Clear | 5/16 | split ring lock washers zinc 5/16 | 5068 |
|
| Raw Produ | NJ | Lock Nut, Center Locking, All Metal (2-Way Reversible) | Steel | Zinc/Clear | 3/4-16 | two way reversible lock nuts zinc 3/4-16 | 251 |
|
| Raw Produ | NJ | Carriage Bolt | Steel | Zinc/Clear | 3/4-10 x 5 1/2 | carriage bolts zinc 3/4-10 x 5-1/2 ft | 35 |
|
| Raw Produ | NJ | Button Head Socket Cap Screw | 316, 317, A4 Stainless | Plain | #4-40 x 3/4 | button head socket cap screws 316 ss #4-40 x 3/4 | 487 |
|
| Raw Produ | NJ | Wood Screw | Brass | Plain | #3 x 3/4 | brass slotted round head wood screws #3 x 3/4 | 500 |
|
| Raw Produ | NJ | Caulking & Sealing Compounds | #10-24 | caulk-in anchors #10-24 | 500 |
| ||
| Raw Produ | NJ | Hanger Bolt | Steel | Zinc/Clear | #10-24 x 1 1/4 | hanger bolts zinc #10-24 x 1-1/4 ft | 3538 |
|
| Raw Produ | NJ | Button Head Socket Cap Screw | Steel | Chrome Plated | 3/8-16 x 1 1/2 | button head socket cap screws chrome 3/8-16 x 1-1/2 mpb830 | 4 |
|
| Raw Produ | NJ | Heavy Hex Structural Bolt (A325, A490, 10.9) | Plain | 1-8 x 3 3/4 | structural bolts a325 plain 1-8 x 3-3/4 | 500 |
| |
| Raw Produ | NJ | Machine Screw | Brass | Plain | 1/4-20 x 3 | brass slotted flat head ms 1/4-20 x 3 | 611 |
|
| Raw Produ | NJ | Blind Rivet | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 4-3 (.126-.187) | pop rivets 304 ss 4-3 white rvt000311 | 5875 |
|
| Raw Produ | NJ | Wing Nut | Brass | Plain | 1/2-13 | brass wing nuts 1/2-13 | 125 |
|
| Raw Produ | NJ | Self-Tapping Self-Drilling Screw (Tek etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10 x 1 1/4 | phillips pan head self driller ultra stainless #10 x 1-1/4 | 250 |
|
| Raw Produ | NJ | Hex Head Cap Screw | Grade 8 | Plain | 1/4-28 x 7/8 | hex cap screws grade 8 1/4-28 x 7/8 ft | 4298 |
|
| AEROSPCE | MN | fh-440-16zi pem 1long(flush-head)self-clinching | 468 |
| ||||
| AEROSPCE | MN | Quick Access Panel Fasteners (1/4 Turn etc.) | pfc2-440-62 pem slotted drive panel fastener assy | 313 |
| |||
| AEROSPCE | MN | fh-m4-10zi pem 10mm long(flush-head)self-clinching | 35191 |
| ||||
| AEROSPCE | MN | Broaching Style Threaded Insert (Press-Nut, Swage Nut) | Plain | u-256-1 pem ref-m45938/7-02ppem miniature nut | 10000 |
| ||
| AEROSPCE | MN | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Steel | Plain | 256 | nas1130-02-15d 256 1.5dia tangless free run 304sst | 1000 |
|
| AEROSPCE | MN | Broaching Style Threaded Insert (Press-Nut, Swage Nut) | Plain | s-m4-0zi pem self-clinching nut heat treated | 22000 |
| ||
| F. Solutions | OH | Flat Washer | Steel | Cadmium/Yellow | .276 x .727 x .051 | ms27183-52 | 24 |
|
| F. Solutions | OH | Threaded Rod | 316, 317, A4 Stainless | Plain | M4-0.7-1.0 x 1 | threaded rod m4x.7-1.0x1 meter a4 | 10 |
|
| National | Ont | Finished Hex Nut | Grade 5 | Plain | 3/4-16 | 3/4-16 lh hex nut g5 | 100 |
|
| National | Ont | Sems Machine Screw | Brass | Plain | M4.2-1.41 x 20 x 6 | m4.2x1.41x20 6lob lrg pan hd sems scr br gmw16730 | 315180 |
|
| Mansco | MI | Plate Washer (Square & Rect.) | Steel | Black Oxide | 5 bottom leg plate blk e-coat | 282 |
| |
| Mansco | MI | Socket Head Cap Screw | Steel | Plain | 1/4-20 x 1 | 1/4-20x1 soc cap scr pln w/nyl patch | 90 |
|
| Mansco | MI | Socket Head Cap Screw | Class 12.9 | Zinc/Clear | M3-0.50 x 30 | M3-0.5x30 soc cap scr cl12.9 triv znc w/precote 80-per print | 6000 |
|
| AFI | FL | External Thread Insert, Self-Tapping Insert | Brass | Plain | press-in threaded inserts plain brass () | 780 |
| |
| AFI | FL | Self-Clinching Standoff | Steel | Plain | blind threaded standoffs () | 2545 |
| |
| AFI | FL | Self-Clinching Stud | Steel | Plain | flush-head self-clinching stud () | 18077 |
| |
| AFI | FL | Machine Screw | Steel | Zinc/Clear | #10-32 x 3 | 10-32x3 phil pan ms st zn () () | 800 |
|
| AFI | FL | Quick Access Panel Fasteners (1/4 Turn etc.) | wing style 1/4 turn southco 85-12-440-16 | 8 |
| |||
| Olander | CA | Round Spacer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | shaft spc ss .093-.203-.016 | 40 |
