FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| OneMonroe | NC | Hinges | 300 Stainless (A1,A2, 18-8,304,310 etc.) | li ft off hinge-le ft hand stainless-pair | 12 |
| ||
| OneMonroe | NC | Handles | locking handle | 149 |
| |||
| OneMonroe | MN | Hinges | 2 | 2 hinge-left hand | 12 |
| ||
| OneMonroe | NC | Hinges | Steel | Zinc/Clear | 2.00 x 1.00 x .080 x 1.87 | hinge 2.00x1.00x.080x1.87 steel no holes rh female rohs comp. | 20 |
|
| OneMonroe | NC | Hinges | Steel | Zinc/Clear | 2.00 x 1.00 x .080 x 1.87 | hinge 2.00x1.00x.080x1.87 steel no holes rh male rohs comp. | 20 |
|
| OneMonroe | MN | Latches & Catches | pocket door latch-40 4012 | 6 |
| |||
| OneMonroe | MN | Brackets & Supports | 40-5960 | bi parting bracket pair 40-5960 | 5 |
| ||
| OneMonroe | MN | Hinges | 300 Stainless (A1,A2, 18-8,304,310 etc.) | M10 x 115 | pin hinge ss m10 x 115 | 5 |
| |
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | caster | 40 |
| |||
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | 3 | 3 shepard caster | 3 |
| ||
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | Rubber, Buna-N, Neoprene etc. | Plain / Furnace Black | 1/2-13 x 1 | caster swivel threaded stem stm sz 1/2-13unc x 1 wheel sz 4 x 1-1/4 wheel mat black soft rubber bearing plain bore load ht 5-1/8 load cap 165 lbs temp rt-40 to +160 f | 4 |
|
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | oakland cal caster-130202 | 4 |
| |||
| OneMonroe | MN | Protective Caps & Plugs | Steel | Zinc/Clear | 12 x 3 | wheel sz 12 x 3 mat polyurethane on cast iron bearing plain bore bore id 1-15/16 hub length 3-1/4 load cap 3500 lbs temp rt-40 to +180 f | 7 |
|
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | twin wheel caster | 93 |
| |||
| OneMonroe | MN | Handles | 3/4 x 1.5 | t-handle push-button 3/4x1.5 | 31 |
| ||
| OneMonroe | MN | Handles | 1/4 x 1 3/4 | 1/4 x 1-3/4 thandle w/lanyard | 100 |
| ||
| OneMonroe | MN | Springs (Compression) | .970 x .063 | spring compression 2.00 long .970 od .063 wire dia music wire | 100 |
| ||
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | oakland cal caster-130202 | 11 |
| |||
| OneMonroe | MN | Gaskets | two piece locking gasket | 25 |
| |||
| OneMonroe | MN | Gaskets | locking gasket | 71 |
| |||
| Shadran I | Springs (Compression) | 3/4 x 3 | 3/4x3 compression spring | 2 |
| |||
| Shadran I | Springs (Extension) | 5/8 x 5 5/8 | 5/8x5-5/8 extension spring | inquire |
| |||
| Shadran I | Springs (Extension) | 7/16 x 5 | 7/16x5 extension spring | 2 |
| |||
| Shadran I | Springs (Extension) | 3/4 x 7 3/8 | 3/4x7-3/8 extension spring | 3 |
| |||
| Shadran I | Springs (Extension) | 1/2 x 9 | 1/2x9 extension spring | 2 |
| |||
| Shadran I | Springs (Extension) | 13/16 x 10 1/4 | 13/16x10-1/4 extension spring | inquire |
| |||
| Shadran I | Springs (Extension) | 3/4 x 10 1/4 | 3/4x10-1/4 extension spring | 6 |
| |||
| Shadran I | Springs (Extension) | 5/16 x 6 | 5/16x6 extension spring | 6 |
| |||
