FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| METRO BOL | MI | Sems Tapping Screw | Steel | Zinc/Black | screw & washer assembly | 4,000 |
| |
| METRO BOL | MI | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Black | tapping screw | 4400 |
| |
| METRO BOL | MI | Panel & Trim Clips (J-Clips, U-Clips) | Steel | Zinc/Black | balancing clip gm # 52500411 replacement parts chrysler 4644609 | 349,486 |
| |
| METRO BOL | MI | Panel & Trim Clips (J-Clips, U-Clips) | Steel | Zinc/Black | balancing clip gm # 52500413 replacement parts chrysler 4644607 | 332,005 |
| |
| METRO BOL | MI | Panel & Trim Clips (J-Clips, U-Clips) | Steel | Zinc/Black | balancing clip gm # 52500414 replacement parts chrysler 4644606 | 700,000 |
| |
| METRO BOL | MI | Self-Tapping Thread Rolling Screw | Steel | Zinc/Black | screw | 3,006 |
| |
| METRO BOL | MI | Nut Retainer (Cage Type, U-Type, J-Type, etc.) | Steel | Zinc/Black | u-nut | 1,350 |
| |
| METRO BOL | MI | Flat Washer | Nylon (Polyamide) | Plain | .260 ID, .687 OD, .060 THICK | nylon washer, .260 id, .687 od, .060 thick | 1,000 |
|
| Century | FL | Gas Springs, Gas Struts (Lift-O-Mat etc.) | mcmaster carr 9416k18 (50# gas spring) | 3 |
| |||
| Century | FL | click bond cs125-1032-12cr | 20 |
| ||||
| Century | FL | hvac tape 2 | 20 |
| ||||
| Century | FL | 90276a196 | 20 |
| ||||
| Century | FL | s1c86z-p064b080q worm gear e2a | 20 |
| ||||
| Century | FL | saint gobain ar10403-225wc | 20 |
| ||||
| Century | FL | killark mf-90-1 class 1 div. 1 & 2 | 19 |
| ||||
| Century | FL | rexnord 27s8-7x1ab | 34 |
| ||||
| Century | FL | abbotec atm327-20 | 32 |
| ||||
| Century | FL | fastener specialty fs9-23 | 7 |
| ||||
| Century | FL | adh-36 w 3/32 th 50a neopreme rubbe | 15 |
| ||||
| Century | FL | dks-470-3.3 m4 x 0.7 3.3 | 14 |
| ||||
| Century | FL | appleton st-9050 | 14 |
| ||||
| Century | FL | 104-2200 itw nexus # 104-22002 contoured superloc buckle | 127 |
| ||||
| Century | FL | mcmaster carr 93705a537 | 19 |
| ||||
| Century | FL | 95299e-8c-22 eq | 18 |
| ||||
| Century | FL | Steel | neopreme sheet crisscross text | 12 |
| |||
| Century | FL | ps10f8ds01bk | 12 |
| ||||
| Century | FL | fastener spec. fsu-22 | 1 |
| ||||
| Century | FL | wuss020225zi | 10 |
| ||||
| GUIDON | NJ | Hex Machine Bolt | Steel | Galvanized | 3/8-16 x 3 | A307A, HOT DIPPED GALVANIZED | 284 |
|
| GUIDON | NJ | Hex Machine Bolt | Steel | Plain | 3/8-16 x 8 | A307A | 50 |
|
| GUIDON | NJ | Hex Machine Bolt | Steel | Zinc/Clear | 3/8-16 x 8 1/2 | A307A | 25 |
|
| GUIDON | NJ | Hex Machine Bolt | Steel | Galvanized | 1/2-13 x 1 1/4 | A307A, HOT DIPPED GALVANIZED | 1,090 |
|
| GUIDON | NJ | Hex Machine Bolt | Steel | Plain | 1/2-13 x 9 | A307A, PLAIN | 5 |
|
| GUIDON | NJ | Hex Machine Bolt | Steel | Zinc/Clear | 3/4-10 x 4 1/2 | A307A, ZINC | 465 |
|
| GUIDON | NJ | Hex Machine Bolt | Steel | Plain | 3/4-10 x 3 | A307A, PLAIN | 31 |
|
| GUIDON | NJ | Hex Machine Bolt | Steel | Plain | 1 1/2-6 x 5 1/2 | A307A, PLAIN | 10 |
|
| GUIDON | NJ | Square Head Bolt | Steel | Zinc/Clear | 1/4-20 x 1 | square head machine bolt a307a | 600 |
