.png)
FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| SRF | AL | Finished Hex Nut | Steel | Nickel Plated | 11/16-16 x .019 | oil cooler nut nickle | - |
|
| Mansco | MI | O-Rings & Quad Ring Seals (X-Rings) | 11/16 x 1/16 | 11/16 odx1/16 thk o-ring | 2000 |
| ||
| Endries | WI | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 11/16 x 1/8 | 209 11/16x1/8 viton 75 durometer black o-ring | 135 |
|
| Kanebridge | IL | Cable Clamps & Ties | Nylon (Polyamide) | Plain | 11/16 x .203 x .75 | 11/16x.203x.75 heavy duty cable clamps nylon | 62.500 |
|
| OneMonroe | MN | Heavy Hex Nut | Steel | Plain | 11/16 x 23/64 | 3/8-16 hvy hex nut 11/16 x 23/64 stl | 800 |
|
| OneMonroe | MN | Finished Hex Nut | Grade 8 | Zinc/Clear | 11/16 x 3/8 | 7/16-20 fin nut gr8 11/16 x 3/8 stl zncyl | 230 |
|
| Liberty | IL | Flat Washer | Nylon (Polyamide) | Plain | 11/16 x 1/2 x 3/64 | flat nylon | 7,300 |
|
| XL Screw | GA | F436 Round Structural Washer | Steel | Plain | 11/16 | astm f436 type-1 round structural thru-hard rc 38-45 | 9,000 |
|
| XL Screw | GA | F436 Round Structural Washer | Steel | Zinc/Yellow | 11/16 | astm f436 type-1 round structural thru-hard rc 38-45 zyd | 9,000 |
|
| QFC | TX | Milling Cutters (End Mills, Face Mills etc.) | 11/16 x 3/4 | 11/16x3/4 ca 2f reg s-cc-f | 1 |
| ||
| FastWare | Sask | Panel Nut | Brass | Plain | 11/16-16 x 13/16 | afx9/32 nf hex panel nut | 350 |
|
| OneMonroe | MN | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 11/16 x 13/16 x 1/16 | 11/16 x 13/16 x 1/16 buna o-ring 70 duro | 66 |
|
| Endries | WI | Snap Bushings, Strain Relief Bushings | 11/16 x 7/8 | 2126 11/16x7/8 mntg hole snap bushing (heyco only) | 2400 |
| ||
| NutsBolts | NE | O-Rings & Quad Ring Seals (X-Rings) | 11/16 x 7/8 x 3/32 | 11/16 x 7/8 x 3/32 o-ring-115 | 275 |
| ||
| OneMonroe | MN | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 11/16 x 7/8 x 3/32 | 11/16 x 7/8 x 3/32 buna 90 o-ring | 212 |
|
| OneMonroe | MN | O-Rings & Quad Ring Seals (X-Rings) | Plain | 11/16 x 15/16 x 0.139 | #209 11/16 id x 15/16 od 0.139 cross section nitrile standard o-ring | 200 |
| |
| THRDFAST | OK | Annular Cutters | 11/16 x 1 | annular cutter | 3 |
| ||
| Mansco | MI | Round Spacer | Steel | Zinc/Clear | 11/16 x 1 x 3/8 | 11/16 idx1 odx3/8 thk steel spacer znc | 66 |
|
| Endries | WI | Flat Washer | Steel | Zinc/Yellow | 11/16 x 1 x .060 | 11/16x1x.060 flat yellow zinc | 1340 |
|
| NutsBolts | NE | Annular Cutters | 11/16 x 1 | 11/16 x 1 annular cutter | 4 |
| ||
| KBS | TN | Annular Cutters | 11/16 x 1 | 11/16 x 1 hss-co annular cutters silverline | 7 |
| ||
| Perigee | MI | Finished Hex Nut | Grade A | Plain | 11/16-16 x 1 x 3/8 | 11/16-16 x 1 x 3/8 spcl hex nut b18.2.2 | 643 |
|
| Perigee | MI | Finished Hex Nut | Steel | Plain | 11/16-18 x 1 x 5/8 lh | 11/16-18 x 1 x 5/8 lh deep cbore nut b18.2.2 | 214 |
|
