FCH Member Advertisement
FCH News
3 inch length Power Transmission
116 results, (click on any line for more information)
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Jackson | MS | Ball Bearings, Balls, Bearing Mounts | Steel | Zinc/Clear | 5/8 x 3 | pin ball detent with split ring | 4 |
|
| Endries | WI | O-Rings & Quad Ring Seals (X-Rings) | Plain | 2-13/16 x 3 x 3/32 | 2-13/16x3x3/32 o-ring 70 duro elastomer-nitrile (cert) | 3985 |
| |
| SWACO | OH | Turned, Ground & Polished Shafting | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4 x 3 | 1/4 x 3 303 stainless steel shaft | 327 |
|
| SWACO | OH | Ball Bearings, Balls, Bearing Mounts | Plain | 3 x 3 | 3l3-f nyliner flange bearing | 2614 |
| |
| NAPPCO | TX | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 2 7/8 x 3 | o-ring 2-7/8 id x 3 od buna n-70 | 90 |
|
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Steel | Plain | 12 x 3 | 12x3 semi-steel wheel 1 roll.brg. | 5 |
|
| OneMonroe | NC | Clevis Yoke Ends, Clevis Fork Joints etc. | Plain | 1/2 x 3 | 1/2 x 3 yoke pin | 8 |
| |
| OneMonroe | NC | Clevis Yoke Ends, Clevis Fork Joints etc. | Plain | 5/8 x 3 | 5/8 x 3 yoke pin | 249 |
| |
| OneMonroe | NC | Grease Fittings | Plain | 1/2 x 3 | zerk axle 1/2 x 3 | 51 |
| |
| NutsBolts | NE | Rod Ends, Heim Joints, Rose Joints | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 3 | 3/8-16 x 3 rod end ss | 21 |
|
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Steel | Zinc/Clear | 6 x 3 | wheel sz 6 x 3 mat cast iron gray enamel finish bearing roller bearing bore 1-1/4 bore less bearing 1-15/16 hub length 3-1/4 load cap 2800 lbs temp rt-45 to +800 f | 40 |
|
| Field Fas | IL | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 3 x 3 | 3 x 3 1/8 o-ring .062 c.s. 70 durometer buna-n | 992 |
|
| Vogelsang | NJ | Tension Bushings & Dowel Bushings | Steel | Plain | 3 1/2 x 3 x 2 | 3-1/2 x 3 x 2 tension bushing wavy slot | 277 |
|
| Vogelsang | NJ | Tension Bushings & Dowel Bushings | Steel | Plain | 3 1/2 x 3 x 3 | 3-1/2 x 3 x 3 tension bushing wavy slot | 2,192 |
|
| Vogelsang | NJ | Tension Bushings & Dowel Bushings | Steel | Plain | 3 1/2 x 3 x 1 | 3-1/2 x 3 x 1 tension bushing wavy slot | 607 |
|
| Vogelsang | NJ | Tension Bushings & Dowel Bushings | Steel | Plain | 3 1/2 x 3 x 1 | 3-1/2 x 3 x 1 tension bushing straight slot | 143 |
|
| Vogelsang | NJ | Tension Bushings & Dowel Bushings | Steel | Plain | 3 1/2 x 3 x 1 1/2 | 3-1/2 x 3 x 1-1/2 tension bushing wavy slot | 20 |
|
| Vogelsang | NJ | Tension Bushings & Dowel Bushings | Steel | Plain | 3 1/2 x 3 x 2 1/2 | 3-1/2 x 3 x 2-1/2 tension bushing wavy slot | 40 |
|
| Ababa | CA | Rod Ends, Heim Joints, Rose Joints | 5/16 x 3 | 5/16 x 3 forged rod end | 4 |
| ||
| Exim | S'pore | Gears | Steel | Plain | 1 x 3 | racks c45 20 pressure angle full depth toothcarbon steelmfr p/n rk1sd 3-1010 | 33 |
|
| Exim | S'pore | Gears | Steel | Plain | 1.5 x 3 | racks c45 20 pressure angle full depth toothcarbon steelmfr p/n rk1.5sd 3-1616 | 10 |
|
| Exim | S'pore | Gears | Steel | Plain | 2 x 3 | racks c45 20 pressure angle full depth toothcarbon steelmfr p/n rk2sd 3-2020 | 40 |
