FCH Member Advertisement
FCH News
2, Industrial Hardware
> 200 matches, 2, Industrial Hardware. Showing 200, (click on any line for more information)
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| METRO IND | OH | Springs (Compression) | 2.844 x .080 | compression spring 2.844 x .080 wire | 1 |
| ||
| OneMonroe | NC | Latches & Catches | 2 3/4 x 1/2 | latch door 2-3/4 x1/2 | 2 |
| ||
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | Rubber, Buna-N, Neoprene etc. | Plain | 2 x 13/16 | caster hooded swivel threaded stem sz 3/8-16 x 3/4 wheel sz 2 x 13/16 wheel mat soft rubber bearing plain bore load ht 2-5/8 load cap 80 lbs temp rt-40 to +180 f | 27 |
|
| OneMonroe | NC | Protective Caps & Plugs | Plastic | Plain | 2 1/2 x 13/16 | wheel sz 2-1/2 x 13/16 mat thermoplastic urethane bearing plain bore bore id 1/4 hub length .90 load cap 120 lb gray/black | 10 |
|
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | Rubber, Buna-N, Neoprene etc. | Plain | 2 x 13/16 | 2 x 13/16 swivel caster rubber round stem stem size 7/16 x 1-29/32 round straight stem. | 32 |
|
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | Plastic | 2 x 7/8 | caster swivel-square stem stem size 2 x 7/8 1 mounting hole 17/64 d wheel size 5 x 7/8 wheel mat polyolefin bearing delrin w/side lock brake load ht 5-3/4 load cap 145 lbs temp rt-45 to +180 f | 16 |
| |
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | Plain | 2 x 15/16 | caster threaded-stem stem size 14-20 x 1-1/2 wheel size 2 x 15/16 bearing plain load capacity 80lbs. | 16 |
| |
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | 2 1/2 x 1 1/4 | caster swivel-plate wheel size 2-1/2 x 1-1/4 wheel material elastomer bearing sleeve load height 3-3/4 top plate size 2-1/2 x 3-5/8 bolt hole pattern 1-3/4 x 2-7/8 slotted to 3 load capacity 300 lbs temp rating-45 to +180 f | 3 |
| ||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | 2 1/2 x 1 1/4 | caster swivel-plate wheel size 2-1/2 x 1-1/4 wheel material elastomer bearing sleeve load height 3-3/4 top plate size 2-1/2 x 3-5/8 bolt hole pattern 1-3/4 x 2-7/8 slotted to 3 load capacity 300 lbs temp rating-45 to +180 f | 36 |
| ||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | 2 1/2 x 1 1/4 | swivel caster with 2-1/2 x 1-1/4 cast iron wheel acetal bearing 400 lbs capacity & 5/8 x 11 x 2 threaded stem | 3 |
| ||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | 2 1/2 x 1 1/4 | swivel caster with 2-1/2 x 1-1/4 cast iron wheel acetal bearing 400 lbs capacity & 3/4-10 x 2 threaded stem | 1 |
| ||
| OneMonroe | NC | Protective Caps & Plugs | Steel | Black Oxide | 2 1/2 x 1 3/8 | wheel wheel size 2-1/2 x1-3/8 wheel material red polyurethane on black core ball bearing bearing bore 1/2 hub length 1-9/16 load capacity 300 temp rating-30f to +180f comes with 1/2 od x 3/8 id x 1-5/8 l steel spanner bushing. | 3 |
|
| OneMonroe | NC | Staples | 2 1/4 x 1 7/8 | staple only 2-1/4 x 1-7/8 | 11 |
| ||
| OneMonroe | NC | Handles | 28 3/4 x 19 5/16 | pltfrm trkfolding handleeplstc330# 28-3/4x19-5/16in 4in poly cstrs | 1 |
| ||
| METRO IND | OH | Strut Systems (Channels, Clamps, Hangers, etc.) | 2 x 2 | 2 x 2 no-twist corner angle (2 indents) for strut | 41 |
| ||
| OneMonroe | NC | Hinges | 2 1/2 x 2 | 2-1/2 x 2 cabinet hinge | 7 |
| ||
| OneMonroe | NC | Hinges | Aluminum | 2 x 2 | 2 x 2 aluminum butt hinge | 91 |
| |