| Perigee | MI | Finished Hex Nut | Steel | Plain | 11/16-18 x 1 x 5/8 rh | 11/16-18 x 1 x 5/8 rh deep cbore nut b18.2.2 | 119 |
|
| Perigee | MI | Finished Hex Nut | Steel | Plain | 11/16-18 x 1 x 5/8 lh | 11/16-18 x 1 x 5/8 lh deep cbore nut b18.2.2 | 150 |
|
| Perigee | MI | Hex Jam Nut | Grade 2 | Zinc/Yellow | 11/16-16 x 1 x 1/4 | 11/16-16 x 1 x 1/4 hex jam nut b18.2.2 | 2396 |
|
| Perigee | MI | Finished Hex Nut | Steel | Plain | 11/16-18 x 1 x 5/8 rh | 11/16-18 x 1 x 5/8 rh deep cbore nut b18.2.2 | 138 |
|
| NAPPCO | TX | Grommets & Eyelets | Rubber, Buna-N, Neoprene etc. | Plain | 11/16 x 1 | 11/16x1 rubber grommet | 82 |
|
| NBS | CA | Dowel Pin | Steel | Plain | 11/16 x 1 | 11/16x1 dowel pin alloy bright finish. ( made in taiwan ) | 10000 |
|
| Endries | WI | Grommets & Eyelets | 11/16 x 1 1/16 x 1/4 | 11/16x1-1/16x1/4 sbr 55a duro grommet black | 800 |
| ||
| AFI | FL | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 11/16 x 1 1/16 x 3/16 | 11/16x1-1/16x3/16 o-ring buna-n-70 () | 615 |
|
| Century | FL | Flat Washer | Steel | Galvanized | 11/16 x 1 1/16 x 5/32 | 11/16 x 1 1/16 x 5/32 flat washer steel hot dip galv. | 353 |
|
| Liberty | IL | Flat Washer | Steel | Zinc/Clear | 11/16 x 1 1/8 x 1/8 | flat washer | 2,540 |
|
| Perigee | MI | Hex Jam Nut | Steel | Cadmium | 11/16-18 x 1 1/8 x .370 | 11/16-18 x 1-1/8 x .370 spcl hex jam nut lh threa b18.2.2 | 136 |
|
| Perigee | MI | Hex Jam Nut | Steel | Cadmium | 11/16-18 x 1 1/8 x 3/8 | 11/16-18 x 1-1/8 x 3/8 special hex jam nut b18.2.2 | 168 |
|
| Perigee | MI | Finished Hex Nut | Grade 2 | Zinc/Clear | 11/16-18 x 1 1/8 x 5/16 | 11/16-18 x 1-1/8 x 5/16 hex nut b18.2.2 | 165 |
|
| Perigee | MI | Finished Hex Nut | Steel | Zinc/Clear | 11/16-18 x 1 1/8 x 5/16 | 11/16-18 x 1-1/8 x 5/16 hex nut b18.2.2 | 16 |
|
| Perigee | MI | Slotted Hex Nut | Grade 8 | Plain | 11/16-16 x 1 1/8 x 39/64 | 11/16-16 x 1-1/8 x 39/64 slotted hex nut b18.2.2 | 143 |
|
| Endries | WI | Sealing Washer, Sealing Ring | Rubber, Buna-N, Neoprene etc. | Plain | 11/16 x 1 1/4 x 1/8 60 | 11/16x1-1/4x1/8 60duro epdm seal black | 1775 |
|
| Liberty | IL | Flat Washer | Steel | Plain | 11/16 x 1 1/4 x 1/4 | flat washer | 80 |
|
| ACCURATE | IL | Flat Washer | Steel | Nickel Plated | 11/16 x 1 1/4 x 1/16 | flat flat s | 5,200 |
|
| ACCURATE | IL | Flat Washer | Fiber | Plain | 11/16 x 1 1/4 x 0.065 | flat flat s | 10,000 |
|
| NutsBolts | NE | Tubing | Steel | Plain | 11/16 x 1 1/4 x 24 | 11/16 x 1 1/4 x 24 plain 1020 steel tubing | 5912 |
|
| Endries | WI | Grommets & Eyelets | Steel | Plain | 11/16 x 1.31 x .125 | ms35489-48 11/16x1.313x .438x1/8 groove grommet black | 9154 |
|
| HBBOLT | CA | Flat Washer | Steel | Plain | 11/16 x 1 3/8 x 1/4 | 11/16 idx1 3/8 odx1/4 tk mild primed with tnemec 90-97 primed with tnemec 90-97 | 18 |
|
| THRDFAST | AL | Square Washer (Flat & Curved) | Steel | Plain | 11/16 x 1 1/2 | 11/16 idx1-1/2 square fill | 471 |
