FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Century | FL | Quick Release Pin, Spring-Loaded Pin | Plain / Furnace Black | 1/4 x 2.00 | ms17985c420 | 250 |
| |
| Century | FL | Solid Rivet | Plain / Furnace Black | rivet rivet parker parker | 2 |
| ||
| Century | FL | Self-Clinching Standoff | Plain / Furnace Black | captive cfbsom3-12 | 13095 |
| ||
| Century | FL | Plate Nut (Nutplate, Floating Anchor Nut) | Plain / Furnace Black | 02 | b0204080-3 anchor nut | 5 |
| |
| Century | FL | Sealing Washer, Sealing Ring | Plain / Furnace Black | clss # 407950-1 rev-ring seal carleton 407950-1 | 3 |
| ||
| Century | FL | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain / Furnace Black | M16 x 50 | m16x50 soc cs a4-80 a4-80 din 912 | 75 |
|
| Century | FL | Hex Tap Bolt (Fully Threaded) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-20 x 3 | 1/4-20 x 3 hex hd tap bolt 18-8 | 150 |
|
| GLF | OH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #6-32 x 3/4 | #6-32 x 3/4 phillips flat hd m/s 18-8 s/s | 19999 |
|
| GLF | OH | Machine Screw | Steel | Zinc/Clear | #8-32 x 1 3/4 | 8-32 x 1-3/4 combo drive-truss head-machine screw-drawer pull screw-zinc | 134 |
|
| GLF | OH | Panel Clips, Plastic Push-In (Pine Tree, Xmas Tree, etc.) | Nylon (Polyamide) | Plain / Furnace Black | 5/16 x 13/16 | 5/16 x 13/16 push type retainer blk nyl 100/pk 15414 | 600 |
|
| GLF | OH | Pipe Plugs (Hex Head) | Rubber, Buna-N, Neoprene etc. | Plain / Furnace Black | M14-1.50 x 20 | m14-1.5 x 20mm oil drain plug w/rubber gasket a19279 | 25 |
|
| GLF | OH | Self-Tapping Drive Screw (type u) | Steel | Zinc/Clear | #2 x 3/16 | #2 x 3/16 round hd type-u drive screw stl zc | 3182 |
|
| GLF | OH | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 3/4-10 x 8 | 3/4-10 x 8 hhcs gr 8 stl zy | 39 |
|
| Bossard | AZ | Socket Head Cap Screw | Steel | Plain / Furnace Black | socket head cap screw | 390 |
| |
| Bossard | AZ | Broaching Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | standoff broaching stainless penn engineering | 930 |
| |
| Centennia | CO | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 1/2-13 x 6 1/2 | 1/2-13 x 6 1/2 hex c/s gr8 nc dom zn&y | 14 |
|
| Centennia | CO | Wedge Stud Anchor | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/8 x 2 1/4 | 3/8 x 2 1/4 powers 304 s.s. wedge anchor | 100 |
|
| NAPPCO | TX | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Steel | Cadmium | avk ats2-518 insert stl o/end cad (2.5m bx | 1927 |
| |
| CIF | IL | Hex Head Cap Screw | Class 10.9 | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | M20-1.50 x 190 | m20 x 1.5 x 190 hex cap screw 10.9 rolled thread drilled per print plated with magni 565 (sprayed to prevent thread damage) | 4 |
|
| CIF | IL | Flange Screw w/o serr. (Frame Bolt) | Grade 8 | ASTM F1941-10 Fe/Zn-Ni | 1/4-20 x 1/2 | 1/4-20 x 1/2 hex flange bolt grade 8 plated per tms 4521 type i (zinc nickel black) | 62447 |
|
| CIF | IL | Flange Screw w/o serr. (Frame Bolt) | Grade 8 | Black Oxide | 3/8-16 x 2 | 3/8-16 x 2 body bound bolt grade 8 black oxide | 2874 |
|
| CIF | IL | Hex Machine Bolt | Grade A | Galvanized | 1/2-13 x 1 1/2 | 1/2-13 x 1 1/2 hex machine bolt a307 hot dip galvanized | 40 |
