FCH Member Advertisement
FCH News
Studs & Threaded Rod
55,276 Studs & Threaded Rod, showing 200, (click on any line for more information)
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| RePneu To | MI | Arc Weld Stud | Plain / Furnace Black | 5/8-11 x 2 | 5/8-11 x 2 ft arc stud ms | 1410 |
| |
| OneMonroe | Threaded Rod | Grade B7 | Plain / Furnace Black | 9/16-18 x 36 | 9/16-18 x 36 astm a193 b7 all thread rod | 6 |
| |
| OneMonroe | Threaded Rod | Grade B7 | Plain / Furnace Black | 7/8-14 x 36 | 7/8-14 x 36 astm a193 b7 all thread rod | 6 |
| |
| OneMonroe | Deformed Bar Anchor Stud, Rebar | Plain / Furnace Black | #6 | 6 mini srd twin-leg fbh carab + st rebars | 1 |
| ||
| Jackson | Fully Threaded Stud (All Thread) | Grade 55 | Galvanized | 3/4 x 24 | 3/4 x 24 stud all thread rod h.d.g. grade 55 painted yellow on end | 6 |
| |
| Jackson | Fully Threaded Stud (All Thread) | Grade A36 | Galvanized | 3/4-10 x 6 | 3/4-10 x 6 nc all thread stud f1554-grade a36 hdg | 2 |
| |
| OneMonroe | NC | Fully Threaded Stud (All Thread) | Steel | Zinc/Clear | 5/16-18 x 2.5 | 5/16-18 x 2.5 zinc stud | 10 |
|
| RePneu To | MI | Threaded Rod | Grade A | Galvanized | 5/8-11 x 3 | 5/8-11x3 a307 grade a all thread rods hdg | 1 |
|
| RePneu To | MI | Fully Threaded Stud (All Thread) | Grade B7 | Zinc/Clear | 5/8-11 x 3 1/2 | 5/8-11x3 1/2 b7 stud zinc (end to end) | 90 |
|
| RePneu To | MI | Fully Threaded Stud (All Thread) | Grade 8 | Plain / Furnace Black | 1/4-20 x 3/4 | 1/4-20 x 3/4 grade 8 threaded stud | 1677 |
|
| RePneu To | MI | CD & Arc Stud Welding Accessories | Plain / Furnace Black | 1/2 x 2 1/8 | 1/2 x2 1/8 headed weld stud (ferrule opt.) | 700 |
| |
| RePneu To | MI | CD & Arc Stud Welding Accessories | Plain / Furnace Black | 1/2 | 1/2 heavy duty standard ferrule headed weld stud ferrule | 2500 |
| |
| OneMonroe | NC | Ball Stud, Ball Pin | Steel | Zinc/Clear | ball stud fastener steel zinc 136538002 | 3115 |
| |
| OneMonroe | NC | Ball Stud, Ball Pin | Steel | Plain / Furnace Black | ball stud receiver | 1780 |
| |
| RePneu To | MI | Tie Rod (Brace Rod, Double End Rod) | Plain / Furnace Black | M12 | tie rod m12 | 1 |
| |
| OneMonroe | NC | Collar Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | 1 | cd collar stud-1/4-20 x 1/2 thread length 1 base length stainless steel | 100 |
|
| OneMonroe | NC | CD Weld Stud | Steel | Plain / Furnace Black | M3 x 15 | m3 x 15mm non-flange cd stud steel | 2000 |
|
| OneMonroe | NC | CD Weld Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #4-40 x 1/4 | 4-40 x 1/4 cd stud-non-flanged stainless stl | 60 |
|
| OneMonroe | NC | CD Weld Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #6-32 x 9/32 | 6-32 x 9/32 cd stud-flanged stainless steel | 985 |
|
| OneMonroe | NC | Self-Clinching Stud | Steel | Plain / Furnace Black | #2-56 x 1/2 | fh-256-8zi stud steel flush head #2-56 x .500 | 100 |
|
| OneMonroe | NC | Self-Clinching Stud | Steel | Plain / Furnace Black | 1/4-20 x 3/4 | stud steel flush head 1/4-20 x .750 dp | 540 |
|
