FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Century | FL | External Type SH Retaining Ring | Steel | Plain | ms16624-1137 retaining ring | 61 |
| |
| Century | FL | Flat Washer | Plain | .203 x .438 x .031 | nas1515h3l | 67 |
| |
| Century | FL | Shoulder Bolt (Stripper Bolt) | Steel | Zinc/Clear | mg3-1.00 x 12 slotted torx pan head zinc w/shoulder (m3.5 hd) camcar camcar | 35 |
| |
| Century | FL | SAE Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | .125 x .3125 x .033 | #4 sae flat washer .3125x.125x.033 18-8 18-8 | 7077 |
|
| Century | FL | Socket Head Cap Screw | null | Cadmium | 1/4-20 x 1 | nas1352-4-16p socket cap screw | 430 |
|
| Century | FL | Socket Head Cap Screw | Cadmium/Yellow | 3/8-24 x 1 3/4 | ms16998-77 | 9 |
| |
| Century | FL | Hex Female/Female Standoff | Plain | nas1831c5d19 | 2 |
| ||
| Century | FL | Protective Caps & Plugs | 5 | caplug w-5 pe-ld01 red002red tapered caps and plugs with wide flanges | 100 |
| ||
| Centennia | CO | Hex Machine Bolt | Grade A | Galvanized | 1/2-13 x 7 | 1/2-13 x 7 nc a307a hex mach bolt hdg | 8 |
|
| Centennia | CO | Machine Screw | Steel | Zinc/Clear | 1/4-20 x 1 1/4 | 1/4-20 x 1 1/4 slottedflat m/s zinc | 12 |
|
| Centennia | CO | Key Stock | 5/16 x 12 | 5/16 x 12 key stock | 8 |
| ||
| Kanebridge | IL | Self-Tapping Thread Cutting Screw (types f,1,23,25) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 3/4 | 3/8-16x3/4 unslotted hx wh full thread type-f 18-8 stainless steel thread cutting screws | 5000 |
|
| CIF | IL | Lock Nut, Flange, w/o serrations | Grade 8 | Phosphate | 1 3/4-12 | 1 3/4-12 hex flange locknut grade 8 phos coated and locked | 58 |
|
| Optimas | IL | Gaskets | Rubber, Buna-N, Neoprene etc. | Plain | M22 | 22mm wd x 38mm lg x 0.79mm thk oil drain gasket rubber w/adhsve per dwg ppap | 1903260803222702 |
|
| SWACO | OH | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | #10 | #10 ext tth lock washer stl zpy | 12300 |
|
| SWACO | OH | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain | 3585-04en168 heli-coil insert | 689 |
| ||
| SWACO | OH | Socket Head Cap Screw | Class 10.9 | Plain | M6-1.00 x 25 | m6-1.00x25 low hd sock caps 10.9 st | 508 |
|
| SWACO | OH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 1/4 | #6-32x1/4 ph pan ms 18-8ss pln | 55119 |
|
| Field Fas | IL | Lock Bolt with Collar (HuckBolt etc.) | Plain | huck 500221 screw | 8 |
| ||
| AIH | AZ | Machine Screw | Steel | Zinc/Clear | #8-32 x 3/16 | phil pan m/s | 9761 |
|
| NBS | IL | Drywall Screw | Steel | Phosphate | #8 x 3 | #8x3 phillips bugle head drywall screw-unc thread-black phos. | 25000 |
|
| NBS | IL | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Phosphate | M16-2.00 x 90 | M16-2.0x90 cl.10.9 frame bolt-non-indented-non-serrated-black phos. & oil (taiwan) din 6921 | 10000 |
|
| NBS | IL | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/32 x 11/16 | 3/32x11/16 18-8 s/s steel dowel pin-asme b18.8.2-bright finish | 25000 |
|
| NBS | CA | Flange Screw w/o serr. (Frame Bolt) | Grade 5 | Zinc/Clear | 3/8-16 x 2 3/4 | 3/8-16 x 2-3/4 gr.5 frame bolt-non-indented-non-serrated-trivalent rohs (taiwan) | 10000 |
|
| NBS | IL | Flange Screw w/o serr. (Frame Bolt) | Grade 8 | Zinc/Yellow | 5/16-18 x 2 | 5/16-18x2 grade 8 frame bolt-non-indented-non-serrated-zinc yellow (taiwan) | 10000 |
|
| NBS | IL | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Zinc/Yellow | M8-1.25 x 90 | M8-1.25x90 cl.10.9 frame bolt-non-indented-non-serrated-zinc yellow iso 4162 | 10000 |
|
| Field Fas | IL | 3m windo-weld super fast urethane 10.5 | 24 |
| ||||
