FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Cal Fastenrs | CA | Springs (Extension) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | century#80103s stainless steel extension spring considered special w/newport-we keep for now | 940 |
| ||
| Cal Fastenrs | CA | Protective Caps & Plugs | Plastic | caplug part# t-14-x red plug t-14-x | 530 |
| ||
| NAPPCO | TX | Latches & Catches | 300 Stainless (A1,A2, 18-8,304,310 etc.) | d-ring lock latch s/s (2 point) | 52 |
| ||
| NAPPCO | TX | Brackets & Supports | towel brackets 2 each | 969 |
| |||
| NAPPCO | TX | Hinges | Steel | Zinc/Clear | 19 | steel plated rear door hinge (flush)19 | 76 |
|
| NAPPCO | TX | Brackets & Supports | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 1/4 | 1/4 three line bracket s/s | 450 |
| |
| NAPPCO | TX | Gas Springs, Gas Struts (Lift-O-Mat etc.) | Steel | Plain | gas spring flat bracket(3holes) | 1000 |
| |
| NAPPCO | TX | Gas Springs, Gas Struts (Lift-O-Mat etc.) | Steel | Plain | gas spring bracket 90deg(2holes) | 986 |
| |
| NAPPCO | TX | Springs (Extension) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | .375 x .041 x .075 | extension spring ss .375x.041x.075 | 230 |
| |
| NAPPCO | TX | Latches & Catches | southco c5-12-26 sealed lever latch | 16 |
| |||
| NAPPCO | TX | Knobs & Star Grips | Aluminum | k1 1/2 | aluminum knob 1 od 1/2 h 1/4-20 thd | 150 |
| |
| NAPPCO | TX | Protective Caps & Plugs | Plastic | square tube plug 1 polyethylene | 2430 |
| ||
| NAPPCO | TX | Gaskets | southco e3-0-30268-02 gasket e3 single hole | 469 |
| |||
| NAPPCO | TX | Latches & Catches | southco c2-32-11 lever latch raised | 13 |
| |||
| NAPPCO | TX | Latches & Catches | southco 64-22-10 paddle latches | 7 |
| |||
| NAPPCO | TX | Latches & Catches | southco c3-12-10 latch | 20 |
| |||
| NAPPCO | TX | Protective Caps & Plugs | Plastic | 6.668 dia. 1.50lgth cap plug for | 200 |
| ||
| NAPPCO | TX | Latches & Catches | southco lift & turn compression latch non-lock | 6 |
| |||
| NAPPCO | TX | Hinges | Steel | Plain | lift-off torpedo hinge | 10 |
| |
| NAPPCO | TX | Hinges | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 6 | 6 continuoushinge s/s 2 open x.062 | 26 |
|
| NAPPCO | TX | Latches & Catches | southco vise action compression latch large | 14 |
| |||
| NAPPCO | TX | Machine Mounts, Casters, Leg Levelers | 5/16-18 x 1 1/2 | 5/16-18 x 1-1/2 leg leveler w/soft gray | 124 |
| ||
| MMCC | IL | Knobs & Star Grips | Steel | Plain | M10-1.50 | ball knob din 319c steel zinc/clear | inquire |
|
| MMCC | IL | Grease Fittings | Steel | Plain | grease fitting din d1 plain | 41 |
| |
| MMCC | IL | Grease Fittings | Steel | Plain | 10 x 1.5 | grease fitting din d1 plain | 6 |
|
| MMCC | IL | Grease Fittings | Steel | Plain | 6 x 1 | grease fitting din d1 plain | 9 |
|
| MMCC | IL | Grease Fittings | Steel | Plain | 8 x 1 | grease fitting din d1 plain | 4 |
|
| MMCC | IL | Grease Fittings | Steel | Plain | grease fitting din d1 plain | 90 |
| |
| MMCC | IL | Grease Fittings | Steel | Zinc/Clear | straight grease ftg h1 steel zinc/clear | 2 |
| |
| MMCC | IL | Grease Fittings | Steel | Zinc/Clear | straight grease ftg h1 steel zinc/clear | 331 |
| |
| MMCC | IL | Grease Fittings | Steel | Zinc/Clear | 6 x .75 | straight grease ftg h1 steel zinc/clear | 2490 |
|
| MMCC | IL | Grease Fittings | Steel | Zinc/Clear | straight grease ftg h1 steel zinc/clear | 1860 |
| |
| MMCC | IL | Grease Fittings | Steel | Zinc/Clear | 5 x .8 | straight grease ftg h1 steel zinc/clear | 704 |
|
| MMCC | IL | Grease Fittings | Steel | Zinc/Clear | 8 x 1 | straight grease ftg h1 steel zinc/clear | 2523 |
