FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| OneMonroe | NC | Hinges | pivot hinge | 1 |
| |||
| OneMonroe | NC | Knobs & Star Grips | Resin (Phenolic, etc.) | Plain / Furnace Black | 1/4-20 x 2 | 4 arm phenolic knob 1/4-20 x 2 | 332 |
|
| OneMonroe | NC | Handles | Aluminum | Black Oxide | M128 | 128mm alum u handle black m-8 | 217 |
|
| OneMonroe | MN | Knobs & Star Grips | Steel | Zinc/Clear | spring latch knurled knob steel zinc equal to southco 57-10-201-10 | 24 |
| |
| OneMonroe | NC | Storage Bins | short divider for ndc3120 bin | 43 |
| |||
| OneMonroe | MN | Hinges | Steel | steel continuous hinge with holes-29.80 long | 2 |
| ||
| OneMonroe | NC | Latches & Catches | compression latch | 3 |
| |||
| OneMonroe | NC | Handles | t-handle | 1 |
| |||
| OneMonroe | NC | Handles | Steel | M12 x 95 | steel rev handle m12 x 95mm | 30 |
| |
| OneMonroe | NC | Handles | Steel | 3/8-16 x 4.17 | 3/8-16 x 4.17 steel rev handle | 98 |
| |
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | 1/4 x 20 x 1 1/4 | 1/4 x20x1-1/4 threaded non-skid leveling glide with 1 base | 20 |
| ||
| OneMonroe | NC | Latches & Catches | li ft & turn latch | 1 |
| |||
| OneMonroe | NC | Protective Caps & Plugs | Steel | Nickel Plated | 3/4 (037-.097) | 3/4 x .037-.097 end cap-steel nickel | 2190 |
|
| OneMonroe | NC | Hinges | full mortise standard weight hinge w/steeple tips & berring | 4 |
| |||
| OneMonroe | NC | Hinges | 4 1/2 x 4 1/2 | 4-1/2 x 4-1/2 full mortise hinge 06-8784 | 2 |
| ||
| OneMonroe | NC | Handles | Aluminum | M70 | 70mm alum elec handle tapped | 17 |
| |
| OneMonroe | NC | Gaskets | gasket for our 2600 w/studs | 10 |
| |||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | oakland cal caster-130202 | 22 |
| |||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | oakland cal caster-100601 | 25 |
| |||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | Steel | steel level it leveler | 8 |
| ||
| Jackson | MS | Storage Bins | 32 | 32 hole bin 33.75w x 19.25 tall x 12 deep bolt bin | 1 |
| ||
| OneMonroe | MN | Hinges | hinge base for med duty mdms | 30 |
| |||
| OneMonroe | NC | Hinges | Aluminum | 96 | 96 aluminum continuous hinge | 9 |
| |
| OneMonroe | NC | Handles | handle68in lpdouble grp welded | 1 |
| |||
| OneMonroe | NC | Handles | 18 x 9 | hand truck with 62 double grip handle flat back with 2 straps 18 x 9 solid flush mount nose plate pneumatic wheels stair climbers kick bar & disc brakes | 1 |
| ||
| Century | FL | Protective Caps & Plugs | Plastic | Plain / Furnace Black | caplug pd-240 pe-ld01 red002red threaded plastic plugs for flared jic fittings capplugs capplugs capplugs capplugs | 803 |
| |
| Century | FL | O-Rings & Quad Ring Seals (X-Rings) | 568-037 | ms29561-037 as568-037 | 782 |
| ||
| Century | FL | Protective Caps & Plugs | an929-l6j | 48 |
| |||
| Century | FL | O-Rings & Quad Ring Seals (X-Rings) | Plain / Furnace Black | ms29513-011 | 2000 |
| ||
| Century | FL | Protective Caps & Plugs | 14 | caplug ww-14 pe-ld01 yel002yellow tapered caps and plugs with wide thick flanges capplugs capplugs capplugs capplugs | 199 |
| ||
| MAINSOURC | NH | Vibration/Shock Absorbing Mounts, Rubber Bumpers | bumper bs-05 clear psa 1/2x1/16 polyurethane | 3000 |
| |||
| Century | FL | Protective Caps & Plugs | Plastic | Plain / Furnace Black | 28 | alliance 28 .910 od tapered plug/cap plastic (blue) q2b | 850 |
|
| Century | FL | Handles | ms39087-308cp | 8 |
