FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Century | FL | Self-Clinching Standoff | Steel | Zinc/Clear | M3 x 10 | captive cfbsom3-10 m3 x 10 blind standoff steel zinc clear | 5000 |
|
| Century | FL | Flat Washer | Steel | Plain | .328 x .562 x .063 | an960-516 q4b | 195 |
|
| Century | FL | Hex Male/Female Standoff | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 3/8 | raf 4573-632-ss 6-32 x 3/8 m/f standoff 5/16 hex stainless steel | 1000 |
|
| Century | FL | Set Screw (Socket Head) | Steel | Plain | #10-32 x 5/16 | 107617-20 ms51023-50 with copper plate per prt spec hand req anti tarnish | 10 |
|
| Century | FL | Machine Screw | Steel | Black Oxide | 8/32 x 3/4 | 8/32 x 3/4 phillips flat m/s steel black ox | 7260 |
|
| Century | FL | pem fhs-632-10 fhs-632-10 | 36 |
| ||||
| Century | FL | Machine Screw | Steel | Plain | ms24694s99 flat head mach screw | 19 |
| |
| Century | FL | Electrical Lugs & Terminals | Nylon (Polyamide) | 16-14 | mnu14-120dfik fully nylon insulated butted seam female disconnect wire size 16-14 awg. | 2000 |
| |
| Century | FL | Flat Washer | Plain | 0.281 x .531 x .032 | ms15795-752 | 364 |
| |
| Century | FL | Flat Washer | Steel | Zinc/Clear | .204 x 2 x .0312 | .204 x 2 x .0312 flat washers steel zinc | 1000 |
|
| Century | FL | Shim Washer (Round, Slotted, Square etc.) | Steel | Plain | va40 unloader shim rev-.355/.365 x .004 steel was xd4323 parker parker | 470 |
| |
| Century | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 3/8 | 10-32 x 3/8 phillips 100dg flat head 18-8 dfars | 24750 |
|
| Century | FL | Plate Nut (Nutplate, Floating Anchor Nut) | Plain | #10-32 | ms21059l3 | 58813 |
| |
| Century | FL | Socket Head Cap Screw | Class 12.9 | Zinc/Yellow | M10 x 50 | m10.0 x50.0mm class 12.9 socket hd cap screw cons zinc yellow din 912 | 125 |
|
| Century | FL | Woodruff Key | Plain | 1/16 x 5/16 | 206 1/16x5/16 woodruff key usa 202.5 material 1035 | 132 |
| |
| Century | FL | Fender Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M4 | m 4 flat washer 18-8 m 4 flat washer 18-8 din 9021 | 1814 |
|
| SWACO | OH | Machine Key (Square & Rectangular) | Steel | Black Oxide | M10 x 8 x 45 | M10x8 x 45 parallel key d6885a black oxide | 56 |
|
| SWACO | OH | Internal Thread Insert (Rivet Nut, Well Nut, Jack Nut) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | tu-ssm6huko50 rivnut | 225 |
| |
| SWACO | OH | Flat Washer | Steel | Plain | 100 | bolt 100 flush head nas1580c3t3 | 62 |
|
| Irwin Ind | Ont | Dowel Pin | Steel | Zinc/Black | 1/4 x 3/4 | 1/4x3/4 dowel pins steel .0002 min zinc trivalent black b18.8.2 | 2035 |
|
| OneMonroe | MA | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Plain | #10 x 1 | 10 x 1 phillips oval hd sht met screw-black | 8.2 |
|
| OneMonroe | MA | Self-Tapping Thread Cutting Screw (types f,1,23,25) | Steel | Zinc/Clear | #6-32 x 3/8 | #6-32 x 3/8 slotted indented hex washer head thread cutting screw type-23 zinc | 3712 |
|
| OneMonroe | MA | Button Head Socket Cap Screw | Steel | Plain | 1/2-13 x 1.0 | 1/2-13 x 1.0 button hd sock cap screw steel plain | 42 |
|
| GLF | OH | Coupling Nut | Steel | Zinc/Clear | 1/2-13 x 5/8 x 1 3/4 | 1/2-13 x 1-3/4 hex coupling nut stl zc | 60813 |
|
