FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| OneMonroe | NC | Handles | M3.3 | pull handle low profile 1.8 to 3.3 mm th | 7 |
| ||
| OneMonroe | NC | O-Rings & Quad Ring Seals (X-Rings) | Plain | o-ring metric | 7 |
| ||
| OneMonroe | NC | Shim Washer (Round, Slotted, Square etc.) | Steel | Zinc/Clear | 2 x 4 | 2 x 4 shim-zinc plated | 33 |
|
| OneMonroe | NC | Metal Drill Bits | Steel | #42 | #42 brute platinum hvy duty drill | 18 |
| |
| OneMonroe | NC | Metal Drill Bits | Steel | 27/64 | 27/64 jobber drill (3/8 shank) | 1 |
| |
| OneMonroe | NC | Handles | grab handle | 3 |
| |||
| OneMonroe | NC | Plate Washer (Square & Rect.) | Steel | Plain | plate belly pass thru trailor | 31 |
| |
| OneMonroe | NC | Wrenches | spring plunger wrench | 7 |
| |||
| OneMonroe | NC | Pipe Coupling, Pipe Connector | Steel | 3/8 | 3/8 industrial interchange x 1/2 female npt steel coupler | 50 |
| |
| OneMonroe | NC | Pipe Coupling, Pipe Connector | Steel | 3/8 | 3/8 industrial interchange x 3/8 male npt steel coupler | 7 |
| |
| OneMonroe | NC | Lifting Hooks, Rings & Snaps (Slip Hooks, Snap Shackles, etc.) | Steel | Plain | 7/16 | 7/16 self colored eye slip hook | 3 |
|
| OneMonroe | NC | Handles | grab handle with caps | 3 |
| |||
| OneMonroe | NC | Cushioned Pipe & Tube Loop Clamp | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 7/8 | 7/8 id condit clamp ss w/neo | 104 |
| |
| OneMonroe | NC | Locating Pins (Fixturing Pins, Alignment Pins) | Steel | Plain | receiver end pin align tool | 4 |
| |
| OneMonroe | NC | Swage Sleeves, Crimp Sleeves | Aluminum | Plain | 3/16 x 11/32 | 3/16 x 11/32 aluminum button sleeve | 80 |
|
| OneMonroe | NC | Hinges | Painted | 4 x 24 | 4 x 24 hinge ball bearing painted w series | 1 |
| |
| OneMonroe | NC | Wire Rope Clamps, U-Bolt Clamps | Steel | Plain | 1/4 | 1/4 drop forged wire rope clip | 8 |
|
| OneMonroe | NC | Cushioned Pipe & Tube Loop Clamp | 1/4 | 4 1/4 o.d. tubing clamp | 41 |
| ||
| OneMonroe | NC | cfm.60 sh-8-clean | 20 |
| ||||
| OneMonroe | NC | steel zinc .120/.250x2.25 x40 | 351 |
| ||||
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