| OneMonroe | MN | Finished Hex Nut | Grade 8 | Zinc/Yellow | 1/2-20 | 1/2-20 nf gr8 hx nuts zy | 68 |
|
| OneMonroe | MN | Sprockets | Plain | 1 3/16 | 50b sprocket 1-3/16 finished bore 16 teeth | 4 |
| |
| OneMonroe | MN | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 x 1/4 | ms51959-13 dfars 252.225-7014 applies dfars certification and material origin informaton must accompany shipment from supplier to ef and ef to customer. | 40 |
|
| OneMonroe | MN | Handles | t handle latch | 6 |
| |||
| OneMonroe | MN | Socket Head Cap Screw | ASTM A574 | Black Oxide | #5-44 x 3/8 | #5-44 x 3/8 black oxide alloy steel socket cap screw | 82 |
|
| OneMonroe | MN | Metal Drill Bits | Steel | #58 | hss job 118deg #58 | 4 |
| |
| OneMonroe | MN | Button Head Socket Cap Screw | Steel | Plain | M12-1.75 x 50 | m12 x 1.75 x 50 btn skt hd c/s-pln-holo krome | 25 |
|
| OneMonroe | MN | Ball Bearings, Balls, Bearing Mounts | Plain | brgrllr1/2x1 3/16x2 | 50 |
| ||
| OneMonroe | MN | Grommets & Eyelets | Nylon (Polyamide) | nylon screw grommet | 1.64 |
| ||
| OneMonroe | MN | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #2-56 x 5/16 | 2-56 x 5/16 ph pan m/s 18-8ss bkps | 187 |
|
| OneMonroe | MN | Slotted Hex Nut | Grade 5 | Zinc/Clear | 1-8 | 1-8 grade 5 zinc hex slotted nut | 9 |
|
| OneMonroe | MN | Hinges | Galvanized | 36 | hinge plate 36 galv | 2 |
| |
| OneMonroe | MN | Socket Head Cap Screw | Class 12.9 | Plain | M6 x 80 | m6 x 80 shc 12.9 | 25 |
|
| OneMonroe | MN | Dowel Pin | Plain | 1/16 x 7/16 | 1/16 x 7/16 dowel pin | 1950 |
| |
| Alma Bolt | MI | Machine Screw | Plain | 3/8-16 x 5/8 | 3/8-16 x 5/8 round slotted machine screw | 1100 |
| |
| Alma Bolt | MI | Square Head Bolt | Grade 2 | Plain | 1-8 x 3 | 1-8 x 3 square head bolt grade 2 | 157 |
|
| Alma Bolt | MI | Socket Head Cap Screw | null | Plain | 1-8 x 10 | 1-8 x 10 special alloy socket hd cap screw | 8 |
|
| Alma Bolt | MI | Plow Bolt, Scraper Blade Bolt | Grade 8 | Plain | 1/2-13 x 2 | 1/2-13 x 2 plow bolt gr8 flat head | 317 |
|
| Brikksen | FL | Hex Flange Screw w/ serr. (Whiz-Lock eq.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | 5/16-18 x 3 | 5/16-18 x 3 serrated flange bolt 18-8ss black oxide | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 5/8 | 1/4-20 x 5/8 phillips ovalal m/s ss | inquire |
|
| Brikksen | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16 | 7/16 flat washer (marine grade) .500 id x 1.125 od .062 thk 18-8 ss 50 per small bag 5 small bags per master pack-generic brand | 5000 |
|
| Brikksen | FL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #5-40 x 1/4 | 5-40 x 1/4 soc set cup ss | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 1/2 | 10-32 x 1/2 slottedround m/s ss | 6000 |
|
| Brikksen | FL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M8-1.25 x 50 | socket set screw cup point a2 m8-1.25 x 50 din 916 | inquire |
|
| Brikksen | FL | Hex Tap Bolt (Fully Threaded) | Steel | Plain | 5/16-18 x 3 | 5/16-18 x 3 hex tap bolt dich | inquire |
|
| Brikksen | FL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10-1.50 x 20 | socket set screw cone point-5 per bag a2 m10-1.5 x 20 din 914 | inquire |
|
| Brikksen | FL | Self-Tapping Self-Drilling Screw (Tek etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 1 | 1/4-20 x 1 hwh alumiflex tek #4 18-8 | inquire |
|
| Brikksen | FL | Lock Nut, Top Locking, All Metal (Automation style, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M16-2.00 | all metal lock nut a2 m16-2.0 din 980v | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 1 | 1/4-20 x 1 hex head cs 18-8ss with everlube 6108 satin black finish | inquire |
|
