FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| THRDFAST | AL | Set Screw (Square Head) | Steel | Plain | 7/16-14 x 1/2 | square set cup pt b18.6.2 | 179 |
|
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-20 x 1/2 | 7/16-20 x 1/2 soc st cup pt ss screw | inquire |
|
| Accurate | IN | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16 x 1/2 | 7/16 f/w 18-8 1/2x1-1/8x.047 usa | 20000 |
|
| OneMonroe | MN | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 7/16 x 9/16 | 7/16 x 9/16 buna-n o-ring (013) | 350 |
|
| OneMonroe | MN | Set Screw (Socket Head) | Plain | 7/16-20 x 5/8 | 7/16 x 5/8 nf sss cp ss | 65 |
| |
| Raw Produ | NJ | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 3/4 | hex cap screws 304 ss 7/16-14 x 3/4 | 1317 |
|
| Alma Bolt | MI | Hex Head Cap Screw | Grade 8 | Plain | 7/16-20 x 3/4 | 7/16-20 x 3/4 grade 8 ally hcs sae | 645 |
|
| Lightning | LA | Shoulder Bolt (Stripper Bolt) | Steel | Black Oxide | 7/16 x 3/4 (5/16-18) | soc sh/b blk | 429 |
|
| Alma Bolt | MI | Dowel Pin | ASTM A574 | Plain | 7/16 x 3/4 | 7/16 x 3/4 alloy dowel pin | 74 |
|
| Raw Produ | NJ | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-20 x 3/4 | socket set screw 304 ss 7/16-20 x 3/4 | 1375 |
|
| Raw Produ | NJ | Hex Head Cap Screw | Grade 8 | Plain | 7/16-20 x 3/4 | hex cap screws grade 8 7/16-20 x 3/4 ft | 47 |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 3/4 | 7/16-14 x 3/4 hex hd cs ss f593c | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 3/4 | 7/16-14 x 3/4 hex head cap screw 18-8 ss 10 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-20 x 3/4 | 7/16-20 x 3/4 skt hd cs ss | inquire |
|
| Optimas | IL | Flat Washer | Steel | Black Oxide | 7/16 x 7/8 x 5/32 | 3/8 self-aligning setup female washer steel black oxide 7/16 x 7/8 x 5/32 | 71 |
|
| Raw Produ | NJ | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | 7/16-14 x 7/8 | hex cap screws 316 ss 7/16-14 x 7/8 ft | 96 |
|
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 1 | 7/16-14 x 1 soc hd cs s/s | 200 |
|
| NBS | IL | 12 Point Flange Screw (CounterBore) | null | Plain | 7/16-14 x 1 | 7/16-14 x 1 12 point flange bolt-furnace black (taiwan) | 10000 |
|
| Brikksen | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | 7/16-14 x 1 | 7/16-14 x 1 hex hd cs 316ss | inquire |
|
| OneMonroe | MN | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 7/16-20 x 1 | 7/16 x 1 nf gr5 hhc zp | 84 |
|
| Brikksen | FL | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 7/16-14 x 1 | 7/16-14 x 1 hex hd g5 s/zinc 087218 | inquire |
|
| NBS | IL | Dowel Pin | Steel | Plain | 7/16 x 1 | 7/16x1 dowel pin alloy bright finish. ( made in taiwan ) | 10000 |
|
| FasSpcMfg | FL | Shoulder Bolt (Stripper Bolt) | ASTM A574 | Plain | 7/16 x 1 (5/16-18) | 7/16 x 1 socket shoulder bolt alloy 5/16-18 x 5/8 thread | 6 |
|
| HYBROCO | MI | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 7/16-14 x 1 | 7/16-14 x 1 hhcs gr5 zn | 850 |
|
| Alma Bolt | MI | Dowel Pin | ASTM A574 | Plain | 7/16 x 1 | 7/16 x 1 alloy dowel pin | 357 |
|
| Raw Produ | NJ | Hex Head Cap Screw | Grade 2 | Zinc/Clear | 7/16-14 x 1 | hex cap screws grade 2 zinc 7/16-14 x 1 | 1126 |
|
| Brikksen | FL | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 7/16-14 x 1 | 7/16-14 x 1 hex hd g5 s/zinc 087218 | inquire |
