FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Century | FL | kgb810a rev a drs technologies | 174644 |
| ||||
| Century | FL | m39029/63-368 | 61687 |
| ||||
| Century | FL | Flat Washer | Steel | Plain | 0 | an960c8l | 21479 |
|
| Century | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | ms51958-8 | 47394 |
| |
| Century | FL | Cable Clamps & Ties | slcs-750-6-01 cable clamp (CABLE CLAMP) (CABLE CLAMP) | 34000 |
| |||
| Century | FL | as21919wdg08 | 27866 |
| ||||
| Century | FL | cherry r3001-t06-02 | 10940 |
| ||||
| Century | FL | Dowel Pin | nas561sf3-7 | 24805 |
| |||
| Century | FL | Dowel Pin | nas8702-1 | 698 |
| |||
| Century | FL | 12 Point Flange Screw (CounterBore) | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | ms9556-10 | 2580 |
| |
| Century | FL | Socket Head Cap Screw | Steel | bolt - ms9751-17 | 9357 |
| ||
| Century | FL | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | nas1130-3l10 | 805 |
| |||
| Century | FL | m25988/1-010 | 6223 |
| ||||
| Century | FL | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | nas1130-3cl20 | 14986 |
| |||
| Century | FL | m12133/2-125 | 20750 |
| ||||
| Century | FL | as568-006 o?ring epdm 70 duro | 14126 |
| ||||
| Century | FL | Plate Nut (Nutplate, Floating Anchor Nut) | Steel | Plain | ms21062-4 | 6761 |
| |
| Century | FL | O-Rings & Quad Ring Seals (X-Rings) | ma3329-205 insert | 12330 |
| |||
| Century | FL | Dowel Pin | nas1792c08-4 | 13365 |
| |||
| Century | FL | Blind Rivet | nas1580c4t32 | 12066 |
| |||
| SIS | AZ | Hex Head Cap Screw | Grade 2 | Zinc/Clear | 7/8-9 x 3 1/2 | 7/8-9x3-1/2 hex bolt grade 2 steel zinc | 6 |
|
| Ford | NJ | Self-Tapping Self-Drilling Screw (Tek etc.) | 400 Stainless (405, 410,416,420,430 etc.) | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | #8 x 1/2 | #8 x 1/2 self drilling screw phillips modified truss k-lath wafer 410 1000 hour salt spray coating part # 8n50sds41/mt | 162,000 |
|
| American | NY | p.e.m. s-832-3c PEM-S-832-3C | 125 |
| ||||
| Aspen | PA | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/64 x 3/4 | 3/64 x 3/4, solid dowel pins, cnc machined, aisi 304 stainless steel (18-8) | 200000 |
|
| ISSCO | MO | Electrical Lugs & Terminals | Copper | Tin Plated | 12-10 | vinyl insulated term wire ga 12-10 w/6-32 ring size yellow | 1000 |
|
| ISSCO | MO | Electrical Lugs & Terminals | Copper | Tin Plated | 16-14 | heat shrink term 16-14 ga wire 10-32 screw blue | 830 |
|
| ISSCO | MO | Electrical Lugs & Terminals | Copper | Tin Plated | 22-16 | vinyl insulated term wire ga 22-16 w/1/4 ring size red | 1250 |
|
| ISSCO | MO | Electrical Lugs & Terminals | Copper | Tin Plated | 12-10 | vinyl insulated term wire ga 12-10 w/8-32 screw size spade style yellow | 1000 |
|
| ISSCO | MO | Electrical Lugs & Terminals | Copper | Tin Plated | 16-14 | heat shrink term 16-14 ga wire 3/8 screw blue | 350 |
|
| ISSCO | MO | Electronic Components | Nylon (Polyamide) | Plain | 5/8 id | split loom polyethylene black split 5/8 id x 800' roll | 800 |
|