| Shadran I | Springs (Extension) | 7/16 x 6 3/16 | 7/16x6-3/16 extension spring | 4 |
| |||
| RePneu To | MI | Gaskets | 2-108 | gasket or 2-108 | 10 |
| ||
| RePneu To | MI | Gaskets | 5-052 | gasket or 5-052 | 3 |
| ||
| RePneu To | MI | Gaskets | gasket far | 2 |
| |||
| RePneu To | MI | Gaskets | gasket b-075047 | 4 |
| |||
| RePneu To | MI | Gaskets | gasket b-086055 | 2 |
| |||
| RePneu To | MI | Gaskets | gasket | 10 |
| |||
| RePneu To | MI | Gaskets | gasket or-2-003 far | 2 |
| |||
| RePneu To | MI | Gaskets | 2-016 | gasket or 2-016 | 1 |
| ||
| RePneu To | MI | Gaskets | 2-119 | gasket or 2-119 | 1 |
| ||
| RePneu To | MI | Gaskets | gasket | 1 |
| |||
| Shadran I | Springs (Extension) | 1 3/8 x 7 x .224 | (2) 1-3/8x7x.224 extension spring | inquire |
| |||
| Shadran I | Springs (Extension) | 1/4 x 1 13/32 x .030 | 1/4x1-13/32x.030 extension spring | inquire |
| |||
| RePneu To | MI | Strut Systems (Channels, Clamps, Hangers, etc.) | clamp nut (ng) | 9 |
| |||
| RePneu To | MI | Gaskets | gasket or 104 | 10 |
| |||
| RePneu To | MI | Gaskets | 2-107 | gasket or 2-107 | 10 |
| ||
| RePneu To | MI | Gaskets | gasket or 038 | 4 |
| |||
| RePneu To | MI | Gaskets | gasket or2-106 far | 2 |
| |||
| OneMonroe | MN | Knobs & Star Grips | M6 | knurled knob tap m6 | 12 |
| ||
| OneMonroe | MN | Hinges | 1.5 x 3.00 | 1.5x3.00 flush mount marine hinge | 49 |
| ||
| OneMonroe | MN | Hinges | 1 1/2 x 2 1/2 | 1-1/2 x 2-1/2 loose joint hinge | 12 |
| ||
| OneMonroe | MN | Storage Bins | 18 x 36 | 18 x 36 wall mount lewis bins | 2 |
| ||
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | Steel | leveler (3/4-10 x 8 )/steel/low profile/standard base | 57 |
| ||
| Shadran I | Protective Caps & Plugs | Chrome Plated | M10 | (20) 10mm chrome hole plug | inquire |
| ||
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | oakland cal caster-100601 | 31 |
| |||
| OneMonroe | MN | Knobs & Star Grips | Plastic | Plain / Furnace Black | M10 | plastic knob m10 | 18 |
|
| OneMonroe | MN | Hinges | 300 Stainless (A1,A2, 18-8,304,310 etc.) | stainless steel hinge with 1/2 dia. pin | 30 |
| ||
| OneMonroe | MN | Hinges | 1 3/4 | hinge with weld 1-3/4 exposed pin | 122 |
| ||
| OneMonroe | MN | Hinges | 3/8 | hinge with 3/8 pin | 5 |
| ||
| RePneu To | MI | Latches & Catches | M13.6 | hafele 246.19.101 magnetic catch 2.53.5 kg pull for 13.6 mm drill hole | 302 |
| ||
| Century | O-Rings & Quad Ring Seals (X-Rings) | Steel | Plain / Furnace Black | ms29513-223 nsm packing | 300 |
| ||
| Century | FL | Protective Caps & Plugs | Nylon (Polyamide) | 3/4-16 | caplug rpo-108-black nylon q5a 3/4-16 (3000 per) tier c capplugs capplugs capplugs capplugs | 3100 |
| |
| Century | FL | Protective Caps & Plugs | Plain / Furnace Black | 1.646 x 1.718 x .625 | ms90376-28r | 2582 |
| |
| Century | FL | Machine Mounts, Casters, Leg Levelers | 3/8-16 x 3 3/4 | rocktenn# 0058-1390 leveler 3/8-16 x 3-3/4 hex leveler per print | 2815 |
| ||