|
| Optimas | IL | Button Head Socket Cap Screw | ASTM A574 | Zinc/Black | #10-32 x 7/16 | 10-32 x 7/16 asme b18.3 button hd socket cap screw alloy zinc black (i) | 85.999019980430603 |
|
| Hodell | OH | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 3/4-10 x 9 1/2 | 3/4-10x9 1/2 gr5 hex cap screw zinc | 4 |
|
| Brikksen | FL | Machine Screw | Plain / Furnace Black | #6 x 1 1/2 | #6 x 1-1/2 phillips flat 82 degree | 13000 |
| |
| Brikksen | FL | Split Lock Washer | Plain / Furnace Black | #6 | #6 regular split lock washer asme | 9000 |
| |
| Brikksen | FL | Countersink Cutters | Steel | 5/8-11 x 1 | 5/8-11 x 1 flat 82 degree countersink | 500 |
| |
| SWACO | OH | Self-Clinching Pin | Plain / Furnace Black | tp4-4mm-10 pem pin | 838 |
| ||
| SWACO | OH | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain / Furnace Black | 1084-3.5cn053 heli-coil insert | 4960 |
| ||
| SWACO | OH | Installation & Setting Tools | Steel | #10-32 | khef-3 tanged 10-32 installation tool | 1 |
| |
| SWACO | OH | 4439600 atlas riv938p tool | 1 |
| ||||
| Accutite | CA | Machine Screw | Steel | Zinc/Clear | M6-1.00 x 20 | m6-1.0 x 20mm phillips pan hd machine screw carbon steel zinc w/relief grinding | 2679 |
|
| AIH | AZ | Machine Screw | Plain / Furnace Black | M3-0.50 x 14 | m3-.5 x 14 phillips flat m/s | 300 |
| |
| Field Fas | IL | Round Female/Female Standoff | Plain / Furnace Black | spacer | 2 |
| ||
| OneMonroe | MN | Machine Screw | Aluminum | Plain / Furnace Black | #8-32 x 3/4 | 8-32 x 3/4 slottedround m/s aluminum | 95 |
|
| OneMonroe | MN | Gloves & Hand Protection | l | grey leather welders glove-men s large | 5 |
| ||
| OneMonroe | MN | Hex Machine Bolt | Grade A | Galvanized | 3/4-10 x 9 1/2 | 3/4-10 x 9-1/2 hot dipped galvanized astm a307a hex bolt | 14 |
|
| OneMonroe | MN | Brackets & Supports | bracketanglerev2 mntng holes8mm bld f max=1000n | 8 |
| |||
| OneMonroe | MN | Clevis Yoke Ends, Clevis Fork Joints etc. | Plain / Furnace Black | yoke swiv60mmx160mmhole 105mmx80mm | 8 |
| ||
| OneMonroe | MN | Sprockets | Plain / Furnace Black | 3/4 | 41b sprocket 3/4 plain bore 13 hardened teeth | 60 |
| |
| OneMonroe | MN | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10-32 x 3 | 10-32 x 3 slotted pan hd m/s 18-8ss | 200 |
|
| OneMonroe | MN | Hex Tap Bolt (Fully Threaded) | 316, 317, A4 Stainless | Plain / Furnace Black | 5/16-18 x 3 | 5/16-18 x 3 316 stainless steel tap bolt | 50 |
|
| OneMonroe | MN | Pliers | 6 | 6 standard long nose pliers | 1 |
| ||
| OneMonroe | MN | Cotter Pin (Split Pin) | Steel | Zinc/Clear | 5/16 x 4 | 5/16 x 4 cotter pin zp | 4 |
|
| OneMonroe | MN | Machine Screw | Steel | Black Oxide | M3-0.50 x 8 | m3-.5 x 8 phillips flat m/s stl blk ox | 4370 |
|
| OneMonroe | MN | Spring-Loaded Plunger Pin, Pop Pin | Plain / Furnace Black | cs ball plunger | 38 |
| ||
| OneMonroe | MN | Hose Clamp | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 3.5 | 3.5 nominal t-bolt hose clamp all stainless steel | 80 |
| |
| OneMonroe | MN | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #12 x 1 | 12 x 1 phillips round sts a zp | 90 |
|
