FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Century | FL | Carriage Bolt | Steel | Plain | mcmaster carr 92710a217 jack screw same as raf # 4750-3-28 | 20 |
| |
| Century | FL | Flat Head Socket Cap Screw | Class 10.9 | Plain | M6.0 | m 4.0 6.0mm grd 10.9 flat hd soc hd cap screws din 7991 | 500 |
|
| Century | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-24 x 5/8 | 10-24 x 5/8 slotted round hd m/s 18-8 s/s | 496 |
|
| Century | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 57 | seastrom 5710-32-2 s/s flat washer | 70 |
|
| Century | FL | Machine Screw | Plain | #8-36 x 3/8 | ms51958-43 | 30 |
| |
| Century | FL | Brackets & Supports | 39-1975 | 39-1975 inner bracket kia xm_______________ | 1020 |
| ||
| Century | FL | Flat Washer | Plastic | Plain | M4 | micor plastics #17w04720b m4 flat washer black nylon micro plastics 17w04720b | 5400 |
|
| Century | FL | Flat Washer | Steel | Zinc/Yellow | .4375 x .75 x .078 | .4375 id x .75 od x .078 thk fw steel zinc yellow .0003 thk min (a3l) | 250 |
|
| Century | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 7/8 | 10-32 x 7/8 slotted flat hd-ms 18-8 | 712 |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | Plain | #14 x 2 1/4 | #14 x 2-1/4 phillips pan head type-a | 6604 |
| |
| Centennia | CO | Lag Screw | Steel | Zinc/Clear | 3/4 x 4 1/2 | 3/4 x 4 1/2 hex lag screw zinc | 7 |
|
| Centennia | CO | Threaded Rod Anchor (HangerMate, etc.) | Plain | 1/4 x 2 | 1/4 x 2 vertical hanger for wood 3/8-16 rod (use red driver) | 660 |
| |
| Centennia | CO | Sleeve Anchor | Plain | 3/8 x 6 | 3/8 x 6 powers flat sleeve anchor | 10 |
| |
| Kanebridge | IL | Self-Tapping Self-Drilling Screw (Tek etc.) | Black Oxide | #12-14 x 2 | #12-14x2 6-lobe pancake sds full thread #3 point black ox & oil self-drilling screws | 10000 |
| |
| CIF | IL | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 7/8-9 x 5 | 7/8-9 x 5 full thread stud astm a193 b7 plain | 25 |
|
| CIF | IL | Split Lock Washer | Steel | Zinc/Clear | 1/2 | 1 1/2 split lock washer zinc plated | 136 |
|
| CIF | IL | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 1 1/4 | 3/8-16 x 1 1/4 flat head socket cap screw 18-8 stainless steel | 200 |
|
| CIF | IL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 x 3/8 | #4-40x 3/8 socket head cap screw 18-8 stainless steel | 20000 |
|
| Optimas | IL | Round Spacer | Steel | Plain | .472 x .750 x 1.594 | .472 x .750 x 1.594 round spacer seamless steel per drawing (p) | 26 |
|
| SWACO | OH | Machine Screw | Brass | Plain | #6-32 x 1/2 | #6-32x1/2 ph pan ms br pln | 1000 |
|
| SWACO | OH | External Thread Insert, Self-Tapping Insert | Steel | Plain | cal2-5013-200 threaded insert stl | 3755 |
| |
| SWACO | OH | Hex Head Cap Screw | Grade 8 | Plain | 1 1/8-12 x 7 | 1-1/8-12x7 hhcs gr8 pln | 14 |
|
| SWACO | OH | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 1 1/8-8 x 8 | 1-1/8-8x8 b7 stud pln | 8 |
|
| SWACO | OH | Press-In/Ultrasonic Insert for Plastic (E-Z Lok etc.) | Brass | Plain | 19 | ins19/m5/.375l ek brass insert | 510 |
|
| SWACO | OH | T-Head Bolt (T-Slot Bolt, Hammer Head Bolt) | Steel | Zinc/Clear | 5/16-18 x .74 | 5/16-18x.74 t-bolt zinc | 154 |
|
| SWACO | OH | Self-Tapping Self-Drilling Screw (Tek etc.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | #12-14 x 2 1/2 | #12-14 x 2 1/2 phillips flat self drilling screw 410 ss #3 pt | 189 |
|
| UNEEDA | NJ | Machine Screw | Steel | Plain | #10-24 x 3/4 | 10-24x3/4 phil truss m/s | 3104 |
|