| |||
| Century | FL | Handles | 300 Stainless (A1,A2, 18-8,304,310 etc.) | parker# xv500p-8-02 brass ball valve with stainless handle 1/2. parker# xv500p-8-02 | 1 |
| ||
| Century | FL | O-Rings & Quad Ring Seals (X-Rings) | ms29561-128 packing preformed | 41 |
| |||
| Century | FL | O-Rings & Quad Ring Seals (X-Rings) | Steel | 2.986 | ms29513-234 packing preformed o-ring hydrocarbon fuel resistant | 104 |
| |
| Century | FL | O-Rings & Quad Ring Seals (X-Rings) | Plain / Furnace Black | ms28775-114 | 1871 |
| ||
| Century | FL | Protective Caps & Plugs | Steel | Nickel Plated | d3992sn end cap for steel nickel d3992sn end cap steel nickel | 1772 |
| |
| Century | FL | Brackets & Supports | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 39-1941 | 39-1941 bracket inner 304 stainless_____________ | 1657 |
| |
| Century | FL | Machine Mounts, Casters, Leg Levelers | Steel | Zinc/Clear | 1/4-20 x 1 | 1/4-20 x1 hex leveler zinc plated bickeye# fh2116-zi 1/4-20x1 hex leveler. 9/16 base | 1275 |
|
| MAINSOURC | NH | Protective Caps & Plugs | Plastic | NAS837-25C (ESD CAP PLUG 1-9/16-18) NAS83725C | 10 |
| ||
| Century | FL | Grommets & Eyelets | stimpson grommet & washer set spg0b grommet & spw0b washer_x000d_2 component part | 1136 |
| |||
| Century | FL | Protective Caps & Plugs | Plastic | Plain / Furnace Black | nsm capplug cd-8 red threaded plastic caps for flared jic fittings | 3497 |
| |
| Century | FL | Grommets & Eyelets | Nylon (Polyamide) | 04 | 04-4111---black nylon screw grommet per print | 89 |
| |
| Century | FL | Springs (Compression) | 2.5 | lc-072gg-11m spring compress 2.5 overal 1.41 comp 32.33 lbs 9657k418 | 4992 |
| ||
| Century | FL | O-Rings & Quad Ring Seals (X-Rings) | ms29513-037 packiing | 67 |
| |||
| Century | FL | Springs (Compression) | spring compression 54od 45l spring compression 54od 45l | 4930 |
| |||
| Century | FL | Springs (Compression) | assoc. spring c0148-021-0500-m compression spring | 214 |
| |||
| Century | FL | Springs (Compression) | assoc. spring c0180-032-0310-s compression spring q2c | 90 |
| |||
| Century | FL | Protective Caps & Plugs | caplug cec-18 e/vac75 blk001black conductive caps for threaded connectors capplugs capplugs capplugs capplugs | 5327 |
| |||
| Century | FL | O-Rings & Quad Ring Seals (X-Rings) | Plain / Furnace Black | ms29513-122 | 425 |
| ||
| Century | FL | Protective Caps & Plugs | nsn caplug pd-40 yelllow 201801kb-low density capplugs capplugs | 11250 |
| |||
| Century | FL | Brackets & Supports | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Silver Plated | M0.50 | 39-1992 silverado outer bracket 0.50mm 301 stainless steel 1/2 hard | 417 |
|
| Century | FL | Brackets & Supports | e8cr110-014 rev a bracket angle l3 technologies 8cr110-014 | 380 |
| |||
| Century | FL | Springs (Compression) | ms24585c160 | 1 |
| |||
| Endries | WI | Protective Caps & Plugs | Plastic | Plain / Furnace Black | 28/400 | 6004 28/400 low-density polyethylene yorker spout cap natural red (freund container only) | 91 |
|
| Endries | WI | Hinges | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 3 x 4 | whss80240lf 3x4in stainless steel left hand female lift off hinge (guden only) | 61 |
| |
| Endries | WI | Hinges | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 3 x 4 | whss80240lm 3x4in stainless steel left hand male lift off hinge (guden only) | 61 |
| |