| OneMonroe | MN | Grease Fittings | Plastic | Plain / Furnace Black | 8 x 2 | wheel wheel size 8x2 wheel material thermoplastic rubber on polyolefin center sealed ball bearing bore 1/2 wheel bore less bearing 1-3/16 hub length 2-3/16 load capacity 600 lbs. temp rating-40f to 180f must have zerk in hub | 20 |
|
| OneMonroe | MN | Gasket-Making Compounds | 79 | 500-1-ewr28840-01 seal gasket scv pos. 79 .021 n-8092. | 10 |
| ||
| OneMonroe | MN | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | .515 x .875 x .032 | 1/2 f/w 18-8ss .515 x .875 x .032 | 600 |
|
| OneMonroe | MN | Plastic Push-In Rivets (Plasti-Rivet etc.) | gm seat back retainer (25/per) | 1 |
| |||
| OneMonroe | MN | Pipe Cutters | Nylon (Polyamide) | nylon tube cutter | 3 |
| ||
| API | IA | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M8-1.25 x 20 | screw hhc m8x1.25x20 f/t 10.9 zncl iso 4017 | 526 |
|
| Alma Bolt | MI | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M6-1.00 x 50 | m6 x 1.0 x 50 a2 st. st. button head socket c/s din 7380 | 626 |
|
| Alma Bolt | MI | Machine Screw | Plain / Furnace Black | #10-24 x 1 | #10-24 x 1 round slotted machine screw | 30334 |
| |
| Alma Bolt | MI | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10-24 x 5/8 | #10-24 x 5/8 st. st. pan phillips m/s | 2164 |
|
| Alma Bolt | MI | Hex Head Cap Screw | Grade 8 | Plain / Furnace Black | 5/8-18 x 12 | 5/8-18 x 12 grade 8 ally hcs sae | 52 |
|
| Alma Bolt | MI | Finished Hex Nut | Plain / Furnace Black | 7/8-9 | 7/8-9 finished hex nut plain finish | 1912 |
| |
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M2-0.40 x 4 | slotted cheese head machine screw-100 per bag a2 m2-.40 x 4 din 84 | inquire |
|
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M3-0.50 x 40 | socket head cap screw partial thread a2 m3-.50 x 40 din 912 | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10-24 x 5/16 | 10-24 x 5/16 phillips pan m/s ss | inquire |
|
| Brikksen | FL | Hex Jam Nut | 316, 317, A4 Stainless | Plain / Furnace Black | M14-2.00 | hex jam nut (type-b thin) a4 m14-2.0 din 439 | 1000 |
|
| Brikksen | FL | Finished Hex Nut | Class 8.8 | Zinc/Clear | M4-0.70 | hex nut m4-.70 class 8 steel zinc din 934 | inquire |
|
| Brikksen | FL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/8-24 x 1 | 3/8-24 x 1 socket set cup point ss | inquire |
|
| Brikksen | FL | Fully Threaded Stud (All Thread) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Chrome Plated | 5/16-18 x 3 | 5/16-18 x 3 full thread stud ss chrome | inquire |
|
| Brikksen | FL | Double End Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/8-16 x 2 3/8 | 3/8-16 x 2-3/8 double end stud ss 3/8/1-3/4 | 70 |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #6-32 x 3/4 | 6-32 x 3/4 slottedflat m/s ss | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M14-2.00 x 50 | hex head cap screw full thread a2 m14-2.0 x 50 din 933 | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-20 x 1 3/4 | 1/4-20 x 1 3/4 sq flat m/s ss | inquire |
|
| Brikksen | FL | Flat Washer | Aluminum | Plain / Furnace Black | 3/8 | 3/8 flat washer 7/8 od .080 thick aluminum | 51000 |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10 x 1 1/4 | 10 x 1-1/4 phillips flat type-a 18-8ss/chrome-50 per | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/16-18 x 2 1/4 | 5/16-18 x 2-1/4 phillips pan m/s ss 773901 | 900 |
