FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| OneMonroe | MN | Finished Hex Nut | Nylon (Polyamide) | Plain | 3/4 x 7/16 | 1/2-13 fin hex nut 3/4 x 7/16 nyl nat | 1000 |
|
| OneMonroe | MN | Flared Fittings | Brass | 3/4 x 1/2 | 3/4 x 1/2 forged flare male 90 brass | 6 |
| |
| AFI | FL | Round Spacer | Aluminum | Plain | 3/4 x 1/2 x 1/4 | 3/4 x 1/2 x 1/4 round alum spacer () | 1000 |
|
| FasSpcMfg | FL | Set Screw (Slotted Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 1/2 | 3/4-10 x 1/2 slotted set full dog pt 18-8 stn | 53 |
|
| FasSpcMfg | FL | Set Screw (Square Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-16 x 3/4 | 3/4-16 x 3/4 square head set cup point 18-8 stainless | 7 |
|
| Raw Produ | NJ | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 1d | heli-coil threaded inserts 303 ss 3/4-10 x 1d 21510 | 69 |
|
| Brikksen | FL | Coupling Nut | 316, 317, A4 Stainless | Plain | 3/4-10 x 1 | 3/4-10 coupling nut 316s/s | 400 |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 1 | 3/4-10 x 1 hex head cs ss f593d | inquire |
|
| FasSpcMfg | FL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 1 | 3/4-10 x 1 socket set flat point 304 stainless 2a fit | 3 |
|
| NBS | CA | Dowel Pin | Steel | Plain | 3/4 x 1 | 3/4x1 dowel pin 0.0008 over size alloy bright finish (taiwan) | 10000 |
|
| Empire | WA | Set Screw (Socket Head) | Steel | Plain | 3/4-10 x 1 | 3/4-10 x 1 soc set sc cup | 25 |
|
| Brikksen | FL | Coupling Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 1 x 2 | 3/4-10 coupling nuts s/s 2 long | 200 |
|
| FasSpcMfg | FL | Shoulder Bolt (Stripper Bolt) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4 x 1 1/4 (5/8-11) | 3/4 x 1-1/4 socket shoulder bolt 303 stainless 5/8-11 x 1-1/4 thread | 12 |
|
| OneMonroe | MA | Set Screw (Socket Head) | ASTM A574 | Black Oxide | 3/4-10 x 1 1/4 | 3/4-10 x 1-1/4 black oxide alloy steel flat point socket set screw | 50 |
|
| Olander | CA | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 1 1/4 hx hd sst rohs | 2 |
| |
| Olander | CA | Flat Washer | Steel | Plain | 3/4 x 1.250 x .062 | 3/4 x 1.250 od x .062 thk f/w nyl () () | 1571 |
|
| Longhorn | TX | Hex Head Cap Screw | Grade 8 | Zinc/Clear | 3/4-16 x 1 1/2 | 3/4-16 x 1-1/2 hex cap screw gr 8 z | 8 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | ASTM A320 L7, L7M | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 3/4-10 x 17 1/4 | 3/4-10x17-1/4 astm a320 l7 all thread stud tfe black | 620 |
|
| Lightning | LA | Hex Head Cap Screw | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | 3/4-10 x 1 3/4 | hex c/s hastelloy c-276 | 23 |
|
| Brikksen | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | 3/4-10 x 1 3/4 | 3/4-10 x 1-3/4 hx hd c/s 316ss | 700 |
|
| OneMonroe | MN | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 1 3/4 | 3/4-10 x 1 3/4 shc 594a blue dykem | 9 |
|
| Brikksen | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | 3/4-10 x 18 | 3/4-10 x 18 hex head cs 316ss w/6 thread | inquire |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | ASTM A320 L7, L7M | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 3/4-10 x 18 | 3/4-10x18 astm a320 l7 all thread stud tfe black | 603 |
|
| FasSpcMfg | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 1.937 | (revision apt4) 3/4-10 x 1.937 special socket cap 18-8 stainless dimensions per drawing apt4 | 3 |
|