|
| Raw Produ | NJ | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 7/16-14 x 1 1/8 | hex cap screws grade 5 zinc 7/16-14 x 1-1/8 ft | 641 |
|
| OneMonroe | MN | External Type C Retaining Ring (C-Clip) | Nylon (Polyamide) | Plain | 7/16 x 1 1/8 | glide grip ring stem nylon base base size 1-11/16 diameter step size 7/16 x 1-1/8 . | 321 |
|
| SWACO | OH | Hex Head Cap Screw | Grade 8 | Zinc/Clear | 7/16-14 x 1 1/4 | 7/16-14x1-1/4 hhcs gr8 zpycr3 ft usa | 48 |
|
| NBS | IL | Flange Screw w/o serr. (Frame Bolt) | Grade 9 | Phosphate | 7/16-14 x 1 1/4 | 7/16-14x1-1/4 gr.9 (alloy) frame bolt-non-indented-non-serrated-black phos. & oil (taiwan) | 10000 |
|
| Lightning | LA | Hex Head Cap Screw | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | 7/16-14 x 1 1/4 | 7/16-14x1 1/4 hex c/s 20 | 398 |
|
| Siena | IA | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 7/16-14 x 1 1/4 | 7/16-14 x 1-1/4 hex head cap grade 8 fullthread yellow zinc asme b18.2.1 | 44 |
|
| FasSpcMfg | FL | Machine Screw | Steel | Plain | 7/16-14 x 1 1/4 | 7/16-14 x 1-1/4 slotted fillister head machine screw 1018 steel | 5 |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-20 x 1 1/4 | 7/16-20 x 1-1/4 hx hd c/s ss f593c | inquire |
|
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | Steel | Zinc/Clear | 7/16 x 1 3/8 | swivel stem caster rig only accepts wheel sz 4 x 1 friction ring stem sz 7/16 x 1-3/8 . | 31 |
|
| Siena | IA | Eye Bolt | Steel | Zinc/Clear | 7/16-14 x 1 3/8 | 7/16-14 x 1-3/8 forged lifting eyebolt with shoulder steel zinc clear asme b18.15 | 225 |
|
| FasSpcMfg | FL | Socket Head Cap Screw | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 7/16-14 x 1 3/8 | 7/16-14 x 1-3/8 socket cap 2a fit full thread 410 stainless-soft | 16 |
|
| Raw Produ | NJ | Hex Head Cap Screw | Grade 8 | Plain | 7/16-14 x 1 3/8 | hex cap screws grade 8 7/16-14 x 1-3/8 ft | 345 |
|
| Field Fas | IL | Carriage Bolt | Grade 5 | Zinc/Yellow | 7/16-14 x 1 1/2 | 7/16-14 x 1 1/2 carriage bolt gr 5 zc/yellow 50 hour salt spray | 581 |
|
| CIF | IL | Hex Head Cap Screw | Grade 8 | Zinc/Clear | 7/16-20 x 1 1/2 | 7/16-20 x 1 1/2 hex cap screw grade 8 plated per tms 4523 | 13333 |
|
| Alma Bolt | MI | Plow Bolt, Scraper Blade Bolt | Grade 5 | Plain | 7/16-20 x 1 1/2 | 7/16-20 x 1 1/2 sae contour hd plw bl g5 | 375 |
|
| Centennia | CO | Hex Head Cap Screw | Grade 5 | Plain | 7/16-14 x 1 1/2 | 7/16-14 x 1 1/2 hex c/s gr5 nc dom | 290 |
|
| Olander | CA | Socket Head Cap Screw | ASTM A574 | Plain | 7/16-14 x 1 1/2 soc cap alloy | 25 |
| |
| Brikksen | FL | Hex Head Cap Screw | Grade 8 | Zinc/Clear | 7/16-14 x 1 1/2 | 7/16-14 x 1-1/2 hx hd g8 s/zd 455222 | 50 |
|
| Centennia | CO | Hex Machine Bolt | Grade A | Zinc/Clear | 7/16-14 x 1 1/2 | 7/16-14 x 1 1/2 nc a307a hex mach bolt zinc | 300 |
|
| F. Solutions | OH | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-20 x 1 1/2 | hex head cap screw 7/16-20(unf)x1-1/2 18.8 | 528 |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 1 1/2 | 7/16-14 x 1-1/2 hex head cs ss 25 per box f593c f-18box | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-20 x 1 1/2 | 7/16-20 x 1-1/2 hex cs ss f593c | 2000 |
|