| |
| Olander | CA | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-24 x 2 1/4 hx hd sst rohs | 4 |
| |
| Olander | CA | Self-Clinching Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | self clinch spc sst rohs | 41 |
| ||
| Olander | CA | Brass | Zinc/Yellow | 3 | lyn-tron scr lock br zn ywl cr3 () () | 515 |
| |
| Olander | CA | Machine Screw | Steel | Zinc/Clear | M2-0.40 x 4 | m2-.4 x 4 phil flat patch stl blk rohs () () | 631 |
|
| Olander | CA | Machine Screw | Steel | Plain | #6-32 x 1/2 | 6-32 x 1/2 slot flat stl core nyl () () | 299 |
|
| Olander | CA | Self-Clinching Standoff | Steel | Zinc/Clear | 3 | self clinch stdf stl zn cr3 rohs () () | 700 |
|
| Olander | CA | Flat Washer | Steel | Plain | 1/4 x 1 | 1/4 x 1 f/w polypro () () | 866 |
|
| Olander | CA | 12 Point Flange Screw (CounterBore) | Steel | Zinc/Clear | M3.5 | m3.5 x 12 pt oval hd scr phil stl zin () () | 8016 |
|
| Rapid | NY | Semi-Tubular Rivet | Brass | Zinc/Yellow | .061 x 15/64 | oval head brass semi-tubular .061x15/64 cadmium & yellow chromate | 1000 |
|
| Rapid | NY | Solid Rivet | Titanium | Plain | M x 4982 | 100CTSK SHEAR HD. TITANIUM 45Cb I/A/W REV:10 3/16 X 13/16 PER AMS 4982 NAS1097U6-13 | 13.3478230769232 |
|
| Rapid | NY | Blind Rivet | Steel | Plain | 1/4 x 1 1/4 | pan head mild steel i/a/w rev a 1/4 x 1-1/4 MS35743-43 | 195.7668 |
|
| Rapid | NY | Semi-Tubular Rivet | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Zinc/Clear | x 3/8-3/8 | truss head steel semi-tubular .18-8 304 s/sx3/8x3/8 head dia.zinc/clear | 5 |
|
| Rapid | NY | Solid Rivet | Steel | Plain | modified pan head steel special 1/16x1.000 elwood/gettys | 1400 |
| |
| Rapid | NY | Blind Rivet | Aluminum | Plain | x .-.250 | lg.flange blind-alum./steel 1/8x.188-.250 grip | 1 |
|
| 3Q, Inc. | IL | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #8-18 x 1/2 | #8-18x1/2 square drive pan head painted white type-ab sheet metal screw steel zinc b18.6.4 | 126000 |
|
| Stelfast | OH | Flange Screw w/o serr. (Frame Bolt) | Grade 8 | Phosphate | 5/8-11 x 1 3/4 | 5/8-11x1-3/4 (ft) ind hex hd flange scr (frame bolt) grade-8 phos/oil | inquire |
|
| Parker | AZ | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Passivated | 3/8-24 x 3/4 | 3/8-24 x .750 flat head socket cap screw asme b18.3 .516 thread ff-s-86e w/am #4 304l 18-8 304 passivate per ms24672-27 made in u.s.a. | 3506 |
|
| Arden | WI | 2621-1210 avdel | inquire |
| ||||
| Arden | WI | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | #8 x 1 | 8x1 slotted hwh tya zc | inquire |
|
| Arden | WI | Hex Head Cap Screw | Grade 5 | Black Oxide | 3816 x 3/4 | 3816x3/4 hcs gr5 blk | inquire |
|
| BHAM | TX | Finished Hex Nut | Steel | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 1/2-13 | 1/2-13 fin hex nut fluoropolymer green b18.2.2 | 18 |
|
| FDL | IL | Wing Nut | Grade 5 | Zinc/Clear | 5/8-18 | 5/8-18 finished hex nut, grade 5 steel , zinc plated perdrawing#1536949 rev. b 500pcs/ctn & 48 cts per skid, 16.65kgs per ctn b18.2.2 | 90550 |
|
| ASFCORP | MI | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M12-1.75 x 100 | m12-1.75 x 100 hx hd cap scw cl 10.9 din 931 tri zn fe/zn 5an pkg | 1,165 |
|
| THRDFAST | OK | Fully Threaded Stud (All Thread) | Steel | Galvanized | 1/2-13 x 1 1/2 | full thread stud hdg b18.2.1 b18.31.2 | 6 |
|
| THRDFAST | AL | Hex Head Cap Screw | Grade 5 | Plain | 5/16-18 x 3 1/2 | gr5 hex c/s b18.2.1 | 49 |
|
| THRDFAST | AL | Hex Head Cap Screw | Grade 5 | Plain | 1 1/2-6 x 5 | gr5 hex c/s b18.2.1 | 2 |
|
| THRDFAST | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8 x 2 | 18-8 ss slotted indented hex washer t/s b18.6.4 | 132 |
|
| THRDFAST | MS | Socket Head Cap Screw | Class 12.9 | Plain | M4-0.70 x 10 | socket c/s | 5 |
|
| THRDFAST | OK | Headed Weld Stud, Shear Connector | Steel | Plain | 3/8-16 x 1 5/8 | headed weld stud | 1000 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
