FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| Jackson | MS | Machine Screw | Steel | Zinc/Clear | M8-1.25 x 30 | pan slotted m/s | 198 |
|
| Jackson | MS | Machine Screw | Steel | Plain | M6-1.00 x 50 | pan phil | 715 |
|
| Jackson | MS | Socket Head Cap Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 1/4 x 7/8 | nc socket hd c/s 18-8 s/s | 511 |
|
| Jackson | MS | Tapered Pin | Steel | Plain | 7 x 4 1/2 | taper pin .409 diameter on large end | 50 |
|
| Jackson | MS | Machine Taps | 7/8-9 | nc taper tap (starter tap) | 2 |
| ||
| Jackson | MS | Wing Nut | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16 | nc wing nut 18-8 304 | 35 |
|
| Jackson | MS | Hex Tap Bolt (Fully Threaded) | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | M12-1.75 x 70 | h/b a-2 18-8 304 f/t | 164 |
|
| Jackson | MS | Carriage Bolt | Class 8.8 | Zinc/Clear | M12-1.75 x 30 | M12x1.75x30 grade c/b john deere #03m7198 or equal | 17 |
|
| Jackson | MS | Hex Head Cap Screw | Class 8.8 | Zinc/Clear | M12-1.50 x 80 | fine pitch hex c/s partially threaded | 65 |
|
| Jackson | MS | Socket Head Cap Screw | Steel | Plain | 5/16-18 x 2 3/4 | nc socket hd cap | 290 |
|
| Jackson | MS | Machine Screw | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #10-32 x 3/4 | nf phil truss m/s 18-8 304 | 568 |
|
| Jackson | MS | U-Bolt | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 5/16 x 1 x 2 3/16 1/2 | pipe # 010ss round u bolt stain. | 18 |
|
| Jackson | MS | Socket Head Cap Screw | Steel | Plain | 1-8 x 7 1/2 | nc dom.. socket hd c/s . | 3 |
|
| Jackson | MS | Blind Rivet | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | #1/8 x 3/16 #43 | special order 18-8 304 blind rivet carbon mandrel | 850 |
|
| Jackson | MS | Hex Head Cap Screw | Class 10.9 | Plain | M12-1.75 x 140 | hex c/s partially threaded | 8 |
|
| Jackson | MS | Dowel Pin | Steel | Plain | 1/16 x 1/4 | 510 |
| |
| Jackson | MS | Hex Jam Nut | Grade 5 | Plain | 1-14 | nf l.h. jam nut | 20 |
|
| Jackson | MS | Machine Taps | M20-2.50 | pitch bottoming tap | 6 |
| ||
| Jackson | MS | Hex Head Cap Screw | Class 10.9 | Plain | M10-1.25 x 25 | fine hex c/s f/t | 93 |
|
| Jackson | MS | Socket Head Cap Screw | Class 12.9 | Plain | M4-0.70 x 20 | socket hd c/s | 445 |
|
| Global | CA | sos-3.5m3-4 pem SOS35M34 | 927 |
| ||||
| Global | CA | fh-256-10 pem FH25610 | 171 |
| ||||
| Jackson | MS | Hex Head Cap Screw | Class 8.8 | Plain | M20-1.50 x 70 | fine pitch hex c/s f/t | 4 |
|
| Jackson | MS | Self-Tapping Sheet Metal Screw (types a,b,ab) | Steel | Zinc/Clear | 5/16-9 x 1 1/4 | indented hex tapping | 1406 |
|
| Jackson | MS | Masonry & Concrete Drill Bits | 3/8 x 18 | oal 16 useable sds-plus masonry hammer drill bit 160 pt | 7 |
| ||
| Jackson | MS | Bent Anchor Bolt (J-Bolt, L-Bolt) | Steel | Galvanized | 3/4-10 x 26 x 4 | h 5rt l-shape anchor bolt hdg | 2 |
|
| Jackson | MS | Hex Head Cap Screw | Grade B7 | Zinc/Clear | 3/4 x 7 | nc b-7 hex c/s | 19 |
|
| Jackson | MS | Hex Head Cap Screw | 316, 317, A4 Stainless | Plain | M12-1.75 x 60 | h/b a-4 stainless | 551 |
|
| Jackson | MS | Bent Anchor Bolt (J-Bolt, L-Bolt) | Steel | Plain | 1/2 x 6 | anchor j-bolt w/ 4 of thread and 1 hook at 60 degree angle | 103 |
|
| Jackson | MS | Spike-Drive Anchor (Flat, Mushroom) | Steel | Zinc/Clear | 1/4 x 6 1/2 | 1/4x6-1/2 bent nail anchor hammer in spike itw buildex discontinued when stock is depleted | 192 |
|
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