|
| Vogelsang | NJ | Tension Bushings & Dowel Bushings | Steel | Plain | 3 1/2 x 3 x 2 1/2 | 3-1/2 x 3 x 2-1/2 tension bushing straight slot | 1 |
|
| HBBOLT | CA | O-Rings & Quad Ring Seals (X-Rings) | 1/4 x 3 | bit holder w/o-ring | 12 |
| ||
| WDMB | IA | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 75 x 3 | oring buna 75 dur parker n304 75 3 932 1902220095092 100 (W0V0) | 597 |
|
| WDMB | IA | Machine Bushings | Steel | Zinc/Clear | 2 x 3 | bushing mach 10ga st (zt) 2x3 (W0V0) | 704 |
|
| WDMB | IA | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 75 x 3 | oring buna 75 dur parker n304 75 3 920 1902220093092 100 (W040) | 609 |
|
| WDMB | IA | O-Rings & Quad Ring Seals (X-Rings) | Steel | Black Oxide | 101 0 x 3 | o ring hnbr 80dur black 101 0x3 0 (W000) (W000) | 200 |
|
| WDMB | IA | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | x 3 | oring-buna-75-dur-parker-n304-75 3-910 | 830 |
|
| WDMB | IA | Machine Bushings | 838 x 3 | bushing brz relbrz ff 838 3 | 60 |
| ||
| QFC | TX | Clevis Yoke Ends, Clevis Fork Joints etc. | 3/8 x 3 | clevis w/cotter 3/8x3 | 5 |
| ||
| ISSCO | MO | Shaft Collars, & Adjusting Rings | Steel | Black Oxide | 2 x 3 x 11/16 | shaft collar double split | 20 |
|
| ISSCO | MO | Rod Ends, Heim Joints, Rose Joints | Steel | Plain | 1/4 x 3 | forged rod end 1/2 od head x 9/32 thick 1035 steel chicago hdw # c-134 blank | 140 |
|
| ISSCO | MO | Clevis Yoke Ends, Clevis Fork Joints etc. | Steel | Plain | 1/2-20 x 3 | clevis yoke 2708-6a SAE 1/2-20 x 3 oal | 80 |
|
| ISSCO | MO | Clevis Yoke Ends, Clevis Fork Joints etc. | Steel | Zinc/Yellow | 1/2-13 x 3 | clevis yoke 2708-6a SAE 1/2-13 x 3 oal | 60 |
|
| B & K FAST | PA | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 2 13/16 x 3 | 2 13/16 x 3 rubber o rings #149 buna-n | 15 |
|
| QFC | TX | Grease Fittings | 1/4-28 x 3 | grease fitting flush 1/4-28unf cs z3 | 200 |
| ||
| BHAM | AL | Clevis Yoke Ends, Clevis Fork Joints etc. | Steel | Zinc/Clear | 1/2-13 x 3 | adjustable yoke end w pin zn | 105 |
|
| BHAM | AL | Clevis Yoke Ends, Clevis Fork Joints etc. | 1/2-13 x 3 | adjustable yoke end | 77 |
| ||
| MSTC | MA | O-Rings & Quad Ring Seals (X-Rings) | 233 x 3 | 233 x 3 viton o ring | 1 |
| ||
| MSTC | MA | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 26.2 x 3 | 26.2 x 3 70 durometer nitrile orings | 1 |
|
| MSTC | MA | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 47 x 3 | 47 x 3 70 durometer nitrile orings | 1 |
|
| MSTC | MA | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 28 x 3 | 28 x 3 70 durometer nitrile orings | 2 |
|
| MSTC | MA | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 280.0 x 3 | 280.0 x 3 70 durometer nitrile orings | 8 |
|
| MSTC | MA | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 46 x 3 | 46 x 3 70 durometer nitrile orings | 9 |
|
| MSTC | MA | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 155 x 3 | 155 x 3 70 durometer nitrile orings | 9 |
|
| MSTC | MA | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 190 x 3 | 190 x 3 70 durometer nitrile orings | 10 |