| Field Fas | IL | Flat Washer | Steel | Zinc/Black | .2 x 1/2 | .2 x 1/2 flat washer 1/16 thk stl zc/blk | 19983 |
|
| OneMonroe | MN | Wheel Stud (Screw-in & Press-in) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Zinc/Clear | 2 3/8 x 3 5/8 | rig stainless steel rigid plate accepts wheel sz 3 x 1-1/4 top plate sz 2-3/8 x 3-5/8 bolthole pattern 1-3/4 x 3 . | 100 |
|
| OneMonroe | MN | Machine Screw | Steel | Zinc/Clear | 5/16-18 x 3 1/2 | 5/16-18 x 3-1/2 slotted flat head zinc plated machine screw | 43 |
|
| OneMonroe | MN | Socket Head Cap Screw | Class 8.8 | Zinc/Clear | M20-2.50 x 150 | m20 x 2.5 x 150 cl 8.8 skt hd c/s-zp | 5 |
|
| OneMonroe | MN | Brackets & Supports | pivot bracket only | 60 |
| |||
| OneMonroe | MN | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1-14 x 2 | 1-14 x 2 gr 5 hhc/s-zp nf | 5 |
|
| OneMonroe | MN | Key Locking Insert (Keensert, Keysert etc.) | Plain | insert for cam action door locks | 9 |
| ||
| OneMonroe | MN | Lock Nut, Nylon Insert | Grade 8 | Plain | 1/4-28 | 1/4-28 gr. 8 nylon insert l/n-yz | 2.2999999999999998 |
|
| OneMonroe | MN | Fully Threaded Stud (All Thread) | Grade B7 | Zinc/Clear | 1-8 x 6 | 1-8 x 6 stud zinc plated b7 | 10 |
|
| OneMonroe | MN | Sems Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 x 5/8 | 4-40 x 5/8 ph pan int sem screw 18-8ss | 5000 |
|
| OneMonroe | MN | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | Plain | 5/16-18 | 5/16-18 insert nut decorative cap | 5320 |
| |
| OneMonroe | MN | Flat Head Socket Cap Screw | ASTM A574 | Black Oxide | M8 x 18 | m8 x 18mm flat hd socket cap screw 10.9 alloy steel black oxide w/nd patch aa0796 | 4153 |
|
| OneMonroe | MN | Socket Head Cap Screw | Class 12.9 | Black Oxide | M5 x 25 | m5 x 25mm socket head cap screw class 12.9 black oxide din 912 | 400 |
|
| OneMonroe | MN | Turnbuckles | Galvanized | 1/4-20 x 4 | 1/4-20 x 4 turnbuckle eye & eye galv. | 21 |
| |
| OneMonroe | MN | Hex Head Cap Screw | Grade 5 | Plain | 3/4-16 x 1 1/2 | 3/4-16 x 1-1/2 plain finish sae j429 grade 5 hex cap screw | 50 |
|
| OneMonroe | MN | Machine Screw | Steel | Zinc/Clear | #12-24 x 1 1/4 | #12-24 x 1-1/4 slotted round head zinc plated machine screw | 100 |
|
| OneMonroe | MN | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 7/8-14 x 5 | 7/8-14 x 5 hex cap screw gr 8 yellow zn | 4 |
|
| OneMonroe | MN | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 3/8 | 3/8-16 x 3/8 shc 18-8 ss head dia .491-.479 | 50 |
|
| OneMonroe | MN | Metal Drill Bits | Steel | n | #n high speed bit | 4 |
| |
| OneMonroe | MN | L-Wrenches, Allen Wrenches & Torx Wrenches | center control-key ch501 | 1 |
| |||
| OneMonroe | MN | Protective Caps & Plugs | Plastic | Plain | 5 x 1 1/4 | wheel sz 5 x 1-1/4 mat polyurethane red on steel bearing ball bearing bore 3/8 hub length 1-1/2 load cap 300 lbs temp rt-45 to +180 f | 2 |
|
| Alma Bolt | MI | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Cadmium/Yellow | 1/4-28 | 1/4-28 jam pattern (21fk428) flexloc nut cadium plated | 280 |
| |
| Alma Bolt | MI | Self-Tapping Sheet Metal Screw (types a,b,ab) | Plain | #14 x 7/8 | #14 x 7/8 pan phillips type-a sms | 7568 |
| |
| Alma Bolt | MI | Self-Tapping Sheet Metal Screw (types a,b,ab) | Plain | #8 x 3 1/2 | #8 x 3 1/2 flat phillips type-a sms | 588 |
| |
| Alma Bolt | MI | Finished Hex Nut | Plain | 1-14 | 1-14 sae finished hex nut plain finish | 641 |
| |
| Alma Bolt | MI | Fully Threaded Stud (All Thread) | Grade B7 | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 1 1/8-8 x 8 1/4 | 1 1/8-8 x 8 1/4 b7 alloy stud teflon coated | 12 |
