FCH Member Advertisement
FCH News
| Buy from one of our FCH Network Members | ||||||||
|---|---|---|---|---|---|---|---|---|
| Supplier | Loc | Type | Material | Finish | Size | Description | Qty | |
| METRO IND | OH | Bolt & Screw Extractors | Steel | 3/32 x 5/32 | 3/32 x 5/32 square screw extractor #1 hss | 12 |
| |
| Jackson | MS | Sockets | 3/8-24 x 3/8 | 3/8-24 x 3/8 nf socket set with nylon patch | 24 |
| ||
| METRO IND | OH | Bolt & Screw Extractors | Steel | 3/8 x 5/8 | 3/8 x 5/8 square screw extractor #5 hss | 6 |
| |
| METRO IND | OH | Abrasive Shop Rolls, Taper Rolls, etc. | 3/32 x 3/4 x 1/8 | 3/32 x 3/4 x 1/8 shank cartridge roll mandrel standard abrasives | 6 |
| ||
| OneMonroe | MN | Measuring Tools | Chrome Plated | 33 x 1 | 33 x 1 tape measure chrome/abs case w/1/8 easy to read markings 6/case | 4 |
| |
| Ababa | CA | Abrasive Shop Rolls, Taper Rolls, etc. | 31/2 x 1 1/2 x 1/8 | 3m 1/2 x 1 1/2 x 1/8 cartridge roll 80 grit | 42 |
| ||
| OneMonroe | NC | Measuring Tools | Galvanized | 3 x 1 1/2 x 12 | 3 x1-1/2 x12 galvanized slotted angle12 gauge heavy duty | 5 |
| |
| METRO IND | OH | Measuring Tools | 3/4 x 16 | 3/4 x16 lufkin tape measure metric/inch high vis orange | 3 |
| ||
| METRO IND | OH | Measuring Tools | 3/4 x 16 | 3/4 x16 stanley tape measure metric/inch yellow | 2 |
| ||
| METRO IND | OH | Wrenches | 3/4 x 19 | 3/4 x 19 3/4 gear wrench flex head ratchet | 1 |
| ||
| METRO IND | OH | Bolt & Screw Extractors | Steel | 3/8 x 2 | 1 3/8 x 2 square screw extractor #9 hss | 2 |
| |
| Ababa | CA | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | 3/32 x 2.12 | 3/32 x 2.12 straight hex key alloy | 64 |
| |
| Ababa | CA | Hand Taps | 3/8-16 x 4 | 3/8-16 4 flute sti bottom hand tap | 2 |
| ||
| OneMonroe | NC | Hammers & Mallets | 3/4 x 4 x 6 | 3/4 x 4 x 6 speedemon red granite carbide tipped hammer drill bit | 2 |
| ||
| OneMonroe | NC | Sockets | 3 x 42 | 3 x 42 universal absorbent sock w/cellulose blend filling 40/case | 1 |
| ||
| OneMonroe | NC | Sockets | 3 x 48 | 3 dia x 48 l universal cellulose absorbent sock 30/case | 1 |
| ||
| Jackson | MS | Installation & Setting Tools | Steel | Zinc/Clear | 3/8 x 5 | anchor setting tool | 220 |
|
| OneMonroe | MN | Hammers & Mallets | 3/4 x 6 x 8 | drill bit 3/4 x 6 x 8 speedhammer | 1 |
| ||
| OneMonroe | NC | L-Wrenches, Allen Wrenches & Torx Wrenches | 3/16 x 6 | 3/16 x 6 hex key t-handle | 34 |
| ||
| OneMonroe | NC | Measuring Tools | 3 x 80 | 3 x 80 gauge x 1000 stretch film with handle 18rolls/case | 18 |
| ||
| B & K FAST | PA | L-Wrenches, Allen Wrenches & Torx Wrenches | 3/32 x 9 | 3/32 x 9 allen hex key t | 15 |
| ||
| OneMonroe | NC | Hammers & Mallets | 3/8 x 10 x 12 | 3/8 x 10 x 12 speedemon red granite carbide tipped hammer drill bit | 17 |
| ||
| OneMonroe | NC | Hammers & Mallets | 3/4 x 10 x 12 | 3/4 x 10 x 12 speedemon red granite carbide tipped hammer drill bit | 3 |
| ||