| OneMonroe | NC | Hinges | 2 x 2.312 | li ft off hinge 2 x 2.312 | 50 |
| ||
| OneMonroe | MN | Hinges | 2 x 2 1/2 | 2 x 2-1/2 loose joint hinge | 69 |
| ||
| OneMonroe | MN | Hinges | 2 x 2 1/2 | 2 x 2-1/2 loose joint hinge | 22 |
| ||
| OneMonroe | NC | Hinges | 2 1/2 x 2 1/2 | 2-1/2 x 2-1/2 cabinet hinge | 8 |
| ||
| OneMonroe | NC | Hinges | Aluminum | 2 1/2 x 2 1/2 | 2-1/2 x 2-1/2 aluminum butt hinge | 23 |
| |
| OneMonroe | NC | Hinges | Steel | 2 x 2 1/2 | steel butt hinge 2 x 2-1/2 .075 .187 pin | 25 |
| |
| OneMonroe | NC | Hinges | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 2 1/2 x 2 1/2 | 2-1/2 x 2-1/2 304 stainless steel hinge | 74 |
| |
| OneMonroe | NC | Hinges | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 2 1/2 x 2 1/2 | 2-1/2 x 2-1/2 butt hinge stainless steel | 109 |
| |
| OneMonroe | NC | Hinges | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 2.5 x 2.5 | hinge 2.5 x2.5 ss 2mm thick | 100 |
| |
| OneMonroe | MN | Hinges | 2 x 3 | 2 x 3 loose joint hinge | 11 |
| ||
| OneMonroe | MN | Hinges | 2 x 3 | 2 x 3 loose joint hinge | 141 |
| ||
| OneMonroe | MN | Hinges | 2 x 3 | 2 x 3 loose joint hinge | 118 |
| ||
| OneMonroe | MN | Hinges | 2 x 3 | 2 x 3 loose joint hinge | 193 |
| ||
| OneMonroe | MN | Hinges | 2 x 3 | 2 x 3 loose joint hinge | 45 |
| ||
| OneMonroe | NC | Protective Caps & Plugs | Steel | Zinc/Clear | 2 5/8 x 3 | rig swivel-plate w/raceway seal accepts wheel size 4 rig mat steel finish zinc load ht 3-3/8 top plate size 4 x 4-1/2 bolt hole pattern 2-5/8 x 3 slotted to 3 x 3-5/8 load cap 1 000 lbs | 6 |
|
| OneMonroe | NC | Hinges | 2.598 x 3.071 | .104 2.598x3.071 half hinge | 2 |
| ||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | Resin (Phenolic, etc.) | Plain | 2 3/8 x 3 5/8 | caster swivel plate wheel size 3 x 1-1/2 wheel material phenolic sleeve bearing top plate size 2-3/8 x 3-5/8 bolthole pattern 1-3/4 x 2-7/8 slotted to 3 load height 4-1/8 load capacity 350lbs temp rating-50f to +250f. | 4 |
|
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 2 1/2 x 3 5/8 | caster swivel plate stainless steel wheel size 4x1-1/4 wheel material brimstone load height 5-1/8 top plate size 2-1/2 x3-5/8 bolt hole pattern 1-3/4 x2-13/16 to 3-1/16 load capacity 300 lbs temp rating-45f to +480f intermittent +425f cont | 3 |
| |
| Ababa | CA | Handles | 25 x 5 | 25s m5-.8 drop in t-nut w/flex. handle (bright) | 150 |
| ||
| Ababa | CA | Hook & Loop Products (Velcro, Teccro, etc.) | 2 x 50 | 2 x 50 ft super adhsive hook & loop combo pack | 1 |
| ||
| OneMonroe | NC | Hinges | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 2.0 x 6 | hinge window ksbd 747 series ss 2.0x6 butt hinge w/holes both leaves chamfered ends | 27 |
| |
| OneMonroe | NC | Hinges | Aluminum | 2.00 x 72 | 901 aluminum hinge 2.00 x 72 .250 dia pin staked 1.00 knuckle mill finish | 20 |
| |
| OneMonroe | NC | Handles | Aluminum | 20 x 9 | hand truck aluminum disc brake cable frame curve lattice back handle double grip load height 52 wheels 10 pneumatic with sealed precision bearings nose plate 20 x9 extruded aluminum load capacity 600 lbs | 1 |
| |
| OneMonroe | MN | Hinges | 2 x 96 | 901 crs 2 x 96 hinge | 15 |
| ||
| OneMonroe | NC | Hinges | 2.5 x 96 | 1125 crs 2.5 x 96 hinge | 7 |
| ||
| OneMonroe | NC | Hinges | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 2.5 x 96 | 1260 ss 2.5 x 96 hinge | 20 |