| Century | FL | Protective Caps & Plugs | caplug ep-14 pe-ld01 yel002yellow plugs for threaded connectors capplugs capplugs capplugs capplugs | 2214 |
| |||
| Century | FL | Protective Caps & Plugs | Plastic | Plain / Furnace Black | caplug vc-562-16 pvcyel501yellow round vinyl caps capplugs capplugs capplugs capplugs | 1450 |
| |
| Century | FL | Protective Caps & Plugs | 32 | caplugs c-32 red utility cap ldp capplugs capplugs capplugs capplugs | 2500 |
| ||
| Century | FL | Protective Caps & Plugs | T5 | caplug t-5 pe-ld01 red002red tapered caps and plugs capplugs capplugs capplugs capplugs | 2303 |
| ||
| Century | FL | Vibration/Shock Absorbing Mounts, Rubber Bumpers | bumper speciality bs-20 clear square adhesive bumper | 2598 |
| |||
| Century | FL | Protective Caps & Plugs | ms90376-22rf cap dust plstc | 564 |
| |||
| Century | FL | Protective Caps & Plugs | Aluminum | 1/2 | caplug asmasp8gn 1/2 threaded plug aluminum w/gasket asp-8gn q2b capplugs asmasp8gn capplugs asmasp8gn capplugs asmasp8gn capplugs asmasp8gn | 530 |
| |
| TownCountry | AR | Nails | 2 x .113 | wire welded strip nail | 2 |
| ||
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | Steel | Zinc/Clear | 7/8-15/16 | caster swivel expanding adapter stem stm sz 7/8-15/16 wheel sz 5 x 1-1/4 wheel mat gray monotech donut tread bearing precision w/partial thread guard load ht 6-1/8 load cap 300 lbs temp rt-45 to +180 f | 4 |
|
| OneMonroe | MN | Knobs & Star Grips | 300 Stainless (A1,A2, 18-8,304,310 etc.) | ss knurled knob-inch-tap | 3 |
| ||
| OneMonroe | MN | Protective Caps & Plugs | Chrome Plated | 5/16-18 x 3/4 | cstrswiv2in ball polyo 5/16-18x3/4 stm80# cap bright chrome | 18 |
| |
| OneMonroe | MN | Protective Caps & Plugs | Steel | Zinc/Clear | 10 x 3 | wheel sz 10 x 3 mat polyurethane on cast iron bearing plain bore bore id 1-15/16 hub length 3-1/4 load cap 3000 lbs temp rt-40 to +180 f | 4 |
|
| ACCURATE | IL | Protective Caps & Plugs | 3/8 x 6 | 1/4 & 3/8 x 6 thread protector yellow (made in usa) | 7345 |
| ||
| ACCURATE | IL | Protective Caps & Plugs | Plain / Furnace Black | #10-24 x 5/8 | 10-24x5/8 coarse button head cap sc plain (alloy) | 3400 |
| |
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | Rubber, Buna-N, Neoprene etc. | Plain / Furnace Black | 3 x 1 1/4 | caster swivel-threaded stem stm sz 1/2 d-13 x 1-1/2 l wheel sz 3 x 1-1/4 wheel mat quickstart rubber bearing precision ball load ht 4-7/32 load cap 200 lbs | 4 |
|
| OneMonroe | NC | Vibration/Shock Absorbing Mounts, Rubber Bumpers | upright bumper | 3 |
| |||
| RCFast | AZ | Protective Caps & Plugs | Plastic | Black Oxide | M3 x 12 | soc cap w/360 deg nylon patch 2-3 thrds from end for 5-6 thrds a2 ss black ox usa | 50 |
|
| RCFast | AZ | Protective Caps & Plugs | Plastic | Black Oxide | M4 x 12 | soc cap w/360 deg nylon patch (start 4 thrds from end .16 long) black ox (usa) | 29 |
|
| RCFast | AZ | Protective Caps & Plugs | Plastic | M3 x 8 | flat soc cap w/360 deg nylon patch 3-6 thrds long, 2-3 thrds from end a2 ss (usa) | 240 |
| |
