.png){kind=spacer}
FCH Member Advertisement
FCH News
5/16 Power Transmission
159 results, (click on any line for more information)
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| METRO IND | OH | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 5/16 x 1/16 | o-ring id/cross sec #11 buna-n | 448 |
|
| MTP | CA | O-Rings & Quad Ring Seals (X-Rings) | 5/16 x 1/16 | 5/16 x 1/16 an 568-o-ring viton fluoroelastomer 75a durometer #011 250/ | stock |
| ||
| MTP | CA | O-Rings & Quad Ring Seals (X-Rings) | 5/16 x 1/16 | 5/16 x 1/16 an 568-o-ring viton fluoroelastomer 75a durometer #011 250/ | stock |
| ||
| MTP | CA | O-Rings & Quad Ring Seals (X-Rings) | 5/16 x 1/16 | 5/16 x 1/16 an 568-o-ring viton fluoroelastomer 75a durometer #011 250/ | stock |
| ||
| AEROSPCE | MN | O-Rings & Quad Ring Seals (X-Rings) | Plain | 5/16 x 1/16 | as568-011 5/16 id x 1/16 cs o-ring per mil spec m83248/1 | 1000 |
| |
| F. Solutions | OH | Shaft Collars, & Adjusting Rings | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16 x .1248 x .180 | shaft collar 5/16 od x .1248 id x .180 thick 1/8 shaft size w/set screw 303 ss | | 30 |
|
| METRO IND | OH | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 5/16 x 1/8 | o-ring id/cross sec 203 buna-n | 950 |
|
| Mansco | MI | Ball Bearings, Balls, Bearing Mounts | Nylon (Polyamide) | Plain | 5/16 x .140 double flanged snap bearing nylon | 16 |
| |
| MidStates | SC | O-Rings & Quad Ring Seals (X-Rings) | 5/16 x 3/16 x 1/16 | 5/16 x 3/16 x 1/16 o-ring | 204 |
| ||
| WDMB | IA | Grease Fittings | 5/16 x 1/4 | fit grease prs in st (zi) 5/16x1/4 drw (W020) (W020) | 4,794 |
| ||
| AFI | FL | Ball Bearings, Balls, Bearing Mounts | Plain | 5/16 x 3/8 x 1/4 | 5/16x3/8x1/4 sae 841 sleeve bearing () | 2500 |
| |
| YANKEE | NH | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 5/16 x 7/16 | 5/16 x 7/16 o ring buna-n 1/16 thick | 433 |
|
| OneMonroe | NC | O-Rings & Quad Ring Seals (X-Rings) | Plain | 5/16 x 7/16 | 5/16 x 7/16 o-ring | 150 |
| |
| YANKEE | NH | O-Rings & Quad Ring Seals (X-Rings) | 5/16 x 7/16 | oring viton | 703 |
| ||
| WDMB | IA | Ball Bearings, Balls, Bearing Mounts | Silicon Bronze | Painted | 5/16 x 7/16 x 3/8 | bearing bronze (pl) 5/16x7/16x3/8 (W020) | 5,286 |
|
| Endries | WI | O-Rings & Quad Ring Seals (X-Rings) | Plain | 5/16 x 7/16 | 2-011 5/16x7/16 fda appr o-ring | 1950 |
| |
| Valley Nu | WA | O-Rings & Quad Ring Seals (X-Rings) | 5/16 x 7/16 x 1/16 | 5/16 idx7/16 odx1/16 cs o-ring | 8 |
| ||
| Catalina | AZ | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 5/16 x 7/16 x 1/16 | 568-011 nitrile 70 durometer o-ring () () | 2220000 |
|
| Endries | WI | Machine Bushings | Silicon Bronze | Plain | 5/16 x 7/16 x 3/8 | 5/16 idx7/16 odx3/8 flange sleve bushing brz | 29 |
|
| NutsBolts | NE | O-Rings & Quad Ring Seals (X-Rings) | 5/16 x 7/16 x 1/16 | 5/16 x 7/16 x 1/16 o-ring-011 | 491 |
| ||