|
| Liberty | IL | Flat Washer | Steel | Zinc/Clear | 11/16 x 1 1/2 x .150 | flat plate flat plate | 2,000 |
|
| Mansco | MI | Hose Clamp | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 11/16 x 1 1/2 | size 16 18-8 304 hose clamp 10/box | 100 |
|
| NBS | IL | Dowel Pin | Steel | Plain | 11/16 x 1 1/2 | 11/16x1-1/2 dowel pin alloy bright finish. ( made in taiwan ) | 10000 |
|
| Jackson | MS | Steel | Plain | 11/16 x 16 | pin drift button head semi cone point (3/4 pitch diameter) | 405 |
| |
| Liberty | IL | Flat Washer | Steel | Zinc/Clear | 11/16 x 1 3/4 x 1/4 | 11/16 idx1-3/4 odx1/4 thick flat | 550 |
|
| ACCURATE | IL | Flat Washer | Fiber | Plain | 11/16 x 1 3/4 x 1/16 | flat s | 15,000 |
|
| FastWare | Sask | Wood Drill Bits | 11/16 x 18 | oal ship auger bit | 1 |
| ||
| HBBOLT | CA | Nails | 11/16 x 18 | nail bomber mag303dlx | 4 |
| ||
| Northern | MN | Wood Drill Bits | 11/16 x 18 | 11/16x18 utility pole auger bit | 4 |
| ||
| Cal Fastenrs | CA | O-Rings & Quad Ring Seals (X-Rings) | Plain | 11/16 x 1 7/8 x 3/32 | 1 11/16 x 1 7/8 x 3/32 o-ring nbr 70 duro black ac# or-131 | ac# or-131 | ac# or-131 | 2,000 |
| |
| HBBOLT | CA | Flat Washer | Steel | Plain | 11/16 x 2 x 1/4 | 11/16 idx2 odx1/4 thk flat | 21 |
|
| Endries | WI | Machine Key (Square & Rectangular) | Plain | 11/16 x 2 | 11/16x2 square machine key undersized plain | 2 |
| |
| Endries | WI | Square Washer (Flat & Curved) | Steel | Galvanized | 11/16 x 2.0 x 1/8 | 11/16x2.0x1/8 square hot dip galvanized | 1557 |
|
| NutsBolts | NE | Shaft Collars, & Adjusting Rings | 11/16 x 2 | 11/16 2pc set collar black | 36 |
| ||
| NutsBolts | NE | Annular Cutters | 11/16 x 2 | 11/16 x 2 annular cutter | 3 |
| ||
| KBS | TN | Annular Cutters | 11/16 x 2 | 11/16 x 2 hss-co annular cutters cobalt m35 | 5 |
| ||
| Liberty | IL | Square Washer (Flat & Curved) | Steel | Zinc/Yellow | 11/16 x 2 x .093 | square & & | 850 |
|
| Mansco | MI | Square Washer (Flat & Curved) | Steel | Black Oxide | 11/16 x 2 x 2 | 11/16 idx2 x 2x1/4 thk square f/w hardened 50/box | 88 |
|
| THRDFAST | FL | Annular Cutters | 11/16 x 2 | annular cutter carbide tip | 2 |
| ||
| NBS | CA | Dowel Pin | Steel | Plain | 11/16 x 2 | 11/16x2 dowel pin alloy bright finish. ( made in taiwan ) | 10000 |
|
| Jackson | MS | Steel | Plain | 11/16 x 22 | pin drift button head semi cone point (3/4 pitch diameter) | 204 |
| |
| QFC | TX | Round Spacer | Grade A36 | Galvanized | 11/16 x 2 3/8 | round spacer 11/16 id x 2 od 3/8 thk a36 hdg | 150 |
|
| Jackson | MS | Steel | Plain | 11/16 x 24 | pin drift button head semi cone point (3/4 pitch diameter) | 308 |
| |
| MidStates | MI | Pull-Out Dowel Pin (Threaded Pin) | Steel | Plain | 11/16 x 2 1/2 | pull | 25 |
|
| Liberty | IL | Flat Washer | Steel | Zinc/Yellow | 11/16 x 2 1/2 x .120 1010 101 | 11/16x2 1/2x.120 flat 1010 1010 | 907 |
