FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Jackson | MS | Strut Systems (Channels, Clamps, Hangers, etc.) | Plain | 3/4 x 6 | 3/4 x 6 oal coil tie 2 strut coupler plain finish | 14 |
| |
| OneMonroe | MN | Hinges | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 4 | 4 inch strap hinge-ss | 29 |
| |
| OneMonroe | MN | Springs (Compression) | compression spring #gde51-j | 38 |
| |||
| OneMonroe | MN | Hinges | guden lift off hinge-female | 200 |
| |||
| OneMonroe | MN | Hinges | guden lift off hinge-male | 194 |
| |||
| OneMonroe | MN | Latches & Catches | swell latch exposed head southco 19-91-10 | 30 |
| |||
| OneMonroe | MN | Knobs & Star Grips | Steel | Zinc/Clear | spring latch knurled knob steel zinc equal to southco 57-10-201-10 | 24 |
| |
| OneMonroe | MN | Latches & Catches | southco panel latch #e5-1-125-111 | 18 |
| |||
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | 3/8-16 | 3/8-16 adj hex head leveler 1.5 long | 721 |
| ||
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | Steel | Plain | 3/8-16 | 3/8-16 adj leveler .875 hex head 2.5 long steel plain | 350 |
|
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | Steel | Zinc/Clear | 5/16-18 | 5/16-18 adj hex head leveler-1.5 long steel/zinc | 5 |
|
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | swivel plate caster | 8 |
| |||
| OneMonroe | MN | Latches & Catches | southco draw latch | 1 |
| |||
| OneMonroe | MN | Latches & Catches | Steel | Zinc/Clear | rotary latch junior zinc | 9 |
| |
| OneMonroe | MN | Latches & Catches | Steel | Zinc/Clear | rotary latch junior zinc | 8 |
| |
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | swivel plate caster | 8 |
| |||
| OneMonroe | MN | Hinges | hinge | 180 |
| |||
| OneMonroe | MN | Brackets & Supports | skirt mounting bracket | 60 |
| |||
| OneMonroe | MN | Latches & Catches | southco rotary latch | 28 |
| |||
| OneMonroe | MN | Latches & Catches | latch | 2 |
| |||
| OneMonroe | MN | Knobs & Star Grips | 1/4-20 x 2.75 | 1.75 pp 1/4-20 x 2.75 knob | 55 |
| ||
| RCFast | AZ | Protective Caps & Plugs | Plastic | Black Oxide | M3 x 12 | soc cap w/360 deg nylon patch 2-3 thrds from end for 5-6 thrds a2 ss black ox usa | 50 |
|
| RCFast | AZ | Protective Caps & Plugs | Plastic | Black Oxide | M4 x 12 | soc cap w/360 deg nylon patch (start 4 thrds from end .16 long) black ox (usa) | 29 |
|
| RCFast | AZ | Protective Caps & Plugs | Plastic | M3 x 8 | flat soc cap w/360 deg nylon patch 3-6 thrds long, 2-3 thrds from end a2 ss (usa) | 240 |
| |
| RCFast | AZ | Protective Caps & Plugs | Plastic | Black Oxide | M4 x 8 | flat soc cap w/360 deg nylon patch 2-3 thrds from end for 5-6 thrds a2 ss black ox usa | 1915 |
|
| RCFast | AZ | Grommets & Eyelets | grommet, 7/32id x 3/32grv wdth x 11/32 grv dia .515 dia x 13/32l 60 durometer | 500 |
| |||
| ACCURATE | IL | Protective Caps & Plugs | 3/8 x 6 | 1/4 & 3/8 x 6 thread protector yellow (made in usa) | 9345 |
| ||
| ACCURATE | IL | Protective Caps & Plugs | Plain | #10-24 x 5/8 | 10-24x5/8 coarse button head cap sc plain (alloy) | 1100 |
| |
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | caster component 637 threaded stem | 12 |
| |||
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | oakland cal caster-100601 | 1200 |
| |||
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | oakland cal caster-100601 | 726 |
| |||
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | Nickel Plated | 1.25 | leveler1.25 in base3/8-16x2 nkl | 50 |