|
| Brikksen | FL | Deck Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #7 x 1 5/8 | 7 x 1-5/8 torx trim deck screw type-17 305ss/black m10 | inquire |
|
| Brikksen | FL | Cotter Pin (Split Pin) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/32 x 1 | 3/32 x 1 cotter pin ss 100 per box f-72box | inquire |
|
| Brikksen | FL | Machine Screw | 316, 317, A4 Stainless | Plain / Furnace Black | 5/16-18 x 3 1/2 | 5/16-18 x 3-1/2 phillips flat m/s 316ss | 50 |
|
| Brikksen | FL | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #8-32 | 8-32 serrated hex flange nut 18-8 ss 100 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Lock Nut, Nylon Insert | 316, 317, A4 Stainless | Plain / Furnace Black | 1/4-20 | 1/4-20 thin pattern nylon insert locknut 316ss | inquire |
|
| Brikksen | FL | Blind Rivet | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/16 (.251-.375) | #66 all stainless steel rivet long mandrel rivssd66ssbslm | inquire |
|
| EASTERN SCREW | RI | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #14 x 1 1/4 | 14 x 1-1/4 phillips pan type-b 18-8 with 1/4 lead point | 5095 |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10-24 x 1 1/2 | 10-24 x 1-1/2 slotted round head m/s 18-8 ss 100 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M6-1.00 x 50 | m6-1 x 50 phillips pan head m/s 18-8 ss 25 per small bag 5 small bags per master pack-generic brand din 7985 | 1000 |
|
| Hybroco S | MI | Machine Screw | Black Oxide | #8-32 x 3/8 | 8-32 x 3/8 hwh m/s black oxide | 9600 |
| |
| Optimas | IL | Service & Repair Kits | 2 | 2 per shim series 51463287 kit per drawing vci bag (i) | 8 |
| ||
| Optimas | IL | Lanyards | Plain / Furnace Black | 2 | right angle light 2 modes magnetic clip & lanyard yellow 3aa 4.5v 7.44 l | 11 |
| |
| Hybroco S | MI | Set Screw (Socket Head) | Plain / Furnace Black | 1/2-13 x 7/8 | 1/2-13 x 7/8 shss half dog pt black | 1200 |
| |
| Delta | TX | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/2-13 x 1 | c/s 18-8 sst | 622 |
|
| Alma Bolt | MI | Sems Machine Screw | Plain / Furnace Black | #12bsw x 2 | #12 x 2 hex wash hd sd wbsw | null |
| |
| AFT Faste | TX | Lock Nut, Flange, w/o serrations | Steel | Zinc/Yellow | 3/4-10 | 3/4-10 fr g top lock flanged nut zinc yellow | 106 |
|
| AFT Faste | TX | Hole Saws | 2 1/8 | 2-1/8 bi-metal hole saw | 10 |
| ||
| Brikksen | FL | Carriage Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-20 x 1/2 | 1/4-20 x 1/2 carriage bolt ss | 10000 |
|
| Brikksen | FL | Cushioned Pipe & Tube Loop Clamp | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 10 | #36 (2-1/4 ) cushion clamp 18-8 ss 10 per small bag 5 small bags per master pack-generic brand | 200 |
| |
| Brikksen | FL | Countersunk Finishing Washer | 316, 317, A4 Stainless | Plain / Furnace Black | #14 | #14 finish washer 316ss | 29000 |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #8-32 x 1 1/2 | 8-32 x 1-1/2 phillips truss m/s ss | 12000 |
|