| GLF | OH | Set Screw (Socket Head) | Plain | M12-1.75 x 25 | m12-1.75 x 25mm socket set screw-dog point | 62 |
| |
| GLF | OH | Hex Head Cap Screw | Class 10.9 | Zinc/Clear | M12-1.75 x 40 | m12-1.75 x 40 hhcs cl 10.9 stl zc din 933 | 25 |
|
| GLF | OH | Round Female/Female Standoff | Nylon (Polyamide) | Plain | 6/6 | 0.115 id x 0.3125 x 1/4 rd spacer 6/6 nyl nat | 2784 |
|
| GLF | OH | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M8-1.25 x 16 | m8-1.25 x 16 shcs 18-8 s/s din 912 | 136 |
|
| AIH | AZ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #4-40 x 3/8 | 4-40x3/8 phil flat m/s s/s | 3000 |
|
| AIH | AZ | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain | #10-32 x 2 1/4 | 10-32x2 1/4 screw socket cap 316 ss | 912 |
|
| NBS | IL | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4 x 5 | 3/4x5 18-8 s/s steel dowel pin-asme b18.8.2-bright finish (taiwan) | 25000 |
|
| NBS | CA | Flange Screw w/o serr. (Frame Bolt) | Grade 8 | Zinc/Yellow | 3/4-10 x 2 | 3/4-10 x 2 gr.8 frame bolt-non-indented-non-serrated-zinc yellow (taiwan) | 10000 |
|
| NBS | IL | Flange Screw w/o serr. (Frame Bolt) | Class 10.9 | Zinc/Clear | M8-1.25 x 20 | M8-1.25x20 cl.10.9 type-b frame bolt-non-indented-non-serrated-trivalent rohs jis 1189 | 10000 |
|
| NBS | CA | 12 Point Flange Screw (CounterBore) | Steel | Black Oxide | 7/8-14 x 5 | 7/8-14x5 12 point flange bolt-furnace black (taiwan) | 10000 |
|
| Field Fas | IL | Fuses & Holders | Plain | fuse holder atc blade type in line blk | 181 |
| ||
| Field Fas | IL | Rivet Installation Tools & Accessories | Plain | ebbert sleeve (eb) | 2 |
| ||
| Field Fas | IL | Machine Screw | Steel | Zinc/Clear | M3-0.50 x 10 | m3-.5 x 10 phillips flat m/s stl zc | 3000 |
|
| OneMonroe | MN | Lock Nut, Nylon Insert | Steel | Plain | 1/2-13 | 1/2-13 nyl ins l/n ne type-esna l/n2stl | 46 |
|
| OneMonroe | MN | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | Plain | 3/8-16 x 1.00 | insert wire tangless 3/8-16 x 1.00 dia | 68 |
| |
| OneMonroe | MN | Lock Nut, Nylon Insert | Steel | Zinc/Clear | M8-1.00 | m8 x 1.0 nylon l/n-zp | 90 |
|
| OneMonroe | MN | Machine Taps | Steel | M7-1.00 | m7-1.0 high speed steel taper tap | 1 |
| |
| OneMonroe | MN | Panel & Trim Clips (J-Clips, U-Clips) | Plain | auvecopak honda & acura retaining clips | 1 |
| ||
| OneMonroe | MN | Joint Connector Bolt, JCB, Draw-Bolt, Assembly Bolt | Steel | Black Oxide | 1/4-28 x 28.5 | 1/4-28x28.5 cross slotted wafer head adjusting bolt w/3/8-16 ext thread steel hard black-oxide nylon patch microspheres 393s yellow patch per print | 3000 |
|
| OneMonroe | MN | Sprockets | Plain | 3/4 | 35b sprocket 3/4 finished bore 18 hardened teeth | 23 |
| |
| OneMonroe | MN | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 3/4-10 x 2.0 | 3/4-10x2.0 hhcs gr 5 zinc | 75 |
|
| OneMonroe | MN | Machine Mounts, Casters, Leg Levelers | 5 | 5in rigid caster | 10 |
| ||
| OneMonroe | MN | Machine Dies | Steel | 1/8-27 | 1/8-27 npt hexagon die high carb. steel 1-7/16 across flats 1/card | 2 |
| |
| OneMonroe | MN | Socket Head Cap Screw | Class 12.9 | Plain | M4-0.70 x 18 | m4-.7 x 18 soc cs ft 12.9stl din 912-77 | 338 |
|
| OneMonroe | MN | Handles | handle only for lock pf-378-a replacement | 4 |
| |||