| NBS | IL | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4 x 2 | 3/4x2 18-8 s/s steel dowel pin-asme b18.8.2-bright finish (taiwan) | 25000 |
|
| OneMonroe | MA | Set Screw (Socket Head) | Steel | Plain | 3/4-10 x 2 | 3/4-10 x 2 soc set-cup pt | 46 |
|
| FasSpcMfg | FL | Socket Head Cap Screw | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | 3/4-10 x 2 | 3/4-10 x 2 socket cap 17-4 ph h1150 | 1 |
|
| F. Solutions | OH | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 3/4-10 x 2 | hex head cap screw 3/4-10x2 gr8 zinc yellow packaged 50 per | 150 |
|
| Field Fas | IL | Eye Bolt | Steel | Plain | 3/4-10 x 2 | 3/4-10 x 2 forged shoulder eye bolt 5 0 | 62 |
|
| Field Fas | IL | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 3/4-10 x 20 | 3/4-10 x 20 a193 b7 full thread stud | 24 |
|
| OneMonroe | MN | Carriage Bolt | Grade 5 | Zinc/Clear | 3/4-10 x 2 | 3/4-10 x 2 gr.5 carr bolt-zp | 20 |
|
| F. Solutions | OH | Hex Head Cap Screw | Steel | Galvanized | 3/4-10 x 2 | hex head cap screw 3/4-10x2 a325 hot dipped galvanized | 10 |
|
| OneMonroe | MN | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-16 x 2 | 3/4-16 x 2 hex c/s 18-8ss | 8 |
|
| NutsBolts | NE | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B7 | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 3/4-10 x 2 1/4 | 3/4-10x2 1/4 b7 hvy hex bolt xylan blue | 100 |
|
| Alma Bolt | MI | Hex Machine Bolt | Grade 2 | Zinc/Clear | 3/4-10 x 2 1/4 | 3/4-10 x 2 1/4 hex hd bolt gr2 zp | 1800 |
|
| Field Fas | IL | Shoulder Bolt (Stripper Bolt) | Steel | Plain | 3/4 x 2 1/4 (5/8-11) | 3/4 x 2 1/4 soc shoulder screw | 96 |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 2 1/2 | 3/4-10 x 2-1/2 hex head cs ss full thread f593d | 5000 |
|
| BHAM | TX | Hex Head Cap Screw | Grade 5 | Plain | 3/4-10 x 2 1/2 | 3/4-10x2 1/2 hex c/s gr5 b18.2.1 | 116 |
|
| Brikksen | FL | Shoulder Bolt (Stripper Bolt) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4 x 2 1/2 (5/8-11) | 3/4 x 2-1/2 shoulder bolt 18-8 ss | inquire |
|
| Lightning | LA | Hex Head Cap Screw | Titanium | Plain | 3/4-10 x 2 1/2 | hex capscrew | 730 |
|
| Lightning | LA | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B7 | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 3/4-10 x 2 1/2 | astm a193 b7 heavy h/b teflon blue | 67 |
|
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 2 1/2 | 3/4-10 x 2-1/2 soc hd c/s ss | inquire |
|
| THRDFAST | OK | Hex Head Cap Screw | Grade 2 | Plain | 3/4-10 x 2 1/2 | gr2 hex c/s domestic b18.2.1 | 1 |
|
| Pac Bolt | BC | Hex Machine Bolt | Steel | Galvanized | 3/4 x 26 | 3/4 x 26 hex bolt galv 6 nc b18.2.1 | 100 |
|
| F. Solutions | OH | Hex Head Cap Screw | Grade 2 | Zinc/Clear | 3/4-10 x 2 3/4 | hex head cap screw 3/4-10x2-3/4 grade 2 zinc plated | 5 |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 2 3/4 | 3/4-10 x 2-3/4 hex hd cs ss f593d | inquire |
|
| OneMonroe | MN | Hex Head Cap Screw | Grade B7M | Plain | 3/4-10 x 2 3/4 | 3/4-10 x 2 3/4 a193-b7m fin. hhc | 1 |
|
| BRIGHBEST | IL | Hex Head Cap Screw | Grade 9 | Zinc/Yellow | 3/4-10 x 2 3/4 | 3/4-10x2 3/4 pfc9 hex cap screw - usa zinc yellow | 510 |
|
| F. Solutions | OH | Fully Threaded Stud (All Thread) | Grade B7 | Galvanized | 3/4-10 x 3 | stud full thread 3/4-10x3 a193 b7 domestic material galvanized | 4 |
|
| THRDFAST | MS | Threaded Rod | Steel | Zinc/Clear | 3/4-10 x 3 | ft a/t rod b18.31.3 | 3 |