|
| IPC | VA | Solid Rivet | Steel | Plain | 11/16 x 2 1/2 | 11/16x2 1/2 rivet countersink head steel | 1,450 |
|
| FastWare | Sask | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Plain | 11/16-16 x 27 | mm a/fx8mm thick bulkhead locknut carbon | 30 |
|
| ASFCORP | MI | Key Stock | Steel | Plain | 11/16 x 3 | 11/16 x 3 ft sq key stk cold roll stl | 2 |
|
| ACCURATE | IL | Flat Washer | Steel | Plain | 11/16 x 3 x 1/8 | flat flat s | 200 |
|
| Jackson | MS | Metal Drill Bits | 11/16 x 3 5/8 | edp #51a144b end mills bit 4 flute | 1 |
| ||
| BoltCraft | NE | Metal Drill Bits | Steel | Black Oxide | 11/16 x 6 | 11/16 x 6 silver & deming drill bit series 201us with 1/2 shank black & gold finish | inquire |
|
| Jackson | MS | Masonry & Concrete Drill Bits | 11/16 x 6 | oal 4 useable sds-plus masonry hammer drill bit 160 pt | 2 |
| ||
| OneMonroe | MN | Wood Drill Bits | Steel | 11/16 x 6 | blu-mol xtreme spade bits (carded) 11/16 x 6 inch | 7 |
| |
| THRDFAST | TN | Wood Drill Bits | 11/16 x 6 1/8 | spade bit | 5 |
| ||
| MidStates | MI | Steel | 11/16 x 6 1/4 | drift (barrel) pin | 10 |
| ||
| Jackson | MS | Reamer Bits | 11/16 x 7 1/8 | bridge reamer spiral series 4250 mt3 | 1 |
| ||
| MidStates | MI | Steel | 11/16 x 7 1/2 | drift (barrel) pin | 4 |
| ||
| Jackson | MS | Masonry & Concrete Drill Bits | 11/16 x 8 | oal 6 useable sds-plus masonry hammer drill bit 160 pt | 3 |
| ||
| HBBOLT | CA | Nails | 11/16 x 8 | nail bomber mag 357dlx | 3 |
| ||
| SRF | AL | Masonry & Concrete Drill Bits | Steel | Plain | 11/16 x 9 x 7 | sds hammer drill | - |
|
| FastWare | Sask | Masonry & Concrete Drill Bits | 11/16 x 10 | useablex12 ol sds masonary bit | 1 |
| ||
| Jackson | MS | Key Stock | Steel | Plain | 11/16 x 12 | square key stock | 7 |
|
| QFC | TX | Metal Drill Bits | 11/16 x 12 | 11/16x12in 1/2 reduced shank 118deg point drill bit | 1 |
| ||
| KBS | TN | Rebar Cutter Bits | Steel | Plain | 11/16 x 12 | 11/16 x 12 rebarcutter rotaryonly!!! | 4 |
|
| HBBOLT | CA | Deformed Bar Anchor Stud, Rebar | Steel | Plain | 11/16 x 12 | rebarcutr strt shnk | 2 |
|
| Endries | WI | U-Bolt | Steel | Plain | 11/16-11 x 12 3/16 | 11/16-11x12 3/16 flat co rten u-bolt a-1768 | 200 |
|
| Jackson | MS | Steel | Plain | 11/16 x 14 | pin drift button head semi cone point (3/4 pitch diameter) | 307 |
| |
| HBBOLT | CA | Metal Drill Bits | 11/16 | hss s & d drill with 1/2 shnk 118pt 29240 29240 | 4 |
| ||
| HBBOLT | CA | Metal Drill Bits | 11/16 | 11/16 wood spade bit bosch dare devil dsb1008 dsb1008 | 3 |
| ||
| Endries | WI | Hairpin Cotter Pin (Bridge Pin, R-Clip) | Steel | Zinc/Clear | 11/16 | 410-x 3/16x2-3/4 hairpin clip trivalent clear zinc 11/16 groove diameter | 1500 |
|
| THRDFAST | FL | Hole Saws | 11/16 | ct7 carbide tipped hole cutter | 1 |
| ||