| OneMonroe | MN | Hoses | 6 | 6 400g 6 hose psa | 10 |
| ||
| OneMonroe | MN | Self-Clinching Standoff | Plain | pemref soa-440-4 thru hole threaded standoff | 1200 |
| ||
| OneMonroe | MN | Machine Screw Nut | Plain | ms35649-264 dfars 252.225-7014 applies | 100 |
| ||
| OneMonroe | MN | Machine Screw | Steel | Zinc/Clear | 1/2 x 1 1/2 | 1/2 x 1 1/2 slotted zp | 14 |
|
| Alma Bolt | MI | Socket Head Cap Screw | Class 12.9 | Plain | M4-0.70 x 16 | m4 x .7 x 16 domestic socket head cap screw 12.9 | 2750 |
|
| Alma Bolt | MI | Machine Screw Nut | Plain | #3-56 | #3-56 sae machine screw hex nut | 9000 |
| |
| Alma Bolt | MI | Hex Head Cap Screw | Grade 2 | Plain | 1 1/4-7 x 5 1/2 | 1 1/4-7 x 5 1/2 hex hd mach bolt g2 | 38 |
|
| Alma Bolt | MI | Wood Screw | Zinc/Green | #8 x 2 1/2 | #8 x 2 1/2 green coat bugle head square drive t-17 | 6200 |
| |
| baier & m | SC | Hog Ring (Shoat Ring) | Plain | M31.47 x 1.78 | joint m31.47 x 1.78 70 rhd nbr for c20 hog ring gun | 30 |
| |
| Brikksen | FL | Wing Nut | 316, 317, A4 Stainless | Plain | M10-1.50 | wing nut american form a4 m10-1.5 din 315 | inquire |
|
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M8-1.25 x 35 | socket head cap screw full thread a2 m8-1.25 x 35 din 912 | 8000 |
|
| Brikksen | FL | Flat Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16 | 5/16 flat washer 3/4 od ss/epdm-100 per box | inquire |
|
| Brikksen | FL | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10-1.50 x 16 | flat socket head cap screw full thread a2 m10-1.5 x 16 din 7991 | 400 |
|
| Brikksen | FL | Wedge Stud Anchor | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4 x 1 3/4 | 1/4 x 1-3/4 wedge anchor 18-8ss with nut and washer | inquire |
|
| Brikksen | FL | Lag Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/2 x 3 | 1/2 x 3 hex lag bolt ss | 1000 |
|
| Brikksen | FL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6-1.00 x 16 | socket set screw cone point-25 per bag a2 m6-1.0 x 16 din 914 | inquire |
|
| Brikksen | FL | Dowel Pin | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M10 x 36 | dowel pin (m6 tolerance) a2 m10 x 36 din 7 | inquire |
|
| Brikksen | FL | Hex Jam Nut | Brass | Plain | 1/2-13 | 1/2-13 hex jam nut brass .313 thick .750 across flats | inquire |
|
| Brikksen | FL | Finished Hex Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/4-10 | 3/4-10 hex finish nut ss 50 per box f-108box | inquire |
|
| Brikksen | FL | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain | 5/16-18 x 1 1/4 | 5/16-18 x 1-1/4 soc cs 316ss | 50 |
|
| Brikksen | FL | Flat Washer | 316, 317, A4 Stainless | Plain | 1 1/2 | 5/8 flat washer 1-1/2 od .062 thick 316ss 25 per box | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-20 x 1 | 1/4-20 x 1 phillips truss m/s ss/chrome- | 1000 |
|
| Brikksen | FL | Sockets | 300 Stainless (A1,A2, 18-8,304,310 etc.) | #10-24 x 3/16 | 10-24 x 3/16 socket set oval point ss | inquire |
| |
| Brikksen | FL | Machine Screw | Brass | Plain | 5/16-18 x 1/2 | 5/16-18 x 1/2 slottedround m/s brass | 9000 |
|
| Brikksen | FL | Hose Clamp | 300 Stainless (A1,A2, 18-8,304,310 etc.) | #6 | #6 hose clamp (3/8-7/8) 1/2 band 300ss 10 per box | inquire |
| |