| OneMonroe | NC | Self-Clinching Stud | Steel | Plain / Furnace Black | #4-40 x 1/2 | fha-440-8 stud al flush head #4-40 x .500 | 10340 |
|
| OneMonroe | NC | Self-Clinching Stud | Steel | Plain / Furnace Black | #6-32 x 3/4 | fha-632-12 stud al flush head #6-32 x .750 | 200 |
|
| OneMonroe | NC | Fully Threaded Stud (All Thread) | Steel | Plain / Furnace Black | #2-56 x 5/8 | fhl-256-10zi close edge stud steel #2-56 x .625 | 1984 |
|
| OneMonroe | NC | Fully Threaded Stud (All Thread) | Steel | Plain / Furnace Black | #6-32 x 5/16 | fhl-632-5zi close edge stud steel #6-32 x .3125 | 4535 |
|
| OneMonroe | NC | Fully Threaded Stud (All Thread) | Steel | Plain / Furnace Black | #6-32 x 1/2 | fhl-632-8zi close edge stud steel #6-32 x .500 | 1325 |
|
| OneMonroe | NC | Self-Clinching Stud | Steel | Plain / Furnace Black | M2.5 x 10 | fh-m2.5-10zi stud steel flush head metric m2.5 x 10mm | 97 |
|
| OneMonroe | NC | Self-Clinching Stud | Steel | Plain / Furnace Black | M4 x 22 | fh-m4-22zi stud steel flush head metric m4 x 22mm | 100 |
|
| OneMonroe | NC | Self-Clinching Stud | Steel | Plain / Furnace Black | M3 x 20 | fh-m3-20zi stud steel flush head metric m3 x 20mm | 3641 |
|
| OneMonroe | NC | Self-Clinching Stud | Steel | Plain / Furnace Black | M3 x 25 | fh-m3-25zi stud steel flush head metric m3 x 25mm | 400 |
|
| OneMonroe | NC | Fully Threaded Stud (All Thread) | Plain / Furnace Black | M5 x 15 | fh4-m5-15 stud 400ss metric m5 x 15mm | 148 |
| |
| OneMonroe | NC | Fully Threaded Stud (All Thread) | Plain / Furnace Black | M3 x 8 | fh4-m3-8 stud 400ss metric m3 x 8mm | 460 |
| |
| RePneu To | MI | Threaded Rod | Grade B7 | Plain / Furnace Black | 3/4-10 x 12 | 3/4-10x12 a193 b7 all thread rods plain | 6 |
|
| RePneu To | MI | Threaded Rod | Grade B7 | Plain / Furnace Black | 1 1/4-7 x 12 | 1 1/4-7x12 a193 b7 all thread rods plain | 3 |
|
| OneMonroe | NC | Double End Stud | Plain / Furnace Black | M20-2.50-2.50 x 45 | m20 x 2.5 x 45 stud din 939 | 15 |
| |
| OneMonroe | NC | Self-Clinching Stud | Steel | Zinc/Clear | #4-40 x 7/8 | self clinching stud press-in 4-40 x 7/8 steel zinc | 138 |
|
| OneMonroe | NC | Self-Clinching Stud | Steel | Plain / Furnace Black | #4-40 x 1/2 | stud steel flush head #4-40 x .500 | 3880 |
|
| OneMonroe | NC | Self-Clinching Stud | Steel | Plain / Furnace Black | #6-32 x 3/4 | stud steel flush head #6-32 x .750 | 4300 |
|
| OneMonroe | NC | Self-Clinching Stud | Steel | Plain / Furnace Black | #8-32 | fh-832-10zi stud steel flush head #8-32 | 1000 |
|
| OneMonroe | NC | Self-Clinching Stud | Steel | Plain / Furnace Black | #8-32 x 5/16 | stud steel flush head #8-32 x .3125 | 300 |
|
| OneMonroe | NC | Self-Clinching Stud | Steel | Zinc/Clear | M4 x 0.7 x 20 | fh-m4-20zi stud flush head steel finish zinc m4x0.7 x 20 | 4750 |
|
| OneMonroe | NC | Self-Clinching Stud | Steel | Plain / Furnace Black | M5 x 18 | stud steel flush head metric m5 x 18mm | 472 |
|
| OneMonroe | NC | Fully Threaded Stud (All Thread) | Steel | Zinc/Clear | #10-32 x 1 | 10-32 x 1 press fit stud zp | 400 |
|
| OneMonroe | NC | Self-Clinching Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #4-40 x 3/4 | stud ss flush head #4-40 x .750 | 1161 |