|
| NBS | IL | 12 Point Flange Screw (CounterBore) | null | Plain | 3/4-10 x 3 | 3/4-10 x 3 12 point flange bolt-furnace black (taiwan) | 10000 |
|
| OneMonroe | MN | Hex Head Cap Screw | Grade 8 | Plain | 3/4 x 3 1/4 | 3/4 x 3 1/4 gr8 hhc | 10 |
|
| OneMonroe | MN | Hex Tap Bolt (Fully Threaded) | Grade 2 | Zinc/Clear | 3/4 x 3 1/4 | 3/4 x 3 1/4 gr2 hex tap bolt zp | 24 |
|
| OneMonroe | MN | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 3/4-10 x 3 1/4 | 3/4-10 x 3 1/4 a193 b7 te stud 3/4 ff3a-1 1/4 ff2a sc-1 coat | 1 |
|
| CIF | IL | Set Screw (Square Head) | Steel | Phosphate | 3/4-10 x 3 1/4 | 3/4-10 x 3 1/4 square head set screw with cup point steel case hardened phos coated for 72 hours to red rust | 156 |
|
| CIF | IL | Flange Screw w/o serr. (Frame Bolt) | Grade 8 | Black Oxide | 3/4-10 x 3 1/4 | 3/4-10 x 3 1/4 body bound bolt grade 8 black oxide | 3934 |
|
| Irwin Ind | Ont | Hex Head Cap Screw | Grade 8 | Zinc/Clear | 3/4-16 x 3 1/2 | 3/4-16 x 3-1/2 hex capscrew gr8 zinc dich | 50 |
|
| NBS | IL | Dowel Pin | Steel | Plain | 3/4 x 3 1/2 | 3/4x3-1/2 dowel pin alloy bright finish. ( made in taiwan ) | 10000 |
|
| OneMonroe | MN | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B | Zinc/Clear | 3/4-10 x 3 1/2 | 3/4-10 x 3 1/2 heavy hex bolt a307-b steel zinc plated | 53 |
|
| Brikksen | FL | Carriage Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 3 1/2 | 3/4-10 x 3-1/2 carr bolt ss | inquire |
|
| Field Fas | IL | Double End Stud | Plain | 3/4-10 x 3 1/2 | 3/4-10 x 3 1/2 double end stud full bod | 2 |
| |
| Brikksen | FL | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain | 3/4-10 x 3 1/2 | 3/4-10 x 3-1/2 socket head cs 316ss | inquire |
|
| ASFCORP | MI | Hex Head Cap Screw | Grade 8 | Plain | 3/4-10 x 3 3/4 | 3/4-10 x 3 3/4 hx hd cap scw gr 8 | 57 |
|
| NBS | IL | Dowel Pin | Steel | Plain | 3/4 x 3 3/4 | 3/4x3-3/4 dowel pin alloy bright finish. ( made in taiwan ) | 10000 |
|
| Lightning | LA | Heavy Hex Structural Bolt (A325, A490, 10.9) | Steel | Galvanized | 3/4-10 x 3 3/4 | a325 heavy h/b hdg hot dipped | 734 |
|
| Lightning | LA | Hex Head Cap Screw | ASTM A320 L7, L7M | Plain | 3/4-10 x 4 | hex c/s l7 | 529 |
|
| FasSpcMfg | FL | Sockets | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 3/4-10 x 4 | 3/4-10 x 4 socket set cup point 18-8 stainless | 2 |
| |
| OneMonroe | MN | Socket Head Cap Screw | ASTM A574 | Plain | 3/4-16 x 4 | 3/4-16 x 4 shcs-holo-krome usa-plain | 17 |
|
| Brikksen | FL | Lag Screw | 316, 317, A4 Stainless | Plain | 3/4 x 4 | 3/4 x 4 hex lag bolt 316ss | 10 |
|
| NBS | CA | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4 x 4 | 3/4x4 18-8 s/s steel dowel pin-asme b18.8.2-bright finish (taiwan) | 25000 |
|
| Field Fas | IL | Double End Stud | ASTM A320 L7, L7M | Plain | 3/4-10 x 4 | 3/4-10 x 4 double ended stud w/7/8 threaded on one side and 2 7/8 threaded on other side astm a320 l7 stl pln | 154 |
|
| Brikksen | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | 3/4-16 x 4 | 3/4-16 x 4 hex head cs 316ss unthreaded section to be .75 f593h | inquire |
|
| SWACO | OH | Set Screw (Square Head) | Steel | Plain | 3/4-10 x 4 | 3/4-10x4 square set sc cup stl thru- | 155 |
|
| THRDFAST | MS | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain | 3/4-10 x 4 | t-316 ss socket c/s b18.2.1 b18.3 | 2 |
|