|
| MSTC | MA | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 148 x 3 | 148 x 3 70 durometer nitrile orings | 12 |
|
| MSTC | MA | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 124 x 3 | 124 x 3 70 durometer nitrile orings | 15 |
|
| MSTC | MA | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 22.2 x 3 | 22.2 x 3 70 durometer nitrile orings | 15 |
|
| MSTC | MA | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 45 x 3 | 45 x 3 70 durometer nitrile orings | 21 |
|
| MSTC | MA | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 132 x 3 | 132 x 3 70 durometer nitrile orings | 21 |
|
| MSTC | MA | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 90 x 3 | 90 x 3 70 durometer nitrile orings | 23 |
|
| MSTC | MA | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 32.2 x 3 | 32.2 x 3 70 durometer nitrile orings | 23 |
|
| MSTC | MA | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 30.2 x 3 | 30.2 x 3 70 durometer nitrile orings | 25 |
|
| MSTC | MA | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 39.2 x 3 | 39.2 x 3 70 durometer nitrile orings | 26 |
|
| MSTC | MA | O-Rings & Quad Ring Seals (X-Rings) | 15 x 3 | 15 x 3 viton o ring | 34 |
| ||
| MSTC | MA | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 100 x 3 | 100 x 3 70 durometer nitrile orings | 35 |
|
| MSTC | MA | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 17 x 3 | 17 x 3 70 durometer nitrile orings | 37 |
|
| SRF | AL | O-Rings & Quad Ring Seals (X-Rings) | 1/16 x 3 x 3 1/8 | 1/16 thk x 3 x 3 1/8 od o-ring | - |
| ||
| SRF | AL | O-Rings & Quad Ring Seals (X-Rings) | 3/32 x 3 x 3 3/16 | 3/32 thk x 3 id x 3 3/16 od o-ring | - |
| ||
| SRF | AL | O-Rings & Quad Ring Seals (X-Rings) | 3/16 x 3 x 3 3/8 | 3/16 thk x 3 id x 3-3/8 od o-ring | - |
| ||
| SRF | AL | O-Rings & Quad Ring Seals (X-Rings) | 3/16 x 3 x 3 3/8 | 3/16 thk x 3 id x 3-3/8 od viton o-ring | - |
| ||
| API | IA | Clevis Yoke Ends, Clevis Fork Joints etc. | 1 1/8-12 x 3 x 1 5/8 | nut fold assist clevis thick | 71 |
| ||
| THRDFAST | FL | Rod Ends, Heim Joints, Rose Joints | 1/2 x 3 | b7 forged rod end | 2 |
| ||
| THRDFAST | FL | Ball Bearings, Balls, Bearing Mounts | 1/2 x 3 | 1/2 drivex3 extension w/friction ball | 2 |
| ||
| THRDFAST | AL | Rod Ends, Heim Joints, Rose Joints | 1/4 x 3 | forged rod end | 3 |
| ||
| THRDFAST | AL | Ball Bearings, Balls, Bearing Mounts | 1/2 x 3 | 1/2 drivex3 extension w/friction ball | 2 |
| ||
| All Size | TX | Ball Bearings, Balls, Bearing Mounts | 1/4 x 3 | 1/4 x 3 carbide end mill se 4fl ball nose center cut tiain coated | 6 |
| ||
| Wurth | IN | Clevis Yoke Ends, Clevis Fork Joints etc. | Steel | Zinc/Yellow | 1/2-13 x 3 | 1/2-13 x 3 clevis yoke zinc yellow per print 70937465 rev 03 pack 13 per poly bag | 148 |
|
| Valley Nu | WA | O-Rings & Quad Ring Seals (X-Rings) | 2 3/4 x 3 x 1/8 | 2-3/4 idx3 odx1/8 cs o-ring | 4 |
| ||
| Valley Nu | WA | O-Rings & Quad Ring Seals (X-Rings) | 2 3/4 x 3 x 1/8 90 | 2-3/4 idx3 odx1/8 cs o-ring 90 durometer | 4 |
| ||
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