|
| OneMonroe | NC | Self-Clinching Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #4-40 x 3/8 | stud ss flush head #4-40 x .375 | 500 |
|
| OneMonroe | NC | Self-Clinching Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #6-32 x 16 | fhs-632-16 stud ss flush head 6-32 x 16 | 2000 |
|
| OneMonroe | NC | Self-Clinching Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | #8 x 32 | fhs-832-24 stud ss flush head #8-32 x 1.5 | 970 |
|
| OneMonroe | NC | Self-Clinching Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M2.5 x 15 | fhs-m2.5-15 stud ss flush head metric m2.5 x 15 | 1000 |
|
| OneMonroe | NC | Fully Threaded Stud (All Thread) | Steel | Zinc/Clear | #10-32 x 3/4 | 10-32 x 3/4 press fit stud zp | 400 |
|
| OneMonroe | NC | Deformed Bar Anchor Stud, Rebar | Steel | Plain / Furnace Black | #6 | 6 mini srd twin-leg fbh carab + st rebars | 1 |
|
| OneMonroe | NC | Deformed Bar Anchor Stud, Rebar | Steel | Plain / Furnace Black | #6 | 6 mini srd twin-leg fbh carab + st rebars | 2 |
|
| OneMonroe | NC | Deformed Bar Anchor Stud, Rebar | Steel | Plain / Furnace Black | 4 | 4 to 6 expanding y-leg snap hook and 2 rebar hooks 100% tie-off | 1 |
|
| OneMonroe | NC | Ball Stud, Ball Pin | Steel | Plain / Furnace Black | 1/4-20 x 3/8 | ball w/1/4-20 x 3/8 stud | 375 |
|
| OneMonroe | NC | Fully Threaded Stud (All Thread) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | hfhs-032-28 stud ss heavy head #10-32 x 1.75 | 192 |
| |
| Century | FL | Self-Clinching Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M5-0.80 x 15 | chsm5-15 m5 x 0.8 x 15 self clinching threaded stud stainless steel captive chsm5-15 | 1800 |
|
| OneMonroe | MN | Wheel Stud (Screw-in & Press-in) | Steel | Zinc/Clear | #3 x 1 1/4 | caster swivel hollow kingpin bolt hole sz 1/2 wheel sz 3 x 1-1/4 wheel mat blue polyurethane bearing ball load ht 4-1/8 load cap 250 lbs temp rt-40 to 180 f | 8 |
|
| Endries | WI | Self-Clinching Stud | Steel | Zinc/Clear | #8-32 x 1 | ch832-16 8-32x1 self clinching stud trivalent clear zinc (captive) | 1080 |
|
| Endries | WI | Fully Threaded Stud (All Thread) | Steel | Zinc/Clear | 1/4-20 x 1 1/4 | 1/4-20x1-1/4 full thread stud zinc | 111 |
|
| Endries | WI | Self-Clinching Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M4 x 12 | fhp-m4-12 m4x12 precipitation hard grade stainless flush stud (pem) | 9930 |
|
| Endries | WI | Self-Clinching Stud | 316, 317, A4 Stainless | Plain / Furnace Black | q2162 1/4-20x1/2 316 stainless steel flush head clinching stud | 6330 |
| |
| Endries | WI | Fully Threaded Stud (All Thread) | Steel | Phosphate | .156 | dcs-1029-po .156 steel stud receiver black phosphate | 13500 |
|
| Endries | WI | Threaded Rod | Steel | Zinc/Clear | 1/2-13 x 3 | 1/2-13x3ft thread rod trivalent clear zinc (sold per rod) | 50 |
|
| Endries | WI | Arc Weld Stud | Steel | Plain / Furnace Black | 1/2-13 x 1 1/8 | 1/2-13x1-1/8 mild steel partial thread arc weld stud | 60 |
|
| Endries | WI | Resistance/Projection Weld Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M10 x 35 | hwz10035 m10x35 stainless steel weld screw | 1950 |