| Brikksen | FL | Machine Screw | 316, 317, A4 Stainless | Plain | 3/8-16 x 2 1/2 | 3/8-16 x 2 1/2 phillips truss m/s 316 ss | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8 x 1 1/4 | 8 x 1-1/4 ph pan a ss #6 head/chrome- | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | 9/16-12 x 4 | 9/16-12 x 4 hex head cs 316ss | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #14 x 1/2 | 14 x 1/2 phillips pan type-a ss re-s flat black re-s flat black | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 2 | 5/16-18 x 2 phillips ovalal m/s ss | 10000 |
|
| Brikksen | FL | Cushioned Pipe & Tube Loop Clamp | Aluminum | #28 (1-3/4 ) cushion clamp aluminum | inquire |
| ||
| Brikksen | FL | Coiled Pin (Spiral Spring Pin) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3 x 18 | spiral pin (coiled pin) a2 m3x18 din 7343 | 800 |
|
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3-0.50 x 30 | socket head cap screw partial thread a2 m3-.50 x 30 din 912 | 1000 |
|
| Brikksen | FL | Carriage Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 3/4 | 3/8-16 x 3/4 carriage bolt ss | 11000 |
|
| EASTERN SCREW | RI | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #14 x 1 1/4 | 14 x 1-1/4 phillips flat type-ab 18-8 100ksi | 99380 |
|
| Bossard | AZ | stud flush stainless penn engineering | 7967 |
| ||||
| Bossard | AZ | Signs & Labels | wht label self lam | 120000 |
| |||
| Optimas | IL | Machine Screw | Class 4.8 | Zinc/Clear | M3-0.50 x 5 | m3-.5 x 5mm phillips pan m/s cl 4.8 zinc trivalent rohs compliant din 7985 | 16000 |
|
| Optimas | IL | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | M8-1.25 x 74.15 | M8-1.25x74.15 hex flange screw cl10.9 magni565 matpoint per drawing ppap | 81275 |
|
| American | WI | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2 | 1/2 flat washer #18-8 ss (1-1/4 od x 3/16 thk) | 60 |
|
| American | WI | 3/4x13 acrylic-tie screen #18-8 ss ats7513 | 11 |
| ||||
| American | WI | Pipe Coupling, Pipe Connector | 3/8 | 3/8 merchant half pipe coupling black | 100 |
| ||
| American | WI | Blind Rivet | Aluminum | Plain | 1/8 (126-.250) | 1/8x.126-.250 alum/alum close end rivet ab4-4acld rivpab4-4acld | 4550 |
|
| Delta | TX | Socket Head Cap Screw | null | Plain | 1/2-13 x 2 3/4 | soc hd c/s alloy 1/2-13 x 2 3/4 | 70 |
|
| AFT Faste | TX | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M12-1.75 x 70 | M12-1.75x70 hex head cap screw 10.9 zp din 933 | 175 |
|
| Coburn Myers Fastening Systems | PA | USS Flat Washer | Steel | Galvanized | uss flat washer carbon steel galvanized | 130.5 |
| |
| AIH | AZ | Socket Head Cap Screw | Steel | Plain | shcs | 628 |
| |
| AIH | AZ | Electrical Wires & Cables | 24 | 24 AWG Wire 4 Cond M27500-24SP4T23 | 5626 |
| ||
| Brikksen | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | M30-3.50 x 130 | hex head cap screw partial thread a4 m30-3.5 x 130 din 931 | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10 x 2 | 10 x 2 slottedhex washer type-a ss | 200 |
|
| Brikksen | FL | Countersunk Finishing Washer | 316, 317, A4 Stainless | Plain | #8 | #8 flanged finish washer 316ss 100 per box | inquire |
|
| Brikksen | FL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3-0.50 x 16 | socket set screw flat point-50 per bag a2 m3-.50 x 16 din 913 | inquire |
|
| Brikksen | FL | Fender Washer | 316, 317, A4 Stainless | Plain | 1/4 x 1 1/2 x .062 | 1/4 x 1-1/2 x .062 fender washer 316ss | 9000 |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M4-0.70 x 60 | slotted cheese head machine screw-25 per bag a2 m4-.70 x 60 din 84 | inquire |
|
| Brikksen | FL | Split Lock Washer | 316, 317, A4 Stainless | Plain | 3/4 | 3/4 med split lockwasher 316ss .188 min thk | 1000 |