|
| GUIDON | NJ | Square Head Bolt | Steel | Plain | 1/2-13 x 2 1/2 | square head machine bolt a307a | 125 |
|
| GUIDON | NJ | Hex Tap Bolt (Fully Threaded) | Steel | Zinc/Clear | 1/4-20 x 2 3/4 | hex head tap bolt a307a zinc | 700 |
|
| GUIDON | NJ | Hex Tap Bolt (Fully Threaded) | Steel | Zinc/Clear | 1/4-20 x 3 1/2 | hex head tap bolt a307a zinc | 100 |
|
| GUIDON | NJ | Hex Tap Bolt (Fully Threaded) | Steel | Zinc/Clear | 5/16-18 x 2 | hex head tap bolt a307a zinc | 750 |
|
| GUIDON | NJ | Hex Tap Bolt (Fully Threaded) | Steel | Zinc/Clear | 5/16-18 x 2 3/4 | hex head tap bolt a307a zinc | 25 |
|
| GUIDON | NJ | Hex Tap Bolt (Fully Threaded) | Steel | Zinc/Clear | 5/16-18 x 3 1/2 | hex head tap bolt a307a zinc | 2,900 |
|
| GUIDON | NJ | Hex Tap Bolt (Fully Threaded) | Steel | Zinc/Clear | 5/16-18 x 5 | hex head tap bolt a307a zinc | 50 |
|
| GUIDON | NJ | Hex Jam Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1-8 | finished hex | 8 |
|
| GUIDON | NJ | Hex Tap Bolt (Fully Threaded) | Steel | Zinc/Clear | 3/8-16 x 4 1/2 | hex tap bolt a307a zinc | 400 |
|
| GUIDON | NJ | Hex Tap Bolt (Fully Threaded) | Steel | Zinc/Clear | 3/8-16 x 3 1/2 | hex head tap bolt a307a zinc | 410 |
|
| GUIDON | NJ | Hex Tap Bolt (Fully Threaded) | Steel | Zinc/Clear | 3/4-10 x 4 | hex tap bolt a307a zinc | 35 |
|
| NutsBolts | NE | Metal Drill Bits | #16 | #16 wire gauge bit | 11 |
| ||
| Aztech | IL | Lock Nut, Nylon Insert | Grade A | Plain | 5/16-18 | nylon insert locknut (ne series) gr a | 123,700 |
|
| Aztech | IL | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade B | Zinc/Clear | 5/8-18 | auto locknut z/p/w | 3,373 |
|
| Aztech | IL | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade B | Plain | 5/8-18 | auto locknut gr b .0003 c/y/w | 500 |
|
| Aztech | IL | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade B | Plain | 5/8-18 | auto locknut | 6,121 |
|
| Aztech | IL | Lock Nut, Nylon Insert | Grade A | Zinc/Yellow | 5/16-18 | nyl ins locknut (ne) gr a .0003 /y | 12,680 |
|
| Aztech | IL | Lock Nut, Nylon Insert | Grade A | Zinc/Clear | 5/16-18 | nylon insert locknut (ne) gr a | 254,601 |
|
| Aztech | IL | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade B | Plain | 5/8-18 | auto locknut | 23,325 |
|
| Aztech | IL | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade B | Phosphate | 5/8-18 | auto locknut phos/oil | 500 |
|
| Aztech | IL | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade B | Plain | 5/8-18 | auto locknut | 314 |
|
| Aztech | IL | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade B | Cadmium | 5/8-18 | auto locknut cad/wax | 500 |
|
| Aztech | IL | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade C | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | 5/8-18 | auto locknut gr c geomet 321 xl | 1,100 |
|
| Aztech | IL | Lock Nut, Nylon Insert | Grade A | Zinc/Yellow | 5/16-18 | nylon insert l/n (ne series) gr a /yell | 10,613 |
|
| Aztech | IL | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade C | Phosphate | 5/8-18 | auto locknut phos/oil | 14,850 |
|