| RCFast | AZ | Protective Caps & Plugs | Plastic | Black Oxide | M4 x 8 | flat soc cap w/360 deg nylon patch 2-3 thrds from end for 5-6 thrds a2 ss black ox usa | 1915 |
|
| RCFast | AZ | Grommets & Eyelets | grommet, 7/32id x 3/32grv wdth x 11/32 grv dia .515 dia x 13/32l 60 durometer | 500 |
| |||
| METRO IND | OH | Machine Mounts, Casters, Leg Levelers | M20-2.50 x 70 | m20-2.5 x 70 leveling bolt for hes u1361521-0607 assembly | 32 |
| ||
| METRO IND | OH | Machine Mounts, Casters, Leg Levelers | M24-2.00 x 115 | m24-2 x 115 leveling bolt hes 100b | 818 |
| ||
| METRO IND | OH | Machine Mounts, Casters, Leg Levelers | M24-2.00 x 85 | m24-2 x 85 leveling bolt hes 100b | 42 |
| ||
| METRO IND | OH | Machine Mounts, Casters, Leg Levelers | M30-2.00 x 115 | m30-2 x 115 leveling bolt hes 100b | 1123 |
| ||
| METRO IND | OH | Machine Mounts, Casters, Leg Levelers | M30-2.00 x 140 | m30-2 x 140 leveling bolt hes 100b | 38 |
| ||
| METRO IND | OH | Machine Mounts, Casters, Leg Levelers | M30-2.00 x 85 | m30-2 x 85 leveling bolt hes 100b | 14 |
| ||
| METRO IND | OH | Machine Mounts, Casters, Leg Levelers | M30-3.50 x 115 | m30-3.5 x 115 coarse leveling bolt hes 100b | 146 |
| ||
| METRO IND | OH | Machine Mounts, Casters, Leg Levelers | Class 10.9 | M24-2.00 x 130 | m24-2 x 130 leveling bolt hes 14b 10.9 | 57 |
| |
| METRO IND | OH | Machine Mounts, Casters, Leg Levelers | Class 10.9 | M24-2.00 x 160 | m24-2 x 160 leveling bolt hes 14b 10.9 | 12 |
| |
| METRO IND | OH | Machine Mounts, Casters, Leg Levelers | Class 10.9 | M22-1.50 x 110 | m22-1.5 x 110 leveling bolt hes 16b 10.9 | 4 |
| |
| METRO IND | OH | Machine Mounts, Casters, Leg Levelers | M20 x 140 | m20 x 140 leveling bolt assembly h-ta-y-20 | 22 |
| ||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | Plastic | 4 x 1.25 | caster rigid plate stainless steel 4 x 1.25 rubber on polypropylene delrin bearing 5-7/16 in.overall ht.2-15/16 x 4-1/8 top plate w/1-3/4 x 2-15/16-250lb. capacity-40 f to +180 f | 2 |
| |
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | oakland cal caster-100601 | 6 |
| |||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | oakland cal caster-100601 | 142 |
| |||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | oakland cal caster-100601 | 54 |
| |||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | 4 x 23/4 | dolly/organ/w/base 4 x 23/4 swivel casters/4 to 7 straps | 1 |
| ||
| OneMonroe | NC | Handles | offset handle/1888 | 2 |
| |||
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | Brass | Zinc/Clear | 5/16-18 x 1 | caster swivel threaded stem sz 5/16-18 x 1 wheel sz 1-5/8 wheel mat soft rubber spherical finish metalized brass bearing plain bore load ht 2-5/16 load cap 70 lbs temp rt-40 to +180 f | 77 |
|
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | oakland cal caster-130202 | 38 |
| |||
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | oakland cal caster-130202 | 8 |
| |||
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | oakland cal caster casters | 2 |
