FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Global | CA | 105-2202-201 red vertical test jack 0.188 od x 0.437 l | 98 |
| ||||
| Global | CA | 12-6-1 medium retainer ss 0.62 od x 0.15 th x 0.185 id | 1,794 |
| ||||
| Global | L-Wrenches, Allen Wrenches & Torx Wrenches | M6 | 16068 bondhus 6 mm ball wrench proguard | 25 |
| |||
| Global | L-Wrenches, Allen Wrenches & Torx Wrenches | M4.0 | 16060 bondhus 4.0 mm ball wrench proguard | 30 |
| |||
| Global | O-Rings & Quad Ring Seals (X-Rings) | Plain | 2-367 | 2-367 v0747-75 parker seal o-ring blk-fluor | 194 |
| ||
| Global | CA | tp-103-02 printed circuit test point 0.094 d x 0.350 h | 18,000 |
| ||||
| Global | Hex Head Cap Screw | Nylon (Polyamide) | Plain | 1/2-13 x 5 | 1/2-13 x 5 hex cap screw nylon | 150 |
| |
| Cal Fastenrs | CA | Carriage Bolt | Steel | Zinc/Clear | 5/16-18 x 1 1/2 | c/b Cr3+ | 191 |
|
| Cal Fastenrs | CA | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | 568-112 1/2 x 3/32 | 568-112 1/2 id x 3/32 thick o-ring buna 70 | 1,375 |
| |
| Cal Fastenrs | CA | Flat Washer | Plastic | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | .376 x .625 x .015 | flat teflon | 4,200 |
|
| Cal Fastenrs | CA | Panel Nut | Steel | Zinc/Clear | #10-32 | u-nut .60 - .70 panel range | 2,300 |
|
| Cal Fastenrs | CA | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | .143 x .267 x .032 | s.s f/w see nas620-c6 | 450 |
|
| Cal Fastenrs | CA | Carriage Bolt | Steel | Zinc/Clear | 1/4-20 x 1 1/4 | c/b Cr3+ | 150 |
|
| Cal Fastenrs | CA | Machine Screw | Grade 5 | Zinc/Clear | 1/4-20 x 5/8 | unslotted hwh m/s w/ serrations -trivalant | 6,800 |
|
| Cal Fastenrs | CA | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 5/16-18 x 1 1/2 | hex c/s , cr3 | 2,139 |
|
| Cal Fastenrs | CA | Fender Washer | Steel | Zinc/Clear | 3/8 x 1 1/2 | fender - Cr3+ | 340 |
|
| AIH | AZ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 1/4 | phil flat m/s s/s w/locking patch | 247 |
|
| AIH | AZ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-32 x 3/8 | phil flat m/s s/s w/locking patch | 40 |
|
| AIH | AZ | High Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M2.5 | thin nut a2 s/s | 7500 |
|
| AIH | AZ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | M1.6-0.35 x 10 | pan phil s/s | 8798 |
|
| AIH | AZ | Weld Nut | 316, 317, A4 Stainless | Plain | M4 | hex weld nut a4 s/s | 893 |
|
| AIH | AZ | Machine Screw | Steel | Zinc/Clear | M3.5-0.60 x 6 | phil flat | 64083 |
|
| AIH | AZ | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3-0.50 x 25 | socket c/s s/s | 1055 |
|
| AIH | AZ | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3-0.50 x 16 | socket c/s s/s | 5800 |
|
| AIH | AZ | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3-0.50 x 6 | socket c/s s/s | 8853 |
|
| AIH | AZ | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3-0.50 x 6 | button soc c/s s/s | 2532 |
|
| AIH | AZ | Sems Machine Screw | Steel | Zinc/Clear | M3 x 6 | phil pan sqdm/sqcn sems | 1130 |
|
| AIH | AZ | Button Head Socket Cap Screw | Steel | Zinc/Clear | M4-0.70 x 6 | button soc cap | 1382 |
|