| OneMonroe | MN | Chisels & Punches | 3 x 12 | scaling chisel 3 x 12 | 2 |
| ||
| SII | IN | Measuring Tools | 3/4 x 12 | lufkin 3/4 x 12 chrome tape measure | 7 |
| ||
| Ababa | CA | Wrenches | 3/8 x 12 | comb. speed wrench 2-way locking 3/8 12 pt | 1 |
| ||
| Ababa | CA | Wrenches | 3/4 x 12 | comb. speed wrench 2-way locking 3/4 12 pt | 3 |
| ||
| OneMonroe | MN | Files, Rasps & Planers | Aluminum | 3/8 x 13 x 80 | 3/8 x 13 x 80# alum ox file belt | 10 |
| |
| SII | IN | Measuring Tools | Steel | Plain | 3/4 x 14 | 3/4 x 14 gauge plain finish narrow machinery bushing | 700 |
|
| Jackson | MS | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | Plain | 3/32 | torx t-9 short arm bit hex l-shape key | 25 |
|
| Jackson | MS | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | Plain | 3/32 | hex key short arm | 123 |
|
| Jackson | MS | Chisels & Punches | 300 Stainless (A1,A2, 18-8,304,310 etc.) | Plain | 3/8-16 | nc center locknut 18-8 s/s 2 punch style | 300 |
|
| Jackson | MS | Sockets | 3/4 | drivex7/8 impact socket 8 point also for square drive applications | 2 |
| ||
| Jackson | MS | Sockets | 3/4 | dr. socket retaining ring drive 1.50 or 38mm grey pneumatic #3110 or equal | 4 |
| ||
| Jackson | MS | Sockets | Steel | 3/4 | drivex1-7/16 impact socket 6 point grey pneumatic # 3046r or equal | 3 |
| |
| Jackson | MS | Sockets | 3/4 | drive 8 piece deep impact socket 6 point set wright brand set # 608 7/8 thru 1-1/2 | 4 |
| ||
| Jay-Cee | MI | Installation & Setting Tools | 3/8-24 | mandrel for bp60 b38-24 | inquire |
| ||
| Jay-Cee | MI | Installation & Setting Tools | 3/8 | brazier hd set for air hammer | 1 |
| ||
| Jay-Cee | MI | Installation & Setting Tools | 3/8-16 | mandrel for firebird | 2 |
| ||
| Jay-Cee | MI | Installation & Setting Tools | 3 | 702a40 3 extension for 702 pulling hd | inquire |
| ||
| Jay-Cee | MI | Installation & Setting Tools | 3/8-16 | mandrel for the sp-160 | inquire |
| ||
| Jay-Cee | MI | Service & Repair Kits | 325 | rn mandrel kit 10-24 10-32 1/4-20 5/16-18 3/8-16 | 2 |
| ||
| Jay-Cee | MI | Service & Repair Kits | 325 | rn mandrel kit for m5 to m10 | 2 |
| ||
| Jay-Cee | MI | Installation & Setting Tools | 3/8-16 | mandrel for 150sp/kj40 | 3 |
| ||
| Jay-Cee | MI | Installation & Setting Tools | 3/8-16 | mandrel for bp60 | 1 |
| ||
| Jay-Cee | MI | 3/8-16 | set up for 803rn | inquire |
| |||
| Jay-Cee | MI | 3/8-16 | spin spin head set for | inquire |
| |||
| Jay-Cee | MI | Installation & Setting Tools | 3/16 | 2458 guide skirt for | inquire |
| ||
| Jay-Cee | MI | Installation & Setting Tools | Steel | 325 | rn carrying case | inquire |
| |
| Jay-Cee | MI | Service & Repair Kits | 3/8 | adapter kit for hk-150 hand tool | inquire |
| ||
| Jay-Cee | MI | Installation & Setting Tools | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 3 | 3lc-2cu6 18-8 304 collar | inquire |
| |
| Jay-Cee | MI | Installation & Setting Tools | 3 | 3lc-2r12g collar | 100 |