|
| baier & m | SC | Finished Hex Nut | Class 8.8 | null | M3 | hexagon nut m3 material steel. class 8 surface zinc nickel. silver. min. 8m. min. 720h without base metal corrosion | 34000 |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 3/16 | 8-32 x 3/16 phillips round m/s ss | 9000 |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 316, 317, A4 Stainless | Plain | 8 x 5/8 | 8 x 5/8 phillips ovalal a 316ss | 23000 |
|
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 1 1/8 | 3/8-16 x 1-1/8 soc hd cs ss | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10 x 1 1/2 | 10 x 1-1/2 phillips truss a ss/epoxy | inquire |
|
| Brikksen | FL | Flat Washer | Silicon Bronze | Plain | .281 x .687 x .050 | 1/4 flat washer .281 id x .687 od x .050 thk silicon bronze 100 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 2 3/4 | 1/4-20 x 2-3/4 phillips truss m/s ss low contour | inquire |
|
| Brikksen | FL | Carriage Bolt | 316, 317, A4 Stainless | Plain | 3/8-16 x 3 | 3/8-16 x 3 carr bolt 316 ss | inquire |
|
| Brikksen | FL | Tooth Lock Washer (Int. & Ext.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | #2 | #2 inter tooth l/w 410 ss | 190000 |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M4-0.70 x 30 | phillips flat head machine screw a2 ph m4-.70 x 30 din 965 | 200 |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 1 | 3/8-16 x 1 phillips truss m/s ss | 3000 |
|
| Brikksen | FL | Machine Screw | 316, 317, A4 Stainless | Plain | #8-32 x 5/8 | 8-32 x 5/8 phillips pan m/s 316ss/chrome | inqui re |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #12 x 1 1/4 | 12 x 1-1/4 phillips pan type-a ss | 13000 |
|
| Brikksen | FL | Hose Clamp | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 1/2 | #40 all 300 ss hose clamp 1/2 band 2-3 range | 600 |
| |
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 2 1/4 | 3/8-16 x 2-1/4 hex head cap screw 18-8 ss 10 per small bag 5 small bags per master pack-generic brand | 2000 |
|
| Brikksen | FL | Self-Tapping Self-Drilling Screw (Tek etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Zinc/Yellow | 8 x 3/4 | 8 x 3/4 square flat tek 18-8ss/zinc dichromate | 69000 |
|
| Brikksen | FL | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain | M12-1.75 x 55 | socket head cap screw partial thread a4-80 m12-1.75 x 55 din 912 | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 2 1/2 | 1/4-20 x 2-1/2 socket wafer m/s 18-8ss/chrome | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 3/4 | 5/16-18 x 3/4 phillips flat m/s ss/ch- | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | Silicon Bronze | Plain | 5/16-18 x 3 | 5/16-18 x 3 hx hd cs sil brnz | 1000 |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | #8 x 1 1/4 | 8 x 1-1/4 phillips pan type-a ss/black oxide- | 400 |
|
| Bossard | AZ | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | o-ring dash 005 epdm 0.07 in. pk100 | 80 |
| |
| Optimas | IL | Gloves & Hand Protection | xl | xl green glove | 27 |
| ||
| Optimas | IL | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 3/8-16 x 3/4 | 3/8-16 x 3/4 asme b18.2.1 hex cap screw grade 5 zinc trivalent full thread rohs | 500 |
|
| HYBROCO | MI | Resistance/Projection Weld Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 1/2 | 1/4-20 x 1/2 u3 weld stud ss | 1300 |
|
| American | WI | Blind Rivet | Aluminum | Plain | 3/16 (.376-.500) | 3/16x.376-.500 alum/steel rivet ad68bs pop rivet brand only rivpad68bs | 7895 |
|