| Brikksen | FL | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | M10-1.50 x 55 | hex head cap screw full thread a4 m10-1.5 x 55 din 933 | 40 |
|
| Brikksen | FL | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-18 x 1 1/2 | 5/16-18 x 1-1/2 soc hd cs ss | 10000 |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Zinc/Black | 1/4-20 x 1 1/4 | 1/4-20 x 1 1/4 phillips truss m/s ss/black zinc | 100 |
|
| Brikksen | FL | Set Screw (Socket Head) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-24 x 5/8 | 5/16-24 x 5/8 soc set cp ss | 100 |
|
| Bossard | AZ | Flat Head Socket Cap Screw | Steel | Plain | screw flat hd socket cap | 194 |
| |
| Bossard | AZ | Quick Access Panel Fasteners (1/4 Turn etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | panel fastener stainless penn engineering | 1875 |
| ||
| Bossard | AZ | nut locking stainless penn engineering | 214 |
| ||||
| Bossard | AZ | Split Lock Washer | Steel | Plain | medium split lockwasher steel | 230 |
| |
| Optimas | IL | Button Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6-32 x 3/16 | 6-32 x 3/16 button head socket cap screw 18-8 ss | 100 |
|
| Optimas | IL | Self-Tapping Thread Rolling Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #2-28 x 5/8 | 2-28 x 5/8 6-lobe pan t/s 18-8 ss plastite 48-2 equivalent waxed | 3000 |
|
| American | WI | Finished Hex Nut | Steel | Zinc/Clear | 5/16-18 | 5/16-18 nc twirl-nut zinc | 323 |
|
| American | WI | Pipes | Black Oxide | 8 x 60 | 8 x 60 black pipe sch 40 | 1 |
| |
| American | WI | Hoses | 1 | 1 id red tex-mp multi-purpose air hose 300 psi | 300 |
| ||
| IndexFast | CA | Sheet Metal Speed Nut, Tinnerman Nut (F/J/U) | Steel | Zinc/Clear | sheet metal speed nut tinnerman nut (f/j/u) steel zinc/clear d7941-832-3b speed grip nut retainer 8-32 range .064-.105 electroplate tinnerman | inquire |
| |
| AFT Faste | TX | Finished Hex Nut | Class 10.9 | Plain | M8-1.25 | M8-1.25 finished hex nuts class 10 plain (100/pkg.) din 934 | 28 |
|
| AFT Faste | TX | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Phosphate | #6 x 1 1/8 | #6x1-1/8 daggerz phillips bugle head self drill screw phosphate (10 000/bulk pkg.) | 1 |
|
| AFT Faste | TX | Heat Shrink Tubing | 3/16 x 6 | 3/16x6 heat shrink | 550 |
| ||
| AFT Faste | TX | Self-Tapping Thread Rolling Screw | Steel | Zinc/Clear | #8-32 x 3/4 | 8-32x3/4 phil pan machine screw rolok zp | 5000 |
|
| Siena | IA | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16-24 x 1 | 5/16-24x1 hex head cap screw stainless steel 18-8 plain finish | 206 |
|
| AIH | AZ | Tubing | stuffing tube | 2 |
| |||
| Brikksen | FL | Finished Hex Nut | Brass | Plain | 3/4-10 | 3/4-10 hex fin nut brass | inquire |
|
| Brikksen | FL | Service & Repair Kits (Bolt Packs) | Silicon Bronze | Plain | 1/4-20 x 2 1/2 | 1/4-20 x 2-1/2 carriage bolt 655 silicon bronze full bodied partial thread 25 per small bag 5 small bags per master pack-generic brand | inquire |
|
| Brikksen | FL | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #2-56 x 5/16 | 2-56 x 5/16 phillips flat m/s 18-8ss | inquire |
|
| Brikksen | FL | Socket Head Cap Screw | 316, 317, A4 Stainless | Plain | M2-0.40 x 5 | socket head cap screw full thread a4 m2-.40 x 5 din 912 | inquire |
|
| Brikksen | FL | Fully Threaded Stud (All Thread) | 316, 317, A4 Stainless | Plain | 1/4-20 x 8 | 1/4-20 x 8 full thread stud 316ss | 900 |