| ||
| Jay-Cee | MI | Service & Repair Kits | 3/16-32 | kit | inquire |
| ||
| Jay-Cee | MI | Service & Repair Kits | 3/8-20 | kit | 1 |
| ||
| Jay-Cee | MI | Service & Repair Kits | 3/4-12 | kit | inquire |
| ||
| Jay-Cee | MI | Service & Repair Kits | 3/8-19 | kit | inquire |
| ||
| Jackson | MS | Sockets | 3/4 | 3/4 drive x 7/8 impact socket 8 point also for square drive applications | 2 |
| ||
| OneMonroe | MN | Sockets | Black Oxide | 3/8 | 3/8 dr deep imp skt 7/16 sae 6pt blk | 8 |
| |
| OneMonroe | MN | Sockets | Black Oxide | 3/8 | 3/8 dr deep imp skt 1/2 sae 6pt blk | 15 |
| |
| OneMonroe | MN | Measuring Tools | 33 | 33 tape measure-discontinued | 23 |
| ||
| OneMonroe | MN | Installation & Setting Tools | Steel | 3/8 | setting tool h/s hollow 3/8 | 6 |
| |
| OneMonroe | MN | Installation & Setting Tools | Steel | 3/8 | 3/8 snake+ setting tool | 1 |
| |
| Set Screw | IL | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | Black Oxide | 3/32 | short arm key usa made | inquire |
|
| B & K FAST | PA | Installation & Setting Tools | Steel | 3/8 | 3/8 drop in anchor setting tool | 1 |
| |
| TSF | TX | Hand Taps | 3/8-16 | hss hand tap bottom style 3/8-16 | 1 |
| ||
| TSF | TX | Hand Taps | 3/8-24 | hss hand tap taper 3/8-24 | 4 |
| ||
| Jay-Cee | MI | Installation & Setting Tools | 3/4 | reach 0-1/2 gap 2-3/16 body length | 22 |
| ||
| Jay-Cee | MI | Installation & Setting Tools | 3/4 | reach 0-1 gap 2-3/16 body length | 4 |
| ||
| SII | IN | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | 3/4 | 3/4 alloy 8650 long arm hex key) | 9 |
| |
| SII | IN | L-Wrenches, Allen Wrenches & Torx Wrenches | 3.5 | 3.5m ball end l-wrench) | 30 |
| ||
| SII | IN | Chisels & Punches | 3/4 | 3/4 wood chisel | 6 |
| ||
| Jay-Cee | MI | Installation & Setting Tools | 3/8-16 | 3/8-16 kit for riv 938 tool | inquire |
| ||
| Set Screw | IL | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | 3/32 | short arm hex key black | inquire |
| |
| Set Screw | IL | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | 3/8 | short arm hex key black | inquire |
| |
| Set Screw | IL | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | 3/16 | short arm hex key black | inquire |
| |
| Set Screw | IL | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | 3/16 | long arm hex key black | inquire |
| |
| Set Screw | IL | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | 3/32 | long arm hex key black | inquire |
| |
| SII | IN | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | 3/32ba | 3/32 balldriver l-wrench) | 25 |
| |
| SII | IN | Service & Repair Kits | 3 | needle packing kit of 3 | 0.667 |
| ||
| METRO IND | OH | Wrenches | 3/8 | 1 3/8 anchor combination wrench | 1 |
| ||
| METRO IND | OH | Wrenches | 3/8 | 3/8 to 1 1/4 anchor sae combination wrench set 14pc | 1 |
| ||
| METRO IND | OH | L-Wrenches, Allen Wrenches & Torx Wrenches | 3/16 (3/8) | 3/16 x 3/8 hex key set fold up 5pc set bondhus gorilla grip | 1 |