| Liberty | IL | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 5/16 x 7/16 x 1/16 | 5/16 idx7/16odx1/16 thick nitrile o-ring | 1,500 |
|
| IPC | VA | Machine Bushings | 5/16 x 7/16 x 1 | 5/16 idx7/16 odx1 long bushing 841 oil impregnated | 235 |
| ||
| IPC | VA | Machine Bushings | 5/16 x 7/16 x 1/4 | 5/16 idx7/16 odx1/4 long bushing 841 oil impregnated | 305 |
| ||
| SWACO | OH | O-Rings & Quad Ring Seals (X-Rings) | Steel | Black Oxide | 5/16 x 7/16 | o-ring 5/16x7/16 (.070) 70d blk | 4265 |
|
| Mansco | MI | Ball Bearings, Balls, Bearing Mounts | Plain | 5/16 id x 7/16 long nyliner flanged bearing (5l7-f) | 961 |
| ||
| American | WI | Ball Bearings, Balls, Bearing Mounts | Plain | 5/16 x 7/16 x 1/4 | 5/16 id x 7/16 od x 1/4 long sleeve bearing oilite | 1100 |
| |
| OneMonroe | NC | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 5/16 x 1/2 x 0.094 | #109 5/16 id x 1/2 od 0.094 cross section nitrile standard o-ring | 100 |
|
| OneMonroe | NC | Machine Bushings | Plain | 5/16 x 1/2 x 1 7/8 | 5/16x1/2x1-7/8plain bush. | 280 |
| |
| Endries | WI | Ball Bearings, Balls, Bearing Mounts | Plastic | Plain | 5/16 x 1/2 | psi-0506-08 5/16x1/2 3/8 round plastic sleeve bearing (igus only) | 1100 |
|
| Ababa | CA | O-Rings & Quad Ring Seals (X-Rings) | 5/16 x 1/2 x .103 | 5/16 id x 1/2 od x .103 c..s silicone o-ring | 1000 |
| ||
| Hayes | CA | O-Rings & Quad Ring Seals (X-Rings) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 1/2 | 5/16-18 x 1/2 p-pan seel scr w/viton oring 18-8ss | 56 |
|
| AFI | FL | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 5/16 x 1/2 x 3/32 | 5/16x1/2x3/32 x-pro o-ring buna-n-70 () | 929 |
|
| Marshall | MI | Shaft Collars, & Adjusting Rings | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16 x 5/8 | 5/16x5/8 shaft set collar stainless | 25 |
|
| OneMonroe | NC | Machine Bushings | Plain | 5/16 x .690 x 0.750 | 5/16x.690x0.750 oillite bushing per print 626407 | 2332 |
| |
| Mansco | MI | Shaft Collars, & Adjusting Rings | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 5/16 x 11/16 x 5/16 | 5/16 idx11/16 odx5/16 thk single split shaft collar 18-8 304 | 100 |
| |
| OneMonroe | NC | Clevis Yoke Ends, Clevis Fork Joints etc. | Plain | 5/16 x 3/4 | 5/16 x 3/4 yoke pin | 100 |
| |
| Endries | WI | Machine Bushings | 5/16 x 3/4 x 3/4 | 5/16 idx3/4 odx3/4l press-fit drill bushing | 1 |
| ||
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Plain | 5/16 x 29/32 | 5/16 x 29/32 ball bearing | 2312 |
| |
| Endries | WI | Rod Ends, Heim Joints, Rose Joints | Steel | Zinc/Clear | 5/16-24 x 1.375 | 5/16-24x1.375 female rod end self-lube v-srs plated housing | 194 |
|
| Raw Produ | NJ | Clevis Yoke Ends, Clevis Fork Joints etc. | Steel | Plain | 5/16-18 x 1 1/2 | rod ends machined c1030-1035 carbon steel 5/16-18 x 1-1/2 2aa-mach | 200 |
|
| Century | FL | Clevis Yoke Ends, Clevis Fork Joints etc. | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Zinc/Clear | 5/16 x 1 1/2 | 98330a170 5/16 x 1 1/2 adjust clevis pi steel/zinc | 10 |