|
| MMCC | IL | Grease Fittings | Steel | Zinc/Clear | Mstraight | straight grease ftg h1 steel zinc/clear | 738 |
|
| MMCC | IL | Grease Fittings | Steel | Zinc/Clear | 6 x 1 | straight grease ftg h1 steel zinc/clear | 5164 |
|
| MMCC | IL | Grease Fittings | Steel | Zinc/Clear | 8 x .75 | straight grease ftg h1 steel zinc/clear | 106 |
|
| MMCC | IL | Grease Fittings | Steel | Zinc/Clear | 10 x 1 | straight grease ftg h1 steel zinc/clear | 6926 |
|
| MMCC | IL | Grease Fittings | Steel | Zinc/Clear | M10-1.50 | straight grease ftg h1 steel zinc/clear | 314 |
|
| MMCC | IL | Grease Fittings | Steel | Zinc/Clear | Mstraight | straight grease ftg h1 steel zinc/clear | 40 |
|
| MMCC | IL | Grease Fittings | Steel | Zinc/Clear | 12 x 1.5 | straight grease ftg h1 steel zinc/clear | 101 |
|
| MMCC | IL | Grease Fittings | Steel | Zinc/Clear | 45 grease fitting h2 steel zinc/clear | 150 |
| |
| BAYFASTCO | FL | Protective Caps & Plugs | Plastic | Plain | .625 x 1.500 | vinyl cap black | 5692 |
|
| BAYFASTCO | FL | Protective Caps & Plugs | Plastic | Plain | 1/2 | hole plug black polyethylene | 6390 |
|
| BAYFASTCO | FL | Protective Caps & Plugs | Plastic | Plain | 1/8 x 1 x 1 | black vinyl end cap flat end | 44400 |
|
| THRDFAST | FL | Protective Caps & Plugs | 300 Stainless (A1,A2, 18-8,304,310 etc.) | #9 x 2 | woodmac ss cap hd epdm washer | 5,250 |
| |
| THRDFAST | FL | Protective Caps & Plugs | 300 Stainless (A1,A2, 18-8,304,310 etc.) | #9 x 2 | woodmac ss cap hd epdm washer | 2,000 |
| |
| THRDFAST | FL | Nails | Plastic | Plain | #8 x 1 1/2 | common nail plastic strip hdg | 2,000 |
|
| THRDFAST | FL | Protective Caps & Plugs | 300 Stainless (A1,A2, 18-8,304,310 etc.) | #9 x 2 | woodmac ss cap hd epdm washer | 1,500 |
| |
| THRDFAST | FL | Grease Fittings | Steel | 1/4 | nf-28x5/8 grease fitting stl 1641 | 1,492 |
| |
| THRDFAST | FL | Protective Caps & Plugs | 300 Stainless (A1,A2, 18-8,304,310 etc.) | #9 x 2 | woodmac ss cap hd epdm washer | 1,250 |
| |
| THRDFAST | FL | Grease Fittings | Steel | 1/4 | nf-28 grease fitting 45 stl 1637 | 850 |
| |
| THRDFAST | FL | Protective Caps & Plugs | Nylon (Polyamide) | Plain | 3/8 | hole plug black | 400 |
|
| THRDFAST | FL | Protective Caps & Plugs | 300 Stainless (A1,A2, 18-8,304,310 etc.) | #9 x 2 | woodmac ss cap hd epdm washer | 48,500 |
| |
| THRDFAST | FL | Protective Caps & Plugs | 300 Stainless (A1,A2, 18-8,304,310 etc.) | #9 x 2 | woodmac ss cap hd epdm washer | 13,500 |
| |
| THRDFAST | FL | Nails | 316, 317, A4 Stainless | #8 | t-316 ss common nail | 59 |
| |
| THRDFAST | FL | Nails | Steel | Galvanized | #10 | common nail hdg | 50 |
|
| THRDFAST | FL | Nails | Steel | Galvanized | #10 x 7 | ring shank gutter nails hdg | 50 |
|
| THRDFAST | FL | Strut Systems (Channels, Clamps, Hangers, etc.) | Steel | Zinc/Clear | 3/8 | od strut strap | 115 |
|
| THRDFAST | FL | Strut Systems (Channels, Clamps, Hangers, etc.) | 2 7/16 x 1 5/8 | 2 7/16x1 5/8 12ga unistrut slot | 30 |
| ||
| THRDFAST | FL | Strut Systems (Channels, Clamps, Hangers, etc.) | 1 5/8 | 1-5/8 14 ga unistrut solid 20ft | 40 |
| ||
| THRDFAST | FL | Nails | 300 Stainless (A1,A2, 18-8,304,310 etc.) | #10 x 2 1/2 | 18-8 ss ringshank nail | 25 |
| |
| THRDFAST | FL | Nails | #10 x 3 | bright common nail | 25 |
| ||
| THRDFAST | FL | Nails | 300 Stainless (A1,A2, 18-8,304,310 etc.) | #12 x 3 1/4 | 18-8 ss sprialshank nail | 25 |
| |
| THRDFAST | FL | Grease Fittings | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 1/4 | nf-28 90 grease fitting ss 1969-s | 20 |
| |
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