| Brikksen | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | 3/4-10 x 4 | 3/4-10 x 4 hex hd cs 316 ss | 40 |
|
| Brikksen | FL | Double End Stud | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 4 | 3/4-10 x 4 double end stud 18-8ss with 1-3/4 thread each end | inquire |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | ASTM A320 L7, L7M | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 3/4-10 x 4 | 3/4-10x4 a320 l7 all thread stud tfe blue | 4 |
|
| BoltCraft | NE | U-Bolt | Steel | Zinc/Yellow | 3/4-10 x 4 1/16 | 3/4-10 x 4-1/16 iw x 5 il x 1-1/2 thread square bend u-bolt 1541 zinc yellow | 234 |
|
| OneMonroe | MN | Sleeve Anchor | Plain | 3/4 x 4 1/2 | 3/4 x 4 1/2 power bolt anchorpower bolt | 70 |
| |
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 4 1/2 | 3/4-10 x 4 1/2 soc head cs ss | inquire |
|
| NBS | IL | Dowel Pin | Steel | Plain | 3/4 x 4 1/2 | 3/4x4-1/2 dowel pin alloy bright finish. ( made in taiwan ) | 10000 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B8M | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 3/4-10 x 4 3/4 | astm a193 b8m class 2 all thread stud teflon orange | 9 |
|
| Lightning | LA | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B | Plain | 3/4-10 x 5 | 3/4-10x5 h/b gr.2 warehouse look for hvy h/b grb | 335 |
|
| Alma Bolt | MI | Set Screw (Square Head) | Plain | 3/4-10 x 5 | 3/4-10 x 5 square head set screw | 24 |
| |
| NBS | IL | 12 Point Flange Screw (CounterBore) | null | Plain | 3/4-10 x 5 | 3/4-10 x 5 12 point flange bolt-furnace black (taiwan) | 10000 |
|
| Optimas | IL | Hex Head Cap Screw | Grade 8 | Plain | 3/4-10 x 5 | 3/4-10 x 5 hex cap screw gr8 | 345 |
|
| Alma Bolt | MI | Carriage Bolt | Steel | Plain | 3/4-10 x 5 | 3/4-10 x 5 carriage bolt | 102 |
|
| Brikksen | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | 3/4-10 x 5 | 3/4-10 x 5 hex hd cs 316 ss | inquire |
|
| Stelfast | OH | Flange Screw w/o serr. (Frame Bolt) | Grade 8 | Phosphate | 3/4-10 x 5 | 3/4-10x5 (ft) ind hex hd flange scr (frame bolt) grade-8 phos/oil | inquire |
|
| Sigma Fas | TX | Fully Threaded Stud (All Thread) | Grade B7 | Zinc/Yellow | 3/4-10 x 5 | 3/4-10x5 (4-3/4 f to f) a193 b7-a194 2h all thread stud with 2 heavy hex nuts yellow zinc end to end | 11,490 |
|
| NutsBolts | NE | Tension Control Bolt (F3125 Gr. F1852, F2280) | Plain | 3/4-10 x 5 1/4 | 3/4-10 x 5 1/4 f1852/a325 tc assembly plain | 85 |
| |
| Alma Bolt | MI | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 5 1/2 | 3/4-10 x 5 1/2 st st hcs 18-8 | 20 |
|
| Field Fas | IL | Hex Head Cap Screw | Grade 5 | Plain | 3/4-10 x 5 1/2 | 3/4-10 x 5 1/2 hex cap screw gr 5 pln | 8 |
|
| Lightning | LA | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B | Plain | 3/4-10 x 5 1/2 | 3/4-10x5-1/2 a307 gr.b heavy h/b tef blue | 34 |
|
| Mansco | MI | Wedge Stud Anchor | Steel | Zinc/Clear | 3/4 x 5 1/2 | 3/4x5-1/2 wedge anchor znc 10/box | 22 |
|
| OneMonroe | MN | Hex Machine Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4 x 5 1/2 | hex head bolt stainless 3/4 x 5-1/2 | 1 |
|
| Brikksen | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | 3/4-10 x 5 1/2 | 3/4-10 x 5-1/2 hex hd cs 316ss | inquire |
|
| Alma Bolt | MI | Hex Head Cap Screw | Grade 8 | Plain | 3/4-16 x 5 1/2 | 3/4-16 x 5 1/2 grade 8 ally hcs sae | 393 |
|
| Brikksen | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | 3/4-10 x 6 | 3/4-10 x 6 hex hd cs 316ss | 1000 |
|