| NAPPCO | TX | Grommets & Eyelets | Rubber, Buna-N, Neoprene etc. | Plain | 11/16 | 11/16 id rubber grommet 1/16 gr width | 800 |
|
| American | NY | Split Lock Washer | Steel | Plain | 11/16 | splt l/w 15/16 x 1/16 | 400 |
|
| THRDFAST | TN | Reamer Bits | 11/16 | taper reamer | 2 |
| ||
| UNEEDA | NJ | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | 11/16 | internal l/w | 30600 |
|
| ISSCO | MO | Internal Type HO Retaining Ring | Steel | Phosphate | 11/16 | rotor clip internal ho ring ho-68-st-pa | 1325 |
|
| ISSCO | MO | Reamer Bits | Steel | Plain | 11/16 | spiral flute #3 morse taper shank | 6 |
|
| Lippin | CA | External Type SH Retaining Ring | Steel | Plain | 11/16 | 11/16 external retaining ring | 175 |
|
| SRF | AL | Hole Saws | 11/16 | bimetal holesaw | - |
| ||
| SRF | AL | Internal Type HO Retaining Ring | Steel | Plain | 11/16 | internal retaining ring | 23 |
|
| SRF | AL | Tooth Lock Washer (Int. & Ext.) | Steel | Plain | 11/16 | internal tooth l/w | 698 |
|
| SIS | AZ | Steel | 11/16 x 7/8 1/4 | clip 11/16 head x 7/8 long 1/4 hole | 25 |
| ||
| Endries | WI | Metal Drill Bits | Steel | 11/16 | 14510 11/16 t-510 high speed steel taper shank drill bit | 12 |
| |
| Endries | WI | Internal Type HO Retaining Ring | Steel | Phosphate | 11/16 | 11/16 internal retaining ring phos | 250 |
|
| Endries | WI | External Type SH Retaining Ring | Steel | Phosphate | 11/16 | 11/16 external retaining ring phos | 980 |
|
| NutsBolts | NE | Reamer Bits | 11/16 | 11/16 high spiral reamer | 3 |
| ||
| NutsBolts | NE | Hole Saws | 11/16 | 11/16 bi-metal hole saw | 3 |
| ||
| NutsBolts | NE | External Type SH Retaining Ring | Steel | Plain | 11/16 | 11/16 external snap ring | 25 |
|
| NutsBolts | NE | Finished Hex Nut | Steel | Plain | 11/16 | 11/16 hex nut reamer | 1 |
|
| NutsBolts | NE | Sockets | 11/16 | 11/16 deep skt 1/2 drive | 1 |
| ||
| NutsBolts | NE | Sockets | 11/16 | 11/16 socket 3/8 drive | 6 |
| ||
| NutsBolts | NE | Sockets | 11/16 | 11/16 deep socket 3/8 drive | 2 |
| ||
| NutsBolts | NE | Wrenches | 11/16 | 11/16 combination wrench | 4 |
| ||
| NutsBolts | NE | Impact Socket Drivers | 11/16 | 11/16 short impact 3/8 dr | 5 |
| ||
| NutsBolts | NE | Impact Socket Drivers | 11/16 | 11/16 deep impact 3/8 drv | 5 |
| ||
| NutsBolts | NE | Impact Socket Drivers | 11/16 | 11/16 deep impact 1/2 drv | 1 |
| ||
| MidStates | MI | Machine Dies | 11/16-11 | hi-carb adjust die | 4 |
| ||
| Cal Fastenrs | CA | Screwdriving Insert Bits & Power Bits | 11/16 | drill bit with 1/2 shank jobber length | 14 |
| ||
| Cal Fastenrs | CA | Snap Bushings, Strain Relief Bushings | Plain | 11/16 | 11/16 heyco snap bushing black 7/8 mntg hole /HEYCO2126 | 108 |
| |
| Cal Fastenrs | CA | Electrical Lugs & Terminals | Aluminum | Plain | 11/16 | expansion plug #5790-139 | 14,500 |
|
| Jackson | MS | Shaft Collars, & Adjusting Rings | Steel | Zinc/Clear | 11/16 | set collar | 15 |