| |||
| OneMonroe | MN | Handles | Chrome Plated | 18 | 18 chrome extended handle | 2 |
| |
| OneMonroe | MN | Protective Caps & Plugs | wheel/4x1-1/2ipoly/poly3/4idel brg 500# capacity | 9 |
| |||
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | oakland cal caster-130202 | 16 |
| |||
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | oakland cal caster-130202 | 36 |
| |||
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | oakland cal caster-130202 | 86 |
| |||
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | oakland cal caster-130202 | 10 |
| |||
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | oakland cal caster-130202 | 17 |
| |||
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | oakland cal caster-130202 | 41 |
| |||
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | oakland cal caster-130202 | 9 |
| |||
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | oakland cal caster-130202 | 20 |
| |||
| Ababa | CA | Storage Bins | akro mills bin divider for 30-150/30-158/30-184 | 3 |
| |||
| Ababa | CA | License Plate Hardware | Steel | Zinc/Clear | #14 x 3/4 | 14 x 3/4 hx wsh znc license plate screw (10/pk) | 1 |
|
| Ababa | CA | License Plate Hardware | Steel | Black Oxide | #14 x 5/8 5/8 | 14 x 5/8 5/16 hx 5/8 wsh blk license plate screw (6/pk) | 1 |
|
| Ababa | CA | Protective Caps & Plugs | Black Oxide | 1/2 | 1/2 hole 7/8 dia deprss d ctr blk plst hole plug (15/pk) | 3 |
| |
| Ababa | CA | Protective Caps & Plugs | Black Oxide | 1/4 | 1/4 hole blk plst flsh type hole plug (18/pk) | 1 |
| |
| Ababa | CA | License Plate Hardware | Steel | Plain / Furnace Black | #14 x 3/4 3/8 | 14 x 3/4 3/8 hx wsh s-blk license plate screw (6/pk) | 5 |
|
| Ababa | CA | Storage Bins | 24 | 24 hole bin-33 3/4w x 12d x 23-7/8h | 3 |
| ||
| Ababa | CA | Springs (Extension) | Steel | Zinc/Clear | .187 x .685 x .020 | .187 x .685 x .020 extension spring zinc pltd | 175 |
|
| Ababa | CA | Springs (Extension) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | .029 x .678 | .029 x .678 oal s/s loop end extension spring | 80 |
| |
| Ababa | CA | Gaskets | 3 | 3m virtua ccs protective glasses w/foam gasket cleat anti-fog lens | 22 |
| ||
| Ababa | CA | Protective Caps & Plugs | Nickel Plated | 1/4 | 1/4 plug button nickel pltd & powder coated with tiger drylac #89/11010 ral9002 lt gray fine texture | 25 |
| |
| Ababa | CA | Knobs & Star Grips | #39200 | adjusting knob assembly for #39200 | 1 |
| ||
| Ababa | CA | Protective Caps & Plugs | .187 | .187 hole-.031/.140 pt hole plug black | 3900 |
| ||
| Ababa | CA | Strut Systems (Channels, Clamps, Hangers, etc.) | 4 | 4 hole (7 1/4) splice plate | 8 |
| ||
| Ababa | CA | Nails | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 13 | 13 ga x 3/4 spiral nail oval hd 304 s/s | 10540 |
| |
| Ababa | CA | Nails | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Nickel Plated | 13 | 13 ga x 3/4 spiral nail oval hd 304 s/s nickel plated | 4053 |
|