| FasSpcMfg | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 1 1/2 | 7/16-14 x 1-1/2 socket cap full thread 18-8 stainless | 35 |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 1 1/2 | 7/16-14 x 1-1/2 hex head cap screw 18-8 ss 10 per small bag 5 small bags per master pack-generic brand | 100 |
|
| Brikksen | FL | Hex Head Cap Screw | Steel | Zinc/Clear | 7/16-14 x 1 1/2 | 7/16-14 x 1-1/2 hex hd cs s/zc | inquire |
|
| FDL | IL | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 7/16-14 x 1 1/2 | 7/16-14x1-1/2 hex cap screw grade 8 zinc yellow, coarse thread 500pcs/ctn 18kgs/ctn unc b18.2.1 | 450 |
|
| Longhorn | TX | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 7/16-14 x 1 1/2 | 7/16-14 x 1-1/2 hex cap gr 5 zinc | 3 |
|
| NBS | IL | 12 Point Flange Screw (CounterBore) | null | Plain | 7/16-20 x 1 1/2 | 7/16-20 x 1-1/2 12 point flange bolt-furnace black (taiwan) | 10000 |
|
| OneMonroe | MA | Hex Head Cap Screw | Grade 2 | Zinc/Clear | 7/16-14 x 1 1/2 | 7/16-14 x 1 1/2 hex cap screw grade 2 plated | 229 |
|
| THRDFAST | AL | Hex Tap Bolt (Fully Threaded) | Grade 5 | Zinc/Clear | 7/16-14 x 1 1/2 | hex t/b b18.2.1 | 119 |
|
| THRDFAST | AL | Hex Tap Bolt (Fully Threaded) | Grade 5 | Zinc/Clear | 7/16-14 x 1 3/4 | hex t/b b18.2.1 | 60 |
|
| SWACO | OH | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 7/16-20 x 1 3/4 | 7/16-20x1-3/4 hhcs gr5 zinc | 150 |
|
| NBS | CA | Flange Screw w/o serr. (Frame Bolt) | Grade 5 | Zinc/Clear | 7/16-14 x 1 3/4 | 7/16-14 x 1-3/4 gr.5 frame bolt-non-indented-non-serrated-trivalent rohs (taiwan) | 10000 |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-20 x 1 3/4 | 7/16-20 x 1-3/4 hex hd cs ss f593c | inquire |
|
| OneMonroe | MN | Hex Head Cap Screw | Grade B8M | Plain | 7/16 x 1 3/4 | 7/16 x 1 3/4 a193b7 fin hhc sc-1 coating | 8 |
|
| Lightning | LA | Hex Head Cap Screw | Grade 2 | Galvanized | 7/16-14 x 2 | hex c/s gr2. . | 130 |
|
| THRDFAST | AL | Set Screw (Square Head) | Steel | Plain | 7/16-14 x 2 | square set cup pt b18.6.2 | 102 |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 2 | 7/16-14 x 2 hex hd c/s s/s f593c | 1000 |
|
| SWACO | OH | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 7/16-14 x 2 | 7/16-14x2 hhcs gr5 zp | 584 |
|
| ASFCORP | MI | Socket Head Cap Screw | Steel | Black Oxide | 7/16-14 x 2 | 7/16-14 x 2 soc hd cap scw blk ox pkg | 25 |
|
| Brikksen | FL | Hex Head Cap Screw | Silicon Bronze | Plain | 7/16-14 x 2 | 7/16-14 x 2 hex head cs silicon bronze full thread | inquire |
|
| FasSpcMfg | FL | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain | 7/16-14 x 2 | 7/16-14 x 2 socket head cap screw316 stainless steel | 2 |
|
| OneMonroe | MN | Annular Cutters | Steel | 7/16 x 2 | 7/16 x 2 doc rotacutter annular hole cutter cobalt super hss frac | 4 |
| |
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 2 | 7/16-14 x 2 socket head cap screw 18-8 ss 5 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Delta | TX | Hex Head Cap Screw | Grade 2 | Zinc/Clear | 7/16-14 x 2 1/4 | c/s | 1694 |
|
| NBS | IL | Flange Screw w/o serr. (Frame Bolt) | Grade 8 | Zinc/Yellow | 7/16-14 x 2 1/4 | 7/16-14x2-1/4 grade 8 frame bolt-non-indented-non-serrated-zinc yellow (taiwan) | 10000 |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 2 1/4 | 7/16-14 x 2 1/4 hex head cs ss f593c | 500 |
|