|
| Endries | WI | Resistance/Projection Weld Stud | Plain / Furnace Black | hw2716 5/16-18x1 weld screw (ohio only) | 200 |
| ||
| Endries | WI | Fully Threaded Stud (All Thread) | Grade 5 | Zinc/Clear | 5/8-11 x 6 | 5/8-11x6 overall length grade 5 full thread stud trivalent clear zinc | 45 |
|
| Endries | WI | Fully Threaded Stud (All Thread) | Steel | Zinc/Clear | 1/2-13 x 20 3/4 | 1/2-13x20-3/4 overall length full thread stud trivalent clear zinc | 50 |
|
| Endries | WI | CD Weld Stud | Copper Plated | #8-32 x 3/8 | 408310 5 8-32x3/8 cd flange weld stud copper flash (keystone fastening only) | 53176 |
| |
| Endries | WI | Arc Weld Stud | Steel | Plain / Furnace Black | 5/16-18 x 5/8 | 5/16-18x5/8 mild steel full thread arc weld stud plain source controlled | 1000 |
|
| Endries | WI | Self-Clinching Stud | Steel | Zinc/Clear | 5/16-18 x 1 | hch518-16 5/16-18x1 steel high torque self-clinching stud trivalent clear zinc (captive fasteners only) | 3300 |
|
| RePneu To | MI | Fully Threaded Stud (All Thread) | Grade 8 | Plain / Furnace Black | 1/4-20 x 3/4 | 1/4-20 x 3/4 fully threaded stud plain finish-length tolerance +/-.02 (.73-.77 ) cut and chamfered flat ends material and threads in conformance with sae j429 grade 8 min tensile strength 150ksi threads asme b1.1 1/4-20 (unc 2a) 100% laser sorted | 1932 |
|
| OneMonroe | NC | Threaded Rod | Steel | Plain / Furnace Black | 1/4-20 x 1 1/2 | 1/4-20 x 1 1/2 steel vertical 3/8 rod | 50 |
|
| OneMonroe | NC | Wheel Stud (Screw-in & Press-in) | Aluminum | Zinc/Yellow | 4 1/8 x 4 1/2 | caster swivel plate wheel sz 5 x 2 wheel mat blue urethane on aluminum finish yellow dichromate bearing sealed roller top plt sz 5 x 5-1/2 bolt hole ptrn 4-1/8 x 4-1/2 load ht 6-1/2 load cap 1500 lbs temp rt-40 to 180 f | 1 |
|
| OneMonroe | NC | Wheel Stud (Screw-in & Press-in) | Aluminum | Zinc/Yellow | 4 1/8 x 4 1/2 | caster swivel plate wheel sz 6 x 2 wheel mat blue urethane on aluminum finish yellow dichromate bearing sealed roller top plt sz 5 x 5-1/2 bolt hole ptrn 4-1/8 x 4-1/2 load ht 7-3/8 load cap 1500 lbs temp rt-40 to 180 f | 1 |
|
| OneMonroe | NC | Wheel Stud (Screw-in & Press-in) | Rubber, Buna-N, Neoprene etc. | Plain / Furnace Black | 3 3/4 x 4 5/8 | caster swivel plate wheel sz 4 x 1-5/8 wheel mat black hard rubber finish yellow dichromate bearing roller top plt sz 3-3/4 x 4-5/8 bolt hole ptrn 2-5/8 x 3-5/8 slotted to 3 x 3 load ht 5-9/32 load cap 300 lbs temp rt-40 to +180 f | 8 |
|
| OneMonroe | NC | Wheel Stud (Screw-in & Press-in) | Steel | Zinc/Clear | 2 3/4 x 3 3/4 | rigid caster rig only accepts wheel sz 5 x 1-3/8 top plate sz 2-3/4 x 3-3/4 bolthole pattern 1-3/4 x 2-5/8 to 3 . | 18 |
|
| OneMonroe | NC | Wheel Stud (Screw-in & Press-in) | Steel | Zinc/Clear | 2 3/4 x 3 3/4 | rigid plate caster rig only accepts wheel sz 5 x 1-3/8 top plate sz 2-3/4 x 3-3/4 bolthole pattern 1-3/4 x 2-5/8 to 3 . | 22 |
|
| OneMonroe | NC | Fully Threaded Stud (All Thread) | Steel | Plain / Furnace Black | 1/4-28 | 5/8 od cyl cam follower sealed w/hex hole 1/4-28 stud diameter | 4 |