|
| Jackson | MS | External Type SH Retaining Ring | Steel | Plain | 11/16 | external snap ring finish | 184 |
|
| Jackson | MS | External Type SH Retaining Ring | Steel | Plain | 11/16 | internal snap ring finish | 162 |
|
| Delta | TX | External Type SH Retaining Ring | Steel | Plain | 11/16 | snap ring cs 11/16 external | 114 |
|
| All Size | TX | Hole Saws | 11/16 | 11/16 ct-7 carbide tipped hole saw | 9 |
| ||
| All Size | TX | Internal Type HO Retaining Ring | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 11/16 | 11/16 internal retaining ring s/s | 100 |
|
| Cal Fastenrs | CA | Expansion Plugs | Steel | Plain | 11/16 | 11/16 steel expansion plug #hp-687-s-62 plain stee hp-687-s-62 | hp-687-s-62 | hp-687-s-62 | 17,682 |
|
| American | OH | External Spiral Retaining Ring | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 11/16 | 11/16 ext light duty spirol ring stainless | 10,000 |
|
| QFC | TX | Beveled Washer (Round & Square) | Steel | Plain | 11/16 | beveled washer (bw)11/16 hole mcmaster carr 91152a035 b18.23.1 b18.2.6 | 63 |
|
| FastWare | Sask | Hole Saws | 11/16 | holesaw bi-metal variable pitch | 1 |
| ||
| Mansco | MI | Steel | 11/16 | retaining ring | 2000 |
| ||
| ASFCORP | MI | Hand Taps | 11/16-16 | 11/16-16 hss taper hand tap | 1 |
| ||
| American | OH | External Type C Retaining Ring (C-Clip) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 11/16 | 11/16 ext crescent ring ph 15-7 stainless | 30,000 |
|
| UNEEDA | NJ | External Type SH Retaining Ring | Steel | Plain | 11/16 | 11/16 external retaining ring | 3000 |
|
| Komar | IL | Hex Jam Nut | Steel | Zinc/Yellow | 11/16-20 | 11/16-20 hex fin jam nut(15/16x5/16) zinc yellow | 50000 |
|
| Komar | IL | Split Lock Washer | Steel | Zinc/Yellow | 11/16 | 11/16 split lock -.700x1.040x.100 zinc yellow | 178300 |
|
| Komar | IL | Split Lock Washer | Steel | Chrome Plated | 11/16 | 11/16 split lock -.700x1.040x.100 chrome | 800 |
|
| FastWare | Sask | Wood Drill Bits | 11/16 | ultrabore spade bit | 15 |
| ||
| KBS | TN | Reamer Bits | 11/16 | 11/16 construction taper reamer | 4 |
| ||
| FasSpcMfg | FL | Socket Head Cap Screw | null | Plain | 11/16 | 1/4-blank x 3 11/16 soc cap blanks alloy | 103 |
|
| Liberty | IL | Hose Clamp | Steel | Plain | 11/16-1 1/4 | ms35842-11 clamp | 7 |
|
| Liberty | IL | Hex Jam Nut | Grade 5 | Zinc/Yellow | 11/16-18 | special hex jam nut 15/16 a.f.x3/8 thk | 600 |
|
| Liberty | IL | Panel Nut | Steel | Zinc/Clear | 11/16 | panel nut 1 af plate plate | 248 |
|
| HBBOLT | CA | Hole Saws | 11/16 | hole saw | 3 |
| ||
| HBBOLT | CA | Impact Socket Drivers | 11/16 | impact socket std 1/2 dr | 3 |
| ||
| HBBOLT | CA | Impact Socket Drivers | 11/16 | impact socket deep 1/2 dr | 4 |
| ||
| HBBOLT | CA | Wood Drill Bits | Steel | 11/16 | wood spade bit | 2 |
| |