| Centennia | CO | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 7/16-14 x 2 1/4 | 7/16-14 x 2 1/4 hex c/s gr5 nc dom zinc | 476 |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 2 1/4 | 7/16-14 x 2 1/4 hex head cs ss f593c | 300 |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-20 x 2 1/2 | 7/16-20 x 2-1/2 hex hd cs ss f593c | 20 |
|
| NBS | IL | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16 x 2 1/2 | 7/16x2-1/2 18-8 s/s steel dowel pin-asme b18.8.2-bright finish (taiwan) | 25000 |
|
| NBS | IL | Flange Screw w/o serr. (Frame Bolt) | Grade 9 | Phosphate | 7/16-14 x 2 1/2 | 7/16-14x2-1/2 gr.9 (alloy) frame bolt-non-indented-non-serrated-black phos. & oil (taiwan) | 10000 |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 2 1/2 | 7/16-14 x 2 1/2hex head cs ss/ft f593c | inquire |
|
| Kanebridge | IL | Hex Head Cap Screw | Grade 8 | Plain | 7/16-14 x 2 1/2 | 7/16-14x2 1/2 hex tap bolt ful thread gr8 plain tap bolts | 3500 |
|
| Lightning | LA | Hex Head Cap Screw | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | 7/16-14 x 2 1/2 | hex c/s hastelloy c-276 | 13 |
|
| NBS | IL | Flange Screw w/o serr. (Frame Bolt) | Grade 8 | Zinc/Yellow | 7/16-14 x 2 1/2 | 7/16-14x2-1/2 grade 8 frame bolt-non-indented-non-serrated-zinc yellow (taiwan) | 10000 |
|
| NBS | CA | Flange Screw w/o serr. (Frame Bolt) | Grade 8 | Phosphate | 7/16-14 x 2 1/2 | 7/16-14 x 2-1/2 gr.8 frame bolt-non-indented-non-serrated-black phos. & oil (taiwan) | 10000 |
|
| OneMonroe | MN | Hex Head Cap Screw | Grade 5 | Plain | 7/16-14 x 2 3/4 | 7/16-14 x 2-3/4 plain finish sae j429 grade 5 hex cap screw | 424 |
|
| F. Solutions | OH | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 3 | hex head cap screw 7/16-14x3 304 ss | 25 |
|
| Lightning | LA | Threaded Rod | Grade B7 | Plain | 7/16-14 x 3 | ft astm a193 b7 all thread rod | 153 |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 3 | 7/16-14 x 3 hex head cap screw 18-8 ss 10 per small bag 5 small bags per master pack-generic brand | inquire |
|
| OneMonroe | MN | Hex Head Cap Screw | Grade 8 | Plain | 7/16 x 3 | 7/16 x 3 gr8 hhc | 100 |
|
| Brikksen | FL | Threaded Rod | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-20 x 3 | 7/16-20 x 3 full thread rod ss | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 3 | 7/16-14 x 3 hex head cap screw 18-8 ss 10 per small bag 5 small bags per master pack-generic brand | inquire |
|
| NBS | IL | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16 x 3 | 7/16x3 18-8 s/s steel dowel pin-asme b18.8.2-bright finish (taiwan) | 25000 |
|
| Brikksen | FL | Carriage Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 3 | 7/16-14 x 3 carriage bolt 18-8 ss | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 3 1/4 | 7/16-14 x 3 1/4 hex hd cs ss f593c | inquire |
|
| NBS | IL | Flange Screw w/o serr. (Frame Bolt) | Grade 5 | Zinc/Clear | 7/16-14 x 3 1/2 | 7/16-14x3-1/2 gr.5 frame bolt-non-indented-non-serrated-trivalent rohs (taiwan) | 10000 |
|
| Brikksen | FL | Carriage Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 3 1/2 | 7/16-14 x 3-1/2 carriage bolt ss | inquire |
|