|
| Brikksen | FL | Fully Threaded Stud (All Thread) | 316, 317, A4 Stainless | Plain | 1-8 x 12 | 1-8 x 12 full thread stud 316ss | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 4 | 7/16-14 x 4 hex hd c/s s/s f593c | 800 |
|
| Brikksen | FL | Lag Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16 x 1 | 5/16 x 1 hex lag screw 18-8 ss 25 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M16-2.00 x 60 | hex head cap screw full thread a2 m16-2.0 x 60 din 933 | 40 |
|
| Hewes | NY | Dowel Pin | Steel | Plain | 1/4 x 1/2 | 1/4x 1/2 dowel pin holo-krome #01040 | 100 |
|
| FasSpcMfg | FL | Machine Screw | Silicon Bronze | Plain | 1/4-20 x 1/2 | 1/4-20 x 1/2 slotted pan head machine screw silicon bronze | 5 |
|
| FasSpcMfg | FL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 3/4 | 3/4-10 x 3/4 socket set flat point 304 stainless | 2 |
|
| OneMonroe | MA | T-Nut (Tee Nut) | Brass | Nickel Plated | #10-32 | 10-32 round base tee nut hd dia-.531 x oal ht-.375 barrel dia-.250 x ht-.250 brass nickel finish | 1410 |
|
| OneMonroe | MA | Shoulder Bolt (Stripper Bolt) | Steel | Plain | 1/4 x 1 1/4 (#10-24) | 1/4 x 1 1/4 shoulder bolt | 270 |
|
| OneMonroe | MA | Socket Head Cap Screw | Steel | Zinc/Clear | M10-1.25-1.25 x 140 | m10-1.25 x 140m soc. cap screw zinc | 10 |
|
| OneMonroe | MA | Machine Screw Washer | Steel | Nickel Plated | #8 | #8 mach screw washer steel/nickel | 9800 |
|
| OneMonroe | MA | Machine Screw | Steel | Zinc/Clear | 1/4-20 x 2 1/2 | 1/4-20 x 2 1/2 slottedflat m/s pkg plated pkg qty 100 carton 5 | 885 |
|
| OneMonroe | MA | Nut Retainer (Cage Type, U-Type, J-Type, etc.) | Steel | Zinc/Clear | #10-32 | 10-32 j-type nut retainer st z | 2380 |
|
| Brikksen | FL | Threaded Rod | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M27-3.00 | threaded rod a2 m27-3.0 din 975 | inquire |
|
| Empire | WA | Flange Screw w/o serr. (Frame Bolt) | Grade 8 | Plain | 1/2-13 x 2 | 1/2-13 x 2 gr8 flange sc p | 50 |
|
| Empire | WA | Button Head Socket Cap Screw | Steel | Plain | 3/8-16 x 1 1/2 | 3/8-16 x 1-1/2 soc button cs | 16 |
|
| Empire | WA | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | Steel | Plain | 5/16-18 | 5/16-18 serr. flng l/n | 14000 |
|
| Raw Produ | NJ | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-28 x 1 1/2 | flat head socket cap screws 304 ss 1/4-28 x 1-1/2 | 282 |
|
| Raw Produ | NJ | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #12 x 4 | square drive pan head sms 304 ss #12 x 4 | 44 |
|
| Raw Produ | NJ | Hex Tap Bolt (Fully Threaded) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2-13 x 2 3/4 | hex tap bolts 304 ss 1/2-13 x 2-3/4 | 64 |
|
| Raw Produ | NJ | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 1 3/4 | button head socket cap screws 304 ss #6-32 x 1-3/4 | 3379 |
|
| Raw Produ | NJ | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M5-0.80 x 25 | metric socket cap screws a2 ss m5 x .8 x 25m ft | 1313 |
|
| Raw Produ | NJ | Tooth Lock Washer (Int. & Ext.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 1/2 | external tooth lock washers 410 ss 1/2 | 876 |
|
| Raw Produ | NJ | Finished Hex Nut | Grade 2 | Zinc/Clear | 7/8-9 | hex finish nuts grade 2 zinc 7/8-9 | 239 |
|
| Raw Produ | NJ | Self-Tapping Sheet Metal Screw (types a,b,ab) | 316, 317, A4 Stainless | Plain | #10 x 1/2 | phillips pan head sms 316 ss #10 x 1/2 | 1874 |
|
| AEROSPCE | MN | Self-Clinching Stud | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 5/8 x 400 | fh4-832-10 pem .625lg(flush-head)400series sst stud | 1705 |
|