| AFT Faste | TX | Heat Shrink Tubing | 3/4 x 6 | 3/4x6 heat shrink | 490 |
| ||
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 6 | 3/4-10 x 6 soc head c/s ss | inquire |
|
| THRDFAST | OK | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 3/4-10 x 6 | gr8 hex c/s z&y b18.2.1 | 25 |
|
| OneMonroe | MN | Wedge Stud Anchor | Plain | 3/4 x 6 | 3/4 x 6in wedge bolt | 33 |
| |
| Brikksen | Threaded Rod | Plain | 3/4-10 x 6 | 3/4-10 x 6 ft all thread rod asme | 480 |
| ||
| CIF | IL | Liner Bolt | ASTM A574 | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | 3/4-16 x 6 1/2 | 3/4-16 x 6 1/2 liner bolt alloy with 0.250 long dog point 36/43 magni 575 (black) | 985 |
|
| Lightning | LA | Heavy Hex Bolt (B7, B8, A307B etc.) | Grade B7 | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 3/4-10 x 7 | astm a193 b7 heavy h/b teflon blue | 438 |
|
| THRDFAST | AL | Lag Screw | Steel | Plain | 3/4 x 7 | hex lag bolt | 49 |
|
| F. Solutions | OH | Clevis Pin | Steel | Zinc/Yellow | 3/4 x 7 | hitch pin 3/4x7 (6-1/4 useable) yellow zinc with round handle | 1 |
|
| SWACO | OH | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 3/4-10 x 7 | 3/4-10x7 hhcs gr5 zpcr3 usa | 19 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 3/4-10 x 7 1/4 | astm a193 b7 all thread stud | 107 |
|
| Kanebridge | IL | Hex Head Cap Screw | Grade 8 | Plain | 3/4-10 x 7 1/2 | 3/4-10x7 1/2 hex tap bolt ful thread gr8 plain tap bolts | 250 |
|
| CIF | IL | Liner Bolt | ASTM A574 | Black Oxide | 3/4-16 x 7 1/2 | 3/4-16 x 7 1/2 liner bolt no threads alloy with 0.250 long dog point 36/43 black oxide | 840 |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | Grade B7 | Zinc/Yellow | 3/4-10 x 7 3/4 | astm a193 b7 all thread stud | 753 |
|
| IPC | VA | Socket Head Cap Screw | Steel | Plain | 3/4-10 x 8 | 3/4-10x8 f.h. soc c/s | 6 |
|
| OneMonroe | MN | Carriage Bolt | Steel | Plain | 3/4 x 8 | 3/4 x 8 cge bolt | 20 |
|
| CIF | IL | Liner Bolt | ASTM A574 | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | 3/4-16 x 8 1/2 | 3/4-16 x 8 1/2 liner bolt alloy with 0.250 long dog point 36/43 magni 575 (black) | 242 |
|
| THRDFAST | OK | Set Screw (Square Head) | Steel | Plain | 3/4-10 x 9 | square set cup pt b18.6.2 | 8 |
|
| Mansco | MI | Pipe Elbow | Iron | Galvanized | 3/4npt x 90 | 3/4 nptx90 deg street pipe elbow malleable usa 35/box | 12 |
|
| Stelfast | OH | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 3/4-10 x 9 1/2 | 3/4-10x9-1/2 stud grade-b7 measured end/end | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 10 | 3/4-10 x 10 hex head cs ss full thread f593d | inquire |
|
| Lightning | LA | Fully Threaded Stud (All Thread) | ASTM A320 L7, L7M | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 3/4-10 x 11 1/2 | 3/4-10x11-1/2 astm a320 l7 all thread stud tfe black | 565 |
|
| Alma Bolt | MI | Lag Screw | Galvanized | 3/4 x 12 | 3/4 x 12 hdg hex lag screw | 90 |
| |
| Brikksen | FL | Carriage Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 12 | 3/4-10 x 12 carriage bolt ss with 6 thread | inquire |
|
| Brikksen | FL | Threaded Rod | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 12 | 3/4-10 x 12 full thread rod ss | inquire |
|
| Brikksen | FL | Threaded Rod | Grade B8 | Plain | 3/4-10 x 12 | 3/4-10 x 12 full thread rod a193 b8 | inquire |
|
| Brikksen | FL | Threaded Rod | Grade B8 | Plain | 3/4-10 x 12 | 3/4-10 x 12 full thread rod a193 b8 | inquire |