| NBS | IL | Flange Screw w/o serr. (Frame Bolt) | Grade 9 | Phosphate | 7/16-14 x 3 1/2 | 7/16-14x3-1/2 gr.9 (alloy) frame bolt-non-indented-non-serrated-black phos. & oil (taiwan) | 10000 |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 3 1/2 | 7/16-14 x 3-1/2 hex head cap screw 18-8 ss 5 per small bag 5 small bags per master pack-generic brand | inquire |
|
| OneMonroe | MN | Hex Head Cap Screw | Grade 2 | Plain | 7/16 x 3 1/2 | 7/16 x 3 1/2 gr2 hhc | 200 |
|
| THRDFAST | AL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | 7/16-14 x 3 3/4 | t-316 ss hex c/s b18.2.1 | 236 |
|
| OneMonroe | MN | Masonry & Concrete Drill Bits | Steel | 7/16 x 4 x 6 | 7/16 x 4 x 6 speedemon red granite carbide tipped hammer drill bit | 6 |
| |
| Brikksen | FL | Fully Threaded Stud (All Thread) | Brass | Plain | 7/16-14 x 4 | 7/16-14 x 4 stud f/t brass | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 4 | 7/16-14 x 4 hex head cap screw 18-8 ss 5 per small bag 5 small bags per master pack-generic brand | inquire |
|
| NBS | CA | Flange Screw w/o serr. (Frame Bolt) | Grade 8 | Zinc/Yellow | 7/16-20 x 4 | 7/16-20 x 4 gr.8 frame bolt-non-indented-non-serrated-zinc yellow (taiwan) | 10000 |
|
| OneMonroe | MA | Handles | 7/16 x 4 1/4 | handle nut 7/16x4-1/4 | 596 |
| ||
| OneMonroe | MN | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 7/16-20 x 4 1/2 | 7/16-20 x 4-1/2 gr.5 hx hd c/s-zp | 5 |
|
| Optimas | IL | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 7/16-14 x 4 1/2 | 7/16-14 x 4 1/2 hex cap screw grade 8 zinc yellow | 100 |
|
| Brikksen | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | 7/16-14 x 4 1/2 | 7/16-14 x 4-1/2 hx hd cs 316ss | inquire |
|
| OneMonroe | MN | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 7/16-20 x 5 | 7/16-20 x 5 gr.5 hx hd c/s-zp | 15 |
|
| Brikksen | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | 7/16-14 x 5 | 7/16-14 x 5 hex head cs full thread 316 ss | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 5 | 7/16-14 x 5 hx hd c/s ss f593c | 80 |
|
| SWACO | OH | Eye Bolt | Steel | Zinc/Clear | 7/16 x 5 1/4 | 7/16x5-1/4 lag eye bolt zinc | 30 |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 5 1/2 | 7/16-14 x 5 1/2 hx hd c/s ss f593c | 20 |
|
| Brikksen | FL | Hex Head Cap Screw | Grade 8 | Zinc/Clear | 7/16-14 x 6 | 7/16-14 x 6 hex hd gr 8 s/zd | inquire |
|
| OneMonroe | MN | Carriage Bolt | Grade A | Zinc/Clear | 7/16-14 x 6 | 7/16-14 x 6 zinc finish astm a307 grade a round head carriage bolt | 15 |
|
| SWACO | OH | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 7/16-14 x 6 | 7/16-14x6 hhcs gr5 zp | 250 |
|
| THRDFAST | AL | Hex Head Cap Screw | Grade 8 | Plain | 7/16-14 x 6 | gr8 hex c/s b18.2.1 | 5 |
|
| F. Solutions | OH | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 6 | hex head cap screw 7/16-14x6 304 ss | 5 |
|
| OneMonroe | MN | Carriage Bolt | Grade 5 | Zinc/Clear | 7/16-14 x 6 | 7/16-14 x 6 gr.5 carr bolt-zp | 125 |
|
| OneMonroe | MN | Eye Bolt | Steel | Zinc/Clear | 7/16 x 6 | 7/16 x 6 lag screw eye bolt-zp | 42 |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 6 | 7/16-14 x 6 hex head c/s s/s f593c | 3000 |
|
| Alma Bolt | MI | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 7/16-14 x 7 1/2 | 7/16-14 x 7 1/2 gr 8 alloy hhcs zinc-yellow | 117 |
|
| Alma Bolt | MI | Hex Head Cap Screw | Grade 5 | Plain | 7/16-14 x 8 | 7/16-14 x 8 grade 5 hex head cap screw | 577 |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 8 | 7/16-14 x 8 hex hd cs ss f593c | inquire |