| Brikksen | FL | Self-Tapping Self-Drilling Screw (Tek etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10 x 3/4 | #10 x 3/4 phillips pan head tek screw 18-8 ss 100 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M5-0.80 x 5 | socket set screw dog point a2 m5-.80 x 5 din 915 | inquire |
|
| Brikksen | FL | Flat Washer | 316, 317, A4 Stainless | Plain / Furnace Black | 7/8 | 7/8 flat washer 2 1/4od 316ss | 400 |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #14 x 1 1/2 | 14 x 1-1/2 phillips pan type-a 18-8 ss/chrome plate- | 14000 |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #12 x 1/2 | #12 x 1/2 phillips pan head sms type-a 18-8 ss 100 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/2-20 x 6 | 1/2-20 x 6 hex hd cs f593c head marking with 3 thread | 1000 |
|
| Brikksen | FL | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4-20 x 1 1/4 | 1/4-20 x 1-1/4 btn soc cs ss | 54000 |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M3.5-0.60 x 16 | slotted cheese head machine screw-50 per bag a2 m3.5-.60 x 16 din 84 | inquire |
|
| BEACON | IL | Sems Machine Screw | Steel | Zinc/Clear | 1/4-20 x 1/2 | 1/4-20 x 1/2 phillips pan head machine screw sems internal lockwasher steel trivalent zinc & 4hr bake rohs compliant | 1000 |
|
| FasSpcMfg | FL | Flat Head Socket Cap Screw | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain / Furnace Black | 1/4-20 x 3/8 | 1/4-20 x 3/8 flat head socket cap screwinconel 625 | 58 |
|
| FasSpcMfg | FL | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 5/16-18 x 2 | 5/16-18 x 2 flat head socket cap full thread 18-8 stainless | 28 |
|
| FasSpcMfg | FL | Sockets | 3/8-16 x 5/16 | 3/8-16 x 5/16 socket set 1/2 dog point alloy | 4 |
| ||
| OneMonroe | MA | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 3/4-10 x 6 1/2 | screw 3/4-10x6 1/2 coarse thread hex cap screw grade 5 zinc | 10 |
|
| OneMonroe | MA | Self-Tapping Drive Screw (type u) | Steel | Zinc/Clear | #6 x 1/2 | #6 x 1/2 zinc plated square drive coarse thread flat head screw | 6000 |
|
| OneMonroe | MA | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | #4 | #4 external tooth l/w plated | 1200 |
|
| OneMonroe | MA | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Zinc/Clear | #12-14 x 2 | flat phillips reamer sds #3 w/wing 12-14 x 2 zc | 4600 |
|
| Raw Produ | NJ | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | 1/4-20 x 1 1/2 | flat head socket cap screws black oxide 304 ss 1/4-20 x 1-1/2 | 4722 |
|
| Raw Produ | NJ | Set Screw (Socket Head) | 316, 317, A4 Stainless | Plain / Furnace Black | #8-32 x 1/2 | socket set screw 316 ss #8-32 x 1/2 | 1108 |
|
| Raw Produ | NJ | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M12-1.50 x 60 | hex cap screws-class 8.8 zinc plated steel m12-1.5 x 60mm (pt) | 226 |
|
| Raw Produ | NJ | Fender Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/2 x 2 | fender washers 304 ss 1/2 x 2 | 6401 |
|
| Raw Produ | NJ | Wood Screw | Brass | Plain / Furnace Black | #8 x 7/8 | brass slotted flat head wood screws #8 x 7/8 | 1006 |
|
| Raw Produ | NJ | Self-Tapping Screw w/ Neo Bonded Washer (Roofing/Siding/Pole Barn Screw) | Silicon Bronze | Plain / Furnace Black | #12 x 1 | tuffgrip type-17 roofing screws-bronze-#12 x 1 | 500 |
|