|
| Field Fas | IL | O-Rings & Quad Ring Seals (X-Rings) | Plain | 5/16 x 1 1/2 | 1 5/16 x 1 1/2 o-ring 3/32 c.s. 75 durometer brown viton | 1730 |
| |
| OneMonroe | NC | Clevis Yoke Ends, Clevis Fork Joints etc. | Plain | 5/16 x 1 3/4 | 5/16 x 1-3/4 yoke pin | 104 |
| |
| Sonfast | PA | Clevis Yoke Ends, Clevis Fork Joints etc. | 5/16 x 1 3/4 | 5/16x1-3/4 drilled clevis print 4771-263 clpz-0312-1750 | 1,600 |
| ||
| Field Fas | IL | Rod Ends, Heim Joints, Rose Joints | Steel | Zinc/Clear | 5/16-24 x 1.81 | 5/16-24 x 1.81 female tie rod end w/5/16 through per print hole stl zc | 761 |
|
| NutsBolts | NE | Shaft Collars, & Adjusting Rings | 5/16 x 2 | 5/16 2pc set collar black | 41 |
| ||
| OneMonroe | NC | Clevis Yoke Ends, Clevis Fork Joints etc. | Plain | 5/16-24 x 2 1/4 | 5/16-24 x 2-1/4 adjustable yoke end | 30 |
| |
| ISSCO | MO | Clevis Yoke Ends, Clevis Fork Joints etc. | Steel | Zinc/Clear | 5/16-18 x 2 1/4 | clevis yoke 2708-3a SAE plate 5/16-18 x 2-1/4 oal | 169 |
|
| ASFCORP | MI | Clevis Yoke Ends, Clevis Fork Joints etc. | Steel | Zinc/Clear | 5/16-24 x 2 1/4 | 5/16-24 x 2-1/4 in forged steel adj female yoke end tri zinc fe/zn 5 at per astm f1941 | 1 |
|
| FastWare | Sask | Clevis Yoke Ends, Clevis Fork Joints etc. | Steel | Zinc/Yellow | 5/16-24 x 2 1/4 | nf yoke end forged | 109 |
|
| OneMonroe | MA | Clevis Yoke Ends, Clevis Fork Joints etc. | Plain | 5/16-24 x 2 1/4 | 5/16-24 x 2-1/4 adjustable yoke end | 30 |
| |
| Ababa | CA | Rod Ends, Heim Joints, Rose Joints | 5/16 x 3 | 5/16 x 3 forged rod end | 4 |
| ||
| WDMB | IA | Rod Ends, Heim Joints, Rose Joints | Steel | Black Oxide | 5/16-18 x 4 | rod end solid st (bo) 5/16-18x4 drw (W0T0) (W050) | 93 |
|
| Alma Bolt | MI | Pulleys & Sheaves | Plain | 5/16-18 x 6 | 5/16-18 x 6 | pulley tap | 1 |
| |
| Jay-Cee | MI | Ball Bearings, Balls, Bearing Mounts | 5/16-18 | bearing set | inquire |
| ||
| OneMonroe | MN | Ball Bearings, Balls, Bearing Mounts | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 | ball style ss 5/16-18 orange | 219 |
|
| OneMonroe | MN | Grease Fittings | Plain | 5/16 | 5/16 screw type grease zerk | 1000 |
| |
| B & K FAST | PA | Rod Ends, Heim Joints, Rose Joints | 5/16-24 | 5/16-24 rod end-right hand | 4 |
| ||
| METRO IND | OH | Grease Fittings | Plain | 5/16-24 | 5/16-24 grease fit. straight | 105 |
| |
| METRO IND | OH | Clevis Yoke Ends, Clevis Fork Joints etc. | Plain | 5/16-24 | 5/16-24 clevis yoke | 9 |
| |
| METRO IND | OH | Ball Bearings, Balls, Bearing Mounts | Steel | Plain | 5/16 | 5/16 ball steel | 5 |
|
| METRO IND | OH | Rod Ends, Heim Joints, Rose Joints | Plain | 5/16-24 | 5/16-24 male rod end ball joint | 4 |
| |
| METRO IND | OH | Rod Ends, Heim Joints, Rose Joints | Plain | 5/16-24 | 5/16-24 female lh rod end ball joint | 1 |
| |
| Ababa | CA | Clevis Yoke Ends, Clevis Fork Joints etc. | 5/16 | 5/16 clevis safety hook grade 70 | 4 |
| ||