| |
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | 2 x 10 | 2 x 10 logo channel decal the caster guy for straight back frames. | 50 |
| ||
| OneMonroe | NC | Brackets & Supports | 20 x 13 | 20 x 13 heavy duty shelf bracket-white | 2 |
| ||
| Jackson | MS | Grease Fittings | 20 | oz. aerosol heavy duty degreaser chemical products #03180 | 11 |
| ||
| Jackson | MS | Nails | 20 | penny nail common brite sold per 5 pound box ps#c5 | 14 |
| ||
| Jackson | MS | Strut Systems (Channels, Clamps, Hangers, etc.) | Steel | Zinc/Clear | 2 | 2 rigid unistrut pipe clamp unistrut p1100 series or equal | 46 |
|
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | 2 1/2 | leveler2-1/2 in base diam5/8-11x2 1200 | 2 |
| ||
| OneMonroe | MN | Latches & Catches | 316, 317, A4 Stainless | 2.48-3.00 | compression latch medium size no restriction 2-12mm (.075-. 475 in) door thickness 21-28mm or 63-76mm (.83-1.10 in or 2.48-3.00 in) grip 316 stainless steel electropolished | 6 |
| |
| OneMonroe | MN | Grommets & Eyelets | 2 | grommet edging spring-fast size 2 25 ft/reel | 3 |
| ||
| OneMonroe | MN | Hinges | Black Oxide | 2 1/2 | 2-1/2 lift off black hinge | 16 |
| |
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | 21 | max p rllrfree-spinning1/2in round shaft 21in bf 10 tcp rotacasters 9 ea-1in spacers | 1 |
| ||
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | 21 | max p rllrfree-spinning1/2in round shaft 21in bf 5 tcp rotacasters 4 ea-3in spacers | 6 |
| ||
| OneMonroe | MN | Hinges | 2 1/2 | 2-1/2 non removable pin hinge | 98 |
| ||
| OneMonroe | MN | Hinges | 2 | 2 hinge-left hand | 12 |
| ||
| OneMonroe | MN | Brackets & Supports | 2 | side mount pike pole bracket set = 2 pc | 2 |
| ||
| SII | IN | Hinges | 2 | blum hinge 110+ s/c full o/l inserta ni 250/bx | 50 |
| ||
| OneMonroe | TX | Protective Caps & Plugs | Plastic | 2.125 | plug protective cap 2.125 | 622 |
| |
| B & K FAST | PA | Strut Systems (Channels, Clamps, Hangers, etc.) | Steel | Zinc/Clear | 2 | 2 unistrut clamp zinc | 2 |
|
| METRO IND | OH | Gaskets | #2 | 11 oz permatex #2 form-a-gasket | 6 |
| ||
| METRO IND | OH | Springs (Extension) | 2.656 | extension spring 2.656 length .080 wire size | 1 |
| ||
| METRO IND | OH | Springs (Compression) | 2.193 | compression spring 2.193 length .040 wire size | 1 |
| ||
| METRO IND | OH | Springs (Compression) | 2.625 | compression spring 2.625 length .048 wire size | 1 |
| ||
| METRO IND | OH | Springs (Compression) | 2.500 | compression spring 2.500 length .063 wire size | 1 |
| ||
| METRO IND | OH | Handles | 2 | 2 oil & chip brush wood handle | 38 |
| ||
| METRO IND | OH | Hinges | Steel | Zinc/Clear | 2 | 2 hinge non-removable pin steel zinc | 26 |
|
| METRO IND | OH | Hinges | #2 | #2 sectional garage door hinge stanley | 5 |
| ||
| OneMonroe | MA | Grommets & Eyelets | 2 | grommet edging spring-fast size 2 25 ft/reel | 1 |
| ||
| Ababa | CA | Handles | Plastic | Plain | 20 | 20 plastic wrap (20 x 1000 ) w/handle 80 ga | 19 |
|
| Ababa | CA | Handles | Plastic | Plain | 2 0 | 20 plastic wrap (20 x 1000 ) w/handle 80 ga | 4 |
|
| Ababa | CA | Latches & Catches | 20 | 20 comp. drawer-18l x 12d x 3h w/catch | 8 |
| ||
| Ababa | CA | Latches & Catches | 20 | 20 comp. drawer-18l x 12d x 3h w/catch | 2 |
| ||
| Ababa | CA | Latches & Catches | 21 | 21 comp. drawer-18l x 12d x 3h w/catch | 5 |