| |
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | 2 1/2 | leveler2-1/2 in base diam5/8-11x2 1200 | 2 |
| ||
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | 4 x 5/8 11 x 5.9 | leveler4 dia5/8-11x5.9flats2250# | 21 |
| ||
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | Steel | Zinc/Clear | leveler (3/4-10 x 4 ) low profile/zinc plated steel/1-1/16 hex/6000# | 8 |
| |
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | M10 | steel level mount w/stud m10 | 25 |
| ||
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | oakland cal caster-130202 | 3 |
| |||
| Ababa | CA | Storage Bins | akro mills bin divider for 30-150/30-158/30-184 | 3 |
| |||
| Ababa | CA | License Plate Hardware | Steel | Zinc/Clear | #14 x 3/4 | 14 x 3/4 hx wsh znc license plate screw (10/pk) | 1 |
|
| YANKEE | NH | Storage Bins | 106 | quantum bin divier - 6 - black - works with qsb102, qsb104, qsb106 | 1316 |
| ||
| Express | CA | Brackets & Supports | 2 | 2 hole 90 degree angle bracket (holes fit 3/8 ) | 100 |
| ||
| Express | CA | Nails | 16 x 2 | 16x2 drive nail | 40370 |
| ||
| Express | CA | Strut Systems (Channels, Clamps, Hangers, etc.) | Steel | Galvanized | 1 5/8 x 1 5/8 | 1-5/8x1-5/8 non unistrut 12 gage slotted pre galvanized 10 foot | 137 |
|
| Express | CA | Strut Systems (Channels, Clamps, Hangers, etc.) | Steel | Galvanized | 1 5/8 x 1 5/8 | 1-5/8x1-5/8 non unistrut 12 gage slotted pre galvanized 20 foot | 235 |
|
| Express | CA | Hinges | Steel | Galvanized | 4 | 4 hole adjustable hinge electro galvanized | 69 |
|
| Express | CA | Hinges | Steel | Galvanized | 3 | 3 hole adjustable hinge electro galvanized | 26 |
|
| Express | CA | Strut Systems (Channels, Clamps, Hangers, etc.) | 3 1/2 | 3-1/2 single channel post base eg korfit-unistrut | 8 |
| ||
| Express | CA | Protective Caps & Plugs | Plastic | Plain | fitting (end cap) plastic | 485 |
| |
| Express | CA | Strut Systems (Channels, Clamps, Hangers, etc.) | 3 1/2 | 3-1/2 single channel 2-hole post base (straight) eg korfit-unistrut | 17 |
| ||
| Express | CA | Strut Systems (Channels, Clamps, Hangers, etc.) | 3/8-16 channel nut (use with 1 or 13/16 channel depth) eg korfit-unistrut | 3044 |
| |||
| Express | CA | Nails | simpson gas-actuated concrete nailer | 1 |
| |||
| Express | CA | Latches & Catches | master lock breakaway lock-key 197 500kabrk/197 | 33 |
| |||
| Express | CA | Nails | 60 | 60d bright common concrete nail 6/ea = 1 nail | 270 |
| ||
| Express | CA | Handles | 1/2 x 9 | 1/2x9 ratchet drive handle | 10 |
| ||
| Express | CA | Handles | 300 Stainless (A1,A2, 18-8,304,310 etc.) | wire toothbrush-18-8 304 steel wood handle (3x7) | 102 |
| ||
| Express | CA | Handles | Chrome Plated | hardware-schlage nd40s privacy lock sparta handle-626 stain chrome finish | 1 |
| ||
| Express | CA | Handles | Steel | wire hand brush-carbon steel curved wood handle (3x19) | 14 |
| ||
| Express | CA | Brackets & Supports | 4 | 4 hole 45 degree inward angle bracket | 14 |
| ||
| Express | CA | Strut Systems (Channels, Clamps, Hangers, etc.) | Steel | Galvanized | post base electro galvanized-non unistrut | 3 |
| |
| Express | CA | Strut Systems (Channels, Clamps, Hangers, etc.) | u-bolt beam clamp for 3-1/4 2-7/16 or 1-3/4 height single or back-to-back welded channel (for beams with up to 3/4 flange thickness) eg korfit-unistrut | 16 |
| |||
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