| Aztech | IL | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade B | Zinc/Yellow | 5/8-18 | auto locknut /w | 8,653 |
|
| Aztech | IL | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade C | Black Oxide | 5/8-18 | auto locknut black buckets | 19,785 |
|
| Aztech | IL | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade C | Cadmium | 5/8-18 | auto locknut cad/wax | 24,066 |
|
| Aztech | IL | Lock Nut, Center Locking, All Metal (2-Way Reversible) | Grade B | Plain | 5/8-18 | fin hex center lock | 11,840 |
|
| Aztech | IL | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade B | Zinc/Clear | 5/8-18 | gr b cone lock nut per es805-43250 | 35,833 |
|
| Aztech | IL | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade A | Zinc/Clear | 5/8-18 | fin hex c-lock gr a .0002 /4 hr bak | 285 |
|
| Aztech | IL | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade C | Plain | 5/8-18 | auto locknut gr c .0003 c/y/w-ms51943-44 | 570 |
|
| HBBOLT | CA | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Multi-Layer Zinc/Epoxy-Fluoro Top Coating (Stalgard, Primeguard+, etc.) | 1/4-20 x 3 3/8 | 1/4-20 x 3 3/8 hex washer dril-flex stalgard tek #4 point HTEKDF 1420338 | 10,400 |
|
| MESAFAST | CA | Slotted Spring Pin (Roll Pin) | Steel | Black Oxide | 1/8 x 3/4 | 1/8x3/4 spring roll pin steel black ox | 5,441.0 |
|
| HBBOLT | CA | Self-Tapping Self-Drilling Screw (Tek etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #12-14 x 1 1/2 | flat phillips undercut bi-flex s/d/s 300 ss | 1,335 |
|
| HBBOLT | CA | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Multi-Layer Zinc/Epoxy-Fluoro Top Coating (Stalgard, Primeguard+, etc.) | 1/4-20 x 3 | 1/4-20 x 3 flat / phillip / undercut / dril-flex / stalgard s/d/s FHTEKDF 14203 | 443 |
|
| HBBOLT | CA | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Multi-Layer Zinc/Epoxy-Fluoro Top Coating (Stalgard, Primeguard+, etc.) | 1/4-20 x 3 | 1/4-20 x 3 flat #3 point phillips dril-flex undercut stalgard 4pt s/d/s FHTEKUCDF 14203 | 1,000 |
|
| HBBOLT | CA | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Multi-Layer Zinc/Epoxy-Fluoro Top Coating (Stalgard, Primeguard+, etc.) | 1/4-20 x 4 | 1/4-20 x 4 flat / phillip / undercut / dril-flex / stalgard s/d/s FHTEKDF 14204 | 350 |
|
| HBBOLT | CA | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Plain | #12 x 3/4 | pan phillips, type-ab all-flex | 500 |
|
| HBBOLT | CA | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Multi-Layer Zinc/Epoxy-Fluoro Top Coating (Stalgard, Primeguard+, etc.) | 14-14 x 1 | hex washer bi-flex stalgard tek #2 point | 2,300 |
|
| HBBOLT | CA | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Multi-Layer Zinc/Epoxy-Fluoro Top Coating (Stalgard, Primeguard+, etc.) | 1/4-20 x 1 | hex washer bi-flex stalgard tek #3 point | 2,400 |
|
| HBBOLT | CA | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Multi-Layer Zinc/Epoxy-Fluoro Top Coating (Stalgard, Primeguard+, etc.) | 1/4-14 x 1 1/2 | hex washer bi-flex stalgard tek #2 point | 1,290 |
|
