FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| MAINSOURC | NH | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | Black Oxide | 1/8 | 1/8 hex key short arm stl blk | 1900 |
|
| MAINSOURC | NH | Hand Taps | vt tap 6-32 hand tap plug | 4 |
| |||
| MAINSOURC | NH | Hand Taps | vermont tap 5/16-18 hand tap taper | 2 |
| |||
| MAINSOURC | NH | Hand Taps | vt tap 5/16-18 hand tap plug | 9 |
| |||
| MAINSOURC | NH | Hand Taps | vt tap 5/16-24 hand tap plug | 3 |
| |||
| MAINSOURC | NH | Hand Taps | vt tap 4-40 hand tap plug | 6 |
| |||
| MAINSOURC | NH | Hand Taps | vt tap 3/8-16 hand tap plug | 6 |
| |||
| MAINSOURC | NH | Hand Taps | vt tap 3/8-16 hand tap bottom | 6 |
| |||
| MAINSOURC | NH | Hand Taps | vt tap 1/4-20 hand tap plug | 4 |
| |||
| MAINSOURC | NH | Hand Taps | vt tap 1/2-13 hand tap plug | 6 |
| |||
| MAINSOURC | NH | Knives, Razors, Multifunction Tools | tool knife utility auto load | 4 |
| |||
| MAINSOURC | NH | Service & Repair Kits | 11 | teledyne r6a56 kit # 11 | 4893 |
| ||
| MAINSOURC | NH | Service & Repair Kits | 10 | teledyne r6a14s kit # 10 | 2454 |
| ||
| MAINSOURC | NH | Service & Repair Kits | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 7 | teledyne cm4tna250f red kit # 7 | 6594 |
| |
| MAINSOURC | NH | Service & Repair Kits | Plastic | Plain | 105 x 24 | pvc 105 black 24 kit # 36 | 1682 |
|
| MAINSOURC | NH | Service & Repair Kits | Plastic | Plain | 39 | micro plastics 29r101s050b kit # 39 | 425 |
|
| MAINSOURC | NH | Service & Repair Kits | install kit 98-9001-001 | 25 |
| |||
| MAINSOURC | NH | Service & Repair Kits | 9 | hoffman fvl2216-5r2 kit # 9 | 8080 |
| ||
| MAINSOURC | NH | Service & Repair Kits | granite 101748 kit | 24 |
| |||
| MAINSOURC | NH | Service & Repair Kits | ferrishield kit | 2 |
| |||
| TownCountry | AR | L-Wrenches, Allen Wrenches & Torx Wrenches | 7/32 | 7/32 hex key / allen wrench | 10 |
| ||
| TownCountry | AR | Hand Taps | 5/16-18 | 5/16-18 hss hand tap taper | 12 |
| ||
| Jackson | MS | Bolt & Screw Extractors | Steel | #6 3/4 | #6 3/4 pipe or 1-1-1/8 bolt use 15/32 bit screw extractor straight flute | 2 |
| |
| Jackson | MS | Measuring Tools | Steel | Zinc/Black | 5/16 | 5/16 uss flat washer black zinc 3/8 id x 7/8 od 14 gauge 87/lb | 3002 |
|
| Jackson | MS | Measuring Tools | Steel | Black Oxide | 1/4 | 1/4 uss flat washer 5/16 id x 3/4 od 16 gauge 149/lb black oxide | 2761 |
|
| Jackson | MS | Knives, Razors, Multifunction Tools | utility knife 6 proferred retractable with easy load blade holder | 4 |
| |||
| Jackson | MS | L-Wrenches, Allen Wrenches & Torx Wrenches | hex key set long arm metric 9 pc. ball end 1.5-10.00 mm eklind #13609 | 3 |
| |||
| Jackson | MS | L-Wrenches, Allen Wrenches & Torx Wrenches | M22 | 22 mm metric hex key short arm | 2 |
| ||