| Ababa | CA | Clevis Yoke Ends, Clevis Fork Joints etc. | 5/16-24 | 5/16-24 (#52) adjustable drop forged yoke end | 4 |
| ||
| Ababa | CA | Clevis Yoke Ends, Clevis Fork Joints etc. | Steel | Plain | #5/16 | #5/16 (#62) plain type-drop forged yoke end | 3 |
|
| American | NY | Shaft Collars, & Adjusting Rings | 5/16 | split hi-collar lockwasger | 7000 |
| ||
| Jackson | MS | Grease Fittings | Steel | Zinc/Yellow | 5/16-24 straight grease fitting individual-zinc yellow | 21 |
| |
| YANKEE | NH | Clevis Yoke Ends, Clevis Fork Joints etc. | 5/16-24 | 5/16-24 yoke end | 12 |
| ||
| RePneu To | MI | Ball Bearings, Balls, Bearing Mounts | 5/16-24 | 5/16-24 rod end ball joint | 100 |
| ||
| Weaver | WA | Shaft Collars, & Adjusting Rings | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16 | 5/16 set collar 18-8 ss | 60 |
|
| OneMonroe | NC | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | 5/16-3/8 | 0.091 dia. x 1-7/8 zinc finish bow tie cotter pin for 5/16-3/8 shaft | 12 |
|
| OneMonroe | NC | Clevis Yoke Ends, Clevis Fork Joints etc. | Plain | 5/16 | 5/16 double clevis link | 6 |
| |
| OneMonroe | NC | Clevis Yoke Ends, Clevis Fork Joints etc. | Plain | 5/16-18 | adjustable yoke end with special 5/16-18 thread | 54 |
| |
| OneMonroe | NC | Clevis Yoke Ends, Clevis Fork Joints etc. | Plain | 5/16-24 | adj. yoke with eyes hardened & 5/16-24 thread (clark 556413) | 151 |
| |
| OneMonroe | NC | Clevis Yoke Ends, Clevis Fork Joints etc. | Plain | 5/16-24 | adjustable yoke end with special 5/16-24 thread | 6 |
| |
| OneMonroe | NC | Clevis Yoke Ends, Clevis Fork Joints etc. | Plain | 5/16-18 | plain yoke end with 5/16-18 thread | 256 |
| |
| OneMonroe | NC | Grease Fittings | Steel | Zinc/Clear | 5/16 | 1 series brake axle & nut 5/16 diameter x 1-5/8 length zinc plated solid axle w/ no zerk. | 46 |
|
| OneMonroe | NC | Clevis Yoke Ends, Clevis Fork Joints etc. | Plain | 5/16-3/8 | 5/16-3/8 double clevis link | 6 |
| |
| OneMonroe | NC | Grease Fittings | Plain | 5/16-24 | 5/16in-24 st. grease fitting | 53 |
| |
| OneMonroe | MN | Grease Fittings | Plain | 5/16 | 5/16 screw type grease zerk | 1000 |
| |
| OneMonroe | MN | Ball Bearings, Balls, Bearing Mounts | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 | ball style ss 5/16-18 orange | 219 |
|
| OneMonroe | NC | Ball Bearings, Balls, Bearing Mounts | Silicon Bronze | Plain | 5/16 | oil-embedded bronze sleeve bearing for 5/16 sha ft diameter for 1/2 housing id 9/16 long | 200 |
|
| B & K FAST | PA | Shaft Collars, & Adjusting Rings | 5/16 | 5/16 one piece set collars | 59 |
| ||
| B & K FAST | PA | Clevis Yoke Ends, Clevis Fork Joints etc. | 5/16-24 | 5/16-24 yoke end right hand 2 1/4 long | 2 |
| ||
| Jay-Cee | MI | Ball Bearings, Balls, Bearing Mounts | 5/16-18 | bp-bbs518 bearing | inquire |
| ||
| QFC | TX | Shaft Collars, & Adjusting Rings | Steel | Zinc/Clear | 5/16 | 5/16 hi-collar lock washr zinc | 2006 |
|
| Jackson | MS | Grease Fittings | 5/16-24 | 5/16-24 unf threads 45 degree grease fitting individual oal .83 sae j534 h1712 | 25 |