|
| Brikksen | FL | Eye Bolt | Steel | Zinc/Clear | M10-1.50 | lifting eye bolt m10-1.5 steel zinc din 580 | inquire |
|
| Brikksen | FL | Self-Tapping Thread Cutting Screw (types f,1,23,25) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 x 1 1/2 | 3/8-16 x 1-1/2 phillips flat f ss | 400 |
|
| Brikksen | FL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #14 x 2 | 14 x 2 phillips truss a 18-8 ss w/1 thread | inquire |
|
| Brikksen | FL | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1-8 x 9 | 1-8 x 9 hex hd cap screw ss f593d | inquire |
|
| Brikksen | FL | Flat Washer | 316, 317, A4 Stainless | Plain | M6 | flat washer for cheese head screw (reduced o.d.) a4 m6 din 433 | inquire |
|
| Komar | IL | Flat Head Socket Cap Screw | 316, 317, A4 Stainless | Plain | 5/16-18 x 7/8 | 5/16-18 x 7/8 flat socket cap screw 316 ss |
| |
| OneMonroe | MN | Fully Threaded Stud (All Thread) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 x 1/4 20 x 1/2 | 4-armed 1dia 1/4-20x1/2 st stud | null |
|
| FasSpcMfg | FL | Flat Head Socket Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/8-11 x 1 | 5/8-11 x 1 flat head socket cap 304 stainless 2a fit | 1 |
|
| FasSpcMfg | FL | Flat Head Socket Cap Screw | 316, 317, A4 Stainless | Plain | #6-32 x 2 | 6-32 x 2 flat head socket cap full thread 316 stn | 3996 |
|
| FasSpcMfg | FL | Nylon Nail-In Anchor | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | .186 x .775 | .186x.775 special vented pin per dwg 304 stn pin portion .186x.775 vent through entire length .051 collar .240x.115(ref) with 2 flats milled to .190 diam thread 6-32(2a)x.110(+.000/-.005) includes .025 wide relief overall length 1.000(+/-.005) | 7 |
|
| FasSpcMfg | FL | Solid Rivet | 316, 317, A4 Stainless | Plain | 1/2 x 1 3/4 | 1/2 x 1-3/4 round head (button) solid rivet 316 stainless body diam .478/.520 head diam .844/.938 head ht .375/.406 hd radius .443 | 2 |
|
| OneMonroe | MA | Self-Tapping Self-Drilling Screw (Tek etc.) | Steel | Plain | #6 x 3/4 | #6 x 3/4 self-drilling screw flat hd phillips pt 2 | 5700 |
|
| OneMonroe | MA | Machine Screw | Steel | Zinc/Black | #10-32 x 3/8 | screw 10-32x3/8 phillips pan machine screw fully threaded black zinc 8000/ctn | 281 |
|
| OneMonroe | MA | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | #6 x 3/8 | #6 x 3/8 phillips pan s/m/s-type-b plated | 15000 |
|
| OneMonroe | MA | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M14-2.0-2.00 x 50 | m14-2.0 x 50m hex cap screw class 8.8 plated | 36 |
|
| OneMonroe | MA | Split Lock Washer | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1 | 5/16 military split lock washer dfar 316 stainless steel ms35338 2000/carton | 400 |
|
| OneMonroe | MA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4-28 x 3/8 | 1/4-28 x 3/8 phillips flat m/s ss undercut stainless | 600 |
|
| OneMonroe | MA | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M4-.7-0.70 x 18 | m4-.7 x 18 phillips pan m/s stainless25c37 | 100 |
|
| OneMonroe | MA | Set Screw (Square Head) | Steel | Plain | 1/4-20 x 3/4 | 1/4-20 x 3/4 sq hd set screw | 10 |
|
| Empire | WA | Split Lock Washer | Steel | Zinc/Yellow | 1/4 | 1/4 high alloy l/w yzp | 14000 |