| IPC | VA | External Type SH Retaining Ring | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 11/16 | 11/16 external retaining ring 18-8 304 | 3,714 |
|
| IPC | VA | Metal Drill Bits | 11/16 | 11/16 drill bit reduced shank | 16 |
| ||
| IPC | VA | Wrenches | 11/16 | 11/16 combination wrench (stanley mechanics) | 3 |
| ||
| IPC | VA | Internal Type HO Retaining Ring | Steel | Phosphate | 11/16 | 11/16 internal retaining ring phosphate | 10 |
|
| IPC | VA | Metal Drill Bits | 11/16 | 11/16 carb tip ts drill bit | 3 |
| ||
| Endries | WI | Flat Washer | Steel | Galvanized | 11/16 x 1 3/4 x .134 | 5/8 standard flat washer hot dip galvanized 11/16x1-3/4x.134 | 997 |
|
| A-Plus Co | OR | Internal Type HO Retaining Ring | Plain | 11/16 | 11/16 retaining ring internal | 25 |
| |
| MESAFAST | CA | Metal Drill Bits | Steel | Black Oxide | 11/16 | 11/16 (12 red. shank) s&d drill hd black & gold | 3.0 |
|
| MidStates | MI | Internal Type HO Retaining Ring | Steel | Zinc/Clear | 11/16ba | 11/16 balanced lug ret ring-internal znc | 14 |
|
| MidStates | MI | Machine Taps | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 11/16-11 | 11/16-11 bottom tap h.s.s. | 3 |
| |
| Endries | WI | U-Bolt | Steel | Plain | 11/16-11x4 11/16 flat co rten u-bolt e-co a-1759 | 1029 |
| |
| Endries | WI | External Type SH Retaining Ring | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5100-68h 11/16 stainless steel external retaining ring waldes | 500 |
| |
| API | IA | Finished Hex Nut | Steel | Plain | 11/16-16 | bulkhead nut un-2b | 3045 |
|
| Endries | WI | Shoulder Washer (Screw Insulator) | Nylon (Polyamide) | Plain | 11/16 | shoulder washer 11/16 nylon 1 long | 1843 |
|
| FACCA | Ont | Cushioned Pipe & Tube Loop Clamp | Steel | Galvanized | 11/16 | half clip cushioned 11/16 clamp dia 9/32 hole dia .812 c to c steel hot dipped galvanized black vinyl cushion | 85,710 |
|
| MMCC | IL | Wrenches | Steel | Chrome Plated | 11/16 x 7/8bs | 11/16x7/8bs dbl open end wrench 73110 chrome vanadium steel | inquire |
|
| IndexFast | CA | Hose Clamp | Steel | Zinc/Clear | 11/16 | 18443 crimp type hose clamp steel/zinc | inquire |
|
| IndexFast | CA | Hose Clamp | Steel | Plain | 11/16 | 12688 spring action hose clamps hose o.d. .655 max. diameter 5/16 width steel/red p | inquire |
|
| MetricThrd | CA | External Type SH Retaining Ring | Steel | Phosphate | 11/16 | 11/16 st/phos ext-retaining rings | 1,500 |
|
| NAPPCO | TX | Hose Clamp | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 11/16 | hose clamp s/s 11/16 to 1-1/2 dia. | 105 |
|
| Endries | WI | Wrenches | 11/16 | 11/16 12pt combination wrench | 6 |
| ||
| MidStates | MI | Machine Dies | 11/16-16 | hex rethreading die | 3 |
| ||
| OSSCO | RI | Internal Type HO Retaining Ring | Steel | Plain | 11/16 | 11/16 internal retaining ring | 68 |
|
| OSSCO | RI | External Type SH Retaining Ring | Steel | Plain | 11/16 | 11/16 external retaining ring | 680 |