| HBBOLT | CA | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Multi-Layer Zinc/Epoxy-Fluoro Top Coating (Stalgard, Primeguard+, etc.) | #10-16 x 3/4 | 10-16 x 3/4 hex washer dril-flex stalgard tek #3 point HTEKDF 101634 | 2,150 |
|
| HBBOLT | CA | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Multi-Layer Zinc/Epoxy-Fluoro Top Coating (Stalgard, Primeguard+, etc.) | #12-14 x 3 | 12-14 x 3 hex washer dril-flex stalgard tek #3 point HTEKDF 12143 | 1,227 |
|
| HBBOLT | CA | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Multi-Layer Zinc/Epoxy-Fluoro Top Coating (Stalgard, Primeguard+, etc.) | #12-14 x 1 1/2 | 12-14 x 1 1/2 hex washer dril-flex stalgard tek #3 point HTEKDF 1214112 | 1,964 |
|
| HBBOLT | CA | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Multi-Layer Zinc/Epoxy-Fluoro Top Coating (Stalgard, Primeguard+, etc.) | 1/4-20 x 1 1/8 | 1/4-20 x 1 1/8 hex washer dril-flex stalgard type 4 HTEKDF 14118 | 2,230 |
|
| HBBOLT | CA | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Multi-Layer Zinc/Epoxy-Fluoro Top Coating (Stalgard, Primeguard+, etc.) | 1/4-20 x 1 1/2 | 1/4-20 x 1 1/2 hex washer dril-flex stalgard tek #4 point HTEKDF 1420112 | 5,525 |
|
| HBBOLT | CA | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Multi-Layer Zinc/Epoxy-Fluoro Top Coating (Stalgard, Primeguard+, etc.) | 1/4-20 x 2 | 1/4-20 x 2 hex washer dril-flex stalgard tek #4 point HTEKDF 14202 | 1,560 |
|
| HBBOLT | CA | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Multi-Layer Zinc/Epoxy-Fluoro Top Coating (Stalgard, Primeguard+, etc.) | 1/4-20 x 2 1/2 | 1/4-20 x 2-1/2 hex washer dril-flex stalgard tek #4 point HTEKDF 1420212 | 5,000 |
|
| HBBOLT | CA | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Multi-Layer Zinc/Epoxy-Fluoro Top Coating (Stalgard, Primeguard+, etc.) | 5/16-24 x 1 1/2 | 5/16-24 x 1-1/2 hex washer dril-flex stalgard tek #4 point (3/8 hd) HTEKDF 51624112 | 748 |
|
| HBBOLT | CA | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Multi-Layer Zinc/Epoxy-Fluoro Top Coating (Stalgard, Primeguard+, etc.) | 1/4-20 x 4 | 1/4-20 x 4 hex washer dril-flex stalgard tek #4 point HTEKDF 14204 | 555 |
|
| HBBOLT | CA | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Multi-Layer Zinc/Epoxy-Fluoro Top Coating (Stalgard, Primeguard+, etc.) | #12-24 x 1 3/4 | 12-24 x 1-3/4 hex washer dril-flex stalgard tek #5 point HTEKDF5 1224134 | 8 |
|
| HBBOLT | CA | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Plain | #12-24 x 2 13/16 | bi-flex, flat remr tek, #5 point, #3 phillips 300ss | 500 |
|
| HBBOLT | CA | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Plain | #12-24 x 1 3/4 | wafer reamer tek, tek 4, w/wings, | -60 |
|
| ISSCO | MO | Electronic Components | Rubber, Buna-N, Neoprene etc. | Plain | 3/16 x 7/16 x 1/4 | grommet .1875 id x 7/16 od x 5/16 groove dia x .125 groove wd x 1/4 thk | 2150 |
|
| System 22 | PA | Heavy Hex Nut | Grade B7M | Plain | 5/8-11 | ASTM A194 7M USA | 8072 |
|
| System 22 | PA | Finished Hex Nut | Ni-Cu Alloy (Monel, K-Monel, etc.) | Plain | M20 x 2.5 | Din 934 Monel 400 | 1501 |
|
| JFI | CA | Tapered Pin | Steel | Plain | 0 x 1 1/4 | 700 |
| |
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