|
| Empire | WA | Shoulder Bolt (Stripper Bolt) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4 x 1 3/4 (#10-24) | 1/4 x 1-3/4 soc shoulder screw stainless steel | 10 |
|
| Scheinert | NJ | L-Wrenches, Allen Wrenches & Torx Wrenches | Plain | M4 | m4 metric short arm hex key plain | 100 |
| |
| Raw Produ | NJ | Split Lock Washer | Aluminum | Plain | 1/4 | split ring lock washers aluminum-1/4 | 5931 |
|
| Raw Produ | NJ | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Black Oxide | 1/4-20 x 3/4 | phillips flat head ms black oxide 304 ss 1/4-20 x 3/4 | 483 |
|
| Raw Produ | NJ | Carriage Bolt | Steel | Galvanized | 1/4-20 x 3/4 | carriage bolts hdg 1/4-20 x 3/4 ft | 1800 |
|
| Raw Produ | NJ | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1/4-28 x 7/8 | hex cap screws grade 5 zinc 1/4-28 x 7/8 ft | 2130 |
|
| Raw Produ | NJ | Flat Head Socket Cap Screw | Class 12.9 | Zinc/Clear | M16-2.00 x 50 | flat socket caps screws 12.9 coarse alloy zinc-bake cr+3 m16-2.00x50 mm(ft) | 500 |
|
| Raw Produ | NJ | Self-Tapping Self-Drilling Screw (Tek etc.) | 400 Stainless (405, 410,416,420,430 etc.) | Plain | #12 x 2 | phillips pancake head self drill 410 ss #12 x 2 | 371 |
|
| AEROSPCE | MN | Ball Bearings, Balls, Bearing Mounts | Silicon Bronze | Plain | 428 | snsk3025bhm452 rivet bronze mandrel was 428 | 70 |
|
| AEROSPCE | MN | Self-Clinching Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 300 | lks-632-2md pemflex self-locking nut 300 series | 15296 |
|
| Vogelsang | NJ | Slotted Spring Pin (Roll Pin) | Plain | M12 x 45 | 12 x 45 slotted spring pins iso 13337 din 7346 | 57400 |
| |
| F. Solutions | OH | Blind Rivet | Steel | Plain | 5/32 x .126-.187 | 5/32 dia .126-.187 grip range sb53 steel rivet | 1450 |
|
| F. Solutions | OH | Coated Abrasives (Sanding Belts, Sandpaper , Flap Discs, etc.) | core 2 60 grit laminated lock-r disc | 4 |
| |||
| F. Solutions | OH | Hex Head Cap Screw | Grade 8 | Plain | 3/8-16 x 3 1/2 | hex head cap screw 3/8-16x3-1/2 grade 8 plain | 248 |
|
| F. Solutions | OH | Cotter Pin (Split Pin) | 316, 317, A4 Stainless | Plain | cotter pin 3/16 x 4 316ss | 7 |
| |
| Bossard | AZ | high-temp round silicone rubber cap for 1/4 od | 7570 |
| ||||
| National | Ont | Finished Hex Nut | Steel | Plain | 1/4-20 | 1/4-20 hex nut g5z | 10659 |
|
| Mansco | MI | Socket Head Cap Screw | Class 8.8 | Plain | M8-1.25 x 10 | M8-1.25x10 low hd soc cap scr cl8.8 pln din 7984 | 7355 |
|
| Mansco | MI | Socket Head Cap Screw | Class 12.9 | Zinc/Black | m8-1.25 x 12mm soc cap scr cl12.9 f/t triv blk znc | 1350 |
| |
| AFI | FL | Flat Washer | Nylon (Polyamide) | Plain | 9/16 | 9/16 flat washer nylon () | 1564 |
|
| AFI | FL | Button Head Socket Cap Screw | Steel | Plain | #4-40 x 3/16 | 4-40x3/16 button hd cs steel w/patch () () | 42658 |
|
| AFI | FL | Hex Female/Female Standoff | Steel | Chromate Conversion (Iridite, Alodine) | 5/16 | 5/16 hex female standoff al clr iridite (RAF) () | 1590 |
|
| Global Fa | TX | Helical Screw Thread Repair Insert (Heli-Coil, Tap-Loc etc.) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #2-56 x .086 | 2-56x.086 ss in heli-coilininsertfree-running heli-coil 1185-02cn-0086 | 100 |
|
| AFI | FL | cam lock cam southco cm-c606 | 13 |
| ||||