|
| Alma Bolt | MI | High Hex Nut | Plain | 7/16-20 | 7/16-20 sae high nut (sae j482)(sae j995) | 1307 |
| |
| OneMonroe | MN | Ball Bearings, Balls, Bearing Mounts | Plain | 7/16 | flange bearing 7/16 hex | 20 |
| |
| Raw Produ | NJ | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 x 2 1/2 | socket set screw 304 ss 7/16-14 x 2-1/2 | 500 |
|
| OneMonroe | MN | Split Lock Washer | Grade 8 | Zinc/Yellow | 7/16 | 7/16 gr8 lock washer zy | 30 |
|
| Alma Bolt | MI | Lifting Hooks, Rings & Snaps (Slip Hooks, Snap Shackles, etc.) | Plain | 7/16 | 7/16 clevis slip hook latched | 13 |
| |
| Raw Produ | NJ | Hex Head Cap Screw | Grade 8 | Plain | 7/16-14 x 3 | hex cap screws grade 8 7/16-14 x 3 pt | 441 |
|
| SPC | TX | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain | 7/16-20 | flexloc 20fk-720 7/16-20 light hex thin height flexslot steel plain | 31410 |
|
| F. Solutions | OH | Heavy Hex Nut | Grade 2 | Zinc/Clear | 7/16-14 | heavy hex nut 7/16-14 gr2 zinc plated | 708 |
|
| Brikksen | FL | Hex Jam Nut | 316, 317, A4 Stainless | Plain | 7/16-14 | 7/16-14 hex jam nut 316ss | inquire |
|
| Brikksen | FL | Split Lock Washer | Plain | 7/16 | 7/16 med. lock washer s/z .109 min thk 349009 | inquire |
| |
| Raw Produ | NJ | Hex Head Cap Screw | Steel | Galvanized | 7/16-14 x 2 | hex cap screws hdg 7/16-14 x 2 pt | 293 |
|
| Olander | CA | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 7/16-20 x 2 hex hd gr8 ylw zn non-rohs | 3 |
| |
| Empire | WA | Lock Nut, Nylon Insert | Steel | Plain | 7/16-14 | 7/16-14 nylon insert l/n | 81 |
|
| Brikksen | FL | Cable Clamps & Ties | Nylon (Polyamide) | 7/16 | 7/16 cable clamp nat. nylon micro#22cc37c0437 cmc-3461-8-st10 | 4000 |
| |
| Brikksen | FL | Heavy Hex Nut | 316, 317, A4 Stainless | Plain | 7/16-14 | 7/16-14 hv hx nut 316ss | 3000 |
|
| Longhorn | TX | Hex Head Cap Screw | Grade 8 | Zinc/Clear | 7/16-20 x 2 3/4 | 7/16-20 x 2-3/4 hex cap gr 8 zinc | 69 |
|
| Alma Bolt | MI | Lock Nut, Nylon Insert | Plain | 7/16-14 | 7/16-14 uss (nte series) nylon insert jam nut | 4000 |
| |
| Mansco | MI | Lock Nut, Nylon Insert | Steel | Zinc/Clear | 7/16-20 | 7/16-20 hex nylon insert locknut ne pattern znc 50/box | 51 |
|
| Raw Produ | NJ | Heavy Hex Nut | Steel | Zinc/Clear | 7/16-14 | zinc heavy hex nuts-7/16-14 | 816 |
|
| Brikksen | FL | Tooth Lock Washer (Int. & Ext.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 7/16 | 7/16 internal tooth l/w 410ss | 1000 |
|
| Centennia | CO | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade C | Cadmium | 7/16-20 | 7/16-20 locknut grade c cad | 150 |
|
| Brikksen | FL | Split Lock Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16 | 7/16 lock washer 18-8 ss 50 per small bag 5 small bags per master pack-generic brand | inquire |
|
| NAPPCO | TX | Metal Drill Bits | Plastic | Plain | 7/16 | 7/16 hs 60 drill bit for plastics acrylics | 6 |
|
| OneMonroe | MN | Weld Nut | Steel | Plain | 7/16-20 | 7/16-20 hex piloted weld nut w/6 proj steel plain | 1200 |
|
| Brikksen | FL | Lock Nut, Nylon Insert | 316, 317, A4 Stainless | Plain | 7/16-14 | 7/16-14 nylon insert l/n 316ss | 2000 |
|
| Centennia | CO | USS Flat Washer | Steel | Zinc/Clear | 7/16 | 7/16 uss flat washer zinc | 1300 |