| American | WI | Hoses | 1 1/4 | 1-1/4 avenger dinflex slider two wire braid hose 2000 psi sae100r16 | 45 |
| ||
| American | WI | Carriage Bolt | Grade 5 | Zinc/Clear | 1/2-13 x 1 1/2 | 1/2-13x1-1/2 nc short neck carriage bolt gr 5 zinc | 100 |
|
| Delta | TX | Cotter Pin (Split Pin) | Steel | Zinc/Clear | 7/32 x 2 | 1150 |
| |
| AFT Faste | TX | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M10-1.50 x 30 | M10-1.5x30 hex head cap screw alloy 10.9 zp din 933 | 1400 |
|
| AFT Faste | TX | Hole Saws | 2 1/4 | 2-1/4 bi-metal hole saw | 15 |
| ||
| Coburn Myers Fastening Systems | PA | Finished Hex Nut | Class 8.8 | Zinc/Clear | M8 | finished hex nut class 8 zinc/clear | 12 |
|
| Siena | IA | Cable Clamps & Ties | Nylon (Polyamide) | Plain | 28 x 120 | 28 inch 120 lb black uv cable tie ( metric 750x7.6) material nylon 6/6 50 pcs per bag carton quantity is 3000 pcs | 6000 |
|
| Brikksen | FL | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10 x 20 | dowel pin (m6 tolerance) a2 m10 x 20 din 7 | inquire |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #14 x 2 | 14 x 2 phillips truss type-a ss | 96000 |
|
| Brikksen | FL | Machine Screw | 316, 317, A4 Stainless | Plain | M4-0.70 x 20 | phillips flat head machine screw-50 per bag a4 ph m4-.70 x 20 din 965 | inquire |
|
| Brikksen | FL | Wood Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8 x 1 1/4 | 8 x 1-1/4 phillips flat w/s ss | inquire |
|
| Brikksen | FL | Fully Threaded Stud (All Thread) | 316, 317, A4 Stainless | Plain | 1/2-13 x 2 1/2 | 1/2-13 x 2-1/2 stud f/t 316ss | inquire |
|
| Brikksen | FL | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain | 1/2-13 x 1 | 1/2-13 x 1 socket head cs 316ss | 20 |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Chrome Plated | #6-32 | 6-32 hex m/s nut ss chrome- | 9000 |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M16-2.00 x 55 | hex head cap screw partial thread a2 m16-2.0 x 55 din 931 | inquire |
|
| Brikksen | FL | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M4 x 40 | dowel pin (m6 tolerance) a2 m4 x 40 din 7 | inquire |
|
| BEACON | IL | Machine Screw | Steel | Zinc/Clear | #10-24 x 2 | 10-24 x 2 phillips round head machine screw fully threaded steel trivalent zinc rohs compliant | 10000 |
|
| Hewes | NY | Button Head Socket Cap Screw | Steel | Zinc/Black | 1/4-20 x 1/2 | 1/4-20x1/2 button hd soc zinc black chromate | 2150 |
|
| FasSpcMfg | FL | Socket Head Cap Screw | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | 5/16-18 x 3 | 5/16-18 x 3 socket cap nitronic 50 | 1 |
|
| NutsBolts | NE | Hex Flange Screw w/ serr. (Whiz-Lock eq.) | Class 10.9 | Zinc/Clear | M16 | 16m-2.0 x 60mm serrated hex flange bolt zp 10.9 | | 1000 |
|
| OneMonroe | MA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 3/4 | 10-32 x 3/4 phillips pan machine screw 18.8 | 135 |
|
| OneMonroe | MA | Hex Head Cap Screw | Class 8.8 | Plain | M8-1.0-1.00 x 12 | m8-1.0 x 12 hcsz 8.8 | 50 |
|
| OneMonroe | MA | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6-1.0-1.00 x 10 | m6-1.0 x 10m socket set screw stainless | 2000 |
|
| OneMonroe | MA | Hex Tap Bolt (Fully Threaded) | Steel | Zinc/Clear | 3/8-16 x 2 3/4 | 3/8-16 x 2 3/4 tap bolt zinc pltd | 650 |
|
| OneMonroe | MA | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 7/8 | 5/16-18 x 7/8 socket cap screw stainless | 107 |
|
| Empire | WA | Metal Drill Bits | # x 5 13/64 | #xl5-13/64 brute splt pt drill | 12 |
| ||
| Empire | WA | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16 x 7/8 | 5/16 x 7/8 flat washer | 2645 |
|