| AEROSPCE | MN | Blind Rivet | Aluminum | Plain | M20 (1.126-1.250) | tps-6mm-20 pop rivet 20mmlong(flush-head)6mm dia pilotpin tps-6mm-20 | 2124 |
|
| AEROSPCE | MN | fhl-832-4zi pem .250long(low-displacement head)stud | 6820 |
| ||||
| F. Solutions | OH | Fully Threaded Stud (All Thread) | Grade B7M | Plain | 7/16-14 x 1 3/4 | full thread stud 7/16-14x1-3/4 a193 b7m | 4 |
|
| F. Solutions | OH | F436 Round Structural Washer | Steel | Galvanized | 1 | flat 1 f436 mech galv domestic | 118 |
|
| Mansco | MI | Nails | Steel | Galvanized | 23 a x 1 9/16 | 23 gax1-9/16 headless nail 10m/box | 4 |
|
| AFI | FL | Carriage Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 3/4 | 5/16-18x3/4 carriage bolt ss () () | 1236 |
|
| AFI | FL | Machine Screw | Steel | Zinc/Clear | #12-24 x 3/8 | 12-24x3/8 phil pan ms st zn rohs () () | 675694 |
|
| AFI | FL | Self-Tapping Drive Screw (type u) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4 x 3/16 | #4x3/16 round hd u-drive ss () () | 2500 |
|
| AFI | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10 | m10 flat washer regular ss din 125a () | 3718 |
|
| Global Fa | TX | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 x .224 | 4-40x.224 ss in heli-coilininsertinternal/locking heli-coil 3585-04cn-0224 | 400 |
|
| Olander | CA | Socket Head Cap Screw | ASTM A574 | Plain | m4-.7 x 16 low head soc cap 8.8 alloy | 76 |
| |
| Olander | CA | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | 4 int tooth l/w stl blk rohs | 669 |
| |
| Olander | CA | Set Screw (Socket Head) | Steel | Plain | 10-32 x 3/8 soc set oval pt alloy | 175 |
| |
| Olander | CA | Captive Panel Screw | captv pnl scr () () | 7 |
| |||
| Olander | CA | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 2 1/4 | 3/4-10 x 2 1/4 soc cap sst rohs () () | 38 |
|
| Olander | CA | Socket Head Cap Screw | ASTM A574 | Plain | #4-40 x 5/8 | 4-40 x 5/8 soc cap spline alloy () () | 463 |
|
| EGW USA | TX | Hex Machine Bolt | Grade A | Plain | 3/4-10 x 4 | hex bolt 3/4-10x4 a307 gra p | 1600 |
|
| Parker | AZ | Flat Head Socket Cap Screw | Superalloy (Inconel, Hastelloy, Alloy 20) | Passivated | 3/8-16 x 1.0 | 3/8-16x1.0 flat socket head cap screw .766 threads a286 super alloy passivate w/patch per ff-s-86e per eb1890 made in u.s.a. | 115 |
|
| Pac Bolt | BC | Lag Screw | Grade A | Galvanized | 5/8 x 6 | 5/8 x 6 a307 hex lags galv import | 1735 |
|
| Arden | WI | Sems Machine Screw | Steel | Zinc/Clear | #8-32 x 3/8 | 832x3/8 phillips pn ms sqcn sems zc | inquire |
|
| THRDFAST | OK | F436 Round Structural Washer | Steel | Plain | 3/8 | f436 type-1 hardened rd wshr b18.2.6 | 42 |
|
| THRDFAST | MS | Machine Taps | #6-32 | taper tap | 3 |
| ||
| THRDFAST | FL | Carriage Bolt | Grade 5 | Zinc/Clear | 1/2-13 x 5 1/2 | c/b b18.5 | 4 |
|
| THRDFAST | AL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 1/2 | 18-8 ss slotted flat m/s b18.6.3 | 16 |
|
| THRDFAST | OK | Fully Threaded Stud (All Thread) | Grade B7 | Zinc/Clear | 7/8-9 x 6 | a193 b7 a/t stud domestic b18.2.1 b18.31.2 | 4 |
|
| Lightning | LA | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B | Plain | 1-8 x 5 1/2 | 1-8x5-1/2 a307 gr. b heavy h/b plain | 34 |
|
| Lightning | LA | Socket Head Cap Screw | Class 12.9 | Plain | M22-2.50 x 220 | socket c/s | 710 |
|
| Lightning | LA | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Galvanized | 7/8-9 x 2 1/4 | a325 heavy h/b hdg hot dipped | 458 |
|
| Lightning | LA | Socket Head Cap Screw | Class 12.9 | Plain | M8-1.00 x 80 | socket c/s fine | 340 |
|
| Lightning | LA | Threaded Rod | Grade B7 | Galvanized | 7/16-14 x 12 | ft a193 b7 all thread rod hot dipped | 790 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