|
| OneMonroe | NC | Wheel Stud (Screw-in & Press-in) | Steel | Zinc/Clear | 3 3/8 x 5 1/4 | caster rigid top plate wheel sz 12 x 3 wheel mat polyurethane on iron bearing top plt sz 5 x 7-1/4 bolt hole ptrn 3-3/8 x 5-1/4 slotted to 4-1/8 x 6-1/8 load ht 15-1/2 load cap 3420 lbs | 1 |
|
| OneMonroe | MN | Wheel Stud (Screw-in & Press-in) | Rubber, Buna-N, Neoprene etc. | Plain / Furnace Black | 3 1/2 x 1 1/4 | caster rigid top plate wheel sz 3-1/2 x 1-1/4 wheel mat black hard rubber bearing plain bore top plt sz 2-5/8 x 3-3/4 bolt hole ptrn 1-3/4 x 2-3/4 slotted to 3 load ht 4-3/4 load cap 250 lbs temp rt-40 to +160 f | 1 |
|
| OneMonroe | NC | Wheel Stud (Screw-in & Press-in) | Steel | Zinc/Clear | 2 3/4 x 3 3/4 | swivel caster rig only accepts wheel sz 4 x 1-3/8 top plate sz 2-3/4 x 3-3/4 bolthole pattern 1-3/4 x 2-5/8 to 3 . | 1 |
|
| OneMonroe | NC | Fully Threaded Stud (All Thread) | Steel | Zinc/Clear | 1/2 x 13 x 6 | machine leveler 3 dia. glass nylon base steel stud with clear zinc plating 1/2x13x6 theaded stem | 1 |
|
| OneMonroe | NC | Wheel Stud (Screw-in & Press-in) | Steel | Plain / Furnace Black | M200 | caster flanged wheel rigid-plate wheel size 150mm x 36mm wheel material cast iron bearing ball load height 200mm top plate size 140mm x 110mm bolthole pattern 105mm x 75mm-80mm load capacity 1000lbs temp rating-40f to +800f. | 4 |
|
| OneMonroe | NC | Fully Threaded Stud (All Thread) | Steel | Plain / Furnace Black | 1-8 x 3 1/2 | leveler 1-8 x 3-1/2 stud 4 base | 13 |
|
| OneMonroe | NC | Self-Clinching Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M4 x 10 | stud concealed head ss met m4 x 10mm | 83 |
|
| OneMonroe | NC | Self-Clinching Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain / Furnace Black | M4 x 6 | stud concealed head ss met m4 x 6mm | 400 |
|
| OneMonroe | NC | Self-Clinching Stud | Steel | Plain / Furnace Black | #8-32 x 5/8 | fha-832-10 stud al flush head #8-32 x .625 | 244 |
|
| OneMonroe | NC | Wheel Stud (Screw-in & Press-in) | Rubber, Buna-N, Neoprene etc. | Plain / Furnace Black | 2-11/16 x 3 5/8 | caster rigid top plate wheel sz 4 x 1-1/4 wheel mat grey rubber on polyolefin flat tread bearing ball load ht 4-11/16 top plate sz 2-11/16 x 3-5/8 bolt hole ptrn 1-3/4 x 2-13/16 slotted to 3-1/16 load cap 240lbs. | 54 |
|
| OneMonroe | NC | Wheel Stud (Screw-in & Press-in) | Steel | Zinc/Clear | 2 5/8 x 3 5/8 | caster rigid plate wheel sz 8 x 2 wheel mat polykat thermo-urethane bearing precision ball top plt sz 4 x 4-1/2 bolt hole ptrn 2-5/8 x 3-5/8 slotted to 3 x 3 load ht 9-1/2 load cap 1200 lbs | 4 |
|
| OneMonroe | NC | Self-Clinching Stud | Steel | Plain / Furnace Black | #10-32 x 7/8 | stud steel flush head #10-32 x .875 | 1600 |
|
| OneMonroe | NC | Self-Clinching Stud | Steel | Plain / Furnace Black | #2-56 x 5/16 | stud steel flush head #2-56 x .3125 | 380 |
|
| Future Fastener | TX | Threaded Rod | 316, 317, A4 Stainless | Plain / Furnace Black | 1/4-20 x 3 | 1/4-20 x 3ft all thread rod (316ss) | 12 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