| ||
| METRO IND | OH | Service & Repair Kits | 3 | 3 sizes pneumatic tie rod/ball joint separator kit | 1 |
| ||
| METRO IND | OH | Hammers & Mallets | 3 | 3 cfm ingersoll-rand air hammer kit | 1 |
| ||
| METRO IND | OH | Sockets | 3/4 | 3/4 proto 12 point impact socket 1/2 drive | 1 |
| ||
| METRO IND | OH | L-Wrenches, Allen Wrenches & Torx Wrenches | 3/8 | 3/8 replacment clips for universal rail 10 pack wiha 91110 | 4 |
| ||
| METRO IND | OH | Knives, Razors, Multifunction Tools | 3 | side lock utility knife 3 notch | 17 |
| ||
| SII | IN | Service & Repair Kits | 3 | 3m performance pressure hvlp atomizing head refill kit 26811 yellow 1.1 10 pack | 4 |
| ||
| SII | IN | Pliers | 321-4 1/2 | d321-4-1/2 c n/n pliers | 7 |
| ||
| Ababa | CA | L-Wrenches, Allen Wrenches & Torx Wrenches | 3/32 | 3/32 l.a. multi-ang hex key | 6 |
| ||
| Ababa | CA | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | 3/16ba | 3/16 balldriver t-handle wrench | 5 |
| |
| Ababa | CA | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | 3/16ba | 3/16 balldriver t-handle wrench | 3 |
| |
| Ababa | CA | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | 3/8ba | 3/8 balldriver t-handle wrench | 3 |
| |
| Ababa | CA | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | 3/8ba | 3/8 balldriver t-handle wrench | 1 |
| |
| Ababa | CA | L-Wrenches, Allen Wrenches & Torx Wrenches | 3/32 | 3/32 graduated length hex t-handle wrench | 16 |
| ||
| Ababa | CA | L-Wrenches, Allen Wrenches & Torx Wrenches | 3/16 | 3/16 graduated length hex t-handle wrench | 6 |
| ||
| Ababa | CA | Installation & Setting Tools | Steel | 3 | 3 cotton tipped applicator | 1000 |
| |
| Ababa | CA | Hand Taps | 3/4-10 | 3/4-10 bottom h.s. hand tap | 5 |
| ||
| Ababa | CA | Hand Taps | 3/4-10 | 3/4-10 bottom h.s. hand tap | 2 |
| ||
| Ababa | CA | Hand Taps | 3/4-16 | 3/4-16 bottom h.s. hand tap | 3 |
| ||
| Ababa | CA | Hand Taps | 3/4-16 | 3/4-16 bottom h.s. hand tap | 2 |
| ||
| Ababa | CA | Hand Taps | 3/8-16 | 3/8-16 bottom h.s. hand tap | 18 |
| ||
| Ababa | CA | Hand Taps | 3/8-16 | 3/8-16 bottom h.s. hand tap | 4 |
| ||
| Ababa | CA | Hand Taps | 3/8-24 | 3/8-24 bottom h.s. hand tap | 5 |
| ||
| Ababa | CA | Hand Taps | 3/8-24 | 3/8-24 bottom h.s. hand tap | 3 |
| ||
| Ababa | CA | L-Wrenches, Allen Wrenches & Torx Wrenches | 3/32 | 3/32 short arm hex wrench | 9 |
| ||
| Ababa | CA | L-Wrenches, Allen Wrenches & Torx Wrenches | 3/32 | 3/32 short arm hex wrench | 1 |
| ||
| Ababa | CA | L-Wrenches, Allen Wrenches & Torx Wrenches | 3/16 | 3/16 short arm hex wrench | 10 |
| ||
| Ababa | CA | L-Wrenches, Allen Wrenches & Torx Wrenches | 3/16 | 3/16 short arm hex wrench | 2 |
| ||
| Jay-Cee | MI | 37 | hds-m6 hex drive spring no37 & no38 | inquire |
| |||
| Jay-Cee | MI | 37 | hds-m8 hex drive spring no37 & no38 | inquire |
| |||