| ||
| YANKEE | NH | Shaft Collars, & Adjusting Rings | 5/16 | 5/16 collar shaft 1pc clamp type | 97 |
| ||
| R&S Indus | OR | Grease Fittings | Plain | 5/16-18 | 5/16-18 90 degree grease zerk | 29 |
| |
| Endries | WI | Grease Fittings | Brass | Plain | 5/16-24 | 5/16-24 female x 1/8 npt male c36000 brass lube adapter | 5000 |
|
| ACF | CA | Ball Bearings, Balls, Bearing Mounts | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16 | 5/16 s/s ball | 100 |
|
| Endries | WI | Ball Bearings, Balls, Bearing Mounts | Plain | 5/16 | 99880 5/16 carbide 2 flute ball spoon endmill zrn (htc only) | 3 |
| |
| Purchase | MO | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 5/16 | 5/16 buna-n o-ring (70 durometer) .297-.306 id .441 od .067-.073 thk black | 1000 |
|
| Valley Nu | WA | Clevis Yoke Ends, Clevis Fork Joints etc. | 5/16-24 | nf SAE dorman brake yokes | 7 |
| ||
| OBRIEN | OH | Ball Bearings, Balls, Bearing Mounts | Steel | 5/16 | carbon ball 1010-1020 rockwell c60 | 244 |
| |
| IRF | NJ | Shaft Collars, & Adjusting Rings | Steel | Zinc/Clear | 5/16 | 5/16 standard shaft collar zinc | 500 |
|
| IRF | NJ | Shaft Collars, & Adjusting Rings | Steel | Zinc/Clear | 5/16 | flange collar | 54500 |
|
| IRF | NJ | Shaft Collars, & Adjusting Rings | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16 | flanged collar 18-8 304 | 835 |
|
| IRF | NJ | Shaft Collars, & Adjusting Rings | Steel | Zinc/Yellow | 5/16 | standard flange collar /w lok | 200 |
|
| IRF | NJ | Shaft Collars, & Adjusting Rings | Steel | Zinc/Yellow | 5/16 | standard flange collar | 9800 |
|
| IRF | NJ | Shaft Collars, & Adjusting Rings | Steel | Zinc/Yellow | 5/16 | standard flange collar | 9800 |
|
| IRF | NJ | Shaft Collars, & Adjusting Rings | Steel | Zinc/Clear | 5/16 | 5/16 steel flange collar zinc | 41,500 |
|
| Endries | WI | Ball Bearings, Balls, Bearing Mounts | Steel | Zinc/Clear | 5/16 | 1608-b 5/16 drive straight grease fitting trivalent clear zinc w/ball chk | 1076 |
|
| BoltCraft | NE | Grease Fittings | Steel | Zinc/Clear | 5/16 | 5/16 drive in plated grease zerks | inquire |
|
| NutsBolts | NE | Shaft Collars, & Adjusting Rings | Steel | Zinc/Clear | 5/16 | 5/16 one piece set collar zp | 11 |
|
| NutsBolts | NE | Clevis Yoke Ends, Clevis Fork Joints etc. | 5/16-24 | 5/16-24 sae yoke end | 28 |
| ||
| NutsBolts | NE | Grease Fittings | 5/16 | 5/16 drive grease zerk | 1000 |
| ||
| NutsBolts | NE | Grease Fittings | 5/16 | 5/16 drive grease zerk with ball check | 4324 |
| ||
| Cal Fastenrs | CA | Ball Bearings, Balls, Bearing Mounts | Nylon (Polyamide) | 5/16 | diameter ball | 500 |
| |
| Jackson | MS | Shaft Collars, & Adjusting Rings | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 5/16 | set collar 18-8 304 single split #s1-031-ssa | 16 |
| |
| Jackson | MS | Shaft Collars, & Adjusting Rings | Steel | Zinc/Clear | 5/16 | double split set collar | 33 |