| AIH | AZ | Flat Washer | Brass | Plain | M4 | flat | 14053 |
|
| AIH | AZ | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M5-0.80 x 12 | flat soc c/s s/s | 4955 |
|
| AIH | AZ | Socket Head Cap Screw | Class 12.9 | Plain | M6-1.00 x 18 | socket c/s 12.9 | 1000 |
|
| AIH | AZ | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain | M6-1.00 x 25 | socket c/s a4-70 s/s | 4106 |
|
| AIH | AZ | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M8-1.25 x 22 | socket c/s s/s | 150 |
|
| AIH | AZ | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | M4 x 6 | m4 x 6 pan head torx stl t/f/s zinc | 19000 |
|
| GUIDON | TX | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1.016 ID x 1 3/4 OD x 3/32 | COMMERCIAL AN960-C1616 | 2,016 |
|
| GUIDON | NJ | Flat Washer | Brass | Plain | #4 x .281 OD x .025 THK | 2,000 |
| |
| GUIDON | NJ | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #8 x 3/8 | slotted indented hex washer head type-a | 3,580 |
|
| GUIDON | TX | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #8 x 3/8 | slotted indented hex washer head type-a | 8,000 |
|
| GUIDON | NJ | Flat Washer | Brass | Nickel Plated | 1/4 ID x 11/16 OD x .051 | 1/4 L | 2,150 |
|
| GUIDON | NJ | Flat Washer | Brass | Plain | .228 ID x .562 OD x .040 THK | 12 L | 48 |
|
| GUIDON | NJ | Flat Washer | Brass | Plain | 1 1/2 ID x 3 1/2 OD x .156 THK | 3 |
| |
| GUIDON | NJ | Flat Washer | Brass | Plain | .281 ID x 3/4 OD x .062 THK | 16 L | 1,056 |
|
| GUIDON | NJ | Beveled Washer (Round & Square) | Steel | Plain | 3/4 | SQUARE BEVELED | 250 |
|
| GUIDON | NJ | Beveled Washer (Round & Square) | Steel | Plain | 7/8 | SQUARE BEVELED | 90 |
|
| GUIDON | TX | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | 3,000 | EXTERNAL TOOTH COUNTERSUNK | 3,000 |
|
| GUIDON | NJ | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | #4 | EXTERNAL TOOTH | 30,735 |
|
| GUIDON | NJ | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | #5 | EXTERNAL TOOTH | 250 |
|
| GUIDON | TX | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | #6 | EXTERNAL TOOTH COUNTERSUNK | 9,000 |
|
| GUIDON | TX | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | %236 | EXTERNAL TOOTH | 20,000 |
|
| GUIDON | TX | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | #8 | EXTERNAL TOOTH COUNTERSUNK | 1,000 |
|
| GUIDON | TX | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | #10 | EXTERNAL TOOTH COUNTERSUNK | 2,700 |
|
| GUIDON | NJ | Tooth Lock Washer (Int. & Ext.) | Phosphor Bronze | Plain | #8 | EXTERNAL TOOTH | 5,030 |
|
| GUIDON | NJ | Tooth Lock Washer (Int. & Ext.) | Phosphor Bronze | Plain | #10 | EXTERNAL TOOTH | 1,100 |
|
| GUIDON | TX | Tooth Lock Washer (Int. & Ext.) | Steel | Zinc/Clear | 1/4 | EXTERNAL TOOTH COUNTERSUNK | 4,000 |
|
| MESAFAST | CA | Button Head Socket Cap Screw | Steel | Zinc/Clear | M6-1.00 x 30 | button socket c/s & bake | 400.0 |
|
| MESAFAST | CA | Flat Head Socket Cap Screw | Steel | Zinc/Black | M4-0.70 x 10 | flat socket c/s black | 5,000.0 |
|
| MESAFAST | CA | Flat Head Socket Cap Screw | Steel | Zinc/Clear | 1/2-13 x 3 1/2 | flat socket c/s & bake | 20.0 |
|