| Jackson | MS | L-Wrenches, Allen Wrenches & Torx Wrenches | M8 | 8 mm metric hex key short arm | 50 |
| ||
| Jackson | MS | L-Wrenches, Allen Wrenches & Torx Wrenches | M5 | 5 mm metric hex key short arm | 10 |
| ||
| Jackson | MS | L-Wrenches, Allen Wrenches & Torx Wrenches | M2.5 | 2.5 mm metric hex key long arm | 500 |
| ||
| Jackson | MS | L-Wrenches, Allen Wrenches & Torx Wrenches | M19 | 19 mm metric hex key long arm | 9 |
| ||
| Jackson | MS | L-Wrenches, Allen Wrenches & Torx Wrenches | M17 | 17 mm metric hex key long arm | 3 |
| ||
| Jackson | MS | L-Wrenches, Allen Wrenches & Torx Wrenches | M14 | 14 mm metric hex key long arm | 24 |
| ||
| Jackson | MS | L-Wrenches, Allen Wrenches & Torx Wrenches | M11 | 11 mm metric hex key long arm | 4 |
| ||
| Jackson | MS | L-Wrenches, Allen Wrenches & Torx Wrenches | M10 | 10 mm metric hex key long arm | 83 |
| ||
| Jackson | MS | L-Wrenches, Allen Wrenches & Torx Wrenches | M7 | 7 mm metric hex key long arm | 64 |
| ||
| Jackson | MS | L-Wrenches, Allen Wrenches & Torx Wrenches | M5 | 5 mm metric hex key long arm | 32 |
| ||
| Jackson | MS | L-Wrenches, Allen Wrenches & Torx Wrenches | 3/8 | 3/8 hex key ball driver (bondhus part# 10914) | 19 |
| ||
| Jackson | MS | L-Wrenches, Allen Wrenches & Torx Wrenches | 5/16 | 5/16 hex key ball driver (bondhus part# 10913) | 8 |
| ||
| Jackson | MS | L-Wrenches, Allen Wrenches & Torx Wrenches | 3/16 | 3/16 hex key ball driver (bondhus part# 10910) | 17 |
| ||
| Jackson | MS | L-Wrenches, Allen Wrenches & Torx Wrenches | 5/32 | 5/32 hex key ball driver | 28 |
| ||
| TownCountry | AR | Wrenches | 1/2 | 1/2 combination wrench | 6 |
| ||
| TownCountry | AR | Service & Repair Kits | Plastic | Plain | plastic cutlery kit 250/cs (knife fork spoon napkin salt & pepper) | 2 |
| |
| Jackson | MS | Scissors, Snips, and Shears | 10 | straight aviation snips drop forged meets ansi/asme b7.16-1998 coo tiawan | 2 |
| ||
| Jackson | MS | Pliers | 6 | 6 taper grip proferred diagonal cutting pliers | 1 |
| ||
| Jackson | MS | Measuring Tools | Plastic | Plain | bolt gauge plastic | 240 |
| |
| Jackson | MS | Installation & Setting Tools | undercut tool for 1-1/4 anchors rental | 1 |
| |||
| Jackson | MS | Pliers | 8 | slip joint pliers serrated jaws proferred series | 2 |
| ||
| Jackson | MS | Sockets | Plastic | Plain | 3/8 | drive 37 piece master socket set in hard plastic case | 1 |
|
| Jackson | MS | Measuring Tools | 4-80 | tpi pocket knife style standard american thread pitch gauge | 1 |
| ||
| Jackson | MS | Measuring Tools | sae 4-62 and .25-6.00 mm pocket knife style thread pitch gauge | 1 |
| |||
| Jackson | MS | Pliers | 7 | taper grip proferred side cutting long nose pliers with cutter | 1 |
| ||
| Jackson | MS | Measuring Tools | #ltp4 lateral tie plate simpson strong tie 20 gauge 3x4.25 | 10 |
| |||