| ||
| Ababa | CA | Latches & Catches | 21 | 21 comp. drawer-18l x 12d x 3h w/catch | 2 |
| ||
| Ababa | CA | Latches & Catches | 24 | 24 comp. drawer-18l x 12d x 3h w/catch | 1 |
| ||
| Ababa | CA | Latches & Catches | 24 | 24 comp. drawer-18l x 12d x 3h w/catch | 2 |
| ||
| Ababa | CA | Latches & Catches | Grade 2H | 20 | 20 comp. drawer-13 5/16l x 9 1/4d x 2h w/catch | 4 |
| |
| Ababa | CA | Latches & Catches | Grade 2H | 20 | 20 comp. drawer-13 5/16l x 9 1/4d x 2h w/catch | 2 |
| |
| Ababa | CA | Latches & Catches | Grade 2H | 21 | 21 comp. drawer-13 5/16l x 9 1/4d x 2h w/catch | 9 |
| |
| Ababa | CA | Latches & Catches | Grade 2H | 21 | 21 comp. drawer-13 5/16l x 9 1/4d x 2h w/catch | 2 |
| |
| Ababa | CA | Latches & Catches | Grade 2H | 24 | 24 comp. drawer-13 5/16l x 9 1/4d x 2h w/catch | 4 |
| |
| Ababa | CA | Latches & Catches | Grade 2H | 24 | 24 comp. drawer-13 5/16l x 9 1/4d x 2h w/catch | 2 |
| |
| Ababa | CA | Protective Caps & Plugs | Plastic | 2 | 2 snap bushing black | 550 |
| |
| Ababa | CA | Nails | Plastic | Plain | 21 | 21o plastic clip .131 x 3 ctd smooth nail stl pln | 1000 |
|
| Ababa | CA | Latches & Catches | 2 | grabber catch spring loaded (13n/2.92 lbs) 2 pcs | 41 |
| ||
| Jackson | MS | Strut Systems (Channels, Clamps, Hangers, etc.) | Galvanized | 2 rigid unistrut pipe clamp pre-galvanized | 24 |
| ||
| RePneu To | MI | Handles | 2 | lower handle xt2 | 1 |
| ||
| RePneu To | MI | Handles | 2 | handle assembly xt2 | 1 |
| ||
| OneMonroe | NC | Handles | 2 | 2 point paddle handle | 3 |
| ||
| OneMonroe | NC | Storage Bins | 2 | cam lock storage bin sim assembly 2 keys | 130 |
| ||
| OneMonroe | NC | Latches & Catches | 24 | magnetic latch snap-in-round hole 24 n (5.5 lbs.) rated load small size black | 75 |
| ||
| OneMonroe | NC | Nails | Galvanized | 2 | 2 18ga galvanized plain brad nail 5m/box | 2 |
| |
| OneMonroe | NC | Gas Springs, Gas Struts (Lift-O-Mat etc.) | Steel | 250 | gas spring-250 pound force steel ball joint | 1 |
| |
| OneMonroe | NC | Handles | 2 | center control 2 pc red inside handle | 1 |
| ||
| OneMonroe | NC | Latches & Catches | 2 1/2 | 2-1/2 barrel bolt 22-4815 | 3 |
| ||
| OneMonroe | NC | Latches & Catches | 2 | right hand single rotary latch 2 pc part | 4 |
| ||
| OneMonroe | NC | Latches & Catches | 2 | le ft hand single rotary latch 2 pc part | 2 |
| ||
| OneMonroe | NC | Gas Springs, Gas Struts (Lift-O-Mat etc.) | 20 | gas spring-20 # | 7 |
| ||
| OneMonroe | NC | Gas Springs, Gas Struts (Lift-O-Mat etc.) | 220 | gas spring-220 # | 10 |
| ||
| OneMonroe | NC | Gas Springs, Gas Struts (Lift-O-Mat etc.) | 260 | gas spring-260 # | 1 |
| ||
| OneMonroe | NC | Handles | 2 3/4 | size 2-3/4 chest handle | 20 |
| ||
| OneMonroe | NC | Handles | 2 | 2 point paddle handle lock | 2 |
| ||
| OneMonroe | NC | Latches & Catches | 26 | 26 rod for 167 latch | 6 |
| ||
| OneMonroe | NC | Handles | Black Oxide | 2 | handle paddle 2 point locking w/holes black finish key 501 | 1 |
| |
| OneMonroe | NC | Protective Caps & Plugs | Plastic | Plain | 2 | plastic end cap 2 inch | 50 |
|
| OneMonroe | NC | Gaskets | 24-001 | gasket for 24-001 grille | 40 |
| ||
| OneMonroe | NC | Handles | 24 | 24 inch handle for platform trk | 10 |
| ||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | 2 | 2 swivel caster | 2 |
| ||
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