|
| IRF | NC | USS Flat Washer | Steel | Zinc/Clear | 7/16 | USS flat stl | 3,143 |
|
| SWACO | OH | Hex Jam Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-20 | 7/16-20 fin hx jam nut 18-8 s/s | 810 |
|
| General F | MI | Square Washer (Flat & Curved) | Steel | Zinc/Clear | 7/16 | spcl 7/16 sq hole .0003 zinc | 56250 |
|
| Brikksen | FL | Cap Nut (Acorn Nut) | 316, 317, A4 Stainless | Plain | 7/16-20 | 7/16-20 cap nut 316 ss p/n 4736p | inquire |
|
| American | WI | Hex Head Cap Screw | Grade 5 | Zinc/Yellow | 7/16-14 x 2 1/2 | 7/16-14x2-1/2 nc hex hd c/s gr 5 zinc yellow | 130 |
|
| Brikksen | FL | Split Lock Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16 | 7/16 lock washer 18-8 ss 50 per small bag 5 small bags per master pack-generic brand | inquire |
|
| OneMonroe | MN | External Type E Retaining Ring (E-Clip) | Plain | 7/16 | 7/16 e-clip-s/s | 400 |
| |
| Raw Produ | NJ | Hex Head Cap Screw | Grade 8 | Plain | 7/16-14 x 5 | hex cap screws grade 8 7/16-14 x 5 pt | 146 |
|
| Brikksen | FL | Split Lock Washer | Plain | 7/16 | 7/16 med. lock washer s/z .109 min thk 349009 | inquire |
| |
| OneMonroe | MN | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Zinc/Clear | 7/16-20 | 7/16 nf stover ln c zp | 43 |
|
| Brikksen | FL | Split Lock Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16 | 7/16 med lock washer ss .109 min thk | 6000 |
|
| Mansco | MI | Finished Hex Nut | Steel | Zinc/Black | 7/16-20 | fin hex nut triv blk znc | 1500 |
|
| SPC | TX | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain | 7/16-14 | 7/16-14 heavy hex thin height flexslot steel plain 20fk-714 | 400 |
|
| Raw Produ | NJ | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 | nylon lock nuts 304 ss 7/16-14 | 6981 |
|
| Brikksen | FL | Cap Nut (Acorn Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 | 7/16-14 cap (acorn) nut 18-8 ss 10 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Raw Produ | NJ | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 7/16-20 x 4 | hex cap screws grade 5 zinc 7/16-20 x 4 pt | 144 |
|
| Brikksen | FL | Hex Jam Nut | Plain | 7/16-20 | 7/16-20 finished hex jam nut asme | 20850 |
| |
| SWACO | OH | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16 | an960c716/7/16 f/w s/s nas1149c0763r | 469 |
|
| Brikksen | FL | Cable Clamps & Ties | Nylon (Polyamide) | 7/16 | 7/16 cable clamp nat. nylon micro#22cc37c0437 cmc-3461-8-st10 | inquire |
| |
| THRDFAST | AL | Finished Hex Nut | Steel | Plain | 7/16 | nf-20 left hand hex nut b18.2.2 | 16 |
|
| F. Solutions | OH | Lock Nut, Nylon Insert | Grade A | Zinc/Yellow | 7/16-14 | nylon insert lock nut 7/16-14 gr a zinc yellow | 1950 |
|
| OneMonroe | MN | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16 | 7/16 type-b narrow fw ss | 14 |
|
| F. Solutions | OH | Finished Hex Nut | Grade 8 | Zinc/Clear | 7/16-14 | finished hex nut 7/16-14 grade 8 domestic zinc plated per astm b633 type-1 class 12 | 200 |
|
| Brikksen | FL | Flat Washer | Brass | Plain | 7/16 | 7/16 flat washer brass (.500 x 1.125 x .081) | inquire |
|
| Brikksen | FL | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade C | Zinc/Clear | 7/16-20 | 7/16-20 stover l/n gr c s/zd | 400 |
|