| Ababa | CA | Nails | .083 x 1 1/4 | .083 x 1-1/4 ring dome coil nail bright (16m/cs) | 1 |
| ||
| Ababa | CA | Latches & Catches | self adjusting spring latch smooth (2.4-14.3 grip) | 90 |
| |||
| Ababa | CA | Hinges | Steel | Zinc/Clear | f6 retractable door removal hinge steel zinc pltd | 57 |
| |
| Ababa | CA | Latches & Catches | 300 Stainless (A1,A2, 18-8,304,310 etc.) | link lock flat cam rotary action latch s/s | 5 |
| ||
| YANKEE | NH | Storage Bins | 106 | quantum bin divier - 6 - black - works with qsb102, qsb104, qsb106 | 1316 |
| ||
| Express | CA | Brackets & Supports | 2 | 2 hole 90 degree angle bracket (holes fit 3/8 ) | 100 |
| ||
| Express | CA | Nails | 16 x 2 | 16x2 drive nail | 40370 |
| ||
| Express | CA | Strut Systems (Channels, Clamps, Hangers, etc.) | Steel | Galvanized | 1 5/8 x 1 5/8 | 1-5/8x1-5/8 non unistrut 12 gage slotted pre galvanized 10 foot | 137 |
|
| Express | CA | Strut Systems (Channels, Clamps, Hangers, etc.) | Steel | Galvanized | 1 5/8 x 1 5/8 | 1-5/8x1-5/8 non unistrut 12 gage slotted pre galvanized 20 foot | 235 |
|
| Express | CA | Hinges | Steel | Galvanized | 4 | 4 hole adjustable hinge electro galvanized | 69 |
|
| Express | CA | Hinges | Steel | Galvanized | 3 | 3 hole adjustable hinge electro galvanized | 26 |
|
| Express | CA | Strut Systems (Channels, Clamps, Hangers, etc.) | 3 1/2 | 3-1/2 single channel post base eg korfit-unistrut | 8 |
| ||
| Express | CA | Protective Caps & Plugs | Plastic | Plain / Furnace Black | fitting (end cap) plastic | 485 |
| |
| Express | CA | Strut Systems (Channels, Clamps, Hangers, etc.) | 3 1/2 | 3-1/2 single channel 2-hole post base (straight) eg korfit-unistrut | 17 |
| ||
| Express | CA | Strut Systems (Channels, Clamps, Hangers, etc.) | 3/8-16 channel nut (use with 1 or 13/16 channel depth) eg korfit-unistrut | 3044 |
| |||
| Express | CA | Nails | simpson gas-actuated concrete nailer | 1 |
| |||
| Express | CA | Latches & Catches | master lock breakaway lock-key 197 500kabrk/197 | 33 |
| |||
| Express | CA | Nails | 60 | 60d bright common concrete nail 6/ea = 1 nail | 270 |
| ||
| Express | CA | Handles | 1/2 x 9 | 1/2x9 ratchet drive handle | 10 |
| ||
| Express | CA | Handles | 300 Stainless (A1,A2, 18-8,304,310 etc.) | wire toothbrush-18-8 304 steel wood handle (3x7) | 102 |
| ||
| Express | CA | Handles | Chrome Plated | hardware-schlage nd40s privacy lock sparta handle-626 stain chrome finish | 1 |
| ||
| Express | CA | Strut Systems (Channels, Clamps, Hangers, etc.) | 1/4-20 channel nuts w/spring (1-5/8 series) eg korfit-unistrut | 2600 |
| |||
| Express | CA | Strut Systems (Channels, Clamps, Hangers, etc.) | 3/8-16 channel nuts w/spring (1-5/8 series) eg korfit-unistrut | 1737 |
| |||
| Express | CA | Strut Systems (Channels, Clamps, Hangers, etc.) | 1/2-13 channel nuts w/spring (1-5/8 series) eg korfit-unistrut | 816 |
| |||
| Express | CA | Handles | Steel | wire hand brush-carbon steel curved wood handle (3x19) | 14 |
| ||
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