| Empire | WA | Cable Clamps & Ties | 11 | 11 50# ul air hand cable tie | 2700 |
| ||
| Empire | WA | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 7/16-14 x 6 | 7/16-14 x 6 gr.8 hex c/s yzp | 24 |
|
| Empire | WA | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Plain | #8 x 1/2 | #8 x 1/2 oval phil t/s | 7800 |
|
| Empire | WA | Flat Head Socket Cap Screw | Class 10.9 | Plain | M3 x 12 | m3 x12mm soc flat c/s 10.9 | 93 |
|
| Empire | WA | Round Spacer | Nylon (Polyamide) | Plain | .187 x .115 x .4375 | .187x .115x .4375 nylon spacer | 100 |
|
| Empire | WA | Hex Head Cap Screw | Grade 2 | Zinc/Clear | 1/4 x 2 1/2 | 1/4 x 2 1/2 gr2 hex c/s zp | 525 |
|
| Empire | WA | Drywall Screw | Steel | Plain | 1 5/8 | 1-5/8 (pkgd) trim sq dr d/w bl | 299 |
|
| Empire | WA | Wood Drill Bits | x 17 | 8018-1-1/4 x 17 ship auger | 4 |
| ||
| Raw Produ | NJ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | #4-40 x 1/4 | phillips pan head ms black oxide 304 ss #4-40 x 1/4 | 1227 |
|
| Raw Produ | NJ | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | 1/4-20 x 1 | flat head socket cap screws black oxide 304 ss 1/4-20 x 1 | 6000 |
|
| Raw Produ | NJ | Hex Head Cap Screw | Grade 8 | Plain | 3/8-16 x 3 1/2 | hex cap screws grade 8 3/8-16 x 3-1/2 pt | 475 |
|
| Raw Produ | NJ | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | 1/4-20 x 2 1/2 | button socket cap screws-18-8 ss black oxide 1/4-20 x 2-1/2 | 500 |
|
| Raw Produ | NJ | Split Lock Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/8 | lock washers medium 304 ss 5/8 | 10103 |
|
| Raw Produ | NJ | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1/2-20 x 5 | hex cap screws grade 5 zinc 1/2-20 x 5 pt | 163 |
|
| Raw Produ | NJ | Eye Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 2 1/2 | eye bolts shld-304 ss 3/4-10 x 2-1/2 | 200 |
|
| Raw Produ | NJ | Split Lock Washer | Steel | Galvanized | 1/2 | split ring lock washers hdg 1/2 | 3082 |
|
| Raw Produ | NJ | L-Wrenches, Allen Wrenches & Torx Wrenches | M4 | long arm hex key m4 | 568 |
| ||
| Raw Produ | NJ | Self-Tapping Thread Cutting Screw (types f,1,23,25) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | #10-24 x 1/2 | torx flat head ms black oxide 304 ss #10-24 x 1/2 t-25 | 193 |
|
| Raw Produ | NJ | Hex Head Cap Screw | Steel | Galvanized | 1/4-20 x 3 1/2 | hex cap screws hdg 1/4-20 x 3-1/2 pt | 424 |
|
| AEROSPCE | MN | fhs-m5-18 pem 18mm long(flush-head)self-clinching | 211 |
| ||||
| F. Solutions | OH | Ceramic | core flame ceramic 4-1/2 x 5/8-11 40 grit t29 | 8 |
| |||
| F. Solutions | OH | Castle Nut (Hex) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/8-11 | hex castle nut 5/8-11 18.8 | 4 |
|
| F. Solutions | OH | F436 Round Structural Washer | Steel | Galvanized | 1 3/8 | flat 1-3/8 f436 hdg | 4 |
|
| F. Solutions | OH | Hex Head Cap Screw | Grade 5 | Zinc/Yellow | 1/2-13 x 6 | hex head cap screw 1/2-13x6 gr5 zinc yellow | 200 |
|
| F. Solutions | OH | Resistance/Projection Weld Stud | Steel | Copper Plated | #6-32 x 1 3/4 | 6-32 x 1 3/4 mini flanged weld screws copper plated | | 26490 |
|
| National | Ont | Weld Nut | Class 8.8 | Plain | M8-1.25 | m8 x 1.25 hex flange weld nut class 8 steel ps8955 ni c30 | 748597 |
|
| Mansco | MI | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/8-14 fin hex nut 18-8 s.s. | 70 |
| |
| Mansco | MI | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/16 x 1-3/4 std dowel pin 18-8 s.s. | 800 |
| |
| AFI | FL | Lock Nut with Tooth L/W (K-Lock, Keps, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3 | m3 keps nut ss din 934k () | 1388 |