|
| Jackson | MS | Shaft Collars, & Adjusting Rings | Steel | Zinc/Clear | 5/16 | set collar | 285 |
|
| Jackson | MS | Clevis Yoke Ends, Clevis Fork Joints etc. | Steel | Zinc/Yellow | 5/16-24 | nf yoke | 1234 |
|
| General F | MI | Ball Bearings, Balls, Bearing Mounts | 5/16 | 5/16 thread flange 150# pipe fitting | 4 |
| ||
| IRF | NC | Shaft Collars, & Adjusting Rings | Steel | Zinc/Clear | 5/16 | 5/16 standard shaft collar zinc | 6 |
|
| IRF | NC | Shaft Collars, & Adjusting Rings | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16 | 5/16 flanged collar 18-8 304 steel | 835 |
|
| ASFCORP | MI | Shaft Collars, & Adjusting Rings | Steel | Black Oxide | 5/16 | 5/16 in set scw shaft collar blk ox pkg | 437 |
|
| Alma Bolt | MI | Shaft Collars, & Adjusting Rings | 5/16 | with 1 set screw shaft collar | 42 |
| ||
| Liberty | IL | Shaft Collars, & Adjusting Rings | 5/16 | shaft collar | 95 |
| ||
| HBBOLT | CA | Ball Bearings, Balls, Bearing Mounts | 5/16 | t handle ball driver | 3 |
| ||
| HBBOLT | CA | Ball Bearings, Balls, Bearing Mounts | 5/16 | t handle no ball point | 5 |
| ||
| IPC | VA | Grease Fittings | Steel | Plain | 5/16-24 | 5/16-24 straight grease fitting steel 3/8 hex size 21/32 overall length 5/32 shank length | 6,300 |
|
| IPC | VA | O-Rings & Quad Ring Seals (X-Rings) | Rubber, Buna-N, Neoprene etc. | Plain | 5/16-18 | 5/16-18 self sealing nut buna oring steel zinc | 454 |
|
| IPC | VA | Machine Bushings | 5/16 | 5/16 shorty bushing (b 312-250) black | 793 |
| ||
| General F | MI | Clevis Yoke Ends, Clevis Fork Joints etc. | 5/16-24 | 5/16-24 clevis yoke chicago#52 | 61 |
| ||
| A-Plus Co | OR | Grease Fittings | Plain | 5/16 | 5/16 drv str grease zerk | 86 |
| |
| A-Plus Co | OR | Grease Fittings | Plain | 5/16-24 | 5/16-24 90 deg. grease zerk | 50 |
| |
| A-Plus Co | OR | Grease Fittings | Plain | 5/16-24 | 5/16-24 nf str grease zerk | 38 |
| |
| Hayes | CA | Shaft Collars, & Adjusting Rings | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16 | 5/16 single split collar 18-8ss | 4 |
|
| NAPPCO | TX | Ball Bearings, Balls, Bearing Mounts | 5/16 | 5/16 ceramic ball | 1000 |
| ||
| MidStates | MI | Shaft Collars, & Adjusting Rings | Steel | 5/16-24 | threaded shaft collar | 19 |
| |
| OSSCO | RI | Grease Fittings | 5/16 | 5/16 drive grease fitting | 50 |
| ||
| OSSCO | RI | Shaft Collars, & Adjusting Rings | 5/16 | 5/16 solid single set shaft collar | 68 |
| ||
| NutsBolts | NE | Ball Bearings, Balls, Bearing Mounts | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-24 | 5/16-24 swivel ball joint q/d ss | 3459 |
|
| Century | FL | Ball Bearings, Balls, Bearing Mounts | Steel | Plain | 5/16 | parker 5/16 precision ball q2b steel spherical to +/-.00005 min | 1350 |
|
| Valley Nu | WA | Clevis Yoke Ends, Clevis Fork Joints etc. | Steel | 5/16 | a a ht clevis slip hk orange | 1 |
| |
| Olander | CA | Turned, Ground & Polished Shafting | Steel | Zinc/Clear | hair spring cotter stl zn 5/16-3/8 shaft | 552 |