| Jackson | MS | Installation & Setting Tools | Steel | Zinc/Clear | 3/8 | shorty drop in anchor setting tool | 10 |
|
| Jackson | MS | Chisels & Punches | Steel | Galvanized | 1/2 | domed cup grating special washer for c/b applications with rectangle hole punched hot dip | 200 |
|
| Jackson | MS | Hacksaws | 1/2 x 12 | t bi-metal hand hacksaw blade | 26 |
| ||
| Jackson | MS | Sockets | 1 | 1 dr. socket retaining ring drive 2.01-2.05 grey pneumatic #4110 or equal | 4 |
| ||
| Jackson | MS | Sockets | 1 | 1 drivex7/8 impact socket 8 point also for square drive applications (gray pneumatic #4528s) | 2 |
| ||
| Jackson | MS | Sockets | 3/4 | dr. socket retaining ring drive 1.50 or 38mm grey pneumatic #3110 or equal | 4 |
| ||
| Jackson | MS | Sockets | Steel | 3/4 | drivex1-7/16 impact socket 6 point grey pneumatic # 3046r or equal | 3 |
| |
| Jackson | MS | Wrenches | proferred hand held pop rivet gun riveter hr-704 hand operated rivet tool service wrench & locking tab luded | 4 |
| |||
| Jackson | MS | L-Wrenches, Allen Wrenches & Torx Wrenches | 7/64 | 7/64 hex key ball driver | 36 |
| ||
| Jackson | MS | L-Wrenches, Allen Wrenches & Torx Wrenches | 3/32 | 3/32 hex key ball driver (bondhus part# 10905) | 40 |
| ||
| NutsBolts | NE | Chisels & Punches | 5/16 | 5/16 center punch 5/32 pt |
| |||
| NutsBolts | NE | Measuring Tools | Steel | 0-4 | fowler steel dial caliper 0-4 |
| ||
| NutsBolts | NE | Measuring Tools | Steel | 0-12 | fowler steel dial caliper 0-12 |
| ||
| NutsBolts | NE | Measuring Tools | Steel | 0-8 | fowler steel dial caliper 0-8 |
| ||
| NutsBolts | NE | Chisels & Punches | 3 x 11 | mayhew 3 x 11 floor chisel |
| |||
| NutsBolts | NE | Wrenches | M7 | 7 pc ratcheting metric wrench set |
| |||
| NutsBolts | NE | Measuring Tools | 3 | 3 pocket caliper |
| |||
| NutsBolts | NE | Measuring Tools | 4 | 4 slide caliper |
| |||
| NutsBolts | NE | Pliers | 11 | 11 pc snap ring pliers set |
| |||
| NutsBolts | NE | Hammers & Mallets | 24 | 24oz hammer w/replacement heads |
| |||
| NutsBolts | NE | Hammers & Mallets | 44 | 44oz hammer w/replacement heads |
| |||
| NutsBolts | NE | Pliers | brake line pliers |
| ||||
| NutsBolts | NE | Service & Repair Kits | lincoln 20v powerlube kit |
| ||||
| NutsBolts | NE | Wrenches | 11 | 11sp vise grip 11 c-clamp w/swivel pads |
| |||
| NutsBolts | NE | Hand Reamers | 9/16 | 9/16 hand reamer |
| |||
| NutsBolts | NE | Wrenches | 9 | 9 vise grip locking c-clamp #9dr |
| |||
| NutsBolts | NE | Measuring Tools | 6 | 6 dial caliper |
| |||
| NutsBolts | NE | Screwdrivers | #2 | #2 phillips demo screwdriver |
| |||
| NutsBolts | NE | Screwdrivers | #3 | #3 phillips demo screwdriver |
| |||
| NutsBolts | NE | Sockets | 1/4 | 3 pc 1/4 hex socket adapter 1/4-3/8-1/2 drive |
| |||
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