| MESAFAST | CA | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #4 x 1 | phil pan type-a | 700.0 |
|
| MESAFAST | CA | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Zinc/Clear | #10 x 1 | #10x1 phil indented hwh twinfast type-a | 580.0 |
|
| MESAFAST | CA | Self-Tapping Screw w/ Neo Bonded Washer (Roofing/Siding/Pole Barn Screw) | Steel | Zinc/Clear | #14-14 x 1 1/2 | hwh self-drilling w/neo sealing washer | 200.0 |
|
| MESAFAST | CA | Self-Tapping Self-Piercing Screw | Steel | Zinc/Clear | #10 x 3 | slotted hwh self-pierce pt (5/16af) | 1,200.0 |
|
| MESAFAST | CA | Metal Drill Bits | 3/16 | 3/16 heavy duty jobber length black and gold drillco brand | 6.0 |
| ||
| MESAFAST | CA | Lag Screw | Steel | Zinc/Clear | 3/8-7 x 4 1/2 | 3/8-7x4-1/2 hex lag | 19.0 |
|
| MESAFAST | CA | Slotted Round Nut (Shaft Nut) | Steel | Zinc/Black | 1/4-20 | 1/4-20 spanner nut diecast zinc black oxide | 6.0 |
|
| MESAFAST | CA | Finished Hex Nut | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 1/4-20 | 1/4-20 finished hex nut 410 stainless | 850.0 |
|
| MESAFAST | CA | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #8-15 x 3/4 | #8-15x3/4 square pan tapping type-a 18-8 s/s | 1,200.0 |
|
| MESAFAST | CA | Self-Tapping Thread Cutting Screw (types f,1,23,25) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | #10-24 x 5/8 | 10-24x5/8 phil flat undercut tcs type-f 410 stainless | 200.0 |
|
| MESAFAST | CA | Dowel Pin | Steel | Plain | M6 x 36 | M6x36 dowel pin alloy hardened din 6325 | 68.0 |
|
| MESAFAST | CA | Hex Head Cap Screw | Grade 2 | Galvanized | 1/4-20 x 1 | 1/4-20x1 hex cap screw gr2 steel hot dip galvanized | 85.0 |
|
| MESAFAST | CA | Cabinet Screw (Particle Board Screw, MDF Screw) | Steel | Zinc/Yellow | #8 x 1 1/4 | #8x1-1/4 torx flat particle board type-17 w/nibs steel yellow zinc t-20 drive (184/#) | 10.0 |
|
| MESAFAST | CA | Cabinet Screw (Particle Board Screw, MDF Screw) | Steel | Zinc/Yellow | #8 x 1 3/4 | #8x1-3/4 6-lobe flat particle board type-17 steel yellow zinc t-20 drive (143/#) | 5.0 |
|
| MESAFAST | CA | Hex Head Cap Screw | Grade 2 | Galvanized | 3/4-10 x 2 3/4 | 3/4-10x2-3/4 hex cap screw gr2 steel hot dip galvanized | 46.0 |
|
| MESAFAST | CA | Cabinet Screw (Particle Board Screw, MDF Screw) | Steel | Zinc/Yello w | #9 x 3 | #9x3 6-lobe flat particle board type-17 t-20 steel yellow zinc (72/#) | 4.0 |
|
| MESAFAST | CA | Hex Head Cap Screw | Grade 2 | Zinc/Clear | 1/2-13 x 9 | 1/2-13x9 hex cap screw gr2 steel zinc | 20.0 |
|
| AIH | AZ | Magnets | M1177/15-01c037 magnet wire 37 awg | 164 |
| |||
| AIH | AZ | Electrical Wires & Cables | M22759/11-24-4 lead wire 24awg | 120000 |
| |||
| AIH | AZ | Springs (Extension) | M12133/1-8 | 12 |
| |||
| AIH | AZ | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3 x 8 | s/s | 2665 |
|
| AIH | AZ | efte wire M22759/33-24-4 | 195840 |
| ||||
| AIH | AZ | etfe wire M22759/33-24-0 | 132000 |
| ||||
| AIH | AZ | insulation sleeving polyolefin M23053/5-107-9 | 2208 |
| ||||
| AIH | AZ | Steel | Nickel Plated | M27500-20RE2N06 | 18000 |
| ||
| AIH | AZ | Electrical Lugs & Terminals | M55155/12XI08 | 93 |
| |||