| Olander | CA | Machine Screw | Steel | Black Oxide | 8-32 x 5/8 phil flat 100 deg stl blk | 14 |
| |
| Olander | CA | Machine Screw | Steel | Zinc/Clear | 8-32 x 3/8 phil flat 100 deg stl zn cr3 | 1800 |
| |
| Olander | CA | Split Lock Washer | Steel | Galvanized | 1/2 split l/w hot dipped galvanized | 246 |
| |
| Olander | CA | 1/4-20 x 1/2 slotted rd polypro () () | 291 |
| ||||
| Olander | CA | Springs (Compression) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | century spring comp spring sst () () | 7 |
| ||
| F. Solutions | OH | Machine Taps | plug tap 2-56 hss | 3 |
| |||
| F. Solutions | OH | Button Head Socket Cap Screw | Steel | Plain | #4-40 x 1/4 | button socket head cap screw 4-40x1/4 alloy steel | 250 |
|
| F. Solutions | OH | Socket Head Cap Screw | ASTM A574 | Plain | 1-8 x 2 3/4 | socket head cap screw 1-8x2-3/4 alloy steel | 23 |
|
| SBS | MA | Lag Screw | Steel | Galvanized | 1/4 x 2 | 1/4x2 hex lag screw h.d.g. | 1075 |
|
| Rapid | NY | Solid Rivet | Aluminum | Plain | 5/32 x 1 5/16 | universal head 2117-t4 aluminum i/a/w rev 2 5/32 x 1-5/16 gold chem film-mil-dtl-5541 MS20470AD5-21 | 154.5772 |
|
| Rapid | NY | Blind Rivet | Titanium | Plain | M. x .469-.500 | 100 deg.shear head hollow end rev.k titanium .187 diam.x.469-.500 grip | 5 |
|
| Rapid | NY | Solid Rivet | Superalloy (Inconel, Hastelloy, Alloy 20) | Plain | 1/8 x 13/16 | univ.head inconel 600 per as7232 i/a/w rev e 1/8 x 13/16 annealed AN123416 | 32.0132 |
|
| Rapid | NY | Installation & Setting Tools | avdel conversion kit for 3/8-16 thread tsn | 1 |
| |||
| Rapid | NY | Solid Rivet | Aluminum | Passivated | 3/16 x 1/2 | univ.head 302-305 stainless steel i/a/w rev 4 3/16 x 1/2 annealed passivated MS20613-6C8 | 67.7848 |
|
| Rapid | NY | Solid Rivet | Superalloy (Inconel, Hastelloy, Alloy 20) | Passivated | 7 3/32 x 3/16 | univ.hd.a-286 stain.steel ams5737 i/a/w rev 7 3/32 x 3/16 annealed passivated NAS1198-3-3 | 5.6016 |
|
| F. Solutions | OH | Hex Head Cap Screw | Grade 5 | Plain | 5/16-18 x 2 | hex head cap screw 5/16-18x2 grade 5 plain | 328 |
|
| Arden | WI | Hex Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M6-1.00 x 55 | M6x1.0x55 hcs a2ss din 933 | inquire |
|
| ASFCORP | MI | Socket Head Cap Screw | Class 12.9 | Dip-Spin, Spray-Spin Basecoat + Topcoats (Dacromet, Doerken, Geomet, Magni, etc.) | M10-1.50 x 180 | m10-1.5 x 180 soc hd cap scw cl 12.9 din 912 iso 4762 magni 565 | 180 |
|
| THRDFAST | AL | Self-Tapping Sheet Metal Screw (types a,b,ab) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #6 x 1/2 | 18-8 ss slotted indented hex washer t/s b18.6.4 | 220 |
|
| THRDFAST | AL | Socket Head Cap Screw | Class 8.8 | Zinc/Clear | M12-1.75 x 50 | socket c/s | 79 |
|
| THRDFAST | OK | Hex Head Cap Screw | Grade 5 | Zinc/Clear | 1 1/8-7 x 3 1/2 | gr5 hex c/s b18.2.1 | 21 |
|
| THRDFAST | OK | Hex Head Cap Screw | Grade 8 | Zinc/Yellow | 1-8 x 3 1/2 | gr8 hex c/s z&y domestic b18.2.1 | 1 |
|
| Eurolink | SC | Cap Nut (Acorn Nut) | Steel | Chrome Plated | M6 | m6 din 1587 brass chrome plated acorn nut high type | 500 |
|
| Lightning | LA | Shoulder Bolt (Stripper Bolt) | Steel | Black Oxide | 1/4 x 1 1/4 (#10-24) | soc sh/b blk | 130 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