| |
| Olander< /td> | CA | Ball Bearings, Balls, Bearing Mounts | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 5/16-18ba | 5/16-18 ball plung nonlocking ss/ss ball () () | 290 |
| |
| Alma Bolt | MI | Turned, Ground & Polished Shafting | Plain | 5/16 | 5/16 shaft x .047 wire | rue ring locking cotter | 80 |
| |
| Olander | CA | Ball Bearings, Balls, Bearing Mounts | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 5/16 | 5/16 push-fit plung ss/ss ball () () | 8 |
| |
| Alma Bolt | MI | Ball Bearings, Balls, Bearing Mounts | Plain | 5/16-24 | #12040 5/16-24 ball joint asse | au-ve-co part | 1 |
| |
| Alma Bolt | MI | Shaft Collars, & Adjusting Rings | Plain | 5/16 | 1 5/16 with 1 set screw | shaft collar | 10 |
| |
| Mansco | MI | Turned, Ground & Polished Shafting | Nickel Plated | 5/16 cap nut unthreaded shaft nickel | 889 |
| ||
| Alma Bolt | MI | Ball Bearings, Balls, Bearing Mounts | Plain | 5/16-24 | #13584 5/16-24 ball joint | au-ve-co part | 26 |
| |
| Valley Nu | WA | Clevis Yoke Ends, Clevis Fork Joints etc. | Steel | Zinc/Black | 5/16 | clevis grab hk zb boxed | 2 |
|
| Alma Bolt | MI | Pulleys & Sheaves | Plain | 5/16 | 5/16 single sheave pully #03068 | 1 |
| |
| Olander | CA | Ball Bearings, Balls, Bearing Mounts | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 5/16-18ba | 5/16-18 ball plung nonlocking ss/ss ball () () | 4 |
| |
| Marshall | null | 5/16 | 5/16 set screw shaft collar s/ | 305 |
| |||
| Arden | WI | Ball Bearings, Balls, Bearing Mounts | 5/16 | 5/16 ball bearing per polaris | inquire |
| ||
| National | Ont | Ball Bearings, Balls, Bearing Mounts | Plain | 5/16 | 5/16/m8 bearing set al/ak/ah | 2 |
| |
| Olander | CA | Ball Bearings, Balls, Bearing Mounts | Steel | 5/16-18ba | 5/16-18 ball plung locking stl/ss ball () () | 35 |
| |
| Olander | CA | Ball Bearings, Balls, Bearing Mounts | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 5/16-18ba | 5/16-18 ball plgr locking ss/nyl ball () () | 12 |
| |
| AIH | AZ | Ball Bearings, Balls, Bearing Mounts | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16 | 5/16 ball bearing s/s | 71 |
|
| Alma Bolt | MI | Shaft Collars, & Adjusting Rings | Plain | 5/16 | 1 5/16 with 1 set screw | shaft collar | 19 |
| |
| NutsBolts | NE | Turned, Ground & Polished Shafting | Plain | 5/16 | push nut cap for 5/16 unthreaded shaft | 700 |
| |
| Alma Bolt | MI | Shaft Collars, & Adjusting Rings | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16 | 1 5/16 | stainless steel set collar | 1 |
|
| Olander | CA | Ball Bearings, Balls, Bearing Mounts | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 5/16-18ba | 5/16-18 ball plung locking sst/sst () () | 10 |
| |
| Olander | CA | Ball Bearings, Balls, Bearing Mounts | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 5/16-18ba | 5/16-18 ball plung locking ss/ss ball () () | 45 |
| |
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