| AIH | AZ | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M5-0.80 x 5 | button sockets s/s | 402 |
|
| AIH | AZ | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Steel | Plain | 5/16-18 x 5/8 | insert s/s MS122162 | 848 |
|
| AIH | AZ | Dowel Pin | 400 Stainless (405, 410,416,420,430 etc.) | Passivated | 3/32 x 5/8 | pin s/s 410ss MS16555-621 | 33 |
|
| AIH | AZ | Coiled Pin (Spiral Spring Pin) | Steel | Plain | 5/64 x 1/2 | 5/64 x 1/2 pin slotted s/s MS16562-203 | 35 |
|
| AIH | AZ | Dowel Pin | 400 Stainless (405, 410,416,420,430 etc.) | Passivated | 3/16 x 5/8 | 3/16 x 5/8 s/s 410ss MS16555-640 | 2616 |
|
| AIH | AZ | Knobs & Star Grips | Chromate Conversion (Iridite, Alodine) | spring handle alum alodine treated s/s bail MS18012-3 | 104 |
| ||
| AIH | AZ | O-Rings & Quad Ring Seals (X-Rings) | M83248/1-909 | 19 |
| |||
| AIH | AZ | Solid Rivet | Aluminum | Plain | Rivet Aluminum Gold Chem Film MS20426A2-5.5 | 1202 |
| |
| AIH | AZ | Solid Rivet | Steel | Plain | 5/32 x 3/8 | 5/32 x 3/8 rivet solid universal head s/s pass MS20613-5C6 | 121 |
|
| AIH | AZ | Plate Nut (Nutplate, Floating Anchor Nut) | Steel | Plain | #10-32 | self-locking nutplate w/dry film lube MS21073L3 | 30 |
|
| AIH | AZ | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M8-1.25 x 25 | flat soc c/s s/s | 174 |
|
| MESAFAST | CA | Metal Drill Bits | 9/64 | 9/64 heavy duty jobber length black and gold drillco brand | 48.0 |
| ||
| MESAFAST | CA | Concrete/Masonry Screw (Tapcon, Titen etc.) | Steel | Zinc/Clear | 1/2 x 12 | 1/2x12 hwh titen threaded anchor steel zinc | 10.0 |
|
| MESAFAST | CA | Hex Head Cap Screw | Grade 2 | Galvanized | 5/8-11 x 2 | 5/8-11x2 hex cap screw gr2 steel hot dip galvanized | 20.0 |
|
| MESAFAST | CA | Heavy Hex Nut | Grade 2H | Galvanized | 1 1/2-6 | 1 1/2-6 2h heavy hex nut a194 steel hot dip galvanized | 200.0 |
|
| MESAFAST | CA | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Galvanized | 1-8 x 4 1/2 | 1-8x4-1/2 heavy hex bolt a325 type-1 hdg usa | 110.0 |
|
| MESAFAST | CA | Round Malleable Washer (Timber Washer) | Iron | Galvanized | 1 1/8 | 1-1/8 square malleable bevel steel cast iron galvanized | 10.0 |
|
| MESAFAST | CA | F436 Round Structural Washer | Steel | Galvanized | 1 1/8 | 1-1/8 sae f436 flat hardened steel hot dip galvanized | 21.0 |
|
| MESAFAST | CA | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Galvanized | 1 1/8-7 x 3 3/4 | 1 1/8-7x3-3/4 heavy hex bolt a325 steel hot dip galvanized | 21.0 |
|
| MESAFAST | CA | Heavy Hex Nut | Grade 2H | Galvanized | 1 1/8-7 | 1 1/8-7 2h a194 2h heavy hex nut steel hot dip galvanized | 19.0 |
|
| MESAFAST | CA | Cabinet Screw (Particle Board Screw, MDF Screw) | Steel | Zinc/Yellow | #9 x 3 | #9x3 6-lobe flat particle board type-17 t-20 steel yellow zinc | 5,415.0 |
|
| MESAFAST | CA | Cabinet Screw (Particle Board Screw, MDF Screw) | Steel | Zinc/Yellow | #8 x 1 3/4 | #8x1-3/4 6-lobe flat particle board type-17 steel yellow zinc t-20 drive | 2,860.0 |
|
| MESAFAST | CA | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M6-1.00 x 20 | M6-1.00x20 hex cap screw 10.9 zinc din 933 | 4.0 |
|