| Irwin Ind | Ont | Finished Hex Nut | Grade 8 | Zinc/Yellow | 7/16-14 | 7/16-14 unc grade 8 fin hex nut zinc dichromate b18.2.2 | 350 |
|
| Brikksen | FL | Flat Washer | 316, 317, A4 Stainless | Plain | 7/16 | 7/16 flat washer 316 ss-no 316 stamp .475-.485 id x .932-.942 od x .045-.065 thk bulk-generic brand | inquire |
|
| Brikksen | FL | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-14 | 7/16-14 hex nut 18-8 ss 50 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Grade C | Zinc/Clear | 7/16-20 | 7/16-20 stover l/n gr c s/zd | inquire |
|
| Raw Produ | NJ | Weld Nut | Steel | Plain | 7/16-14 | hex weld nuts plain long pilot 3 projections 7/16-14 | 703 |
|
| Brikksen | FL | Lock Nut, Top Locking, All Metal (Automation style, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-20 | 7/16-20 top lock nut ss | inquire |
|
| Raw Produ | NJ | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 7/16-20 x 4 1/2 | hex cap screws grade 5 zinc 7/16-20 x 4-1/2 pt | 377 |
|
| Brikksen | FL | Cap Nut (Acorn Nut) | 316, 317, A4 Stainless | Plain | 7/16-20 | 7/16-20 cap nut 316 ss p/n 4736p | 500 |
|
| OneMonroe | MA | Internal Type HO Retaining Ring | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16 | 2 7/16 internal snap ring s/s | 50 |
|
| Brikksen | FL | Lock Nut, Nylon Insert | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16-20 | 7/16-20 nylon insert hex lock nut 18-8 ss 25 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Kanebridge | IL | Hex Jam Nut | Grade 8 | Zinc/Yellow | 7/16-14 | 7/16-14 hex jam nut gr8 zinc yellow nuts | 20000 |
|
| Raw Produ | NJ | Hex Head Cap Screw | Grade 8 | Plain | 7/16-20 x 3 3/4 | hex cap screws grade 8 7/16-20 x 3-3/4 pt | 174 |
|
| Olander | CA | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain | 7/16-14 locking heli-coil twins inner | 6 |
| ||
| THRDFAST | MS | Machine Taps | 7/16-14 | taper tap | 1 |
| ||
| Centennia | CO | Finished Hex Nut | Steel | Zinc/Clear | 7/16-20 | 7/16-20 hex finish nut zinc | 2669 |
|
| THRDFAST | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16 | nf-20x3 18-8 ss hex c/s b18.2.1 | 44 |
|
| Alma Bolt | MI | Lock Nut, Flange, w/o serrations | Grade F | Plain | 7/16-20 | 7/16-20 sae grade f plain finish flanged hex nut (no lock) | 2138 |
|
| SWACO | OH | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 7/16 | 7/16 .469 x .922 x .065 f/w s/s ms15795-816 | 68 |
|
| Bossard | AZ | Dowel Pin | Steel | Plain | dowel pin 7/16 long wm berg/rexnord | 5 |
| |
| Brikksen | FL | Split Lock Washer | 316, 317, A4 Stainless | Plain | 7/16 | 7/16 med lock washer 316ss .109 min thk | inquire |
|
| OneMonroe | MN | Metal Drill Bits | Steel | 7/16 | 7/16 h.s. drill bit-jobber 3/8in shank | 2 |
| |
| Raw Produ | NJ | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 7/16-20 x 3 3/4 | hex cap screws grade 5 zinc 7/16-20 x 3-3/4 pt | 43 |
|
| OneMonroe | MN | External Type E Retaining Ring (E-Clip) | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | 7/16 | 7/16 ext ret ring (e type) ph15-7mo ss (xe0043hstb) | 100 |
|
| Arden | WI | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | 7/16 | 7/16 internal lock washer mech zc | inquire |
|
| Mansco | MI | Set Screw (Socket Head) | Steel | Plain | 7/16-14 x 2 soc set scr cone pt pln | 51 |
| |
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