| Raw Produ | NJ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10-24 x 2 | phillips flat head ms 304 ss #10-24 x 2 | 610 |
|
| AEROSPCE | MN | Quick Access Panel Fasteners (1/4 Turn etc.) | 1/4 | 82-56-225-50 southco 1/4 turn stud | 622 |
| ||
| AEROSPCE | MN | so-832-12zi pem .375longref#nas1129-08-12z thruhole | 3968 |
| ||||
| AEROSPCE | MN | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain / Furnace Black | 35 | heli-coil insert# 3585-04cnw112 dry film lube | 213 |
| |
| F. Solutions | OH | Socket Head Cap Screw | Steel | Passivated | #8-32 x 3/8 | socket head cap screw 8-32 x 3/8 c276 passivated & pickled per astm a380 | 340 |
|
| F. Solutions | OH | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Plain / Furnace Black | 1-8 x 5 1/2 | heavy hex structural bolt 1-8x5 1/2 a490 domestic plain | 3 |
|
| F. Solutions | OH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10-32 x 1 | slotted flat machine screw 10-32x1 18.8 | 300 |
|
| National | Ont | spp tool part | 2 |
| ||||
| National | Ont | External Type SH Retaining Ring | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/8 | 1/8 shft ext ret ring ss | 400 |
|
| National | Ont | Turned, Ground & Polished Shafting | Phosphate | 7/32 | 7/32 shaft retainer black phosphate. | 16225 |
| |
| National | Ont | O-Rings & Quad Ring Seals (X-Rings) | Plain / Furnace Black | o-ring spray chamber neb adapter 5pk | 6 |
| ||
| Mansco | MI | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Black | #8-18 x 1 1/4 | 8-18 x 1-1/4 pan phil type-b triv blk znc | 11050 |
|
| Mansco | MI | Blind Rivet | Aluminum | Black Oxide | 3/16 x .125-.250 | 3/16x.125-.250 grip prot dome hd alum/alum black panted blind rivet ad64abs154 | 29990 |
|
| Mansco | MI | Hex Tap Bolt (Fully Threaded) | Grade A | Zinc/Clear | 5/16-18 x 3 hex tap bolt a307-a triv znc | 125 |
| |
| Mansco | MI | Shoulder Washer (Screw Insulator) | Fiber | Plain / Furnace Black | .266 x 7/3 | .266x7/32 shoulder washer 33% glass fiber nylon black | 48000 |
|
| Mansco | MI | Ball Bearings, Balls, Bearing Mounts | Silicon Bronze | Painted | .4385 x .627 x 5/16 | .4385 idx.627 odx5/16 flanged bearing bronze | 2212 |
|
| AFI | FL | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Brass | Plain / Furnace Black | molded in insert blind brass per print () | 1019182 |
| |
| AFI | FL | screw & nut kit () | 2053 |
| ||||
| AFI | FL | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain / Furnace Black | miniature self locking nut () | 904 |
| |
| AFI | FL | Flange Nut, Non-locking | Class 8.8 | Zinc/Clear | M10-1.00 | m10-1.00 hex flange nut c8 st zn () | 1700 |
|
| AFI | FL | Self-Clinching Stud | Steel | Plain / Furnace Black | flush head studs () | 3214 |
| |
| Global Fa | TX | card-o-pull bivar cp-86-tp | 50 |
| ||||
| Olander | CA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 12-24 x 5/8 ph flat sst rohs | 10 |
| |
| Olander | CA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 8-32 x 2 3/4 phil flat sst rohs | 61 |
| |
| Olander | CA | Semi-Tubular Rivet | Aluminum | Plain / Furnace Black | 1/16 x 7/64 semi tube oval hd rivet | 55 |
| |
| Olander | CA | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 12-14 x 1 3/4 phil flat t-b sst rohs | 254 |