|
| MSTC | MA | Machine Taps | 11/16-14bsf | 11/16-14bsf hss british std fine tap | 1 |
| ||
| Brikksen | FL | Cable Clamps & Ties | Nylon (Polyamide) | 11/16 | 11/16 cable clamp nat nylon 22cc50d0687 | inquire |
| |
| Brikksen | FL | Cable Clamps & Ties | Nylon (Polyamide) | 11/16 | 11/16 cable clamp nat nylon 22cc50d0687 | inquire |
| |
| Brikksen | FL | Cable Clamps & Ties | Nylon (Polyamide) | 11/16 | 11/16 cable clamp nat nylon 22cc50d0687 | inquire |
| |
| Olander | CA | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 11/16-11 | 8911-11cn688 11/16-11 f/r ovsz heli-coil ins sst () () | 20 |
|
| Alma Bolt | MI | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | 11/16 | 11/16 zinc plated internal star washer | 3500 |
|
| Brikksen | FL | Cable Clamps & Ties | Nylon (Polyamide) | Plain | 11/16 | 11/16 cable clamp black nylon | inquire |
|
| Komar | IL | Split Lock Washer | Steel | Zinc/Yellow | 11/16 | 11/16 split lock -.700x1.040x.100 zinc yellow |
| |
| Alma Bolt | MI | Machine Dies | Steel | 11/16-11 | 11/16-11 round adjustable die hss | 2 |
| |
| THRDFAST | FL | Hole Saws | 11/16 | hss bi-metal hole saw | 2 |
| ||
| National | Ont | External Type SH Retaining Ring | Steel | Plain | 11/16 | 11/16 ext ret ring 3100 series s roh s | 6980 |
|
| Olander | CA | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Steel | Zinc/Clear | 11/16-11 f/r heli-coil ins rohs | 40 |
| |
| Century | FL | Barbed Fittings | 11/16 | 3812d nozzle fitting 11/16 un x barb straight | 55 |
| ||
| OneMonroe | MN | Wrenches | 11/16-3/4 | proferred combination wrench set14 piece set sae (14 pcs) 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1 1/16 1 1/8 1 1/4 | 1 |
| ||
| Brikksen | FL | Cable Clamps & Ties | Nylon (Polyamide) | Plain | 11/16 | 11/16 cable clamp black nylon | inquire |
|
| American | WI | Flat Washer | Steel | Zinc/Clear | 11/16 x 3 x 3/8 | 11/16 id x 3 od x 3/8 thk flat washer zinc | 95 |
|
| OneMonroe | MN | Metal Drill Bits | Steel | 11/16 | 11/16 colbalt s & d drill (1/2 shank) | 1 |
| |
| AFT Faste | TX | Hole Saws | 11/16 | 11/16 ct7 carbide tipped hole cutter 1 depth | 9 |
| ||
| HYBROCO | MI | Hog Ring (Shoat Ring) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 11/16 | 11/16 hog ring ss sr8 hand 2500/bx | 50 |
|
| OneMonroe | MN | Reamer Bits | Steel | 11/16 | 11/16 blitz structural reamer hex shank lh helix hss reg | 1 |
| |
| Brikksen | FL | Cable Clamps & Ties | Nylon (Polyamide) | 11/16 | 11/16 cable clamp nat nylon 22cc50d0687 | inquire |
| |
| American | WI | Cable Clamps & Ties | Plastic | Plain | 11/16 | 11/16 clamp diameter med duty tube clamp black vinyl coated w/.406 hole (#cov-1213z1) | 138 |
|
| OneMonroe | MN | Annular Cutters | Steel | 11/16 | 11/16 2 depth of cut annular cutter | 2 |
| |
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