|
| OneMonroe | MN | Service & Repair Kits (Bolt & Nut Packs) | Plain | 3/4 x 12 | 3/4 x 12 plain finish bent anch bolt w/nut & washer | 9 |
| |
| SWACO | OH | Hex Head Cap Screw | Grade 5 | Plain | 3/4-10 x 13 | 3/4-10x13 hhcs gr5 pln | 3 |
|
| SWACO | OH | Fully Threaded Stud (All Thread) | Grade B7 | Plain | 3/4-10 x 14 | 3/4-10x14 full thread stud b7 | 4 |
|
| Brikksen | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | 3/4-10 x 14 | 3/4-10 x 14 hex head cs 316ss w/6 thread | inquire |
|
| Lightning | LA | Hex Machine Bolt | Grade A | Galvanized | 3/4-10 x 14 | hex hd m/b a307 . w/6 thd | 159 |
|
| American | WI | Heavy Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 | 3/4-10 nc hvy hex nut #310 ss | 382 |
|
| Brikksen | FL | Finished Hex Nut | Grade 5 | Zinc/Clear | 3/4-10 | 3/4-10 hex nuts grade-5 s/zinc | inquire |
|
| CIF | IL | USS Flat Washer | Grade 2 | Zinc/Clear | 3/4 | 3/4 flat washer uss grade 2 zinc plated | 109 |
|
| Raw Produ | NJ | Plow Bolt, Scraper Blade Bolt | Grade 5 | Plain | 3/4-10 x 2 | flat head plow bolts grade 5 plain 3/4-10 x 2 ft | 500 |
|
| SPC | TX | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Cadmium | 3/4-16 | 3/4-16 light hex thin height flexslotted steel cad and wax | 603 |
|
| OneMonroe | MN | L-Wrenches, Allen Wrenches & Torx Wrenches | 3/4 | 3/4 long hex key | 7 |
| ||
| OneMonroe | MN | Sprockets | Plain | 3/4 | 50b sprocket 3/4 stock bore 29 hardened teeth | 54 |
| |
| OneMonroe | MN | Hoses | Rubber, Buna-N, Neoprene etc. | Plain | 3/4 | 3/4 300 red synthetic rubber air and water hose (priced per ft.) | 60 |
|
| Brikksen | FL | Split Cotter Ring, Split Ring, Ring Cotter, Rue Ring | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4 | 3/4 cotter ring 18-8 ss 100 per small bag 5 small bags per master pack-generic brand | inquire |
|
| BHAM | TX | F436 Round Structural Washer | Steel | Galvanized | 3/4 | 3/4 f436 str rd dom. h.d.galv b18.2.6 | 264 |
|
| OneMonroe | MN | Binding Post & Screw Set (Camtainer Bolt & Nut set, Sex Bolt) | Plain | 3/4 | 3/4 ball bearing clamp-type lock collar with 2 set screws at 90 degrees triple lip seals permanently lubricated | 5 |
| |
| OneMonroe | MN | Internal Type HO Retaining Ring | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4 | 3/4 ss wir c/od snap ring b/brg per print kbz-s mpi rev.a 1-6-16 | 163 |
|
| Brikksen | FL | Finished Hex Nut | Steel | Zinc/Clear | 3/4-10 | 3/4-10 hex nut steel znc/dich 321350 | 3000 |
|
| Optimas | IL | Hose Clamp | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 3/4 | 2.69 v band hose clamp 301 stainless steel 3/4 wide ppap | 114 |
| |
| AFI | FL | Staples | 3/4 | 3/4 carton closing staple () | 2500 |
| ||
| OneMonroe | MA | Hex Jam Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 | nut hex jam 3/4-10 s/s | 42 |
|
| Brikksen | FL | Finished Hex Nut | 316, 317, A4 Stainless | Plain | 3/4-10 | 3/4-10 hex nut 316 ss 10 per small bag 5 small bags per master pack-generic brand | inquire |
|
| American | WI | Wedge Stud Anchor | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4 x 10 | 3/4x10 wedge anchor #18-8 ss | 10 |
|
| Raw Produ | NJ | Pipe Reducer | Steel | Zinc/Clear | 3/4-10 | reducer nuts zinc 3/4-10 to 5/8-11 | 184 |
|
| OneMonroe | MN | Finished Hex Nut | Plain | 3/4-16 | 3/4-16 stem nut per dwg spec 162-a2 | 1 |
| |