| Endries | WI | Vibration/Shock Absorbing Mounts, Rubber Bumpers | Plastic | Plain / Furnace Black | 06 1/2 x 1/4 | bs-06 1/2x1/4 black polyurethane bumper with adhesive | 5000 |
|
| Endries | WI | Brackets & Supports | Steel | Zinc/Clear | 3/4 x 1 1/2 x .0375 | 424z 3/4x1-1/2x.0375 mounting bracket trivalent clear zinc (frameware inc only) | 50 |
|
| Endries | WI | Grommets & Eyelets | Nylon (Polyamide) | gee55-n-c .047-.055x.14 height x 100 foot roll nylon v-slot grommet edging | 600 |
| ||
| Endries | WI | Latches & Catches | Steel | Zinc/Clear | vise action latch hex recess hd clockwise blk rohs (all-west) | 73 |
| |
| Cal Fastenrs | CA | Protective Caps & Plugs | Nickel Plated | 3/8 | 3/8 hole plug nickel plated d3005 | d3005 | d3005 | 200 |
| |
| Cal Fastenrs | CA | Handles | #1000 right hand 25/32 handle- #60 keyed | 5 |
| |||
| OneMonroe | NC | Knobs & Star Grips | Aluminum | alum hand knob | 2 |
| ||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | tente swivel caster rig | 39 |
| |||
| OneMonroe | NC | Hinges | 24 | 24 hinge | 1 |
| ||
| OneMonroe | NC | Grommets & Eyelets | grommet poly/slotted adheisive-backed panel range .062-.099 natural 100 ft | 1 |
| |||
| OneMonroe | NC | Protective Caps & Plugs | 2 7/8 | 2-7/8 in size hub machined to accept this cap-dust cap to fit above ordered wheel | 4 |
| ||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | Steel | 3-11/16 x 5 3/8 | floor lock material steel use with caster size 4 extended height 5-5/8 retracted height 4-11/16 top plate size 3-11/16 x 5-3/8 bolt hole pattern 2-5/8 x 3-5/8 | 10 |
| |
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | Steel | 5 3/8 x 7 1/4 | floor lock material steel use with caster size 8 extended height 10-1/4 retracted height 9-1/4 top plate size 5-3/8 x 7-1/4 bolt hole pattern 3-3/8 x 5-1/4 | 3 |
| |
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | swivel plate caster | 2 |
| |||
| OneMonroe | NC | Grommets & Eyelets | cable assy1176723.21 in cableeyelet | 12 |
| |||
| OneMonroe | NC | Grommets & Eyelets | cable assy1176716.96 in cableeyelet | 12 |
| |||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | oakland cal caster-130202 | 9 |
| |||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | 6 | 6in scaffold caster | 3 |
| ||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | oakland cal caster material handling equipment | 4 |
| |||
| OneMonroe | NC | Handles | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Zinc/Clear | 18 | material handling product handle sz 18 looped w/staked feet mat stainless steel | 6 |
|
| OneMonroe | NC | Handles | 300 Stainless (A1,A2, 18-8,304,310 etc.) | intermetro stainless steel handle staked. | 8 |
| ||
| OneMonroe | NC | Storage Bins | 6 | bin divider polypropylene gray long ctn qty 6 use with dg92035 (not included) | 5 |
| ||
| OneMonroe | NC | Storage Bins | long divider for ndc3060 bin | 3 |
| |||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | 2 1/2 x 3 5/8 | caster swivel-plate wheel size 4 x 1-1/4 wheel mat grey tpr flat tread bearing ball w/total lock brake load ht 5-1/8 top plate size 2-1/2 x 3-5/8 bolt hole ptrn 1-3/4 x 2-13/16 slotted 3-1/16 load cap 240 lbs temp rt-45 to +180 f | 2 |
| ||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | oakland cal caster | 2 |
| |||
| OneMonroe | NC | Machine Mounts, Casters, Leg Levelers | oakland cal caster-130499 | 6 |
| |||
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