|
| AFI | FL | Self-Clinching Standoff | Steel | Plain | blind threaded standoffs () | 7650 |
| |
| AFI | FL | Fully Threaded Stud (All Thread) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 2 | 1/4-20x2in full thd stud dbl cham ss () () | 600 |
|
| Global Fa | TX | Conical, Ribbed, Fluted Light Duty Plastic Anchor | Nylon (Polyamide) | Plain | 3/8 | 3/8 nylon hole/plug black keystone electronics 8602 | 153 |
|
| Olander | CA | Machine Screw | Steel | Zinc/Clear | 8-32 x 1 1/2 slot bind stl zn non-rohs | 381 |
| |
| Olander | CA | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 7/16-20 x 3 hx hd gr 5 zn non-rohs | 4 |
| |
| Olander | CA | Machine Screw | Steel | Cadmium | 440 x 5/16 phil flat 100 dg ms stl cad 2 | 1242 |
| |
| Olander | CA | Button Head Socket Cap Screw | Steel | Plain | 10-24 x 3/4 but soc alloy | 175 |
| |
| Olander | CA | Quick Access Panel Fasteners (1/4 Turn etc.) | southco 1/4 turn stud flsh hd | 27 |
| |||
| Olander | CA | southco retract scr assy | 6 |
| ||||
| Olander | CA | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | #6-32 | 6-32 locking tgls heli-coil ins nit60 primer T3585-06EPF207S () () | 1000 |
| ||
| Olander | CA | Hex Female/Female Standoff | Steel | Zinc/Clear | #6-32 x 1/4 x 1/4 | 6-32 x 1/4 x 1/4 hx stdf stl zn cr3 () () | 45 |
|
| Olander | CA | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | 1/4-20 | 1185-4enpf500 1/4-20 f/r heli-coil ins nit60 primer fr () () | 1066 |
|
| Mansco | MI | Coated Abrasives (Sanding Belts, Sandpaper, Flap Discs, etc.) | 2 x 60 | grit merit quick change disc ty-r y-wt a/o 2-ply 100/box | 50 |
| ||
| Mansco | MI | Grommets & Eyelets | Rubber, Buna-N, Neoprene etc. | Plain | 3/8 id x 7/8 od x 13/32 oah w/1/8 groove width 50a rubber grommet black | 3500 |
| |
| F. Solutions | OH | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 5/16 | phillips pan machine screw 8-32x5/16 18.8 | 550 |
|
| IRF | NC | Blind Rivet | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/16 x .656 | (.251-.375 grip) all 18-8 304 closed br rohs compliant | 430 |
|
| Arden | WI | Wood Screw | Steel | Zinc/Clear | #7 x 1/2 | 7x1/2 phillips flat ws zc | inquire |
|
| BHAM | AL | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | #10-24 x 1.5 | 10-24x1.5 dia. free running insert | 100 |
| ||
| FDL | IL | Finished Hex Nut | Grade 8 | Zinc/Yellow | 7/16-20 | 7/16-20 finished hex nut grade 8 zinc yellow, fine thread 2,200pcs/ctn 27kgs/ctn b18.2.2 | 2150 |
|
| THRDFAST | MS | Machine Screw | Steel | Zinc/Clear | #10-24 x 1 1/4 | slotted round m/s b18.6.3 | 148 |
|
| THRDFAST | OK | Hex Head Cap Screw | Grade 5 | Galvanized | 1/2-13 x 2 1/4 | gr5 hex c/s hdg b18.2.1 | 18 |
|
| THRDFAST | AL | Sockets | 1/2 | drivex35mm std socket | 1 |
| ||
| THRDFAST | FL | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M16-2.00 x 75 | hex c/s | 2 |
|
| THRDFAST | OK | F436 Beveled Structural Washer | Steel | Plain | 1 | 1 a325 square bevel domestic b18.23.1 b18.2.6 | 2 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B8 | Plain | 7/8-9 x 15 3/4 | astm a193 gr. b8 class 2 all thread stud ss | 800 |
|
| Lightning | LA | Bent Anchor Bolt (J-Bolt, L-Bolt) | Grade 5 | Galvanized | 1/2-13 x 18 | l-anchor low carbon hot dip 1 hook / 2 thread length / hdg | 114 |
|
| Lightning | LA | Bent Anchor Bolt (J-Bolt, L-Bolt) | Grade 5 | Galvanized | 1 1/4-7 x 22 1/2 | l-anchor low carbon hot dip 6-1/2 hook / 4 thread length / hdg | 98 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