| OneMonroe | MN | Hex Jam Nut | Grade 5 | Zinc/Clear | 3/4 | 3/4 gr5 hex jam nut zp | 26 |
|
| OneMonroe | MN | Sprockets | Plain | 3/4 | 50b sprocket 3/4 finished bore 19 hardened teeth | 28 |
| |
| Kanebridge | IL | Square Nut | Grade 5 | Plain | 3/4-10 | 3/4-10 square nut regular grd 5 plain nuts | 2000 |
|
| Raw Produ | NJ | SAE Flat Washer | Grade 8 | Plain | 3/4 | flat washers sae grade 8 3/4 | 1461 |
|
| OneMonroe | MN | Sprockets | Plain | 3/4 | 40b sprocket 3/4 finished bore 14 hardened teeth per mpi rev. a 03/23/2020 note for min627 parts paired & bagged | 339 |
| |
| American | WI | Tension Control Bolt (F3125 Gr. F1852, F2280) | Plain | 3/4-10 x 2 1/2 | 3/4-10x2-1/2 tension control bolt assembly f2280-a490 | 2603 |
| |
| American | WI | Pipe Nipple | Steel | 3/4 x 12 | 3/4x12 pipe nipple steel sch 80 black | 24 |
| |
| GLF | OH | Pipe Plugs (Square Head) | Plain | 3/4-14 | 3/4-14 npt blk merchant sq hd pipe plug cl 150 | 10 |
| |
| OneMonroe | MN | Sprockets | Plain | 3/4 | 50b sprocket 3/4 stock bore 23 hardened teeth | 62 |
| |
| Longhorn | TX | Heavy Hex Structural Bolt (A325, A490, 10.9) | Plain | 3/4-10 x 2 1/2 | 3/4-10 x 2-1/2 a325 t.c. structural bolt plain (usa) | 390 |
| |
| OneMonroe | MA | Lock Nut, Flange, w/o serrations | Steel | Plain | 3/4-10 | 3/4-10 non-serr. hx. flange l/n-plain | 21 |
|
| Optimas | IL | Cable Clamps & Ties | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 3/4 | 3/4 p form cable clamp stainless steel rubber cushion 1/2 w (i) | 2945 |
| |
| Empower H | IL | Hairpin Cotter Pin (Bridge Pin, R-Clip) | Steel | Zinc/Yellow | 3/4 | yrp11516yellow zinc chromate plated r clip pinwire diameter-1/8 total length-1-15/16 fits pin diameter-1/2 to 3/4 | 10000 |
|
| THRDFAST | OK | Heavy Hex Nut | ASTM A563 Grade DH | Plain | 3/4-10 | gr dh type-3 hvy hex nut tapped to.02 oversize domestic b18.2.2 b18.2.6 | 3 |
|
| AFI | FL | Round Spacer | Nylon (Polyamide) | Plain | 3/4 | 3/4 rd spacer nylon () | 652 |
|
| THRDFAST | AL | Hex Jam Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4 | nf-16 18-8 ss hex jam nut b18.2.2 | 6 |
|
| Raw Produ | NJ | Lock Nut, Top Locking, All Metal (Automation style, etc.) | Steel | Zinc/Clear | 3/4-16 | stover nuts cone lock nuts zinc 3/4-16 | 500 |
|
| Raw Produ | NJ | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 5 | socket cap screws 304 ss 3/4-10 x 5 (pt) | 5 |
|
| OneMonroe | MN | Grease Fittings | Brass | Black Oxide | 3/4-16 | 1-3/4 od cyl cam follower 3/4-16 unf threads sealed hex drive black oxide finish w/ brass grease zerk (uninstalled) | 2 |
|
| American | WI | Double End Stud | Duplex Stainless (2205, Ferralium etc.) | Plain | 3/4-10 x 5 | 3/4-10x5 nc d/e stud duplex 2205 w/1.2 toe & 3.0 toe per print 08-116-881-006 | 2 |
|
| Brikksen | FL | Heavy Hex Nut | Grade 2H | Galvanized | 3/4-10 | 3/4-10 heavy hex nut a194/2h hdg 313200 | inquire |
|
| Raw Produ | NJ | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 3 1/2 | flat head socket cap screws 304 ss 3/4-10 x 3-1/2 | 8 |
|
| OneMonroe | MA | Spring Steel Lock Nut (PalNut, etc.) | Steel | Zinc/Clear | 3/4 | pal nut pushnut for 3/4 diameter sha ft steel zinc rohs compliant | 1000 |
|
| Brikksen | FL | Split Cotter Ring, Split Ring, Ring Cotter, Rue Ring | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4 | 3/4 cotter ring 18-8 ss 100 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Hex Jam Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-16 | 3/4-16 hex jam nut 18-8 ss 10 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Cable Clamps & Ties | Nylon (Polyamide) | 3/4 | 3/4 cable clamp natural nylon 22cc50d0750 | inquire |