| Jay-Cee | MI | Installation & Setting Tools | 3/8-24 | mandrel for bp60 | inquire |
| ||
| Jay-Cee | MI | Installation & Setting Tools | 3/8-24 | 1/2-13 MANDREL FOR 160SP/ M71345410 | inquire |
| ||
| Ababa | CA | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | 3/8 | 3/8 short arm hex key stl | 139 |
| |
| Ababa | CA | L-Wrenches, Allen Wrenches & Torx Wrenches | 3/8 | 3/8 graduated length hex t-handle wrench | 3 |
| ||
| Ababa | CA | Wrenches | 3/4 | 3/4 flex hd open end ratchet wrench | 1 |
| ||
| SII | IN | Service & Repair Kits | 3 | 3m performance spray gun rebuild kit 26840 4 kits/case | 4 |
| ||
| YANKEE | NH | L-Wrenches, Allen Wrenches & Torx Wrenches | 3/8 | 3/8 short arm hex l key | 5 |
| ||
| Jay-Cee | MI | Service & Repair Kits | 3/8-16 | kit | inquire |
| ||
| YANKEE | NH | Measuring Tools | 30 | 30 leaf 4-42 unc/f thread pitch gage | 1 |
| ||
| YANKEE | NH | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | 3/16 | 3/16 bondhus balldriver hex driver | 2 |
| |
| YANKEE | NH | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | 3/8 | 3/8 bondhus balldriver hex driver | 5 |
| |
| YANKEE | NH | Wrenches | 3/16ba | 3/16 ball driver l wrench | 2 |
| ||
| YANKEE | NH | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | 3/8ba | 3/8 balldriver l wrench 6.8 long | 3 |
| |
| YANKEE | NH | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | 3/16 | 3/16 t-handle 9.1 l balldriver | 1 |
| |
| YANKEE | NH | L-Wrenches, Allen Wrenches & Torx Wrenches | 3/8 | 3/8 long arm hex key | 36 |
| ||
| YANKEE | NH | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | 3/32 | 3/32 hex long arm (3-7/16 ) hex key steel | 101 |
| |
| YANKEE | NH | L-Wrenches, Allen Wrenches & Torx Wrenches | 3/32 | 3/32 short arm hex l key | 248 |
| ||
| RePneu To | MI | Installation & Setting Tools | Steel | 3/16 | nose tip sr 3/16 | 2 |
| |
| RePneu To | MI | Installation & Setting Tools | Steel | 3/16 | nose tip 3/16 | 12 |
| |
| RePneu To | MI | Installation & Setting Tools | Steel | 3/16 | nose tip sr 3/16 | 2 |
| |
| RePneu To | MI | Wrenches | 3/16 | pop proset76002-00003 xt2 hydro-pneumatic blind rivet tool with mandrel collection system 1/8 inch 5/32 inch and 3/16 inch | 7 |
| ||
| RePneu To | MI | Service & Repair Kits | 30 | 30 ml luer slip syringe (soft-ject) for priming kit | 35 |
| ||
| OneMonroe | NC | L-Wrenches, Allen Wrenches & Torx Wrenches | 3/16 | 3/16 long hex key | 83 |
| ||
| OneMonroe | NC | L-Wrenches, Allen Wrenches & Torx Wrenches | 3/16 | 3/16 short hex key | 15 |
| ||
| Weaver | WA | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | Plain | 3/32 | 3/32 short arm hex key plain | 208 |
|
| Weaver | WA | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | Plain | 3/16 | 3/16 short arm hex key plain | 188 |
|
| Weaver | WA | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | Plain | 3/8 | 3/8 short arm hex key plain | 34 |
|