| ISSCO | MO | Electronic Components | Nylon (Polyamide) | Plain | 1/4 ID | split loom polyethylene black split 1/4 id X 3200' roll | 3200" |
|
| ISSCO | MO | Electronic Components | Nylon (Polyamide) | Plain | 7/16 id | split loom polyethylene black split 7/16 id x 1500' roll | 1500 |
|
| SIS | AZ | Lock Nut, Nylon Insert | Steel | Zinc/Clear | 5/16-18 | 5/16-18 nylon insert locknut steel zinc clr | 1598 |
|
| SIS | AZ | Lock Nut, Nylon Insert | Steel | Zinc/Clear | 5/8-11 | 5/8-11 nylon insert lock nut steel zinc | 245 |
|
| SIS | AZ | Lock Nut, Nylon Insert | Steel | Zinc/Clear | 7/16-14 | 7/16-14 nylon insert locknut steel zinc | 100 |
|
| SIS | AZ | Lock Nut, Nylon Insert | Steel | Zinc/Clear | 7/8-9 | 7/8-9 nylon insert lock nut steel zinc | 155 |
|
| SIS | AZ | Flange Nut, Non-locking | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-24 | 3/8-24 hex flange nut 18-8 304 steel plain per drawing | 1020500 |
|
| SIS | AZ | Self-Tapping Drive Screw (type u) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #7 x 3/8 | #7x3/8 (pilot l = .062) round u drive screw 300 series 18-8 304 steel | 2000 |
|
| SIS | AZ | Flange Nut, Non-locking | Grade 8 | Plain | 5/8-18 | 5/8-18 hex flange nut grade 8 steel plain | 25 |
|
| SIS | AZ | Lock Nut, Flange, w/o serrations | Grade 8 | Plain | 5/8-11 | 5/8-11 hex flange lock nut grade 8 plain | 245 |
|
| SIS | AZ | Lock Nut, Nylon Insert | Steel | Zinc/Clear | 1-8 | 1-8 nylon insert lock nut steel zinc | 105 |
|
| SIS | AZ | Lock Nut, Nylon Insert | Steel | Zinc/Clear | 3/4-10 | 3/4-10 nylon insert lock nut steel zinc clear | 390 |
|
| SIS | AZ | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Zinc/Clear | 1-14 | 1-14 stover c all metal locknut steel zinc | 29 |
|
| SIS | AZ | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | Steel | Zinc/Clear | 5/16-24 | 5/16-24 serrated hex flange nut steel zinc | 2850 |
|
| SIS | AZ | Lock Nut, Flange, w/o serrations | Grade 8 | Plain | 1/2-13 | 1/2-13 hex flange lock nut gr. 8 steel | 300 |
|
| SIS | AZ | Self-Tapping Thread Rolling Screw | Steel | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | #6-32 x 3/8 | 6-32x3/8 torx pan head thread rolling screw sz w/magni 560 | 234774 |
|
| SIS | AZ | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Zinc/Clear | 1 | 1 stover c locknut zinc | 25 |
|
| SIS | AZ | Lock Nut, Flange, w serr. (Whiz-Lock etc.) | Steel | Zinc/Clear | 1/2-13 | 1/2-13 hex flange serrated lock nut steel zinc | 750 |
|
| SIS | AZ | Lock Nut, Nylon Insert | Steel | Zinc/Clear | 3/4-16 | 3/4-16 nylon insert locknut steel zinc | 25 |
|
| SIS | AZ | Self-Tapping Thread Rolling Screw | Steel | ASTM F1941-10 Fe/Zn-Ni | #6-32 x 1/2 | 6-32x1/2 t-15 torx pan head thread rolling steel black zinc nickel | 72839 |
|
| SIS | AZ | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | #6-32 x 3/8 | 6-32x3/8 uhwh w/undercut thread rolling steel zinc clear rohs | 280000 |
|
| SIS | AZ | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | #6-32 x 11.05 | 6-32x11.05mm 6-lobe pan head thread rolling steel zinc per print | 3630 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