| |
| F. Solutions | OH | Threaded Rod | Steel | Plain | 3/4-16 x 12 | threaded rod 3/4-16unf x 12 steel plain | 47 |
|
| American | WI | Dowel Pin | Steel | Plain | 3/4 x 3 | 3/4x3 dowel pin | 30 |
|
| OneMonroe | MN | Sprockets | Plain | 3/4 | 35b sprocket 3/4 finished bore 25 hardened teeth | 27 |
| |
| Raw Produ | NJ | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-16 x 7 | hex cap screws 304 ss 3/4-16 x 7 | 500 |
|
| OneMonroe | MN | U-Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 | 3/4-10 ubolt a276/304 ss 70ksi 13 5/8 ctrs 15 3/4 oah 2 1/4tl | 1 |
|
| Raw Produ | NJ | Lock Nut, Nylon Insert | Brass | Plain | 3/4-10 | brass nylon insert lock nuts 3/4-10 | 634 |
|
| Brikksen | FL | Tooth Lock Washer (Int. & Ext.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 3/4 | 3/4 external tooth l/w 410ss | 6000 |
|
| Raw Produ | NJ | Hex Head Cap Screw | Grade 8 | Plain | 3/4-10 x 8 | hex cap screws grade 8 3/4-10 x 8 pt | 70 |
|
| SPC | TX | Lock Nut, Top Locking, All Metal (Automation style, etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Silver Plated | 3/4-16 | 3/4-16 light hex thin height flexlsot 18-8 304 steel silver plate military grade (flexloc) | 17 |
|
| Hodell | OH | Lock Nut, Nylon Insert | Steel | Zinc/Clear | 3/4-16 | 3/4-16 nyl ins l/n unf zinc | 17 |
|
| Longhorn | TX | Heavy Hex Structural Bolt (A325, A490, 10.9) | Galvanized | 3/4-10 x 1 3/4 | 3/4-10 x 1-3/4 a325 structural bolt hdg | 220 |
| |
| NutsBolts | NE | Concrete/Masonry Screw (Tapcon, Titen etc.) | Steel | Galvanized | 3/4 x 10 | 3/4 x 10 titen hd galv | 1 |
|
| F. Solutions | OH | Fully Threaded Stud (All Thread) | Grade B7 | Fluoropolymer-Based (Xylan, Fluorokote, Teflon) | 3/4-10 x 12 1/2 | stud full thread 3/4-10 x 12-1/2 a193 b7 xylan coated | | 6 |
|
| OneMonroe | MA | Finished Hex Nut | Steel | Plain | 3/4-10 | 3/4-10 finished hex nut steel plain | 76 |
|
| SWACO | OH | Finished Hex Nut | Steel | Plain | 3/4-10 | 3/4-10 fin hx nut stl plain | 3226 |
|
| Raw Produ | NJ | Heavy Hex Structural Bolt (A325, A490, 10.9) | Plain | 3/4-10 x 3 3/4 | structural bolts a325 plain 3/4-10 x 3-3/4 | 500 |
| |
| Brikksen | FL | Tooth Lock Washer (Int. & Ext.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | 3/4 | 3/4 external tooth l/w 410ss | inquire |
|
| OneMonroe | MN | Self-Tapping Screw w/ Neo Bonded Washer (Roofing/Siding/Pole Barn Screw) | Plain | 3/4 | 3/4 ball bearing wide inner ring set screw locking l2 seals | 320 |
| |
| Alma Bolt | MI | Sockets | Steel | Black Oxide | 3/4-14 1/2 | 3/4-14 black oxide 1/2 drive hex socket pipe plug carbon stl | 17150 |
|
| NutsBolts | NE | Beveled Washer (Round & Square) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4 | 3/4 ss bevel washer | 50 |
|
| Brikksen | FL | Split Lock Washer | Silicon Bronze | Plain | 3/4 | 3/4 med lock washer sil brz .188 min thk | inquire |
|
| Longhorn | TX | Hex Head Cap Screw | Grade 8 | Zinc/Clear | 3/4-16 x 3 1/2 | 3/4-16 x 3-1/2 hex cap screw gr 8 z | 45 |
|
| Raw Produ | NJ | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 x 7 | hex cap screws 304 ss 3/4-10 x 7 pt | 19 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