| MESAFAST | CA | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M8-1.25 x 20 | M8-1.25x20 hex cap screw a2 18-8 304 din 933 | 200.0 |
|
| MESAFAST | CA | Hex Head Cap Screw | Grade 2 | Galvanized | 3/4-10 x 5 1/2 | 3/4-10x5-1/2 hex cap screw gr2 hot dipped galvanized | 20.0 |
|
| MESAFAST | CA | L-Wrenches, Allen Wrenches & Torx Wrenches | t-handle slip-release torque wrench 1/4 sq drive preset to 80 inch lbs | 5.0 |
| |||
| MESAFAST | CA | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Galvanized | 1-8 x 4 1/2 | 1-8x4-1/2 heavy hex bolt a325 type-1 hdg usa | 101.0 |
|
| MESAFAST | CA | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Galvanized | 5/8-11 x 2 1/4 | 5/8-11x2-1/4 heavy hex bolt a325 steel hdg | 135.0 |
|
| MESAFAST | CA | Metal Drill Bits | 7/64 | 7/64 heavy duty jobber length black and gold drillco brand | 12.0 |
| ||
| OneMonroe | MI | Self-Clinching Nut | 400 Stainless (405, 410,416,420,430 etc.) | Plain | M3-0.50 x 10 | pem alternative bso4-m3-10 captive cf4-bsom3-10 blind s/o 410 ss thread m3x0.5 / length-10 | 800 |
|
| OneMonroe | MI | Self-Clinching Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x .375 | pem alternative csos-632-6 captive cfcsos632-6 concealed head s/o ss thread-6-32 / length-.375 | 40 |
|
| OneMonroe | MI | Self-Clinching Nut | Steel | Plain | #4-40 | pem alternative fex-440 captive cfex440 miniture nut non-locking ss thread - 4-40 cfex440 M004402C | 525 |
|
| OneMonroe | MI | Self-Clinching Stud | Steel | Zinc/Clear | M6-1.00 x 8 | pem alternative fh-m6-8 captive chm6-8 self-clhing stud crs thread-m6x1.0 / length-8 | 900 |
|
| OneMonroe | MI | Self-Clinching Stud | Steel | Painted | 1/4-20 x 1.00 | pem alternative hfhb-0420-16 captive hchb420-16 high torque stud bronze plain thread-1 / 4-20 / length-1.00 | 300 |
|
| OneMonroe | MI | Self-Clinching Stud | Steel | Painted | 3/8-16 x 1.00 | pem alternative hfhb-0616-16 captive hchb616-16 high torque stud bronze plain thread-3 / 8-16 / length-1.00 | 200 |
|
| OneMonroe | MI | Self-Clinching Nut | Steel | Zinc/Clear | pem alternative sl-m3.5-2 captive sl-m3.5-2 self-locking/self-clhing nut thread m3.5-crs | 700 |
| |
| OneMonroe | MI | Self-Clinching Standoff | Steel | Zinc/Clear | M14 | pem alternative sss-4-14 captive cfsss4-14 spring top s/o crs panel #2 hole dia-4 / length -14 | 380 |
|
| OneMonroe | MI | Self-Clinching Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M3 x 6 | pem alternative fhls-m3-6 captive chesm3-6 self-clhing stud ss-thread-m3 / length-6 | 920 |
|
| OneMonroe | MI | Self-Clinching Standoff | Aluminum | Plain | #8-32 x .625 | pem alternative soa-832-20 captive cfsoa832-20 thru s/o alum thread-8-32 / length-.625 | 60 |
|
| OneMonroe | MI | Self-Clinching Standoff | Steel | Zinc/Clear | #4-40 x .625 | pem alternative so-6440-20 captive cfso6440-20 thru s/o crs thread-4-40 / length-.625 | 1000 |
|
| OneMonroe | MI | Self-Clinching Standoff | Steel | Zinc/Clear | #10-32 x .750 | pem alternative so-032-24 captive cfso1032-24 thru s/o crs thread-10-32 / length-.750 | 900 |
|
| ASFCORP | MI | direct ship freight charge | 9,499,627 |
| ||||
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