| |
| Olander | CA | Round Spacer | Aluminum | Zinc/Clear | #4 x 3/8 x 5/16 rd spacer alum non-rohs | 104 |
| |
| Olander | CA | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | #8-32 x 1 | 8-32x1 slotted hwh stl zn non-rohs () | 2169 |
|
| Olander | CA | Self-Clinching Standoff | Steel | Zinc/Clear | self clinch standoff stl zn non-rohs () | 1335 |
| |
| Olander | CA | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #6-32 x 1 3/4 | 6-32x1 3/4 soc cap sst () | 503 |
|
| Scrooscoop | CA | Self-Tapping Self-Piercing Screw | Steel | Painted | #6-18 x 3/8 | #6-18 x 3/8 self-piercing screws, 1/4 indented hex washer head slotted, twin lead, full thread, sharp point, steel zinc pltd, head painted white | 1,072,805 |
|
| F. Solutions | OH | Heavy Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/8-16 | heavy hex nut 3/8-16 304 | 150 |
|
| F. Solutions | OH | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/2-13 x 3/4 | socket set screw cup point 1/2-13x3/4 18.8 ss | 272 |
|
| SPC | TX | Lock Nut, Top Locking, All Metal (Automation style, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #10-32 | 10-32 light hex thin height flexslot 18-8 s/s steel w/wax | 7800 |
|
| Parker | AZ | Button Head Socket Cap Screw | Brass | Plain / Furnace Black | #10-24 x 2 | 10-24x2 button head socket cap screw asme b18.3 fully threaded 260 brass plain made in u.s.a. | 260 |
|
| Parker | AZ | m2.5c25kcs/grd12.9yz made in u.s.a. | 11100 |
| ||||
| F. Solutions | OH | Pipe Plugs (Square Head) | Plastic | Plain / Furnace Black | snap in square plug 3/4 black durometer 50d plastic | 1,000 |
| |
| Arden | WI | Machine Screw | Steel | Black Oxide | 3816 x 1 1/2 | 3816x1 1/2 unslotted hwh ms blk | inquire |
|
| Arden | WI | Set Screw (Socket Head) | Steel | Plain / Furnace Black | 5618 x 5/16 | 5618x5/16 hxsoc set cup w/pat | inquire |
|
| THRDFAST | AL | Metal Drill Bits | Steel | Black Oxide | #52 | h.s. jobber drill bit xgo black & gold | 9 |
|
| THRDFAST | OK | Lag Screw | Steel | Plain / Furnace Black | 3/8 x 4 | hex lag bolt | 150 |
|
| THRDFAST | FL | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 3/4-10 x 2 | 18-8 ss button soc c/s b18.3 | 2 |
|
| THRDFAST | OK | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1/4 | ms15795-810 18-8 s 304ss b18.22.1 | 33 |
|
| THRDFAST | AL | Wood Screw | Steel | Plain / Furnace Black | #8 x 1 | #8x1 flat phil twin fast w/s b18.6.1 | 4509 |
|
| BRIGHBEST | IL | Hex Jam Nut | Grade 5 | Plain / Furnace Black | 1/4-20 | 1/4-20 gd 5 hex jam nut pl | 112000 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | ASTM A320 L7, L7M | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 7/8-9 x 8 | 7/8-9x8 astm a320 l7 all thread stud tfe black | 664 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B8M | Plain / Furnace Black | 1/2-13 x 9 3/4 | 1/2-13x9-3/4 astm a193 b8m 1 all thread stud | 711 |
|
| Lightning | LA | Threaded Rod | Grade A36 | Galvanized | 2-4 1/2 x 12 | ft astm a36 all thread rod hot dipped | 32 |
|
| Lightning | LA | Finished Hex Nut | Brass | Plain / Furnace Black | 3/4-10 | hex nut | 78 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