| Weaver | WA | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | Plain | 3/32 | 3/32 t handle hex key plain | 15 |
|
| Weaver | WA | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | Plain | 3/16 | 3/16 t handle hex key plain | 6 |
|
| Weaver | WA | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | Plain | 3/8 | 3/8 t handle hex key plain | 3 |
|
| SII | IN | Service & Repair Kits | 3 | 3m accuspray atomizing head 16611 clear 1.8 mm 4 per kit 6 kits per case | 6 |
| ||
| Jay-Cee | MI | Installation & Setting Tools | 300 Stainless (A1,A2, 18-8,304,310 etc.) | 32 | 32 piece kit. contains die sizes 3/32 1/8 5/32 & 3/16 for semi-tubular roll over oval head sets universal head sets & dimple die sets (male & female).assorted flush sets. custom foam molded box w/1-1/2 & 3 yoke. 18-8 304 tool. | inquire |
| |
| Jay-Cee | MI | Installation & Setting Tools | 302 | 302e blind riveter tool rental | inquire |
| ||
| ACCURATE | IL | Hand Taps | 3/8-16 | tap hss usa hand tap-plug | 4 |
| ||
| ACCURATE | IL | Hand Taps | 3/8-24 | tap hss usa hand tap-plug | 1 |
| ||
| ACCURATE | IL | 3/8-16 | tap plug hss spiral point usa | 2 |
| |||
| ACCURATE | IL | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | Plain | 3/32 | hex wrenches short arm | 1200 |
|
| ACCURATE | IL | L-Wrenches, Allen Wrenches & Torx Wrenches | 3/32 | hex wrenches short arm (made in usa) | 50 |
| ||
| ACCURATE | IL | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | Plain | 3/8 | hex wrenches short arm | 10 |
|
| OneMonroe | NC | L-Wrenches, Allen Wrenches & Torx Wrenches | 3/16 | allen 57310 3/16 hex cushion grip t-handle #780 | 16 |
| ||
| OneMonroe | NC | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | 3/32 | 3/32 balldriver l-wrench | 400 |
| |
| OneMonroe | NC | L-Wrenches, Allen Wrenches & Torx Wrenches | Steel | 3/32 | 3/32 balldriver l-wrench | 50 |
| |
| OneMonroe | NC | Sockets | 3/4 | 3/4 six point deep socket | 5 |
| ||
| OneMonroe | NC | Abrasive Shop Rolls, Taper Rolls, etc. | 3 | 3m psa cloth disc 348d 12 x nh 80 x-weight | 10 |
| ||
| OneMonroe | NC | Hammers & Mallets | Grade 8 | 3/8 | 3/8 grade 80 alloy hammerlok connecting link (imp) | 20 |
| |
| OneMonroe | NC | Clamps (Straight Line, Vertical, Horizontal, etc.) | 3/4 | 3/4 max flange thickness beam clamp | 100 |
| ||
| OneMonroe | NC | Service & Repair Kits | 3 1/2 | 3-1/2in brake kit | 64 |
| ||
| OneMonroe | NC | Service & Repair Kits | 3 | 3in brake kit | 69 |
| ||
| OneMonroe | NC | Service & Repair Kits | 3 1/2 | 3-1/2in brake kit | 4 |
| ||
| OneMonroe | NC | Clamps (Straight Line, Vertical, Horizontal, etc.) | Galvanized | 3/4-10 | 3/4-10 galv small (3/4) throat univ top beam clamp | 7 |
| |
| OneMonroe | NC | Measuring Tools | 3/8-16 | tubing id 1-1/4 16-18 gauge threaded adapter 3/8-16 w/4 sided grater clip 1.22 od | 168 |
| ||
Trademarks identified with products listed on this website are the property of their respective owners, not FastenersClearingHouse.com.
